Configure the Internet after reinstalling Windows. How to set up a router without a specialist

Hi friends! Very often, responding to comments on this site, I have to explain how to remove the wireless network connection On a laptop (netbook), or on a computer with a Wi-Fi adapter. And then re-connect to the wireless network, entering a password to access it.

Why do you need to delete a Wi-Fi network and connect to it again? Very often, such a procedure is necessary if you changed the password on a Wi-Fi router, or changed the type of security, or encryption. About how to change the password on the router, I wrote in the article.

Just after you change the password, or the security type (encryption), the computer will most likely refuse to connect to Wi-Fi. May just have a connection for a long time, and then some error appear. It is possible to appear. "Windows failed to connect to ..." (by the way, I wrote about this problem). It is also possible to identify the problem and still all sorts of different errors. When problems with connecting to Wi-Fi, I advise you to remove the connection and connect again. Now I will tell you how to do it in Windows 7.

Go to Control Panel \\ Network and Internet \\ Wireless Network Management. You can: Right-click on the connection status on the notification panel and select "Network and Common Access Control Center".

Right-click on the desired network and click on the item. Delete Network.

All, the network is removed. You can connect again and enter a password (possible new one).

Press the connections to the tray. And among those available for network connections, click on your network. Click Connection.

Enter the password and click OK..

Everything should connect, and I hope to work normally :).

Insert the Internet cable to the WAN port (or Internet) of your router (it is the same router).

Connect the router to the computer: insert one end of the network wire in any of the LAN ports of the router, and the second is in the PC network card connector. Instead of a cable, you can use a wireless connection, but at the setup stage it is better not to do.

Connect the router to the outlet. If the device has a power button, click on it. Then wait one or two minutes so that the router manage to boot.

2. Check the Internet operation

If your router was configured in advance by the provider or received settings in automatic mode, the Internet can earn a few seconds after connecting the router to the PC.

To check, run the browser and try to open several sites. If there are no problems with access to web resources, you can skip the fourth item of the article.

In the browser address bar, enter 192.168.1.1 or 192.168.0.1 And press ENTER. One of these IP addresses should lead to the router settings menu. If both options are not triggered, find the right IP address in the documentation for your router model and try entering it.

When the entry page appears in the browser window, the system can request a login and password. Most often, with a primary connection for both fields one word is suitable - admin.. Less frequently as standard password, router manufacturers use a combination 1234 .

If necessary, you can find data for entering the instructions for the router or on the provider's website. Well, or try alternative.

4. Configure Internet connection

If the Internet has not yet earned, the router needs special settings. What parameters you need depends on specific model Devices and supplier of Internet services. Universal configuration does not exist. To obtain the desired instruction, Check the provider's website or request it from the support service.

Request guidelines for setting up your model, follow his prompts. If you configure and connect to the Internet in the process, and home network Wi-Fi, you can miss the fifth article.

To Wi-Fi, it is important to choose the correct security settings.

In the Settings menu, find the section responsible for wireless network (See the documentation for your router model). Certainly ask here reliable password (It will be needed to connect to the router of your Wi-Fi devices) and select WPA2-PSK. As a means of protection.

6. Change the password to enter the router settings.

Just in case it is better to limit the access of foreign to the router settings menu. If the router is still under the protection of the standard password, replace it with your own.

Find the settings section that is responsible for security (see the documentation for your router model) device, and specify a new reliable password here. Save the changes.

If you have in your computer wi-Fi moduleafter completing the setting network cable You can pull out from the PC and connect to the router over a wireless connection.

7. Install the router in an optimal place.

Ideally, the router in the center of the zone in which you use Wi-Fi. Thus, the signal will be equally available to all connected devices.

The smaller the walls, furniture and other barriers between the receiver device and the router, the better the wireless network is working.

Often after reinstallation operating system Devices and drivers are in place. However, there are cases when you need to download the driver or update the available software. However, to download the driver, you need to restore the connection - novice users are simply found in a closed circle. But really, everything is simple - to connect with the worldwide web, you need to own a network card.

We restore the Internet on the new Operation

Consider more of several options for solving the problem.

Perhaps the easiest option is to find it. optical diskwhich you got in the configuration with the computer. It is enough just to insert the disk and download all the necessary drivers. Often it is enough to just restart the system and calmly download sites.

If you still use the Internet via the modem, then after reinstalling the system, you need to re-enter the TCP / IP settings every time. We must assign the network address, server to the computer and specify the gateway. Skip this process will not work without specifying this information, not to connect to the Internet. Consider step by step to enter the necessary data.

