Disable Windows 7 Computer. Computer shutdown timer for Windows: how to set time

There are many programs and gadgets of different functionality for this, but in this article I will show how can I turn off, restart and send a computer to sleep mode Using standard Windows tools.
This method was checked on Windows XP, Windows 7 and Windows 8.

To implement, we need a "job scheduler" (or tasks). IN different versions Windows It is located a bit different.

IN Windows XP. :

Start - Control Panel - Label "Assigned Tasks"

or

Start - All Programs - Standard - Service - Designed tasks

IN Windows 7. :

Start - Control Panel - Administration - Task Schedule

or

Start - All Programs - Standard - Utilities - Task Scheduler

IN Windows 8.it is enough to enter the "Task Schedule" on the initial screen and click on the tile in the results of the parameter search results.

Before you configure the planner, you need to see if its service is included. To do this, click wIN.+r. (Start -) and enter Services.msc.
In this window, we are looking for a "job scheduler" and look at its condition. It must be "running". If not, then click on it PKM and choose Run

Now proceed directly to setting up the task scheduler.

For Windows XP:

Run, click on "Add Task"

Will appear Master Planning Master in which we choose the desired task from the list, or we are looking for it through Overview...

Then spend any settings using the wizard. Nothing difficult.
At the end of all actions, you will need to enter the username and password.
The name can be found in the computer property, and if there is no password, then leave the field empty.

For Windows 7 and Windows 8:

Run the master by clicking on Create a simple task ...

indicate the name and description. Then choose the trigger. Otherwise, expressing - the frequency of running task

for this trigger, you can specify the date and time of the task

select action. In this case, choose "Run the program"

well, now the most interesting starts. In principle, you can specify both in and Windows XP by clicking on the button Overview.. When specifying the path to the executable program file. But I also want to draw your attention to the "Add Arguments" string. I will write about it below.

Then the window will appear with all the data entered, where everything needs to be checked again and agree by clicking Ready.

Now about how using this method can be turned on, turn off, reboot, etc. Computer over time.

For turning off the computer, meets a special service program that is on the system disk in the folder \\ Windows \\ System32 \\ and is called shutdown.exe (you can find it right now and run it. Just not surprise if the computer will display the message about the shutdown).
For sleep and hibernation mode corresponds to the rundll32.exe program, which is located there.

So here. You can either create a file to start these programs with the parameters you need, or register them in the scheduler.

That's just XP does not support arguments and parameters. Therefore, for it you need to create a file.

1 option - indicate the arguments for the program on shutdown, reboot, sleep and hibernation.

Turning off the computer

program:
argument: -r.

Hibernation mode

program:
argument: powrprof.dll, SetSuspendstate 0,1,0

Sleeping mode

program: C: \\ Windows \\ System32 \\ Rundll32.exe
argument: Powrprof.dll, SetSuspendstate

Showing the screen to "turn off the computer" on example Windows 7:

Here is a small list of arguments that can be used in Windows:

-? - Output help on use (either without key)

I - display of the graphical interface (when used, this key is put ahead of all);

L - exit from the system (incompatible with the -m key);

- Canceling Reload / Off;

M - Application of operation for remote computer With name;

T n - timer performing operation in n seconds;

C "Comment"- Comment to the operation (when used in the window will be displayed "Comment", in the command line it is necessary to conclude it in double quotes, the comment should not be longer than 127 characters);

F - Forced completion of applications without prior warning;

D [U] [p]: xx: yy - cause code;

u - user code;

p - scheduled completion;

xX - the main cause code (1-255);

yy - additional code Causes (1-65535).

2 options - create a file with shutdown arguments, reboot, sleep and hibernation.

Here everything is quite simple.
Create new document In notepad, we write to the command and argument (for example, I want to reboot with a timer in 16 seconds and that the system pre-warned me about closing applications), which will look like this:

Then save it (file - save as), in the "File Type" field, select "All Files". Name specify anyone, and should be bat.

Well, then - we need to refer to this file when you select the program in the scheduler (remember where you choose using the button Overview...).

By the way, with this scheduler, you can make a kind of an alarm clock - simply specifying the path to music as a file, and then specify the time of inclusion at 8 am, for example.

Of course, to turn on the computer, you need to not turn it off, but send it to sleep or hibernation, and then (for example for alarm clock) in the "Options" tab in its properties Enable the "Wake up computer to start this task" option - this is for Windows XP.

For Windows 7, you need to double-click on the "Conditions" tab on the "Conditions" tab to "prompt a computer to perform the task."

The timer is a very convenient feature that will allow you to more competently use your device, because then you can control the time spent at the computer. There are several ways to set the time through which the system will complete the work. You can do this using only system tools, and you can install additional software. Consider both options.

Many users need a timer to monitor the time, and not allow the computer to spend electricity to spend the computer. In this case, it is much more convenient to use additional software products, because the means of the system will not give you such a number of tools for working with time.

