How to crop the usual sim card under micro. How to make a micro sim card from ordinary sim card

Today, the usual Simka for many phones may already be outdated, since, for example, the fourth iPhone model supports only a new format. Of course, you can just take and replace your SIM card on micro, buying it in the store, and the problem will be solved. But then all the contacts of friends and acquaintances are lost, which are recorded on the room. In addition, probably connected to it tariff plan mobile operator.

As they say, there is always a way out. A micro-sim card can be obtained from a conventional SIM card due to its reduction (not the number of contacts decreases, and the amount of plastic around them) by trimming. In this case, the model functions in the same way as the standard option.

How to trim the standard "sim card" under micro

This will require some free time and patience, as well as the corresponding tool:

sandpaper
pencil
rule
sharp scissors

The working surface should remain not touched, only some of the protective casing is cut.

Dimensions

Crimping process

All information is stored on a chip, which is twice as smaller than plastic casing, therefore, getting rid of extra millimeters, you can easily turn the standard SIM card into a micro-card.

First of all, it is necessary to make marking on which the card will be cut. With the help of an acutely sharpened pencil around the chip, a rectangle in size is 15x12 mm. Sometimes there are enlarged SIM cards, cut which will have to foil. It will be more complicated to do it, but if you take this procedure carefully, you can get a beautiful micro sim.
Then sharp scissors cut off part of the plastic, it is better to use manicure small scissors, as they not big size And sharp enough. After the process is completed, a small corner of the card is trimmed.

Bringing a circumcised SIM card to an ideal state

Cutting your card, compare its size with a slot in your mobile device where it will be inserted. All the joints must converge perfectly, otherwise it will need to cut a little again. Next, to remove extra, sandpaper is used.

As you can see, this procedure does not require any particular difficulties, so it's not necessary to be afraid, take the tool and act. If you still do not decide to implement it yourself, you can go to the service center, where your SIM card is easy to file with a special tool, externally resembling a stapler. But this will have to spend a certain time, and the service will not be free, while this procedure does not require special complexity.

Many modern mobile devices use non-standard SIM cards, but their reduced "fellow". Therefore, the question arises very often: how to cut the SIM card so that it is inserted without any problems in the slot intended for it. Consider why the manufacturers began to use the "cropped" sim cards.

In pursuit of perfection, manufacturers of mobile devices invent different types of innovation and actively implement them. However, more recently, in addition to improving software And the expansion of the functional they try to overtake others with respect to the size and weight of the device. Thus, devices become flatter and wide and smallest.

The main motive for reducing the SIM card was saving space inside mobile device. The SIM card reduces that allows you to free up the additional space in order to place the items more compact. By the way, the first phone that works on a reduced SIM card - iPhone 4.

SIM card in English - subscriber identifier module. SIM card technology is used by operators cellular communication To provide services and identify network subscribers.

In addition to the standard SIM card format, mini-sim (minisim), micro-sim (nanosim) and Nanosim are used now. All specified formats are derivatives from the first SIM card, which was comparable in size with bank cards.

That is, on an example of a decrease in the size of SIM cards, you can trace the evolution of mobile devices, which is also a relatively new term, previously mobile phones were mobile. But since 2009 began to be developed mobile plates And other gadgets using mobile communications.

So, the usual format format Minisim is suitable for a variety of phones, released in the period until 2011.
Map Microsim is used in iPhone4 / 4S, a number of models Nokia Lumia., Sony, Samsung and others
The Nanosim card is still intended only for iPhone5 / 5S.

Adapt mini-sim under micro-sim at home

In practice, there are often situations when when purchasing a mobile device, you have not been warned that micro-sim will be needed to communicate. Or you use the same SIM card for quite some time, and there was a need to trim it up to the desired size. How to cut a sim card to micro-sim, we will look at further.

A mini sim card is a rectangle with one cut angle and 25 mm parameters * 15mm * 0.75mm. And it consists of a plastic base in which the chip identifier is enshrined. Naturally, the main detail of this design is the chip itself. When damaged, the mobile device will not be able to receive a signal. mobile communicationsTherefore, the use of a damaged SIM card is impossible. Therefore, when circumcised SIM cards at home should be very attentive.

