Instructions for musical clock alarm with a starry sky projector. Instruction Watch Alarm Projector Star Sky XB1038 Alarm UI 1038 Sound does not work

Calendar until 2099 displays time, date and week

The thermometer shows the temperature in two Celsius modes and Fahrenheit.

Switching 12 and 24-hour modes. Alarm sounds of nature. Repeat function

Music loss function with stars projection

Timer function (00: 00: 00-23: 59: 59)

The dynamic projection of the color starry sky is accompanied by music.

When you enable, the initial settings of January 1, 2010 and the time in 12 TI appear. Watch format.

Time setting and dates:

1. In time mode, press the ZET key to access the time setting and the clock will flash. Press the up or down key to adjust the time then click

automatically after 2 minutes. When the alarm clock calls, press any key to turn off the signal. When the repetition function is turned on, the chords / sounds of nature will start playing achieving the specified repeat interval, and it automatically stops per minute. In the repeat state of the signal or repeat, click Install to stop the replay signal.

Timer mode:

1. In time mode, press the MODE key twice to access the countdown mode, and the default time display 23:59:59.

2. In the clock mode, press the SET key and the hour will flash. Press the up or down key to adjust the time up or down, and press the ZET key and repeatedly the UP or DOWN key, select minutes and seconds, in turn, and finally press the ZUET key to confirm.

3. At the end of the above installations, press the up key to start the countdown, and the number of seconds the set is currently starting to decrease.

4. Creating goals: 0-23 per hour. 0-59 for the first and from 0 to 59 minutes for the second.

5. To the setup state, press the MODE key to return to the time mode.

Temperature mode:

Displays the current ambient temperature. In time display mode, press the ZUT key to switch between Celsius. Temperature and temperature

Fahrenheit.

the zet key and repeatedly the UP or DOWN key. Also install minutes, year. Month and before returning to normal time display (week, day can change automatically, respectively, while the date is set).

2. To exit the setup mode, press the MODE key twice or do not press any keys for 1 minute.

Switching between the 12-hour and 24-hour modes:

1. In time mode, press the up key to switch between the 12-hour and 24-hour modes.

Functions of alarm and timer:

1. In normal mode, press the MODE key to access the alarm function with the alarm output to keep the key pressed to turn on the signal and repeat function, click again. To disable the functions. Signs are displayed (((.))) -Bidnock and ZZ - Dund. In normal mode, the absence on the screen signs the alarm clock and the timer suggest that the alarm clock and timer are disabled. If the alarm clock is configured and replay alarm, then the signs are simultaneously specified on the screen.

2. In the repeat mode mode. Press the ZET key and the alarm time starts flashing. Press the up or down key to adjust up or down, and then press the ZET key. And the key up or down to configure minutes, the repeat interval and select Music as a repeat alarm (1-4 are the sounds of nature and 6-10 are chords). After setting up, press the MODE button twice to return to the "Time" mode.

3. When the alarm clock reaches the specified time, colored lamps, already for 8 for the second line, and then chords / sounds of nature begins to play, and display color images of the starry sky with a change in musical rhythm, and it stops

Normal measurement range: 0-50c. (32-122F). In case of exceeding the range

measurements. Lo is displayed below 0 degrees and Hi will be displayed in the string when the temperature exceeds 50 degrees, indicating the limits of the measurement range.

Function Listening to music:

In any condition, press the time key to set the time to listen to music and the initial moment of 10 minutes. Click again. To choose 20/30740/50/60 minutes.

During listening to music, press the up key to select the previous song, and press the "Down" key to select the following song. 10 songs for choice (1-3 are natural sounds, 4-cyclic previous 3 natural sounds, 5-9 are chords and 10-cyclic 5-9 chords).

Power and replacement of batteries:

3 AAA 1.5V batteries are used to power this product. In case the product

used for long term, the display / light is weak, the sound is missing, it shows that it lacks electricity, and it must be replaced. Remove the battery panel, mounting 3 pieces of a new AAA sizes. 1.5 In the battery correctly, and close the battery cover.