Clay on the tray and choose the option "Network and Common Access Control Center".
Go to the masonry "Change adapter settings".
Click tab "Connections by local network» And call properties.
The next step should select the network protocol (TCP / IPv4) and set to properties again.

In the window that appears, you must fill in all fields. You can do this by contacting the provider and specify all the parameters. If you correctly specify all the information, you can immediately use the World Wide Web.

Consider another solution to the problem. To use the Internet after reinstalling the system, you need to put special utilitywhich is responsible for availability necessary drivers. One of these programs - DriverPack Solution. This is a fairly popular program worldwide, it contains all the necessary drivers for Windows. You can download it for free. The utility has the ability to update the drivers without connecting to the network - in this, undoubtedly, its advantage. Note the main advantages of the program:

recognizes the device automatically and selects the desired drivers,
has the ability to update
diagnoses the state of the processor, temperature,
checks the action of antivirus.

The utility has a fairly simple interface, provided by two versions: a lightweight version and for DVD. The first option does not contain the finished database of the drivers, this program only finds the necessary of them and downloads. The update is also not provided. The second option of the utility provides all the functions described above.

It is necessary to take into account one shortage of the program - the size of about 8 gigs, and also an ISO image.

To use the service, you must perform the following actions:

Swing torrent file.
Unpack the archive to drive D.
Then reinstall the system.
Download new system And go to the specified folder. Run the program.

On this, everything, the utility itself will diagnose and install the necessary drivers.

3dp net.

The next way to resume the Internet connection is to use the other utility. The program is similar to the previous one. 3DP NET also allows you to easily update or download the necessary drivers without accessing the network. There is nothing complicated again - you download the program, run, scanning a computer, then download the necessary drivers for the network adapter. We put it and use the Internet.

However, many user feedbacks suggest that the utility does not always pick up high quality necessary driver. But some appreciated the simple interface, functionality and accessibility of the utility.

The latest versions of the program have already been updated, many flaws are taken into account and the driver of the drivers is expanded, so it is quite possible that you are lucky.

You can also execute backup Operations and restore it. To do this, you can use a special utility. For example, Drivermax is one of their most popular and demanded programs.

The utility is in demand due to the free and ease of use. You will not need to store a lot of disks with softwareNow everything is enough to group and use the drivers for any problems of the OS.

How does the utility work?

The first action program recognizes computer information, detects the available drivers and shows the list. For each driver detected, the data is shown: the version is shown when created, digital signature.

The export wizard found files saves in the archive to the right place. Next is still easier: After reinstalling the system, you just put back saved drivers. It will take no more than 10 minutes of time.
The program has a serious functionality and can perform the following functions:

collects all the information about the available drivers,
creates a detailed report
copies all drivers to the specified folder,
imports drivers after reinstalling the system,
updates drivers if there are new versions.

Taking into account! The program offers to install your toolbar, as well as additional utilities and search services. This does not apply to the work of the utility itself.

It is also worth noting that the program is free, but registration is required. It does not take much time as the use of the utility. For creating backup just just 5 clicks.

We use the second computer

The sixth way requires the presence of a second device - needed personal Computer Or a laptop that has a connection to the World Wide Web. To resume the Internet, perform the following steps:

Click at the same time windows keys and r.
A window will appear where to register "MSC".
We see device manager. We go into the properties of network adapters.
We find the tab "Details", then "ENGLISH ID".
Next you need to copy the released number.
In the notepad we find the value of Ven and DEV. We are looking for the driver you need in the search engine from the second laptop or PC, copy to the USB flash drive, install and again use the Internet.

Setting up shared access in Windows XP

Consider the features of connecting to the network in Windows XP, in particular, through general access. This parameter allows one connection to be used for several devices.

We will analyze step by step, how to set up. Need lAN card To connect to LAN and the second - for the World Wide Web.

So, the parameters on the main device:

We go on the administrator.
Start - Control Panel.
Find.
Click on Network connections.
Clay mouse on the desired connection, select the properties.
Select the section additionally.
Further important moment - You must set the parameter "Allow other user users use the Internet connection this computer» (Check box).
If you set a call on demand, the device will be able to connect to the Internet automatically.
I confirm the operations we produce and save.

Parameters for other devices:

To connect to the network in this way, you should pay attention to the IP parameters for the LAN network card, and then go to client devices. To check the network card settings, perform such steps:

We go like admin.
Attend Control Panel through start.
Press Network and Internet Connections.
We find the connection parameter on the local network, we clas on it with the mouse, causing properties.
Reverable in order: general, components used by this connection, Internet protocol. We call properties.
In the window that appears, select Get an IP address automatically And confirm the action.

