How to clean the computer mouse at home. How to clean the mouse from the computer? How to clean the housing outside

Each owner of a personal computer at least once thought about how to clean the mouse from dirt.

Indeed, because this device accumulates the most dust in itself, as there is a constant process of interaction with human palms, and after all, not every person washes his hands with soap before sitting at a computer.

If you do not make prevention in a timely manner, then several adverse consequences may occur:

Incorrect operation of equipment;
Defective functioning;
Breaking.

To avoid the complications above, you should always keep your workplace In full clean.

Care features of different types of mice

Today, you can allocate only six main types of equipment for transmitting information, for each of them certain conditions are required for processing.

Ball or mechanical mouse. It is extremely rare in the modern world, but there are still people who prefer exactly such a device. The main problem of cleaning is that the main layer of dirt accumulates exactly from one side of the ball and roller.

You can avoid this problem if you make a timely mouse cleaning, rug and periodically handle your hands with an alcohol-containing solution. But, unfortunately, in most cases, the equipment is still contaminated and the user comes to a difficult question, then how to clean the wheel in the mouse.

First of all, the device should be disassembled. After that, it is necessary to process it with a special scraper. Dirt remnants are recommended to be treated with a soft cloth impregnated with alcohol. It is not recommended to use special solutions, it can lead to a violation of its operation;

Optical mouse. The main part of the equipment is sensitive legs that are responsible for its full functioning. First of all, the mouse needs to turn over and process these components using cotton sticks with alcohol.

Laser mouse. Often, users are encountered with such a problem, how to clean the laser on the mouse. In fact, this is a fairly simple procedure consisting of several basic steps.

First of all, you should disassemble the device's body and remove the microcircuit from it. Next, you need to wipe the laser sensor with a cotton wand. Even with severe pollution, it is not recommended to use cutting items. Now, you need to wipe the remains of dust with a damp cloth and collect the design;

Trackball, as well as a gyroscopic mouse has a complex design, so it is possible to disassemble only an experienced specialist. The user can periodically wipe the surface of the device with an alcoholic solution.

Also necessary, at least once a year to give it to a complex processing programmer;

Induction mouse. In such a type of device, it is recommended to eliminate the manipulator. Further, the surface should be treated with a cotton stick, impregnated with alcohol-containing mortar.

In each of the above cases, it is worth remembering that it is impossible to allow the penetration of excessive fluid into the device, this may adversely affect its future functioning.

Means and Fixtures for Mouse Cleaning

In order to handle the device, you will need the following:

Rugs for storing individual particles of equipment;
Wands of various sizes for processing difficult holes;
Special fluids intended for cleaning computer devices;
Cleaning balls;
Wet napkins on an alcohol-containing basis;
Inexperienced users can additionally print the assembly scheme and disassembly of a certain type of mouse;
If you want to disassemble the device, you must first prepare a crusade;
Plastic scraper to remove strongly contaminated surfaces;
Soft fabric;
Soap solution;
Cotton wands, discs or tampons.

It is also worth noting that there are two main ways to clean the mouse: using its disassembly or in an unemmolated.

Each of these methods consists of several major stages%

How to clean the mouse without disassembling?

You need to turn off the device from the computer, remove the wire or mini sensor if the wireless mouse is cleaned;
Next, it is necessary to carefully treat a wet woven wand USB socket and a wire;
Now, it is necessary to process the mouse through the holes using a computer vacuum cleaner, it is important to carry out this procedure with minimal power, otherwise you can damage important parts of the device;
Then, all possible hard-to-reach holes must be cleared with special sticks;
The last phase of cleaning is rubbing the surface using the alcohol-containing napkin.

Before making this procedure, you should make sure that the process of disassembling the mouse is not possible.

Basically, this applies to those devices that have a complex structure. Such equipment is recommended to regularly give to the processing of an experienced specialist.

In the remainder cases, you should first disassemble the mouse, this will allow the most effectively eliminating unnecessary pollution from the device.

How to disassemble and clean the mouse?

If still disassembling the mouse is possible, then it should be cleared it for several basic steps:

You should pre-disable the device, disconnecting the cable or wireless sensor from the computer;
The wire and socket of the computer must be cleaned with a cotton stick, impregnated with alcohol-containing mortar;
Now, a special rug should be prepared on which equipment will be disassembled;
You should flip the mouse over your feet and unscrewed with a cross screwdriver the smallest, in-depth screw;
Gently need to divide the housing into two components;
From the housing you need to gently remove the chip, laser sensor or rubberized ball;
From the insides of the mouse should be removed all the dirt using a scraper;
The remaining dust must be removed with a soft tissue, impregnated with alcohol;
Then, each component of the device must be carefully dry;
The last stage of processing is a mouse assembly.

