How to remove documents in contact. Where are you like adding, send and delete documents in VK

In the program 1C, virtually no object cannot be physically deleted. This feature Configured in roles ("Delete" and "Interactive Delete" Rights). Usually, the developer does not allow such actions to avoid deposits further.

Marking on deletion means the irrelevance of the object for the user. When installing the note on the document, its holding is automatically canceled.

Example of removal of the directory element Nomenclature

In our example, we will delete an item, but the process of deleting a document or any other object is no different from the instructions given.

Set the mark on the removal directly from the list form this reference book. To do this, select the position you need and click the DEL key on the keyboard (or using the context menu).

The program will ask us the question of the need (or withdrawal) marked for deletion. Reply "Yes."

After that, the reference book selected by us will appear. We remind you that if the configuration object has access rights to delete, or interactive removal, then with the combination of SHIFT + DEL you can immediately delete it physically.

Now you can proceed to the direct removal of our reference feature. If you are not available to this functionality, it means that you do not have the right to him.

Select "Deleting marked objects" in the "Administration" menu.

Also, this functionality is available in the "All Functions" menu.

In the window that opens, the program will offer you to choose whether you want to remove all objects marked to delete or only some. In our example, we will only delete the range "Edged 50 * 250 * 300".

Some time the system will calculate if other objects do not refer information base On our board. As a result, the program issued us a notification that removal is impossible.

So that our nomenclature is still retired, you must mark all objects in the table on the right. Another option is to replace our object everywhere.

With prostanna, you should not have problems on deletion from related objects, so we will choose a replacement.

Click on the "Replace ..." button.

Choose the nomenclature position on which the replacement will be replaced in all related objects. After that, you will again be available window for re-delete. This time everything went successfully, what did the program notify us.

Automatic removal of marked objects on schedule

In newer versions of the 1C program (starting from 8.3), the developers have added a very convenient ability to automatically remove marked objects on a schedule. Let's look at how to make this setting.

In the form that opens, go to the "Regulatory Operations" section and set the flag in the "Automatically delete marked scheduled objects". After that, you will be the active hyperlink "Set up Schedule". Go through it.

You will find a standard schedule setup form. If necessary, you can change the default values, but so that the start-up time for this regulatory operation does not coincide with the working time of your organization's employees.

From this article, you will learn how to finally delete marked objects in 1C. The fact is that in 1C removal of objects occurs in 2 stages:
1. Installation of the mark on the deletion (a small red crossed appears in the list of the object)
2. Removing marked objects.

Such a system is necessary, because Removed reference items can be used in any documents. And if the program would allow to immediately remove these elements, they would be removed from the documents and thus would be violated.

At the removal stage of the marked objects in 1C, it is valid for the use of objects removed in other objects. And if used, the program does not allow them to remove them. But the program shows where removed objects are used and you, if you wish, you can open them and eliminate the removable items from them, after which it is possible to repeat the removal operation of the marked objects.

How to remove objects in 1C 8.3

Consider in detail how to finally delete marked objects in 1C 8.3 on the configuration example, on managed formas - "Trade Management 11.2".

To begin with - 1 - select the object you need to delete, select it and click on it with the right mouse button, in the window that opens

3 - We see that the objects we selected are marked with a red cross (see Figure below).

4 - in the menu "NSI and Administration" - "Administration". 5 - "Support and maintenance" (see Figure below).

6 - in the "Support and Service" submenu, choose "Deleting marked objects" and
7 - set the "tick" opposite the regime " Automatic removal all marked objects ", then click
8 - "Delete" button (see Figure below).

10 - Here we see that the removal of marked objects is completed, after which we press
11 - "Close" button and can continue further work in the program (see Figure below).

How to remove objects in 1C 8.2

And so, in this article "Above" has already been considered as a complete removal of marked objects in 1C 8.3, i.e. In configurations on managed forms such as UT 11.2
Now for the full disclosure of the question "How to delete marked to remove objects in 1C" will need to go back to the procedure complete removal But already for example 1C 8.2, i.e. Configurations on "ordinary forms -" Trade Management 10.3 ".