In order to correctly perform all the procedures, you will need scissors, the sharp, writing device - a pencil or pen, better ball, an accurate line.

From mini-sim card micro-sim differ in size. Its parameters - 15 * 12 * 0.76 mm.

Consider the process of transformation of the map in Microsim.

The card for the procedure must be put the chip up so that it is always visually available, and turn it out so that the cut edge "watched" up is to the left.
On the right side, which is 15 mm, reflect 1.5 mm to the center and cut the excess plastic strip.
The bottom of the card, which makes up 25 mm, shorten by 1 mm. Also measuring the ruler, you watched a clear line and carefully cut by scissors.
In order for the right edge of the map to make a distance of 12 mm, it is necessary to cut off from the top edge of 2 mm. Then we get 15 mm - 1 mm - 2 mm \u003d 12 mm - the MICROSIM width you need. We produce this action also carefully, like all the previous ones, while do not worry that you substantially shorten the cut corner, it will later be restored.
The length of the micro-sim is 15 mm. In order not to calculate the number of cut millimeters, simply with the right edge of 15 mm from the right edge, they will read the strip on the line and take it superfluous.
It turned out a blank for micro-sim.
If you paid attention, you know that the angles of the SIM card are not perfectly straight, but slightly rounded. Therefore, you need to slightly cut them with scissors so that they match the original.
The last corner is cut on all SIM cards of all formats. The cut looks like an anoscele triangle with the sides of 2 mm.
We apply a ruler to the upper left corner, and refers 2 mm down and right. We connect the obtained points and cut off the resulting triangle.
Micro SIM card is ready.

We try in the corresponding slot. If suddenly it is great, you can cut it some more, and if you suddenly make a mistake in the process of circumcision, you will have to acquire new map Or ask the cellular operator to restore spoiled. By the way, now you can find a lot of video instructions everywhere, how to crop the SIM card. It is better to do this, looking at the pictures and other graphics.

Cut the mini-sim to nano-sim

As noted above, there is another SIM card format, which has recently acquires additional popularity - nano-sim.

Nano SIM card parameters - 12.3 mm * 8.8 mm * 0.67 mm. That is, practically you have a chip without plastic. In addition, Nano - sim little is that tiny, it is also thinner than the usual mini or micro-sim 0.09 mm. The chip area of \u200b\u200ball models of SIM cards regardless of year of production is the same, so any card of the above formats can be turned into a nano-sim.

For the procedure will be required:

sharp scissors;
well sharpened pencil or ordinary ballpoint pen;
accurate ruler or caliper;
Simka mini-sim;
sandpaper;
paper;
double sided tape.

In this manual, a method is proposed, different from what is presented when circumcised by micro-sim.

It is necessary to draw in advance on the sheet to draw the scheme of the future SIM card Nanosim. According to the above parameters, the rectangle with the sides of 8.8 mm and 12.3 mm. It is known that the cut edge in nano-sym of less than 1 mm. Therefore, it will be performed at the very end of the procedure.
We have a SIM card in such a way that the cut angle is to the left above. The card must lie with chip up to avoid damage.
Cut our workpiece.
Attach it in such a way that the chip is under the billet and did not look out from under it. Perform this action is better armed with double scotch.
Then we plan the markup with a pencil, which we will crop the map.
Scissors carefully cut out nano-"SIM card" from a mini or micro SIM card.
We check whether it is suitable for a slot in width and height. If, yes, it means everything is fine.
It remains to solve problems with thickness. To do this, use emery paper. Naturally, it is necessary to remove the extra "completeness" with the opposite side of the sides chip. Anyone, even the most minor damage to the SIM card chip can cause a failure in the work, so be careful.

The final stage is a re-fitting nano-sim in a slot. Everything came out - excellent, it means that the operation was successful.

Where and how else to modify the old SIM card

If the option with an independent cutting down of a new SIM card is not suitable for you, you can use a simpler and less materially responsible way - the replacement of the SIM card from the cellular operator.

To do this, you can just come to the supplier's office, and, presenting a passport, get a new SIM card instead of the old one. The new SIM card is a mini-sim, from which you can "get" micro-sim. The micro-sim borders are perforation by clicking on which you can squeeze a smaller map.

