Where in the Word to make a frame. Creating various frames in photoshop

Formatting text in the document Microsoft Word. May require the installation of the framework. This element is used for framing both paragraphs and pages. At the same time, the possibilities of Microsoft Word version 2016 allow you to perform boundaries on all paragraphs and sheets of the document or only on specified objects. Find out which menu blocks you need to use to insert the frame in the Word, remove it or install only on certain elements of the text.

Stopping framing on the paragraph in the text

To set the frame on a specific part of the text, you need to pre-highlight it with the cursor. Then:
Confirm changes. To remove the list of paragraph, you need to do the same actions, only in the block "Type" select the icon with the word "no".

If in the same menu with the selected text area in the " Apply K."Set the text, the edging will be put on all lines of paragraphs.

After executing the operation, the set parameters will be duplicated on each new paragraph.

Framework for one or more sheets in the document

To install the frame to the whole page, the Object Cursor does not need to do. You should enter the same section of the menu, but only select the "Page" tab. Do similar to the action described above. After clicking "OK", the contour will appear along the boundary of the leaf fields.

The procedures described above should be done. Difficulties may occur when it is necessary to establish edging, for example, only on a title page or area in the middle of the document. That's what you need to do to insert the frame to the Word only on the first sheet:

The "Apply to" menu contains other functions. The frame can be used on the entire document, only on the first or other page, as well as on one of the sections of the document.

Applying the frame "To this section" is possible only when partitioning sections. They are used in cases where you need to create different formatting for different pieces of text in one document. Install sections are easy. Need to enter the block " Page layout", Select" Parameters " Raunt"And by clicking on the arrow, install the desired one. At the time of the rupture setting, the cursor is set directly at the place of transit of text formatting.

To cancel the installed framing in the document, use the same menu, only in the block " A type»You need to make an active icon" Not" Using the framework is convenient when specifying accents in the text. The main thing is to remember that the edging can be your color, thickness and design.

All these parameters are selected individually in the central menu block " A type" And in order not to be mistaken and not to perform the procedure several times, you should pay attention to the sample on the right. If a appearance Frames fit, press " OK" Otherwise, continue to make changes.

To make your document look great and gently, we recommend adding a frame to it. Frames will allow you to highlight your text particularly carefully, and the contents of the document will be picturesque, stylish and brightly framed. In this article we will tell about how to work with the framework in Word, how to add them and remove.

Frames - an elegant way to decorate your text, make it more readable and responding. In addition, therefore, you can give your document a bit of charm, because with the framework even the most "dry" content will be beneficial and more noticeable.

How to add a frame in Word 2003?

In older versions Word.To add a frame, you will have to close a bit from the menu. So, open the desired document, in the top menu find the "Format" tab and select the menu item "Borders and Pouring".

In the form that opens, open the "Page" tab, where we mark the width, line type and frame. In addition to this, you should specify which part of the document we use the frame. Confirm the specified settings by clicking the "OK" button.

That's all, the frame is ready. As you can see, nothing complicated and extraordinary. Nevertheless, as a result, you will get a spectacular customized frame.

How to add a frame in Word 2007, 2010?

In later versions of textual editor Word. The algorithm for adding the frame is very similar, and even became more intuitive. The only difference is that now instead of the top menu you have to turn to the tape, and so everything works absolutely identical.

Open text editor, deploy in it the document you need. On the tape we find the tab "Page Markup" and in the section "Page Box" we appeal to the "Border Border" element.

As a result of such simple and simple manipulations, you opens the form "Borders and Pouring". We open it tab "Page". Here you specify the color of the frame, its width and type. Immediately determine which part this document You should apply the frame.

After that, everything is ready, the frame is added and bangs on the fields.

In Word 2010, the procedure is absolutely similar, so we will not stop in detail on this.

How to add a frame in Word 2013, 2016?

In the next version of Word, the process of adding the frame has undergone some changes. If earlier the menu item you need could be found on the tape in the "Page Markup" section, now you can contact the appropriate functionality in the "Design" category. Here in the section "Pages" section, open the section "Borders of pages", and, as in any other versions of Word, set all the necessary parameters to add a frame.

Good day, dear readers Site!

It's time when the ability to work as a package Microsoft Office. And in particular, Word has become the same need to read and write. Consider one of the many questions to work with this wonderful program and learn how to make a frame in Word, which will make the text more beautiful.

In this article we will work in Microsoft Office 2013.

How to make a beautiful frame in the Word

First of all, we will open a document Word 2013 with the text in which you need to make appropriate changes. Go to the tab Design.

After that, in the upper right corner, click on the pictogram Borders of pages. Window opens Borders and Pouring. Here there is a bunch of all settings, first we will do everything simple - learn to make a frame to the entire page of the page.

Select type Frame, then set to apply to the entire document (if we want to apply to all of the document) and click OK.

Now let's start to pervert and make a more beautiful option (especially since there is a lot of settings - choose to taste and color).

Now we will improve. Let's make a colored paragraph stroke. All make in the same way: open the document, go to the bookmark Design. Put cursor, on that paragraph that we want to issue. In the window that opens, go to the tab The border.

Pay attention to the lower right angle, where it is shown that all changes will be applied to paragraph. On this tab you can choose.

• no - no frame will not;
• frame;
• shadow;
• volume;
• other.

Please note that all changes are immediately visible on the scheme on the right. Choose Frame. Select a type (click on the appropriate icon)

Choose color. To do this in the section Color, Press on a small triangle. In the click menu that opens, click and choose the color you need (for example, red).

In chapter Width Select size in points. To do this in the section Widthclick the mouse on the relevant item. We look at the changes on the right. If everything is satisfied with us, then press the button OK.