Such a cleaning method is most efficient, when it is implemented, it is important to do everything as careful as possible in order not to damage the important components of the device.

Precautions, what can not be done?

There are also several precautions that in no case cannot be done in the processing procedure. computer device:

You can not use an excessive amount of liquid. It should be cleaned only with a slightly wet cloth. Otherwise, a large number of an alcohol-containing solution can oxidize the components of the device, which will lead to a violation of its operation;
For the same reason, it is not recommended to use sharp objects that can damage the surface of some particles of equipment;
Be sure to turn off the device from the computer and start processing it after passing a few minutes;
It is best to use specially alcohol solutions for processing computer equipment. Ordinary alcohol can harm the inner parts of the mouse, leave a divorce and defectively remove contaminants;
It is not recommended to use matter with a pile, its particles can penetrate the device, after which its functionality can also be disturbed.

It should be pre-familiar with the reminder attached to the mouse in order to figure out how to process the device of a specific model.

For full operation of the mouse, it is necessary to make cleaning, at least three times a year;
It will also require cleaning the rug for the mouse and the working surface of the table;
Do not start working with dirty palms.

If you take a timely cleanliness of the cleanliness of the mouse, but also each component of the computer device, the system will always fully work, without delivering the user of unnecessary trouble.

Source: http://nisorinki.com/texnika/chistka/kak-pochistics-myshku.html

Laser Cleaning, Case, Wheel, Computer Mouse Sensor

Good day! Many people almost never change peripherals And they do not see any need.

On the one hand, this is good - the mouse is familiar, but on the other - you need to know how to clean it, how to clean the rug, how to clear the laser and how to disconnect it from the computer.

Otherwise, its response will be low, which will lead to numerous bugs and glitches, including in computer games.

Is it possible to make a computer mouse without disassembling

First of all, we would like to answer the question of which interests most: can they do something with the device without disassembling it? Of course, such an interest has a very understandable background: if an inexperienced person takes on the assembly-disassembly, he can just break the mouse. But, unfortunately, without disassembly, you will have to be satisfied only with external cleaning: the body, wheel, plummer dirt and several crumbs. For the internal device will have to be disassembled.

Therefore, if you want to get a clean, well-running, neat periphery, you will have to overcome your fears and take a disassembly.

If you do not want to risk and afraid to lose a faithful tailed friend, try to start to disassemble the old device that is lying in the closet.

How to Clean Computer Mouse from Fat and Mud Outside

Of course, one way to do without a bulkhead is - just wash the mouse with a special solution. Such a method will not save you from dirt on boards and will not improve the characteristics, but it will help to clean the body itself from sticky garbage and improve its slide for the surface.

You will need:

Alcohol or alcohol solution. You can also use chlorhexidine, it is more gentle.
Wool or cotton disk (replaced by special napkins for PC).
Toothpicks.

Disconnect the device from the computer so that you do not bother you. After that, moisten the cotton disk in the solution, gently wipe the housing itself and the wire of the manipulator. To achieve this, you can purchase specialized napkins. It is possible to resort to the usual wet, but in this case the mouse will unpleasantly smell.

After the external dirt is removed, take the toothpicks and carefully clean the slit under the legs, between the keys and the space on both sides of the wheel. Very carefully clean up the edges of the "peephole" - a red point at the bottom of the manipulator.

Try not to put pressure on the tool, to change the toothpicks in a timely manner. The most favorable option is one cleaning, one wand.

The algorithm below is universal for each type of mouse. You can safely use it in the case of ball, laser or optics, simply adding several nuances.

Take:

Alcohol or its solution.
Cotton pad.
Cotton wand.
Cross screwdriver of small size.

Disassemble the manipulator, remove the plastic case, carefully remove the chip from there, go through with a cotton wand. With the help of a cotton disk and alcohol, clean the inside of the housing. If necessary, get and wash the wheel (about how to do it is written below).

After that, with the help of a cotton stick, wipe all sensors. Special attention is paid to the place for the buttons - it is clogged most often. Then put all the spare parts in place, cover them with plastic and reiterate the device.

Very carefully collect the mouse back. Strong pressure on elements can damage the device!

How to clean the wireless mouse

If we are talking about a wireless manipulator, all fundamental principles of the process remain exactly the same as mentioned above. You need to be a bit more careful when disassembly, since devices of this type are often more fragile.

When cleaning - internal or external - pay special attention to the Bluetooth sensor. This will help if the mouse began to work badly, lose the connection, sometimes disappear from the visibility field or constantly require reduce the working distance.

