How to set channels on TV. Several ways to connect a VCR to a Jvc TV, how to set up channels

With the transition to digital television, many people have problems setting up digital channels on their TV. Many TVs do not support the DVB-T2 digital broadcast format, then you will have to purchase a DVB-T2 digital set-top box, since analogue television will soon be turned off.

How to find out if a JVC TV supports DVB-T2?

In order to determine whether the TV supports the JVC brand, look at the TV passport, it should indicate the presence of a DVB-T2 tuner and other characteristics.
If you do not have the documents saved, you can look up the information on the Internet by indicating the full model of the TV on the website See the figure. RF.
You can also call the TV manufacturer's hotline and ask them about the characteristics of your TV model.

Setting up channels.

In order to independently set up digital television on your JVC TV, connect the television cable coming from the antenna to the TV socket.

Take the remote control and press the MENU button.
Use the right button to go to the Channel section.
Next you need to select the Tuner Type Cable or Antenna.
To configure DVB-T2 digital terrestrial television, select Antenna. If you are connected to a cable operator and want to set up DVB-C cable television, select Cable.
Click on Autosearch.
Now you need to select the broadcast country Russia.
You need to select the search type when you want to install cable channels, it is better to choose Full.
Click on Start and wait for the setup to complete.

How to tune channels on an old TV.

To watch twenty free digital channels on an old TV, you will need a digital set-top box connected to an outdoor or indoor antenna.

To do this, purchase a set-top box and a cord for connecting to the TV, if they are not included.
Connect the tuner to the TV and turn on the AV mode or other mode through which you connected it to the TV.
We turn on automatic configuration on the set-top box and wait for the installation to complete.

Satellite television

New JVC TV models have a built-in satellite tuner for viewing satellite channels. To do this, connect it to the satellite dish and insert the module with the access card. Next, you need to start a search by selecting the tuner type Cable or DVB-S.

Often, user problems can be solved without calling a technician to your home. Organized for your convenience.

Our company produces JVC TV setup for all technical parameters of broadcast, cable and satellite television, adjusting the brightness, color and geometric parameters of the screen, adjusting the optimal sound, connecting the TV to the global Internet, connecting external playback and recording players.
We know how to tune channels on JVC TV.

JVC TV manual, jvc TV model LT-32M340 has the following control keys and connectors on the TV body:

On the front panel of the JVC LT-32M340 TV there are:
1) IR sensor of remote control system
2) Operating/standby indicator
3) Power switch (bottom) to turn off the power supply to the TV.

On the back of the JVC TV are:
4) Key to turn on the TV and switch to standby mode.
5) Vol key - decreases the volume level. In Menu mode, used to go to the previous item.
6) Vol + key - increase the volume level. In Menu mode, used to move to the next item.
7) CH key - - go to the previous channel. In Menu mode, used to move down.
8) CH + key - goes to the next channel. In Menu mode, used to move up.

9) MENU key - select the main menu
10) Signal source selection key
11) USB input - connect external USB devices, for example for watching videos or photos, listening to an audio player.
12) HDMI input - multimedia input for connecting high-definition image equipment.
13) Audio headphones - jack for connecting headphones.
14) Common Inteface CI - common interface, conditional access module socket
15) PC Audio connector - 3.5 mm input for connecting an external audio source from a computer.
16) VGA input - input for connecting a computer
17) RF input - antenna cable connector
18) Component input - connecting DVD players through connectors designated Y, B-Y, R-Y or Pb, Pr.
19) Composite video input and audio input.
20) Composite video output and audio output.
21) Wall bracket mounting holes.
22) Power cord for connecting to an electrical outlet.

Setting up your JVC TV

TV menus

All functions of the TV are controlled using remote control for JVC TV, through television menus of commands displayed on the screen. The main menu includes sections: CHANNELS, PICTURE, SOUND, TIME, SETTINGS, CONTROL. Menu sections are entered by moving the cursor using the “left” and “right” buttons on the remote control. The cursor is moved along the lines using the “up” and “down” buttons on the TV remote control. The selected row is highlighted in blue. Submenus are displayed next to the selected main menu item. Exit from the menu is done by pressing the “exit” key on the remote control. Color-muted modes are not used in this TV model, or are activated when certain external devices are connected or when another television broadcast mode is selected. When setting up the Mystery TV, hints are displayed at the bottom line of the screen. After a few seconds of inactivity, the menu automatically disappears from the screen.