We visit Start and Control Panel.
Clay on the section Network and Internet Connections, Call the parameters.
A window will appear with the properties where we need the connection tab.
Click on the installationAfter which the connection wizard should be displayed. Now follow the prompts of the master and press further.
Click Connect to the Internet, go ahead.
Further choose manual connection.
We note the parameter Connect through a constant high-speed connection.
We agree with all the established parameters and click ready.

That's all. Now you can work online through the main computer.

Thus, you can choose any option from the listed. If you want to be confident in the safety of all drivers and all settings, of course, the most optimal option is to establish one of the programs. The saved file does not take up much space and allow you to resume all options at any time. The only important point is to think in advance and put the utility.

Renewing the connection after reinstalling the system does not take much time and effort. Reading the instructions and using the programs, you can use the Internet without failures.

Initially, in order to connect a mobile bank, you need to have a plastic card of Sberbank, decorated in advance. If the bank's card is already available, the service connection can be connected to the most convenient way:

1. In the nearest branch of Sberbank of Russia;

2. by telephone hotline;

3. Using self-service devices (ATMs, payment terminals) Sberbank.

In order to connect the service Mobile Bank, you need to go to the nearest branch of Sberbank. With you, you need to have a passport certifying your identity of the owner of a plastic card of the bank, a registered mobile number and the map itself, which you plan to connect to the service. The operator of the banking department will help to write a statement and tell in detail about the plug-in service, as well as the existing tariffs on the "full" and "economy" packages.

The possibility of connecting the Mobile Bank service is also available at the design of the Sberbank plastic card or under the terms of the banking service contract. There are cases when the client has several bank cards, they can also be connected to a single mobile phone number.

The activation period of the plug-in service varies from 1 to 3 days.

There is enough reason to choose this option to connect to the Mobile Bank service. The call on the telephone hotline of Sberbank, no doubt, will save you a lot of time. If you know the answers to check questions, you can safely dial the number. 24-hour service Support 8800-555-5550 or 7495500-55-50. Among the questions that can be set by the operator may be:

1. Your phone number;

3. Your passport data (series, passport number);

4. Secret word, control question-answer;

5. Last you committed Purchase by bank card

It is quite convenient and easy to connect the service Mobile bank through the self-service terminal or the Sberbank ATM, because they are located at every step and find them will not be difficult. Nevertheless, it should be aware that such an operation can be supported by all devices. It is also necessary to draw attention to what taking advantage of this option, the mobile bank service will be connected to the same map, with which the system is registered in the system.

You need to insert a plastic card into the self-service device and enter the PIN code. In the main menu that opens, you need to click on the Mobile Bank service.

Next, select the "Connect the Main Card" item, specify the preferred tariff and enter your phone number. If all the data you have entered correctly, then on your mobile phone number will be a SMS notification.

You should know that the Mobile Bank service is provided free of charge, but an additional commission will be charged for connecting the "SMS confirmation" option.

Today we will talk to you about how to connect "Mobile Bank" through the phone. In addition, consider both the other ways to help us begin to use this service. In fact, options are not so much here. Nevertheless, it is worth understanding. Let's see what Sberbank offers us.

If you plan to use the Sberbank online system ("Mobile Bank"), you can connect this service only if there are certain documents and after some preparation. In fact, all this is not so difficult, as it seems.

The first thing is necessary is the presence of a plastic card. Without it, you will not work. In addition, you will also need the details of your "plastic". Usually there are no problems.

The second point is the presence of a passport. For some operations will have to be personally in the department of the bank, where to serve you will be started in the presence of a document certifying the person. Also not so problematic.

Last moment is mobile phone. If you think how to connect the Mobile Bank service, then, of course, you will have to capture your cellular. Without him, strictly speaking, nothing will come. The last item is time. Follow patience. Now you can proceed to work. After that you can easily use Sberbank online. "Mobile Bank", connect which we are now trying to help you in this.

Well, let's consider with you the most interesting, but not the easiest option of developing events. The thing is that if you think how to connect the service "Mobile Bank", you can always carry out this action with a personal visit.

All that will be required of you is to write a statement. After that, you confirm your desire to use this feature. Card, passport and phone took? Then go to the nearest branch of Sberbank and occupy the queue leading to the customer service window on issues plastic cards. A few minutes of filling out the application - and all problems are solved. Honestly, it's easier than to think, how to connect the "Mobile Bank" through the phone. Nevertheless, there are still a number of some opportunities. Now we will meet with them.