The new SIM card completely replaces the old in case you do not acquire a new SIM card, but ask for the replacement of the old one. During the day, the former SIM card will be disabled, and the balance on the personal account will be available on the new SIM card. All subscriptions and the tariff plan are also saved.

To obtain a nano-sim procedure for converting one SIM card to another is not yet implemented. But, the operator can book a new Nano SIM card and after some time get it to use. It is important to know that this is a free service. And, if suddenly, in the office of the operator, you will be asked to pay a new nano-sim, know, it is not legitimate.

And if you do not have the opportunity to wait for the delivery of nano-sim, then you can try to make it yourself or use the logging service. In household appliances stores, mobile operators salons or mobile service workshops are provided with a logging service nano-sim from any format. This procedure is performed by an apparatus similar to the stapler, and stands within up to 350 rubles.

On old, non-sensory models of phones, and on many sensory devices, there was a slot for SIM-cards of large size. But in modern mobile devices, the slot has become much smaller, and already normal map Not suitable.

By changing the old mobile device on a new gadget, there is no desire to acquire a new SIM card. You can visit the sales office of your operator and change the old SIM card to the new one, while saving all available funds, tariff and connected options on it. But some users prefer to do everything on their own at home. Therefore, Introduced step-by-step instructionsHow to make micro-sim from a regular SIM card.

From the article you will learn

Why was the SIM card standard been reduced?

What are the manufacturers of mobile devices proud of first? Of course, its compactness and relative ease. And to perform these tasks, you need to reduce the selected spaces, including under the SIM card slot.

For the old SIM standard, a lot of space was used, and if you significantly reduce the size of the card, then the place under the slot will be allocated an order of magnitude less, a variety of manufacturers agreed with this. And now that the new device worked from the selected communication operator, you need to either purchase a new SIM card size, or to cut the already existing slot size.

What standards are used in the latest gadgets?

In addition to the usual size, a familiar to many owners of old phones, manufacturers use Mini, Micro and Nano-SIM slots.

SIMITY SIMICS MICRO is required for apple devices Generations 4 / 4S, Nokia Lumia, Sony, Samsung and other manufacturers. But Nano size will be needed for the iPhone of the 5 / 5S series and the newer, as well as on new devices from different manufacturers running the popular OS android.

Cut the sim card under micro-sim

Buying a device, not all sellers warn about the need to install a micro-sim card in a new mobile gadget. And this sometimes discovers the user when he tries to insert an old SIM card in a completely unsuitable slot for her. Or it's just a pity to part with your tariff and a list of available services that are directly related to an existing card.

Normal Size Card has parameters 25 mm x 15 mm x 0.75 mm. It is a durable plastic with an applied chip, it is it that is the main component.

If the chip is at least damaged to a little, then it will be impossible to use the communications of the mobile operator. It is this condition that must be the main thing when fitting a cinear sim card under the form of micro-sim. Cutting needed very carefully.

Required tools

To at home, you can independently adjust the SIM card for the options you need, go back to the next set of tools:

Manicure sharp scissors;
Sharpened pencil or ballpoint handle;
A line with marking millimeters.

The size you need will be 15 mm. X 12 mm. X 0.75 mm.

Crimping process

Put the card on a flat surface so that the chip is outside;
Turn it off the circumciphered side up, so that the angle is watching left;
From the side of 15 mm (right), we postpone the center of 1.5 mm, excessively cut off;
On the bottom side of 25 mm long laying 1 mm also towards the center, black and cutting it on it;
We need the right side of a 12 mm long map. To do this, draw the line from the top to the center of 2 mm. As we have already cut off earlier, we have exactly 12 mm, that is, the desired parameter. But at the same time, the angle will cut. It is not necessary to worry because it will not be restored;
Now we need to align the desired length, that is, 15 mm: starting on the right side, measure the specified distance, you removely remove with scissors. It is not sim card, but only its billet;
Now you need to round all the angles a little, because it was exactly that the former SIM card looked like;
The last barcode is trimming the angle. It is necessarily present on all maps - we need to draw an equilateral triangle with the parties 2 mm. Attach a ruler, measure 2 mm down and right, and then you can cut.