Initial setup of JVC TV

The TV is controlled both from the control panel and the remote control. Initially, you need to select the menu language, television broadcast standard and country of residence using the remote control for your JVC TV. Next, you will be asked to automatically search for channels. To start it, you need to press OK on the remote control. In the on-screen menu that appears, the search and recording of television programs will begin in the modes of analogue broadcasting ATV, digital broadcasting DTV, searching for RADIO radio channels, or recording data if they are transmitted in the received signal. The channel search can be interrupted by pressing the MENU or EXIT buttons. The table indicates the number of programs found. The JVC TV stores 100 TV programs in analogue mode and 200 programs in digital TV mode. After completing the setup, you need to use the INPUT button to select the mode for viewing analogue or digital TV programs.

Creating a list of favorite programs on your JVC TV

The JVC TV has the ability to create a list of favorite TV channels that are watched most often from a large number of transmitted TV programs.
In the PROGRAM EDIT menu section, use the up and down cursor buttons to select the desired channel. When you press the FAV button, a heart symbol appears next to the name of the TV channel, and the channel itself is added to the favorites list. Pressing the FAV button again will remove it from this list. After creating a list, you can use the FAV button to quickly access your favorite programs.

Answers to questions on JVC TV

JVC TV does not respond to buttons

The JVC LT-32M545W TV turns on in the lower right corner with the word Android and ripples on the screen, the remote control does not respond and the buttons on the TV do not respond either, what should I do? 9.09.2018, Kemerovo.

If the LT-32M545W TV freezes, you need to unplug it from the electrical outlet, wait 1 minute and turn it on again. There is a possibility that the device will reboot and recover. If after rebooting it still does not respond to either the remote control or the buttons located on the TV body, you should contact a service center.

I need help setting up channels for my JVC TV.

I ask for help in setting up channels for a JVC TV, SUPRA set-top box, CAYMAN antenna. After a long vacation I turned it on: the TV only works with one channel RUSSIA 1. I didn’t experiment with the buttons because I'm afraid of losing this channel too.
It worked... I restarted the SUPRA set-top box, everything worked, but there is a "video1" icon at the top right, which cannot be removed, and there is a hum on all channels of the TV, although it shows purely without interference (moving the antenna from side to side does not help: the hum does not disappear) . 07/23/2018. Khabarovsk.

Switch the JVC TV to another channel, occasionally the broadcast fails at some frequency.
Check the antenna, the plug may have popped out.
Check the batteries in the remote control.

To configure the built-in DVB-C tuner to receive digital cable television programs, you must use the following parameters (selected in the TV menu):

Initial broadcast frequency - 298 MHz (298000 kHz);
A total of 16 transponders with a step of 8 mhz;
Symbol rate - 6875 Ksim/sec;
Modulation - 256 QAM.

These parameters are suitable for tuning based on the network search principle; if the TV does not support it, then you need to use a full search or select frequencies for manual tuning in megahertz: 298, 306, 314, 322, 330, 338, 346, 354, 362, 370, 378, 386, 394, 402, 410, 418.

Digital TV setup example

1. SAMSUNG TVs

Decoding of SAMSUNG TV models:

Country - Slovakia, Slovenia or Others;
Auto search for digital and analogue channels;
Source - Cable;
Search mode - Network.

General algorithms for setting up digital and analog channels for various models of SAMSUNG LCD TVs:

Click on enter the menu;
Select from the menu - “Channel” (icon “Satellite dish”);
Select - “Auto-tuning”;
Select - “Digital”, “Digital and Analog” or “Analog” (depending on the preferred television signal); Click - “Start”.

Detailed description of setting up digital channels on SAMSUNG brand TVs starting in 2010:

In order to set up digital TV channels for the vast majority of SAMSUNG models, press the “Menu” button on the remote control, the TV menu will open in which you will need to select the “Channel” section (Satellite dish icon).
Make sure that the Cable option is selected in the Channel-Antenna menu
To select a country, go to the “Channel-Country” menu item. The TV will ask for a pin code, if you have not changed it, then enter 0000
To have the necessary DTV search parameters, make sure that the following settings are selected in the “Channel-Country” menu: Country -> Digital channel: Other; Analog channel: Eastern Europe
Open the “Channel-Cable Search Options” menu: Start frequency: 298 MHz (298000 kHz); Ending frequency: 418 MHz (418000 kHz); Baud rate: 6875 KS/s; Modulation 256 QAM;
Open the “Channel-Auto-Tuning” menu: Signal source: “Cable”; Channel type: “Digital and analogue.”; You choose the type of channels at your discretion; you can find only digital channels, or digital and analog, or only analog. Click "Next"; Search mode: “Network”.
Click "Next". Once the channel search is complete, click OK. After an automatic search, all digital channels existing on the cable network will be found. Only those broadcasting in unencrypted form will be shown. It is most convenient to remove the remaining channels.