How to clean the laser mouse from dirt

Laser lenses has its drawback: it is quite often contaminated. Since laser manipulators, in contrast to optical, require careful fit to the surface, so even small flax flashes on the eye can already affect the operation of the device.

So that this does not happen during each cleaning, carefully wipe the eyes with alcohol napkins or alcohol. But be careful, do not strongly press the fragile glass, otherwise you can accidentally break your mouse.

The same "bath procedures" must be carried out at least once in a couple of weeks.

How to clean the optical mouse

Cleaning the optical mouse is considered the simplest. It is not necessary to make serious manipulations for it, to pay for something special attention or act extremely gently.

As optics are considered a class of rather cheap and durable devices, it is randomly breaking it much more difficult. Cleaning such a mouse passes through the model algorithm specified above. It can be carried out every few months, in special cases - once every six months.

Features of cleaning gaming mice

From ordinary accessories for gamers are characterized by their sensitivity and a huge number of additional buttons, which in its own way affects the cleaning process.

She has the following nuances:

When cleaning the sensors, you need to be as cautious as possible, because the fragile, sensitive mechanism is very easy to break.
Its disassembly is more complicated, moreover, you will have to clean more details. Various programmable buttons, five or six additional keys - all this helps in the game, but creates problems in care.

How to clean the laser on the mouse

But not all situations allow you to use a standard algorithm. There are also problems that are solved only by a separate cleaning of any component.

The laser must be cleaned if the cursor periodically disappears from the desktop, and the lens ceases to glow red (most often) light. In this case, take the toothpick, turn the mouse, gently spend it along the edges of the lens, a little penetrating inside the case.

Try to touch both the "lamps" and the inner part of the housing, keeping the toothpick almost in parallel to him.

After the first cleaning, it is advisable to spend the second session by changing the tool.

The wheel needs your help if you feel some obstacles when using it, you feel how the wheel is stuck and unnaturally twitching. In order to correct this problem, you need to disassemble the entire mouse, remove this spare part from there.

Wipe the place for her so that there are no mud clusters there. The wheel can be omitted in warm water with alcohol, or wipe moistened in this rag.

If the mouse still works badly, it means it is time to carry it into repair.

How to clean the mouse sensor

The sensor must be washed, if all the sensors are burning, but the cursor on the screen does not move or moves with interruptions. To do this, take a cotton wand, moisten it in alcohol and wipe the lens at the bottom.

Try to remove all the puffed dirt, fat so that the laser shines is also bright, as and when buying a device. If nothing comes out, you need to disassemble the mouse and clean the lens, all the elements of the mouse from the inside.

What not to do when cleaning mice

So that everything went smoothly and without breakdowns, it suffices to follow the rules.

Namely:

Do not apply force.
Try to the microcircuits of water and dust.
Give spare parts to succeed before connecting them to the device.
Do not lose bolts, screws.
Do not clean the sharp needle or large and thick seer.

How to clean a computer mouse pad

Cleaning rug plays its role in the cleaning process. Even if your mouse is shiny and clean, the dirty and fearful rug will quickly pollute it.

Take some gentle detergent. It may be some kind of gel for washing furniture or windows, as well as various disinfectants. After that, with the help of a sponge for washing dishes, apply a means on the rug, thoroughly rinse it under running water.

Dry the hair dryer or hang on the rope next to the clothes. After 20-30 minutes, check if it is dry. If so, you can safely use.

How to clean the rag (fabric) mouse pad

Well, if you do not have a rug, but a whole carpet, covered with plastic, but a cloth, only any gentle body is suitable for you. It may be shampoo, shower gel or liquid hand soap.

The use of cleaning products in this case is able to easily "break" the rug, simply connecting its surface. In addition, the fabric is very easily absorbing a variety of pairs and poisonous evaporations, therefore such a solution can be at least dangerous to health.

Therefore, it is best to use precisely tools for personal hygiene. They are cleaned of dirt, do not harm in themselves.

In no case should not iron this species The rug, it is better to give him to dry yourself!

Features of the cleaning game rug for mouse

If we are talking about gaming mats, the task becomes even more difficult. All of them are made according to one principle: the maximum convenience for the player, the best slip on the surface. Therefore, their material is fairly fragile and sensitive.

It is necessary to very carefully choose the detergent, it is advisable to even take a liquid soap with the mark "not dried the skin." Otherwise, the coating can be very easy to damage, as a result of which the new rug will have to buy.

About cleaning rugs Razer for mice

A completely difficult task becomes at the reference of the Razer brand. These developers create the most convenient and anatomically faithful mats using various bulbs and concubuses. This is the main problem.