Fully user alarm clock user manual Read

Clock - Music Projector Star Sky UHAI UI-1038 Operation Manual General Description of Functions  Time (12-hour or 24-hour time display mode)  Calendar (from 2000 to 2099 - Date and week number)  Alarm clock with a selection Melodies  Time reference function (timer) from 00:00:00 to 23:59:59  Thermometer with the possibility of selecting the temperature map of Celsius or Fahrenheit (00 C - 500 C and 320 F - 1220 F)  Musical mode with function Setting the time interval to play melodies  Nature sounds  Dynamic starry sky projection accompanied by melodies or nature sounds  Backlight Time function: When the device is initially turned on, the time is displayed 12:00 in the 12-hour time system and date January 1, 2010, the temperature in degrees is displayed. Celsius, the alarm and repeat functions are disabled. Setting time, dates, month and year 1. In the time mode, press the SET button to access the time setting, the hour read is flashing. Click the UP or DOWN button to adjust the time, press the SET button again to set the minutes, year, month, date before returning to the usual time reading (the day of the week may vary automatically, while the date must be installed) 2. To exit the setup mode, press the MODE button once or do not press other buttons for 1 minute. Switching between 12-hour and 24-hour modes in time mode Press the UP button to switch between 12-hour and 24-hour modes. Functions of the alarm and repeat 1. In the time display mode, press the MODE button to go to the alarm call setting function (Alarm is displayed on the display). Press the DOWN button to turn on the alarm and repeat and repeat functions, press it again to disable the functions and then icons with images (((.))) To call the alarm and zz for repeat. IN as usual mode Time alarm and repeat icons are not displayed, it means that the alarm clock and repeat are disabled. In the event that the icons of the alarm and repeat were not included, the alarm clock does not proceed in set time . Meanwhile, unless the alarm is turned on, the repeat function will not be available. If this feature is needed, you must include the alarm and repeat icons at the same time. 2. In the alarm mode, press the SET button, and the value of the an alarm clock will flash the time. Click up or DOWN to adjust more or less, press the SET button, the UP or DOWN button to set the minutes, the repeat interval, to select the alarm ringing ringtones (the first is the sound of the sea wave, the second is the sound of the murmur and the third - light slum winds, The fourth is the repetition of the first three sounds, with the fifth according to the ninth - world classical music and the latter - repeat with the fifth along the ninth). After installation, press MODE twice to return to the time display mode. 3. When the alarm clocks in a settling time, the projector will turn on, for 8 seconds, the sounds of nature will start playing, after 2 minutes everything will turn off automatically. To turn off the alarm, press any button. If the repeat function is enabled, the alarm clock turns on again according to the set interval that will automatically turn off after a minute. To turn off the alarm, when the repeat is turned on, you need to press the SET button twice. Timer: 1. In time display mode, press the MODE button twice to access the timer. By default, the timer time displays the time of response 23:59:59 (CC: mm: ss). 2. In the temporary mode, press the SET button, and the hour read is flashing. Press the UP or DOWN button to adjust the time or backward or back, press the SET button again and the UP or DOWN button to install alternate minutes and seconds, and finally press the SET button to secure the installation. 3. Once when the above settings are completed, press the UP button to activate the timer, the countdown will begin. When time readings are reached 00:00:00, the beep will work for 1 minute. When counting the time, click the UP button to pause to continue the countdown again press the UP button. 4. Existing limits for the timer installation: 23:59:59. 5. Being in the installation mode, press the MODE button to return to the time mode (the timer will remain on). Temperature: The ambient temperature is displayed in time mode in the upper right corner of the display. In time display mode, press the DOWN button to switch between the point of Celsius or Fahrenheit. The temperature range of temperature: 00 C - 500 C (00 C - 500 C) In case of exceeding the existing temperature indication limit, LO appears (below zero) and Hi (above 500 c). Illumination function. The backlight turns on automatically by pressing any of the instrument buttons. Turning off the backlight also occurs automatically after 8 seconds after the last button is pressed. Time interval setting function for musical sound in any position Press the TIME button to set the time interval of the musical sound, the initial gap is 10 minutes. Click again to choose 20/30/40/50/60 minutes. Music mode In any mode, press SOUND to get into the music selection mode. Immediately after clicking, the sounds of nature will be played and the starry sky projector will turn on. The time interval of musical sound will correspond to the already installed. When the time expires, the sound and the projector will turn off automatically. Being in the music selection mode, click the UP button to select the previous melody or click the DOWN button to select the following. 10 Melodies to choose from. (The first is the sound of a sea wave, the second is the sound of the murmur of water and the third - light noise of the wind, the fourth is the repetition of the first three sounds, with the fifth according to the ninth - world classical music and the latter - repeat the fifth along the ninth). Power supply and replacement of batteries As a power source, 3 AAA batteries are used. If in case of long-term operation of the device, the light becomes weak, the sound is lost, all this suggests that there is not enough charge and it is necessary to replace the batteries. Remove the lid insert3 pcs. New AAA 1.5 V batteries according to polarity and close the lid.

Unusual, beautiful clock clock. Purchase is just great! He is recommended every way

How it is historically so it happened that the users of the site were unbelievable on this site bold, and pity - this is one of my favorite techniques when writing reviews \u003d (

Oh yeah, what am I talking about? The camera plans to return from the diagnosis from day to day (), well, I am ready to make reviews at least now.

What do we have in your hands? Clock. Alarm clock. Thermometer. Emitter of nature sounds and in general a very interesting thing that requires only the presence of 3 AAA batteries to maintain vital activity.


What for? Because I want. Because beautiful. Because they asked


What can? Alarm function, hours in two formats (12 and 24 hour), thermometer (in degrees Celsius and Fahrenheit), countdown function (maximum time - 24 hours) ...


... calendar, music ...


But the most important thing - you have not guessed?


- awesome beauty backlight. Moreover, the manufacturer declares that the backlight will also be regulated depending on the rhythm of the music that you will include.


On the front panel of this device there are 6 buttons to change the mode, and other tunes. Just if I forget to describe any of its functions - just in case, with the photo, an instruction to the aggregate is attached.


Left from top to bottom: Mode, Setup, Time


Right top down: sound, up, down


When I photographed the coming - for some reason, I forgot to pay attention to the packaging - but this photo seems to be quite significant. Packaging printed beautifully - you can safely give or sell. P.S notice - almost did not bathe! (Ho-ho)


Here briefly and that's it.
Price, Functionality, Beauty - Everything says PERthat is to buy this thing. In turn went to the legitimate owner, well, in the case of which I am ready to answer some of your questions based on this short experience with sim device \u003d)