Well, there is another pretty interesting approach to solving the problem. If you think, how to connect "Mobile Bank" through the phone, you can stockday and patience, and then call a special help service.

Take the phone and call the number 8800-555-5550. Wait for the answer and contact the operator. Name the reason for which you turned. After that you will be asked to name the number bank card, Secret Word, your initials, as well as a place of registration on the passport. When an employee make sure that you are the real owner of the card, you will be asked for which number you need to connect the Mobile Bank. Name it and then wait for the answer.

As soon as the operator informs that the application is drawn up, you can rejoice. About a few hours later, an SMS notification will receive you a mobile phone that will report on the successful completion of the operation. That's all. Now you know how to connect the "Mobile Bank" through the phone. True, this is not the only option. Now we will see with you, what else can be done.

Well, and here is another pretty interesting approach. We have already figured out you how to connect the "Mobile Bank" through the phone, now let's consider another method that will help you in the task.

The thing is that any Sberbank client can easily use the "Mobile Bank" using a terminal or an ATM. That is, these cars will help us connect the service. Make it is quite simple. You will need only your bank card and mobile phone. When you decide, go to any ATM or terminal.

Insert your card into a special receiver. At the request of the system, enter the PIN code. As a result, you will get access to the main menu. Find and select the following: "Mobile Bank service" - "Connect". After that, the selection menu will appear. There you will be asked what tariff you would like to connect - "Full" or "Economy". Choose anyone as your heart, and then press "continue." In cases where you plan to actively use a bank card, it will be better to choose the first option. It remains easy to enter mobile numberTo which "plastic" is tied. That's all things. Now you can wait for SMS alerts, and then actively use all the functions acquired. Let's now consider some more of quite interesting questions regarding the "Mobile Bank". All this will definitely help you.

It should be noted that if you think about how to connect the "Mobile Bank" via SMS, you will have to leave this vent. The fact is that there is no such possibility. Nevertheless, there is another rather interesting approach to obtaining this function.

In modern financial institutions, the Mobile Bank is connected to the Client immediately upon receipt of a bank card. Honestly, it is very convenient. Especially if you do not want to easily understand the connection methods. In addition, this service facilitates work with the Sberbank Online Site.

So if you decide to get a bank card, then ask when receiving a service connection. Although, frankly, you must offer her bank employees. They will cope with the task of literally in a few minutes. After that, you can pick up plastic and rejoice in the results.

There are several options for developing events. Let's start with you to deal with the most simple. If you think about whether you have a "Mobile Bank", then try to make a purchase on the map, and then look at your mobile phone. If you change the balance you will come special alerts. If they do not get you, then we can say that the function is disabled.

In addition, you can always contact the nearest bank branch for help. You will ask you a passport, card number, as well as a mobile phone number to which "plastic" is tied. Employees will communicate, the service is connected or not. Also nothing difficult. And now let's see with you that it can still concern our today's theme. For example, let's try to disable the "Mobile Bank", as well as to tie it to another number. After all, these questions are very often asked modern customers.

Well, we have already considered with you, how to connect "Mobile Bank" through the phone. Now let's try to give up this service. You can do this in several ways. Nevertheless, many customers note the fact that it is best to use an ATM or a payment terminal.

If you decide to "distinguish", you can use your own mobile phone or even a visit to the bank. In the first case, send an SMS with the text: "Refusing mining" (ply) to number 900, and then wait for the results. After a while you will receive alert, in which it will be said about your refusal. As you can see, nothing complicated.

The second option implies nothing but a refusal of services with the preparation of the application. Take a card with you, passport and go to the bank. There fill out the application. Now you can wait for the results. Nothing difficult.

When working with ATM, insert "plastic" into a special receiver, then type the PIN and visit the Mobile Bank section. Select the "Disable" function there, and then continue. That's all. Ultimately, you will be disconnected from the "Mobile Bank". Let's now see how you can tie a new number to the map.

So, if you suddenly needed to renovate the phone to the card, you will have to resort to the use of the "Mobile Bank". Honestly, here you should contact everything that was written earlier. First of all, refuse services on one phone, and then just select any suitable way to link a new number.

Honestly, an ATM is best suited for this. If you suddenly confuse, you can always ask for help from a bank employee. As you can see, the service "Mobile Bank Sberbank" is very useful. Connect and disable it just enough, if you know where to start. Now you know all the approaches that concern this issue.