In the folds of the stand at arm, dirt constantly accumulates. To avoid this, it is necessary to constantly wipe it with a cotton wand or a toothpick, moistened in alcohol. Otherwise, all this dirt is poured on a clean, fresh rug.

What not to do when cleaning the mouse pad

It also has its important rules that must be observed. Of course, the rug is not a mouse. It is harder to spoil, and it costs it cheaper. But there is still such situations to avoid.

Follow these covenants:

Do not use aggressive detergents.
Do not squeeze the coating.
Before cleaning the rug, find out its type to take into account all the nuances.
Be pretty neat.
Do not scratch the coating.
Give it to dry well.

conclusions

If you have a timely cleaning periphery, there will be no problems with the device. Your mouse will always be like new: clean, brilliant and incredibly fast. If you did not do this for a long time, then be prepared for hard work.

Pros and cons

Pluses of timely cleaning:

Mouse will always work well.
It will last much more.
It will be rather responsive.
You can reach high response.
It looks much more careful.

Cons of timely cleaning:

Incorrect disassembly may damage the device.
Inexperienced user can then not collect it.

Modern personal Computer It is difficult to imagine without a funny "animal", nameable as a mouse. With it, there are many operations. But, as a rule, over time, it begins to malfunction in work due to contamination. Next, you will learn how to care for a computer mouse.
The mouse is better to pre-disconnect from the computer when the system unit is turned off (if you are sure to attach it back :)).
In case of contamination of the housing of the mouse, it can be wiped with a damp cloth using liquid soap for more successful removal of fatty sediments. In no case do not wash the mouse with an abundant amount of water or under the jet!
The problem of mechanical mice is that dust falls on the surface of the rollers and balls that are inside, which leads to the so-called "jerking of the cursor", or in general to fail to move in a certain direction. Therefore it is very important to use a mouse rug and always keep clean. If the mouse is still contaminated, then do not be afraid to disassemble it yourself and clean.
You need a small cross screwdriver. We unscrew the small screwdriver, located in a slight recess on the bottom of the mouse housing. The case, as a rule, consists of two halves, and maybe a plastic latch on the other side of the place where the screw is located. Gently disconnect the body into two halves without the use of rough strength, so as not to break the plastic latch, the case must be disconnected into two parts without much effort.
We proceed to cleaning. The rubber ball is best to wash with warm water with soap or just wipe with alcohol. Two perpendicularly located cylindrical wheels, as a rule, are rusked with mud in places of contact with the ball.
Carefully remove all the found dirt and dust. Special attention here is taking these dense mud rings on wheels. They, as a rule, can only be removed mechanically. To do this, you can use a small plastic or plastic scraper. Carefully scrape the wheels in those places where a dense dirt was nulipped. In no case to clean the inner cavity of the mouse should not be used solvents. It is also undesirable to use a knife or a razor blade, - there is a risk of getting bulk and scratches on the cylindrical surface of the wheels.
In the inner cavity of the mouse, in addition to two cylindrical rotating wheels, there is also a clamping wheel, which presses a rubber ball to the rug when working mouse. This wheel is also very important to carefully clean from dirt. This can be done in the same way as in the case of two cylindrical wheels.
Then it is necessary to remove the fat from the rotating parts impregnated in the alcohol with a soft not darous cloth. It is also desirable to wipe the inner surface of the mouse with alcohol, so that dust accumulated in the body.
It's time to collect the mouse. Carefully insert the latch into the grooves, ensuring that you do not take the wire, then tighten the screw. It remains to attach the mouse to the computer, turn it on and enjoy the obedient and smooth movement of the cursor on the screen.

Enjoy your work!

After some time, after purchasing and starting using a computer mouse, with regret, it is necessary to notice that dirt particles accumulate under the keys, because of which they begin to eat a little when it clicks. Sometimes problems concern and the mouse wheel - it suddenly begins to scroll, delivering a lot of inconvenience to the user.

What to do? Run to the store, spend money, buy a new mouse? No. It is most practical to first try to get rid of the problems that have arisen, the writing of the "insides" of the mouse.

To do this, you need to take the following steps.

Step 1. Turn over the mouse, unscrew the small quadro screwdriver screw at the bottom of the mouse. Carefully divide the upper and lower parts of the "rodent".

Step 2. At the bottom of the mouse, carefully remove the yellow fee, picing her for the bottom edge.

Step 3.. Pull out the scroll wheel, remove the accumulated fur and dust from it (in the photo of the cleaned wheel already).

Step 4.. On the top of the mouse, unscrew the two screws and carefully pull the mouse keys without failing with two springs.