Method 1: Airytec Switch OFF

One of best programs This plan is the Airytec Switch OFF. With it, you can not only start a timer, but also configure the device turning off, after the end of all downloads, output from the account after a long lack of user and much more.

The program is very simple, because it has Russian localization. After launching the Airytec Switch off, it turns into a tray and does not prevent you from working at work at work. Find the program icon and click on it with the mouse - the context menu will open in which you can select the desired function.

Method 2: Wise Auto Shutdown

Wise Auto Shutdown is also a Russian-language program that will help you control the operation time of the device. With it, you can set the time through which the computer is turned off, will restart, go into sleep mode and much more. You can also even make a daily schedule for which the system will work.

Working with Wise Auto Shutdown is quite simple. When you run the program, in the menu on the left, you must select which action must perform the system, and on the right - specify the execution time of the selected action. You can also turn on the display of reminders 5 minutes before the computer is turned off.

Method 3: Use system tools

Also install the timer you can without using additional software, but using system applications: dialog box "Run" or "Command Line".

We looked at 3 ways with which you can set a timer on a computer. As we see, the use of Windows tools in this business is not best idea. Using additional software? You greatly facilitate your work. Of course, there are many other programs for working with time, but we have chosen the most popular and interesting.

You could get acquainted with several simple, and not very, programs for these purposes. Programs are good in that they do not require installation. Unpacked, launched, set up once and everything works. Yesterday, just as I turned off the computer. Usually in the evening, it seems and it is necessary to look at the Internet and it. Cases are not important and not urgent, but the time is decent on them. Because of this, we go to bed late, in the morning they do not get enough sleep and all day awry. That's what would fit perfectly well. But you can do without programs. Built-in tools operating system. Next or watch the video at the end of the article.

Task Scheduler - Excellent Means for Automation of Computer Shutdown

I admit honestly, rarely I use this utility. However, in this case, its use is an excellent solution for our task. Let's start the task scheduler. Open the Start Main menu and select the control panel. In Windows 8, select System and Security\u003e Administration. In the list that appears, select the task scheduler. In Windows 7, you can use the search in the Start menu.

The task scheduler window opens. Pay attention to the right side. Section actions. We choose to create a simple task ...

In the window that opens, in the name field, you must name the task being created. For example, shutdown. If you want to briefly ask a description of the task you created. Press the Next\u003e button

We specify the frequency of running the automatic shutdown of the computer. Put daily, discipline is all). Click Next\u003e

After you need to set the task execution time. I will put on earlier that every day get up with the right leg. Press further\u003e

We choose to start the program (that is, do not touch anything) and click Next\u003e

In the program field or script write "Shutdown". Add Arguments in the field: Write "/ s". Click Next\u003e

In the Completion section, click Finish

The task of automatic shutdown of the computer at a specified time is created. Now, in order to edit it, you need to start a new job scheduler and select the task scheduler library on the left side. In the middle at the top you will see the table in which you will find the task you created. If you need to delete a task, you select Delete in the right column

To edit the selected job, select Properties (Delete Functions above). Go to the Trigger tab, allocate the entry in the table and click Edit ...

Now you can schedule automatic shutdown of computer At any time without using third-party programs.

Automatic shutdown of the computer using the command line or the execute utility

If you need to perform a single shutdown of the computer, you can make this procedure even easier. Using the utility to perform. Open the Start menu in Windows 7 and select Run. How to make the Start button in Windows 8 you can find out. In Windows 8, the utility can be executed through the search, as in Windows 7

In the program window that opens, you will write the "Shutdown / S / T 600" command. Instead of 600 write opening time In seconds before turning off the computer. And click OK

At the same time, you will immediately see a warning that your session will be completed through your chosen time. Press the Close button

If you need to cancel the automatic shutdown from the computer, then call the Run utility again, enter the "Shutdown / A" command and click OK

In the notification area, see the message "Exit from the system canceled"

So you can plan a computer shutdown to necessary time. The inconvenience is one thing - you need to calculate the number of minutes before shutting down. If time can be calculated approximately, this is a great option for automatically completing the computer.

Conclusion

In this article you learned How to automatically turn off the computer Using the built-in Windows operating system. This, job scheduler and embedded utility. Before writing this article, I thought about the scheduler as something difficult and not necessary. Now you can easily schedule any task including automatic shutdown of computer. Also with the utility to perform. Previously used to call the command line.

There is another simple way automatic shutdown Computer. This is the use of gadgets. How to implement it in Windows 7 Watch the video below

Processing a computer of large amounts of data requires a time that an employed person is not excess. Some operations, such as: Rendering video, checking the system of antivirus, downloading files from the Internet is executed without user participation, but not all programs can offer a system shutdown function in automatic mode.