Removing channels:

Open the “Channels-Channel Manager” menu or press the “CH LIST” button on the remote control.
Select the desired channel (or several, using the “C” (yellow) button on the remote control), press the “TOOLS” button on the remote control and select “Delete”.
After confirmation, the selected channel will be deleted.

Channel sorting:

To sort the channels, select the one you need (in the “Channel - Channel Manager” menu, or press the “CH LIST” button on the remote control), press the “C” button, then the “TOOLS” button, the “Sorting” menu and move it to the desired position place in order.
If you have a SMART TV: Look at the “smart hub” button on the remote control, click and select the channel icon, then see the list of channels, select editing in the upper right corner.

2. LG TVs

General algorithms for setting up digital and analog channels for various models of LG LCD TVs:

Press the button - “Menu”;
Select from the menu - “Options”;
Select - “Auto-tuning”;
Select a country - " Finland"; (possibly France, Switzerland, Sweden)
Select the signal source - “Cable”;
Select - “Digital”;
Click - “Search”.

Setup takes approximately 5-10 minutes.

Detailed description of setting up digital channels on LG TVs:

In order to set up high-definition digital TV channels on the vast majority of LG models, press the “Menu” button on the remote control, you will see the TV menu in which you will need to select the “Options” section.
Specify the country "Russia".
Go to the “Settings” menu, “Auto search” item and specify the method of connecting to the TV “Cable”.
In the window that opens, go to “Settings” and enter the following parameters: Search type: “Quick”; Frequency: 298000 (kHz); Speed characters: 6875; Modulation: 256 QAM; Network ID: auto.
If you did everything correctly and saved all the changed parameters, then during the search your channels will be detected.
An important feature of LG TVs is “Automatic channel update” function. It must be disabled, otherwise the TV will periodically reset the channel list you have configured. To do this, go to “Digital cable settings - Channel auto update”: Off

Channel sorting:

To sort channels, select “Settings” -> “Auto search” -> “Cable” -> Uncheck (√) from “Auto numbering” -> “Run”. After setting up all channels, the necessary buttons will appear in the “Program Editor”.

3. SONY TVs

Since not all SONY models are equipped with a digital tuner for cable TV (DVB-C), you need to check the model of your SONY TV. Models equipped with a DVB-C tuner are marked KDL-**EX*** or KDL-**NX*** - for example KDL-2EX402R2, the first 3 letters in the model name (KDL) indicate that the TV is digital.” In models KLV-**BX***, etc. There are no DVB tuners.

General algorithms for setting up digital channels for various models of SONY LCD TVs:

Press the “MENU” button (for some models it is called “HOME” on the remote control (hereinafter referred to as the remote control). This button is usually blue;
Select the item “Settings”;
Find the “Digital Configuration” menu in the list of settings and enter it;
Select “Auto search for digital stations”;
A source selection window will open - select the TV connection type. Select "Cable";
In the scan type selection item, select the “Full Scan” mode.
Or by selecting the “Manual” item, enter: Frequency: 298 MHz (298000 kHz); Access code: "Auto"; Symbol rate: 6875.
Next, click “Start” and wait until the TV finishes searching for channels.

Pay attention to the bottom of your TV's OSD menu. The bottom menu bar displays hints on which remote control buttons to perform certain actions in the TV menu.

4. PHILIPS brand TVs

Press the “Home” button on the remote control
Select “Search for channels”
Select “Reinstall channels”
Select the country “Germany”
Select “DVB-C cable”
In the list of operators, select “Others”
Press right on the remote control and select “Settings”
Set frequency scanning to “Full”
Set the transfer speed to “Manual”
Set the transfer speed to “6875”
We will turn on analogue channels only if they are needed
Click “Done”, return to the previous menu
Let's start the search

Alternative option

To set up a PHILIPS brand TV, first read the stickers on the back of the TV, where separately for each tuner (DVB-T and DVB-C) there is a list of countries in which, according to PHILIPS, there is digital broadcasting (at the time of release of the TV, but If you update the firmware through their official website, then this list may change in subsequent firmware). If Russia is not in the list, then select Slovakia, Slovenia or Others.