Step 5.. Everything that may wipe with a damp cloth. Inaccessible places to clean up with a needle contamination. Wheel back back to his place, fee too. At the top of the mouse, first put the springs into specially made grooves, and then set the keys to its original position, secure everything with cogs. Connect the top and bottom of the mouse, taking into account the grooves. Spin the main screw.

Step 6.. So, what do we have at the exit? Finished clean mouse, working as if she is new! And no hike in the store! It took only patience and a few minutes of free time to clean computer mouse.

Will this article help you?

Sooner or later, before any user of the computer, the question arises about how to clean the mouse from the dirt.

A device for managing a computer (manipulator) is familiar to the mouse due to the external look like this animal. This device is always in direct contact with the user, and therefore requires periodic cleaning with a hygienic target. Many people do not think about it. And in vain. If the device is dirty, it is not only nonregienically, it will work much worse to work, forcing you to annoy on this. In addition, according to the results of research, the most dirtiest place on the table, where there is a computer is a mouse.

Before carrying out cleaning, you need to know what device you are dealing with.

Mice are:

optical (laser);
balls.

Currently, the overwhelming number of users apply laser devices. Balls gradually pass their positions, yielding more convenient mind.

When cleaning the computer and its parts, you can use special devices and tools sold in stores. These are various napkins, sticks, liquids, balls. Many of these devices allow you to clear the mouse without its parsing, but they cost quite expensive. Their use is advisable in cases where it is necessary to clean a large number of devices in the office, class, etc.

To use the means efficiently, it is necessary to strictly follow the instructions on the package. At home, you can do without such assistants.

Remember that cleaning the manipulator using conventional detergents is not recommended - it may be damaged. To purify the mouse, various solvents, knives, metal brushes cannot be used.

You can clean the mouse from dust without disassembled it.

To do this, do the following:

Disconnect the mouse from the computer. If the manipulator is connected to using USB.This can be skipped.
On the back of the mouse there is a special lens. Carefully clean the entire surface, the lens itself, the place around it with a cotton wand.
On the same side there are plastic convex legs. It is convenient to clear them from pollution with a wooden toothpick. After the completion of such a procedure, the mouse will move on the surface significantly better.
The toothpick is cleaned with all the hard-to-reach places and on the front side of the device.
Surface wipe with a napkin or a soft cloth. It can be slightly wet, but not wet in no case.

The use of any cleaning abrasive means is prohibited.

Clean the mouse from mud in this way it is necessary every month.

You can carefully monitor the workplace, wipe the keyboard and rug, but it does not save the mouse from getting into the mouse, so at least once every three months it is necessary to carry out more thorough cleaning of the device.

To do this, it is necessary to disassemble and clean as follows:

We remove the cross screwdriver with screwdriver (they are easy to see them on the reverse side of the device). Naturally, small details must be folded into a small container so that they are not lost.
Remove the mouse housing.
Remove all the details from dirt. No need to use sharp items when cleaning - they can damage the details of the manipulator. Cut the cleaning wand. If the wheel needs cleaning, make it a cotton disk.
Wipe all the surfaces and parts of a tampon treated with alcohol - it degreases the surface and will contribute to better cleansing. In addition, such a procedure will stop for a long time from the effects of dust.
Collect a manipulator. If you were pulled out to handle a microcircuit - put it in place. Close the lid, screw the screws.

Do not forget to wipe the computer mouse itself in the end with the alcohol and cord if it is available. Be sure to handle the mouse pad.

Both specified methods are applicable for any type of devices.

If such a procedure is performed periodically and neatly, then the mouse itself will work well without delivering you no trouble.

As a result, the mouse is to spend several times in the same direction on the rug, just to move the cursor along the monitor screen slightly.

As a result of all this, the time required to perform one operation on the computer is very much increasingly increasing, the nervousness is also much increasing and the user's mood deteriorates and, as a result, the overall performance of the computer is reduced, and sometimes even such work on the computer becomes simply unbearable. But all this can be avoided. To do this, you just need to care for your mouse in time. And, believe me, only a few simple and infrequent operations related to the prevention and proper operation of your mouse, will help you feel permanent comfort when working with it. So, in this article we will talk about how to properly operate a computer mouse and how to care for it.