That's all where the cursor was there, there was a beautiful paragraph stroke.

What is needed in order to do all this not to one paragraph, but to several? To do this, we allocate the text we need.

Again on the tab Design Press the icon Borders of pages.Go to the tab The border And click Type Frame.

Select the color and width and press the button. ABOUTTO.

All these actions can be viewed on video.

In this article we will tell how to make a frame in the Word. To do this you need the Russian version microsoft programs Word. Nowadays such a thing is not a problem. You can easily download a program from the Internet.

Anyone may need to make a frame in Word "e. If you study at school or university, you have to do this action especially often. Nevertheless, it is done very quickly and simple. You can make a frame as one single page, so And on the whole text entirely. Take our step by step instructions And in the future you can do everything yourself.

How to make a frame in Microsoft Word 2003

1. We open the document (you can clean, but you can already with some text), we are looking for the "Format" menu, then "borders and fill". If the last line is not, then click on the arrow to open the entire list of entire list.
2. In the window that opens, select the "Page" tab. Here we choose the desired pattern / drawing, the type of frame.
3. If you want to set detail the indents from the edge of the page, then enter "Parameters" in the same window.
4. Boldly Click "OK".

How to make a frame in Microsoft Word 2007, 2010

1. We find in the top menu tab "Page Markup". In the tab We are looking for the "Border of the page" and click on it.
2. The window opens with the name "Border and Pouring". Choose the type of frame, we specify its appearance and color.
3. We can make a frame in the Word, both for one page and on the whole document as a whole. For this, the "Apply to: ..." function is provided here.
4. Click "OK".

After the actions done, the frame will immediately appear. As you can see, nothing complicated. Now you know how to make a frame in the Word.

Frame in photoshop can give effectitude of the photo. It allows you to focus on the image, gives it completeness. Also, sometimes the frameworks are used when designing sites. In general, regardless of the goal, for those who are just starting to master this graphic editor, knowledge, how to make a frame in Photoshop will be very useful.

Using the stroke

Open a photo in the program. The background will be blocked (next to the image is drawn). To unlock You can double-on the icon. After that, he must aby.

We highlight a photo Selection — Everything (Ctrl + A). Then we find: Editing — .

A menu will open in which you can set the dimensions, opacity, location and color.

If installed location OutsideYou need to change the size of the image taking into account the stroke thickness, otherwise the work will not be visible. To do this, go to the top panel Picture - and increase the width and height.

After selecting the parameters of the clamp " OK", Frame in Photoshop is ready. In this way, you can use any color, including make a white frame in Photoshop.

Overlay parameters

Create a new layer and appline the desired drawing on it, for example, gradient. Choosing it in toolbars.

In the same place, choose two likers of colors. I will have it blue and green.

We carry out the photograph with the left mouse button. A gradient appears.

We choose one of the allocation tools and we highlight the areawhere there will be a photo.

On the keyboard press the key Delete..

- Ctrl + d. We use the overlay parameters. To do this, right-click on the layer and choose " Overlay parameters».

Let's try to change different parameters To get the desired result.

Rounded corners inside

First method

Rounded edges can be obtained by the previous way if you use the "" tool.

Second way

To draw a frame, use the "" tool. Make an internal area of \u200b\u200brectangle. Stretch to the desired size with free transformation Ctrl + T.

Creating uneven edges

Open photo B. graphic editor. Unlock the layer, create a new and add a quick mask (Q). To do this, click on the toolbar on the mask icon.

On the toolbar choose a brush And sketch the area where we want to make a mask. It will become red.

Press on again fast mask iconor Q. Our area will be shown by a dotted line. Her flooded color or gradient.

Step mask

To begin with, use the allocation tool " rectangular region"And draw the first part of the frame. Invert Using the Ctrl + Shift + i keys.

Let's go to (q).

Apply in the top panel filter — registration — fragment As long as the result does not suit us.

We leave from the fast mask mode using the Q key and invert: Selection — Inversion (or SHIFT + CTRL + I). Now you can pour the selected area by any color or gradient.

We highlight the image: Selection — Everything or Ctrl + a.

In the top panel go Selection – Modification — Squeeze. We choose what will be an indent in pixels and put a tick.

Just as in the first case, choose in the top panel Editing -. We specify the desired width and color.

CTRL + D keys and our work is completed. It remains to maintain the result.

Round or Oval Frame

To make a round frame around open a photo and using the allocation tool "" allocate the desired area, invert (SHIFT + Ctrl + i) and the Delete key remove superior. Again we do inversionThe highlighted will be our circle.

Transform Its into the working circuit. Click on the image right mouse button - education working contour. On the toolbar choose a brush And we will configure it at your request.

Create a new layer, on it and we will draw. Go to the contours and making stroke.

Photo frame is ready. If you wish, you can make some more different strokes. So there was our result:

Blurred edges

Open the image I. we make three copies hot keys Ctrl + J or dragging to the icon create a new layer». Turn off visibility Two upper layers (click on the eye icon so that it disappears).

Activate the second bottom copy and turn on the top panel Filter — Blur — Gaussian blur.

Slider adjustable degree of blur.

Two clicks by the same layer we call styles of layers And click on "".

Make all layers visible And with a pinned button alt, press between the first two layers. Here, it should be:

Reduce size second image image function free transform. On him we put the stroke, gradient and inner shadow. We had about the following values:

Reduce top image. We get a blurred frame.

You can also familiarize yourself with the video.

How to insert a photo into the frame

On the Internet you can find a lot of resources with beautiful photo frames in pNG format. We'll figure it out how to insert a photo into the frame downloaded from the Internet.