To do this, we will need to pass 11 steps:

1 - To begin with, select the object you need to delete, select it and click on it right mouse button, in the window that opens
2 - Select "Set the Removal Removal" (see Figure below).

3 - In the appeared window, press "yes" (see Figure below).

4 - Now we see that the object we selected became marked with a red cross (see Figure below).

5 - in the menu "Operations" choose
6 - Deleting marked objects (see Figure below).

7 - in the window that opens, click "Yes" (see Figure below).

8 - In the "Search and removing marked objects" window, press the "Control" button (see Figure below).

9 - In the "Delete Objects" window that opens, click the Delete button (see Figure below).

10 - after all the actions performed, we see that "deleting objects"
11 - Press the "Close" button and can continue to work with the program (see Figure below).

You removed marked objects. If you need to delete all documents from the database, you can take advantage

Documents that in in electronic formatIn real (on paper), have a property at some point in time to be very important, informative, in general, useful. And then, after a day or another or a week, it can turn into useless trash (again, in digital obstruction or waste paper) as unnecessary.

This article will help you remove all unnecessary documents from your personal profile by Vkontakte, and will also take on some nuances of "disposal" of downloaded files.

Removal

2. In the main menu (list on the left side of the avatar), click the "Documents" section.

Attention! If on main page VKontakte, in the list, the "Documents" section is not displayed, open "My Settings" and on the General tab, check the checkbox in the "Documents" setting.

3. On the http://vk.com/docs page, Mouse over the download field you want to delete. And then clap the "Cross" icon that appeared.

Attention! When you delay the tape record with the attached file in the Doc, TXT, DJVU format from the page, only its text is neutralized from the page, and the downloaded file is saved in the appropriate section. That is, by deleting recording, you cannot delete attached files.

Restore remote file

If you mistakenly delete the file, click on its field "Restore" link to return to the place.

Instruction

In order for the program 1C enterprise 8.2 to remove an unnecessary document, you must mark it for deletion. For this there are several ways:

Move the cursor to the document, click on it right mouse. To the submenu, select "Install Removal Removal";

Move the cursor to the document, click on the toolbar on the Delete icon (sheet with a red cross).

The dialog box appears: "Mark the element to delete?" - Yes.
After that, the document will have the status "not spent", a red cross will be installed on it.

To restore marked to delete a document:
- Move the cursor to the document, click on it with the right mouse button, select "Remove the Removal Removal" to the submenu;

Move the cursor to the document, press the Delete key on the keyboard;

A dialog box appears: "Remove the mark from the element to delete?" - Yes.

To destroy marked to delete documents, you need to go to the menu item "Operations". To the submenu, select "Deleting marked objects".
A dialog box appears: "Preparation for the removal of marked objects may take a long time! Continue performing an operation? " - Yes.

Inventory of all elements that are marked for deletion will be opened. You must click on the "Control" button, then on the Delete button. After that, all items are removed, it is impossible to restore them.

note

In the information database, when destroying marked to delete objects, only one user can be located. Another information database users need to be exit.

The user who wants to destroy the documents marked for deletion should be the right to carry out this operation. Rights for users sets the database administrator.

Removal is a very responsible operation that often leads to irrevocable loss of information. In addition, there is a danger of error to delete the necessary data. For this reason, the programmen of the program 1C approached quite seriously to the implementation of this function.

You will need

• - Program "1C: Enterprise".

Instruction

Run the program "1C: Enterprise", open the desired database. Configure the deletion mode of the document in 1C. To do this, go to the "Service" menu, select "Parameters", go to the "General" tab. In the bottom line, you can set the option to delete objects. It can take two values \u200b\u200b- "direct deletion" or "Mark for deletion". Select the second option and click OK.

Open the directory from which you want to delete documents 1C. Install the cursor on the line with the document, click on the DELETE key, or on the toolbar, click the Delete button. You can also mark the deletion document using the appropriate command in the Actions menu. After these actions, the documents will not be deleted, but the pictogram of their state is crossed out by the cross. At any time you can cancel this mark the same ways.