Many ordinary users are asked: how to automatically turn off the computer by analogy with the shutdown timer on household appliances ( washer, microwave, etc.)? Our article will consider the main use options. this regime Standard tools and using third-party software in Windows 7 and 10.

The ability to automatically turn off the computer was provided in advance in the earliest Windows OS. This method implies work with the main system interface - a command line. It is universal for any version of Windows and is the easiest to use.

To do this, perform the following steps:

1. Go to the menu "Start / Programs / Standard" and choose the program « Command line» Either enter the name in the search string.

1. In the console we enter the command "Shutdown". A certificate will appear on the screen indicating the parameters and the corresponding arguments.

For the usual shutdown of the computer, we use two arguments:

• "/ S" - completion of the PC;
• "/ T" - The countdown timer time until the task is executed (indicated in seconds).

1. For example, you need that the computer completes its work in half an hour. Without leaving the console, we prescribe the "Shutdown -S -t 1800" command and click "Enter".

Attention! The team must be without quotes.

Immediately after activating the auto discontinuity of the computer on the panel windows management There is an indication of the remaining time.

1. To cancel this action, enter through the command line « shutdown -a ".

There is a more simplified way to activate this mode without resorting to the input of characters in the console. To do this in the menu search bar "Start" We are prescribed "Shutdown -s -t (time in seconds)" and confirm the action key « ENTER ».

Disabling the auto power desk on Windows is made in the same way.

Using job scheduler

Task Scheduler is a standard Windows tool that can be useful if you plan to turn off the computer at a specific time and date. It is still used for interval (regularly repeated) actions. For example, you want your computer to disable yourself every day at 17:00 or rebooted every 12 hours.

As an example, we will show how to put a daily autotrunner of the computer at 17:00.

To take advantage of the scheduler, you need:

1. Go to "Start / Control Panel / Administration or "Programs / Standard / Service" and launch "Task Scheduler". Even easier - write this name in the search string in the "start".

In the window that opens, create a simple task by clicking on the same button.

1. A task creation wizard will appear, which consists of several stages. On the first you need to come up with a name. We will write "auto power off". After Zhmame "Further".

1. In the trigger item, you must specify the task launch interval. We choose "Daily".

There you need to specify the time and date of triggering the trigger.

1. On the menu "Act" The user specifies the process to occur after the trigger is turned on. We need a parameter "Run the program".

1. The name of the program - « shutdown ». In the field for arguments we write «- s -f " (Through the gap without quotes).

In the last window, we can double the conditions and parameters specified by us and click the button. "Ready".

Automatic shutdown of the computer will occur at a specified time independently of the operation being performed, loading or other conditions. This method is useful as a safety net (if a person forgot to turn off the PC in the workplace) or parental control (limit the time of staying children in front of the monitor).

Timer shutdown Anvidelabs

After standard means, Windows we turn to the review of the small and simplest in the management of the utility "Timer of shutdown" from the domestic developer AnvideLabs. It is characterized by its minimalism, practicality and unification with all Windows, including a seven and a dozen. In B. free access And in Russian.

To start using the program:

1. Enter the address of the developer's website http://anvidelabs.org/programms/toff in the browser bar and download the program.

1. In the window launched program The user can select an action starting from the usual PC shutdown before turning off the mouse, keyboard and even Internet connections. The following state is indicated below. At the bottom there is a timer to enter the exact start-up time. Immediately you can activate the countdown.

1. Like last time, we will configure the automatic shutdown of the computer at 17:00. We enter the time and press the green button. The countdown began.

When you press the cross in the upper right corner, the utility collapses in the tray and does not interfere with working.

Benefits

• Russian-language interface and minimalistic style.
• Several accessible actions.
• Completely free.
• The timer is blocked by password at the discretion of the administrator.
• Suitable for Win 7 and 10.

disadvantages

• It is impossible to schedule autotrunctivation by dates or install its interval.

Timer-alarm clock TimePC

The next program on the review is TimePC, developed by the site administration http://www.loadboard.ru. This solution It is advantageous from the previous one by the availability of the planner and the ability to not only turn off, but also include a PC at a specified time. The program to the limit is simple and functional at the same time. It can be called "golden middle" between multifunctional combines and miniature "plugs".

In order to acquire timePC program, do the following:

1. We go to the site http://www.loadboard.ru and find an article with its description and link to download. Swing and install software on PC.

1. TimePC signals the start of a sound greeting and immediately transfers us in the settings menu.

1. We are primarily interested in "Off / On PC". Here you can choose between the transition to the hibernation mode or output from it. Running trigger is set to time and date.

1. The built-in scheduler is the greatest interest. In it you can specify the action for every day of the week. It sadness that the interval cannot be installed here - it is either absent or infinite.

1. In the window "Running programs" It is possible to bind a specific action to turn on the computer. For example, you can add autorun programs or melodies as alarm clock.