And here, first of all, I would like to note that computer mice are two main types: optical and mechanical, and therefore, and the approaches to the care of mice must be different. For example, optical mysteries for coordination of the cursor use a pair of LEDs and a special rug on which a coordinate grid is applied. The position of the mouse relative to this rug is constantly scanned using these LEDs, as a result of which it is simply achieved by surgical accuracy in moving the cursor on the monitor screen. There are no mechanically moving parts in this type, so that dust and dirt getting into the inner cavity of the mouse will not affect the sensitivity of the cursor, which means that such a mouse simply does not need to periodically clean its inner parts. The only obstacle to the normal movement of the cursor on the monitor screen can serve as the unsatisfactory surface condition of the mouse pad. I mean that with an excessive dirty of the rug, the mouse LEDs can already be quite difficult to recognize the various troops of the coordinate grid, which can serve as a deterioration in the sensitivity of the cursor on the monitor screen. So, for the prevention of such a mouse, it is necessary to periodically (at least once every two months) clean the surface of the rug from fatty and dust sediments. And for this purpose, you can use conventional soap and hot water from under the tap. Just carefully with soap or with another non-abrasive cleaning agent wash the surface of the rug. After washing the rug, before we use again, I strongly recommend it to dry it very much. You also recommend that after drying the rug, it is additionally wiped his surface with alcohol to finally remove fat deposits from the surface of the rug and thereby slow down the process of further sticking dust on it. The alcohol dries very quickly, and now, just a couple of minutes after the surface treatment with alcohol, your rug will be ready to work. So, the all described above relates exclusively to the prevention of optical mice. But, unfortunately, these mysteries are now very and very expensive, and therefore they may simply do not afford the usual user. After all, as practice shows, now it is mechanical mouses that are most popular for ordinary users. So, in my opinion, the principles of prevention and care are behind such mice will be the most interesting and relevant to the reader. Let us dwell on them.

So, first of all, before we understand with you, how to properly exploit the mechanical mouse, as well as how often it is necessary to make it prophylaxis, you need, in my opinion, understand what is the main reason for the refusal of a mouse of this type? And here the answer is completely obvious - it is, first of all, dust and dirt that poured on the internal moving parts of the mouse, which makes it simply impossible to further work the mouse. But immediately, I would like to notice that dirt, as the main reason, is just only if you use a mouse of a well-known manufacturer (Genius, Microsoft, A4-Tech, and MN. Dr.). But if you decide to save money and acquired a mouse of an unknown manufacturer (no-name) a dollar for one and a half, then, most likely, the dirt will not be the first cause of the failure of the mouse, because This dirt just does not have time to stick. And this will happen due to the fact that your mouse is probably, first of all, "will begin" some insides due to such low quality. So, my advice to you: Never buy no-name mouse, and buy at least some inexpensive mouse, but necessarily a well-known manufacturer.

And yet, dirt. How to deal with it? And here, first of all, I would like to note that you, as a user, you need to create all the conditions for dirt as possible in smaller quantities hit the inner parts of the mouse. To do this, you should make a wet cleaning in the room as often as possible, wash the dust from the computer table, from the entire computer and from the mouse in particular.

Follow the outer state of the mouse housing, it should not be contaminated. In the case of contamination of the latter, it can be wiped with a damp cloth using, for example, tools such as liquid soaps for more successful removal of fatty sediments from the mouse housing. In no case do not wash the mouse with an abundant amount of water, or, even worse, under the jet of water! By this you can disrupt the electronic components that are inside the mouse. By the way, I recommend doing all the work on the prevention of the mouse, disconnecting the mouse from the computer. And do not forget to disconnect and attach the mouse only from the computer turned off from the network, otherwise you just risk burn the port of the mouse. And in no case immediately after washing the housing of the mouse, do not connect it to the computer, let it dry a little, because When washing, water could get into the sink, which can cause the mouse in the event of an immediate power supply to it.

Contain the housing of the mouse clean is important, but not as importantly, how important it is to choose and maintain a mat, which moves your mouse in cleanliness. After all, it is the rug that comes into contact with the ball of the mouse, and it is from him that dust along with fat deposits falls through the ball inside the mouse, where it becomes the main cause of uncomfortable work related to the eating cursor on the monitor screen.

How to choose the right rug, relying only on the optimal conditions for the operation of the mouse and not given the individual tastes and user requests? Here I immediately want to note that there are two types of coating mats: plastic and intricate. Plastic mats are cheaper, but they, unfortunately, do not provide good clutch with a mouse ball. Yes, and at the slightest appearance, dirt require immediate cleaning. And if it does not produce it on time, then without the perfect clutch of the rug with a ball of mouse turns simply into disgusting, with the result that the ball begins to slip. And this, of course, leads to the junction of the cursor on the monitor screen. In addition, the plastic mat rather contributes to the fall of dirt from its surface into the inner cavity of the mouse through the ball. The only advantage of the plastic rug is that it can be very quickly and efficiently washed into hot soapy water, or just wipe with alcohol, depending on the degree of its contamination. And it will dry very quickly. But I do not think that the criterion of the drying time of the rug after its washing can play a decisive role when choosing a rug.