General algorithms for setting up digital channels for various models of PHILIPS LCD TVs:

Click on the icon - “House”;
Select - “Install”;
Select “Search for channels”;
Select - “Reinstall channels”;
Select - Country - Russia or Others. If Russia is not in the list, then select - Slovakia, Slovenia or Others;
Select digital mode - “Cable (DVB-C)”;
In the “Network frequency” line, enter the frequency - 298 MHz (298000 kHz);
In the “Transmission speed” line, enter the speed - 6875 Ks/s;
In the line “Scanning frequencies” - 256 QAM.

Setup takes approximately 5-10 minutes.

Detailed description of setting up digital channels on PHILIPS brand TVs:

Press the "Menu" button on the remote control;
In the TV menu that opens, select the “Configuration” section;
Select the "Install" tab;
After clicking the "OK" button, you will move to the second menu field, then go to the "Channel Settings" tab;
After clicking the “OK” button, the third part of the menu will open, where you need to select “Automatic”. installations";
Next you will see a message about updating the channel list. Click "Start";
Select "Reinstall channels";
In the “Country” section, you must select Russia, but if this country is not in the proposed list, then select Slovakia, Slovenia or Others;
Since you are connecting to digital television via a DVB-C cable network, you must select “Cable”;
Before you start searching for channels, select “Settings” to manually correct the search parameters;
Set the baud rate to manual mode. In the tab, change the transmission speed manually from the control panel to the desired one. In some TV models, the flow rate is indicated in the “Character 1” tab; “Character 2” is left at 0;
Now set the network frequency to manual mode and enter from the control panel:
Frequency: 298.00;
Data transfer rate: 6875 ks/s;
QAM: 256.
After clicking the “finish” tab, you will again be taken to the channel launch menu, now you can start scanning.

If you did everything correctly and saved all the changed parameters, then during the search your channels will be detected.

5. TVs of the PANASONIC brand

Setting up digital channels on PANASONIC brand TVs:

Option 1

Press the “Menu” button;
Select the item “Settings”;
In the window that appears, select “Menu analogue. settings";
In the window that appears, select “Add TV signal”;
In the table that opens, put a tick in the “DVB-C” line;
Click “Start auto-tuning”;
After searching for all digital channels, going to the main menu in the “Settings” item, the line “DVB-C setup menu” appears. By selecting this item, you can adjust the setting manually (set the frequency to 298 MHz (298000 kHz) and speed to 6875 Ks/s).

The menu of your TV may differ from the model offered. In this case, you need to find tabs that are similar in meaning. If your TV asks for a search step, enter 8 MHz.

Option 2

Press the “Menu” button;
Select the item “Settings”;
Go to the subsection “DVB-C Settings”;
Select the “Auto Configuration” subsection;
In the “Auto Configuration” menu enter the following values: Frequency: 298 MHz; Symbol rate: 6875 Ksim/s; Note that there is no “modulation” parameter. Search mode: “All channels”; Scan mode: “Fast” (or “Full”); Network ID: "auto".
Click on “Start scanning automatically”.

Channel scanning lasts from 3 (“Fast”) to 10 minutes (“Full” scanning), after which the TV automatically displays a list of all channels configured by this tuner. The channel list will be displayed automatically, or it can be found in the DVB-C setup menu.

6. SHARP brand TVs

Setting up digital channels on SHARP brand TVs:

Models: 46 (52, 65) XS1, LE700. If your TV model provides for the reception of digital channels, but there is no “DTV MENU” item, then first select another country - Slovakia, Slovenia or Others.

Press the “DTV” button;
Press “DTV MENU”;
Select “Installation”;
Select “Auto installation”;
Click "OK".

Setup takes approximately 5-10 minutes.

7. DUNE HD brand media players

DUNE HD TV-102W-C can also act as a set-top box for watching digital television (cable (DVB-C) and Internet television (IPTV). Settings:

Go to the main menu by pressing the “TOP MENU” button on the remote control;
Select “Settings”
Select “Applications”
In the “Cable TV” or “DVB-C” section, enter the following values: Network scanning: No; Initial frequency, kHz: 298000; Final frequency, kHz: 418000; Interval: 8 MHz; Modulation: QAM 256; Symbol speed, kS/s: 6875
Confirm the scan by pressing the “OK” button
To view channels, go to the main menu by pressing the “TOP MENU” button on the remote control
Go to the “TV” section
Select “Cable TV” or “DVB-C”
To start watching TV, select any of the found channels