We try to insert the resulting sample

If everything is done correctly, the SIM card must accurately enter the slot installed for it. If she is a little big, then cut down the side that is more.

The network must be found, and if so, then try to call anyone. In case of failure or damage chip, you will have to access the operator for the restoration of your SIM card.

The owners of modern gadgets often have a problem with installing a SIM card in a smartphone. This is due to the fact that new devices often support Nano-Sim format. The size of the standard SIM card is greater. How to cut a sim card under Nano-Sim?

Advantages of Nano-Sim

This format is rapidly gaining popularity among mobile gadget manufacturers. First, Apple, and after her Samsung, Nokya and others began to produce smartphones under a new format. What is it connected with? Here are the advantages of Nano-Sim:

compact size;
several levels of protection against unauthorized access;
phone book for several thousand numbers;
enhance the speed of internet access;
increased operation time;
the new architecture allowed to use more capacious batteries, as well as reduce the thickness of gadgets.

How to cut a sim card under Nano we will look below. Let's see what the difference between them.

Types of cards

First consider the types of SIM cards. Share:

Standard SIM card. Dimensions: 25x15x0.76 mm. Allows you to store up to 250 contacts, as well as operator service information.
Micro-Sim.. Dimensions 15x12x0.76 mm. Standard suggested and still uses everywhere apple company. The format is put in the ipads and the first generations of iPhones.
Nano-Sim.. Dimensions 12x9x0.68 mm. Used in modern modifications of iPhones, flagships and ultra-thin models of other companies. The thickness of the SIM card was reduced.

How instead of the usual get a nano-sim card?

Replacing the SIM card in cellular company

Replacing the standard SIM card on nano-sim required when buying a new gadget.

If the smartphone is purchased in the store, right there you can replace the sim card.

In the presence of a passport in the office of any cellular operator You will replace within a few minutes. Only sim card must be framed in your name. Phone number, tariff plan and all connected services will be saved.

But what to do if this method does not suit you? Then the only output is trimming the SIM card under Nano-Sim.

How to make nano-sim from the SIM card?

Then you have to rely on your own head and hands and decide how to crop sims under Nano Sim yourself. It is not difficult to do this at the next step-by-step instruction:

Cut with sharp scissors from about 0.5 mm from the contact site with a smooth end of SIM card.
From the smooth side of the SIM card gently cut off about 2 mm.
Cut the corner on the contact site. It is necessary to make it from the same side where the cut corner was originally.
Nano-sim thinner by 15%. From the back of the excess plastic we remove the sandpaper.
Checking the performance, if not included - we are refined with a file.

How to make nano-sim micro-sim?

There is a question how to cut micro-sim under nano-sim? New chips in size coincide with Nano-Sim. We will only need a file to remove excess plastics. If you are not lucky with the new chip, the procedure is as follows:

Cut from each side of the contact site at 1-1.5 mm. If it does not enter, you will have to neatly modify the file. Do not forget to crop corner.
The nail gently peel plastic from the contact site.
Checking performance.

it the simplest wayHow to cut a micro sim card under nano-sim. The main thing is to act carefully.

Alternative SIM Card Trimming

Let us consider further a few more ways to trim the SIM card with their own hands:

circumcision simes using a template;
pruning sims using a cutter.

This is an even easier way to trim the sim card under nano-sim. The procedure should be:

Template number 1.

Template number 2.

Download and print a template.
Gently glue the template on the contact part. The template center must coincide with the center of the contact platform.
A sharp scissors or metal scalpel gently cut a plastic under the size of the template.
We are refining a manicure filling.

If you downloaded the second pattern, print it on A4. Follow the lines as shown on the template and cut out.

Slim Card Trimming With Cutter

How to trim nano-symart? The procedure for action is almost similar to the cutting method with scissors:

Using the cutter, we cut about 0.5 mm from the contact site with an even end.
From the smooth lateral part gently cut off about 2 mm.
On the opposite side also cut off 1.5-2 mm.
Scissors gently cut off the corner on the contact site. It is necessary to make it from the same side where the cut corner was originally.
Cut 1.5-2 mm from the last uncut edge.
From the back of the excess plastic we remove the manicure filling.
Edge curves process with a file.
Checking performance.