Benefits

• Wide functionality.
• There is a planner action.
• You can translate the system to hibernation mode and output from it.
• Binding trigger launch of programs or files.
• Russian-speaking interface.
• Fully free software.

disadvantages

• IN system requirements Not specified Windows 10 (however, it works on it).
• The structure of the utility is decentralized - there is no single main window.

Switch off

The Multifunction program of the SWITCH OFF from AiryTec has a large number of settings and provides a lot of computer management options. This manager is excellent alternative standard means Windows. The program is free, has a convenient management and a clear description of the buttons.

To work with the program you need:

1. Download full version Distribution SWITCH OFF from the site http://www.airytec.com/ru/switch-off/get.aspx and install it on a PC.

1. The running program is folded in the tray. Managing a custom task is carried out by pressing the right mouse button on the program. The Schedule is responsible for the condition of the PC auto power desk and can be involved in any intervals (daily, weekly, once, etc.).

The action item allows you to select one of the available features. Of great interest is the parameter "Predefined commands"where you can specify any command and bind it to time or event.

1. The task management menu opens by pressing the right mouse button and contains the same commands, but already with pre-installed developers parameters.

The screenshot above shows which a variety of conditions is implemented in Switch OFF only for one task from the list.

Benefits

• Full freedom in the system management: Run any task at any time with any number of repetitions.
• The ability to shut down from the Internet.
• Very simple program structure.
• The interface is completely in Russian.
• There is a command editor.
• Free software.
• Support 32 and 64-bit systems.

disadvantages

• The interface is fully implemented as context menus Task panels, which is not very informative.
• Officially does not support Windows 10 (but it works).

How to use?

Today we told you about how to configure the automatic shutdown of the computer windows tools And using utilities downloaded on the Internet. This feature is relevant for everyone without exception in the office and at home. The only question is how to do it.

In our article, we have led many ways to implement the auto power desk PC. They are all good, but some may be more or less suitable for a particular person.

If the user has experience with windows system and knows how to configure it, then for it it will be preferable to control the auto-disconnection through the standard console CMD. and task scheduler. Plus such a solution in the absence of the need to download and establish third-party programs, as well as in the wide functionality of the Windows Planner.

For inexpressible and unpretentious people, we advise you to select "Timer off" and TimePC. A small functionality is compensated by the presence of a clear description and sufficiently convenient management.

All the rest who do not want to dig in the control panels, but needs to be accurately tuning the system, we recommend using Switch OFF. A large list of pre-installed tasks, a new task designer and command editor makes from this unpretentious professional manager utility.

Sometimes it happens that by the user after completing the work at the computer forgets to turn it off. Some are even leaving for quite a long time, while the computer remains in the on state. At that moment, when a person has such a situation, he has been taking place several times, he begins to think seriously about making the computer will turn off automatically. Many in search of a suitable program are starting to surf on the Internet, but no foreign software in this case will not need. All that you need is to create a script with which it will be an independent shutdown of the computer. Such a script can be created using the task scheduler embedded in all versions of Windows.

First step - launch job planning wizard

You need to open the task scheduler, for this in the menu you need to successively click on folders: "All programs" → "Standard" → "Service" and "assignment of a task".

On the window that appears after, you need to click on the "Add New Task" folder twice

To go to the next step in the job layer wizard window, click Next. Then you need to specify the program that the master will open, for this you need to press the review.

After, you need to enter the Windows folders then "System32", then you need to highlight the file "shutdown.exe". To continue to click on the "Open" button.

Second step - Setting task scheduler

You need to specify the name for the task, for example, "Shutdown", as well as when performing this task, let's say "daily". Then click "Next".

The task layout wizard will offer you to specify the time to automatically turn off the computer. Set the most suitable time for you, for example "1:00". Here you can also choose additional installations. If you choose on weekdays, it will not be turned off on weekends (Saturday, Resurrection). To complete, click on the Next button. The system will propose to specify the username and password, and will warn that "If you do not enter the password, the task may not start" - this step can be skipped by clicking the "Next" button, the password settings and the username we will set later.

You can check the correctness of the entered data and check the "Install additional parameters after clicking the Finish button".

Click the Finish button and close the error information by clicking on the OK button.

Third Step - Additional Parameters

A window will appear on your screen.

It needs to specify special parameters to execute the command. Consider two options:

1. C: \\\\ Windows \\ System32 \\ shudown.exe -s -f -t 0 - By specifying such data, the system will not warn about shutdown, it means that all unsaved documents will be deleted.

2. C: \\\\ Windows \\ System32 \\ shudown.exe -s - If you specify such data, before shutting down the system will surely offer to save all unsaved documents.

Fourth Step, Final

You need to put a tick near the option "Execute only when the login is performed", if this computer does not use any other than you (work is performed only under your accounting) (33 votes)