Otherwise, the case is with mats that have a cloth coating. Such mats, though somewhat more expensive than their plastic analogues, but have much more advantages compared to them. For example, a cloth coating contributes to a much higher grip of the mouse ball with a rug, and the likelihood of a ball slipping down to a minimum. In addition, the cloth coating is much longer than plastic, absorbs dust and dirt, which contributes to the smallest pollution of the internal parts of your mouse. But all this will lead to the fact that you no longer need to be so often washing the rug and cleaning the mouse. And finally, the cloth coating is more pleasant to the touch, and if the intricacon rug has a silicone cauldron with a silicone roller under his wrist, then comfort with a long work at a computer is simply provided. Wash a cloth rug, using soap and hot water, and after drying you can wipe with alcohol for additional degreasing. And my advice to you, do not wait for your rug already such "wild" mud thighs that you can easily scratch your autograph on it, and simply periodically wash the rug from dust and dirt, thereby preventing the contamination of the inner parts of the mouse .

But the dirty mat contributes not only to contamination of the inner cavity of the mouse, the dirt on it also contributes to contamination of the bottom side of the mouse housing, namely, small plastic plates round or rectangular shapes are contaminated, located on the bottom of the mouse housing and employees for easier sliding mouse over the rug.

The presence of dirt on these plates, especially on the plates of the circular shape, it makes it very difficult to make the process of moving the mouse over the rug. As a result, it is created so strong resistance when the mouse moves along the rug that the mouse sometimes even begins to move on the table together with the rug, and then work at such a computer turns into a real boiler. So, my advice to you: periodically monitor the state of these plates and when the traces of the mud is detected, immediately clean them. And moreover, follow not only for the state of these plates, but also for their presence. Often, from the inaccurate handling of the mouse, these plates are dug away. And in this case, the dirt is very quickly clogged into the places of their former stay. Working with such a mouse is just unbearable. Dirt on plates is usually assembled in the form of angiosphus. And this dirt is very easily removed by some plastic scraper. Use a knife, carnations or other metal items to scrape the dirt is undesirable to damage the plastic plates themselves. After you are mechanically remove the dirt from the plates of the mouse, I advise you to degrease them with alcohol to prevent excessive further sticking of dust and dirt on them.

But do not forget that no matter how you carefully follow the purity of the rug and mouse outside, no matter how you often do wet cleaning in the room, where the computer is located, the dust that is in this room, will fall into the inner cavity of the mouse. With fat sediments, it will pour the mouse on mechanical moving details, thereby preventing the normal operation of the mouse. And no matter how hard you tried, it is still sooner or later the cursor on the monitor screen will begin to eat. So, to prevent this situation, you need to perform periodic preventive measures associated with the cleaning of the inner cavity of the mouse. And indeed, why wait for the mouse cursor to eat, making work at the computer simply unbearable. It is not easier, let's say, once every three months clean your mouse and care your nerves, always feeling quite normal and comfortable work with her. Moreover, the process of cleaning the mouse you will take, as a rule, no more than ten minutes.

So, how to clean the mouse inside? This can be done in two ways. First, it can be done by applying different sets for cleaning the mouse that are sold, probably in any computer store.

These sets may include various wands, cleaning wipes, balls, special mats, and liquids for cleaning the mouse. It is very convenient to use all these special tools, because it is simply no need to disassemble it to clean the inner parts of the mouse, which makes the cleaning process very fast and easy. Very often, these sets are even quite effective for cleaning the mouse. But it is necessary not to forget also about minuses in the application of these special sets. First of all, and this is the most important thing, it should be noted that the price of such sets is quite high, it often exceeds the price of the mouse itself. It is also necessary to say that whatever your cleaning kit is used, even the most expensive, you still will not be able to clean the inner cavity of the mouse as well as it can be done, disassembled it. So, in my opinion, use the cleaning set for the mouse at home is simply irrational. But, for example, in the case of a large office or computer class, where one dozen computers is located, the use of such cleaning sets will significantly save your time. So in this case, in my opinion, it is quite advisable to use such sets. Use cleaning sets is very simple. For proper work For them, read the instructions for use specified on them, and I'm just sure that you will all work fine.