When trimming, do not damage contacts. Otherwise, SIM cards can be thrown out.

If you doubt your abilities, contact any salon of telecom operators. For 300-350 rubles, you willingly provide you with a similar service.

Adapters for nano-, micro-, SIM card

How to get micro- and nano Sim.We looked higher. Now we will deal with the inverse problem. For this purpose, there are special adapters. The adapter is just a frame of the desired size.

There are so-called transformers on sale. This is a single-size SIM card from which you can easily break micro or nano-sim. Gently disassemble such a transformer, we get the simplest adapters of the size we need.

In the future, if we need a size larger, simply insert the nano-sim in the frame is needed.

The adapter of the desired size can be easily purchased at any store. Cost - 50-250 rubles.

conclusions

Based on the above information, the following conclusions can be drawn:

Exchange your SIM card on Nano-Sim can be in any salon telecom operators. You need to have a passport, and the SIM card must be framed in your name. Phone number and media information will be saved.
From a regular SIM card, you can make both micro-sim and nano-sim cards within a few minutes. Three ways, how to cut a sim card under Nano, we looked at higher.
To get a SIM card or micro-sim from nano-sim, you need to use a special adapter.

Crop the SIM card under nano-sim is not at all difficult

If you are not confident, and the SIM card is valuable for you, use a similar service at any store. The cost is not high and the risk is minimal.

Remember: Cutting a SIM card, you will receive a sim card that will work in new gadgets. The electronic filling will remain old. This means that you will have a new gadget with old sim card, albeit suitable in size.

The advantages that we have considered above will not have.

Video: Making Nano SIM card of Micro Sim.

Modern cell phones And smartphones are becoming more productive every day and more powerful, while they are put forward in terms of compactness and ease of use. To reduce the size and weight of devices and preservation, as well as improved productivity parameters, developers have to sacrifice the parameters of secondary components. Often this effect It is achieved by reducing the slot under the SIM card. In turn, this was the emergence of a new micro-sim format. Such an innovation forced many users to face the difficulties of optimizing standard SIMs under the new parameters of cellular devices.

Get micro-sim you can help service centers Mobile operator. This action can be made in almost every mobile communication salon. With the help of a special device, the cabin workers will customize the usual card under the desired size.

Make from the standard SIM card type Micro can both at home, using tools that are available in each home. This operation will take about 20 minutes of time and will require you some attentiveness and accuracy. To get a map of the required size, you need a pencil, ruler, scissors, as well as a small piece of sandpaper.

Pruning sims do it yourself

The size of the standard SIM card is 2x15 mm. Micro size is 15x12 mm. The thickness of the card is standard and is 0.76 mm. It will only be possible to reduce the length and width. Standard SIM card consists of two parts. The electronic chip contains all information about phone book, Call log, as well as an SMS message archive. The plastic part of the card is greater than the chip and it is this external size that coincides with the dimensions of the slot of the mobile device. Often the size of the chips of the standard SIM card and the micro format coincide, and the difference only consists in the dimensions of plastic casing.

First of all, it is necessary to place a pencil line of the upcoming cut. To do this, around the perimeter of the chip must be applied for a line of 15x12 mm in size. There are also situations where the chip size is slightly increased. In such a situation, the cut line will be held on foil. With the help of sharp scissors and accuracy, this manipulation will satisfy you. Instead of a ruler, you can also use ready template, around which you just need to apply a pencil line. The template can be made independently.
The second stage implies a careful trimming of the extra parts of the plastic on the lines that you have planned. For this manipulation, manicure scissors are perfectly suitable, as they are pretty sharp and powerful, despite their size. You also need to trim the corner from the resulting micro sim card, in order to give it the exact shape of the slot.
After trimming, you need to attach a card to the phone slot. If it is not sufficiently adjacent or burrs remained on the sides, then you should use sandpaper and carefully clean the cuts. Such manipulation will allow you to remove all the roughness that remained after trimming.