And now I would like to dwell in more detail how to clean the inner cavity of the mouse at home, without applying any special means. And here, first of all, you need to turn off the computer from the network so as not to burn the port of the mouse. Next you need to disconnect the mouse from system Block. And now that you have a mouse in your hands, you can begin to disassembly. Do not be afraid and feel free to disassemble her body. After all, believe me, the procedure for cleaning the mouse is also available to the most inexperienced user, because There is absolutely nothing complicated in it. In order to disassemble the mouse, you will need small, as a rule, the cross screwdriver. First of all, you need to unscrew a small screwdriver, located in a slight recess on the bottom of the mouse housing. As a rule, the hull, which consists of two halves, holds only one screw, and maybe the plastic latch on the other side of the place where the screw is located. After you unscrew the screw, carefully try disconnecting the housing into two halves. Be careful not to use gross power, so as not to break the plastic latch, the case must easily disconnect into two parts.

Next, when there will be two halves of the mouse housing in your hands, you will see all dust and dirt that formed inside. Believe me, you will immediately see her, especially if I have not revealed a mouse for a very long time. Now you can proceed directly to the cleaning process. To do this, carefully remove the rubber ball, which comes into contact with the rug when working mouse. This ball is best washed with warm water with soap or just wipe with alcohol. It rotates two perpendicularly located cylindrical wheels, which are responsible for moving the cursor in two directions: X and Y on the monitor screen. As a rule, various kinds of dirt sticks on these wheels in the form of visible dust growths resembling a dark gray fluff, as well as in the form of a dense rings formed from fat and dust. These rings of dirt are located on cylindrical wheels in places of contact with the ball.

Honestly, when I first cleaned the mouse and saw these dense mud rings, it seemed to me that these are some special technological thickening on the wheels. And I really could not think that the rings were formed there from dirt.

All dust and dirt that you will see inside the mouse must be carefully removed. Special attention here is taking these dense mud rings on wheels. They, as a rule, can only be removed mechanically. To do this, you can use a small plastic or plastic scraper. Just lay the wheels in those places where tight dirt naked, and here it is better not to be lazy, try to clean them thoroughly. In no case for cleaning the inner cavity of the mouse do not attempt to use solvents, because You can damage some details. Also to remove dirt, especially with cylindrical wheels, do not use metal scrapers, such as a knife or razor blade. Indeed, in this case, when removing solid frozen mud, you risk obtaining jackets and scratches on the cylindrical surface of the wheels, which in no case are not allowed for normal clutch with the mouse ball, and therefore for the normal further functioning of the mouse.

In the inner cavity of the mouse, in addition to two cylindrical rotating wheels, there is also a clamping wheel, which presses a rubber ball to the rug when working mouse. This wheel is also very important to carefully clean from dirt. This can be done in the same way as in the case of two cylindrical wheels.

After you finish the process of mechanical cleaning of the inner cavity of the mouse, as well as the process of removing visible dust sediments, you will need to carefully degrease all mechanically moving parts. Make it best with alcohol or vodka using a small tampon made of soft not porous fabric. Use to clean the internal parts of cotton I do not recommend you, because She leaves after herself a pile that can be in a further obstacle to the normal operation of the mouse, as well as an additional battery dust. When cleaning with alcohol, pay special attention to all the same cylindrical wheels and pressure wheels. Also thoroughly wipe the mouse buttons with alcohol.

After cleaning the alcohol of all responsible knots of the mouse, I recommend also to degrease everything with the same alcohol, if possible, the entire inner cavity of the mouse. This is done in order for dust as small as possible on the inner details. After all, you see, the fatty surface is very much attracting dust.

So, you coped perfectly with the task of cleaning the inner cavity of the mouse, and now you have to collect her back. Make it is completely simple, the only thing that would be noted, pay attention to the fact that the mouse wires get to the right place when twisting two halves of the case, and also make sure that the plastic latch on the mouse housing is not broken. Wrap a little screwdriver, thereby connecting two halves of the housing of the mouse, well, that's all! Your mouse is ready for a "battle" again, you resurrected her, recovered and significantly rejected. And be sure if you carefully and with special accuracy reacted to the cleaning of the mouse, then it will certainly please you with your further behavior.

And in conclusion, I would like to say that along with all sorts of preventive measures related to the cleaning mouse and rug, with a wet cleaning in a room that must be done regularly, you also need to try not to create conditions that contribute to the rapid pollution of the rug and mouse. It is very easy, just do not forget that the mouse pad and the stand, for example, for a glass of coffee or for a fat sandwich is not at all the same. Please take, more seriously at this point, and then you will be able to not only increase the time between the cleaning of the inner cavity of the mouse, but it will also be possible to increase the total life of your "rodent". And I'm just sure that when complying with all the very simple principles for the care of the mouse, described in this article, your mouse will serve you in good faith for many years and will never disappoint you.