Today we have to find out how to connect the "Mobile Bank" through the phone. This feature is interested in many citizens. Especially those who actively use the services of Sberbank. Activated on the phone the opportunity greatly facilitates the life of the population. Therefore, many are interested in her. So what should everyone about connecting it?

Before reflections on how to connect the "Mobile Bank" through the phone, you will need to figure out what service are we talking about. What does this provide a similar opportunity?

Mobile Bank is a service that allows you to use the services of this or that bank to use the services of a bank. To date, this opportunity has many organizations. But most often we are talking about Sberbank. It is on his example that the process of connecting the possibility will be considered.

It is worth paying attention to the fact that you can connect the "Mobile Bank" service through the phone (or in any other way) only if there is a bank card. And only the immediate owner of plastic has the right to realize the task. This will have to remember.

How can you be able to connect Mobile Bank from Sberbank in principle? To date, 3 methods are offered. A citizen himself has the right to choose a suitable way to connect.

Among the main connection techniques are distinguished:

Appeal to the offices of Sberbank. Employees will help embody the idea of \u200b\u200blife. As a rule, this option is not so often in demand. It is embodied with the primary manufacture of a bank card to facilitate the work with plastic.
Use of self-service terminals. For example, ATMs. Payment terminals also help connect the "Mobile Bank". Good way receiving / refusal from the service, but it does not always take place.
Call to Sberbank Call Center. The extreme method, in practice almost does not take place.

There are no more connection options. But you can disable the service even with mobile device.

If a citizen thought how to connect the "Mobile Bank" (Sberbank) through the phone independently, he must first understand what specific opportunities will open after the realization of ideas in life.

As already mentioned, "Mobile Bank" allows you to manage a bank card through a mobile phone. More precisely, the connected service allows you to:

receive SMS messages about transferring money on plastic;
inform the client about the payment performed from the card (about the write-off of funds);
replenish the account of the mobile without much difficulty;
receive extracts from the history of the operations carried out with the card;
block plastic;
translate money from the card to other citizens;
carry out certain payments.

It turns out that the "Mobile Bank" is a very useful service. She will really facilitate the life of the client. But how to connect "Mobile Bank" through the phone? What should everyone else know before?

It is also necessary to draw attention to the fact that the opportunity is not free. For it will have to pay one month and another amount. It all depends on the selected connection fare.

There is an option "economical". It is free, but requests require payment every time using. For example, obtaining information about available money on the map will cost 3 rubles, and the 5 recent operations - in 15. Notifications about all plastic operations are not provided.

The package "Full" will cost 60 rubles per month. In this case, all notifications and requests are free. When connected, each can choose which package to use in the future. Nothing hard or special!

In order to figure out how to connect the "Mobile Bank" through the phone, you need to properly prepare. After all, it will depend on it whether the use of the service will begin.

To date, the activation of the "Mobile Bank" by phone will require a citizen:

passport details;
test word (it is set when the map is released);
banking plastic details that will be serviced;
phone owner card.

PIN from the card is not required. If employees ask to call it, you can complain and abandon the activation of the service. How to connect "Mobile Bank" through the phone? Several actions - and the case is done.

It is important to know which numbers are used to activate the service. Customers, as already mentioned, can begin to use the opportunity to address the Sberbank Call Center. To do this, it is enough to call on certain numbers.

What exactly? How to connect the "Mobile Bank" through the phone? The following combinations will help:

8 495 500 55 50;
8 800 555 55 50.

In the first case, you can use a call number from anywhere in the world, in the second - the hotline phone is served only in Russia. Take advantage of combinations offered at any time. The specified rooms are round-the-clock. This means that you can start connecting at any time of the day.

How to specifically connect the "Mobile Bank" (Sberbank) via the phone? SMS on successful activation of the service will come after the client will do a few simple steps. They will help start using the opportunity studied without much difficulty.

Instructions for connecting the services under study are given:

Take a bank card Sberbank. Debit plastic required.
Tail to the map phone. Typically, this operation is carried out upon receipt of plastic in the Sberbank Office Office.
Dial on your mobile device one of the previously specified numbers and wait for the answer.
Inform the operator about the intention of the "Mobile Bank" intention. It is recommended to immediately clarify the package selected to use.
Name the data that requests the operator. First you need to tell the bank card number, which will be served by the "Mobile Bank", then the code word, as well as F. I. O. Owner, sometimes - registration.
Report the phone to which the client will use to manage a bank card.
Wait for a while. The operator will verify the correctness of the data, then will issue an application for connecting the service.
The mobile device will receive a message about the successful connection of Mobile Bank. This usually happens a few minutes after the call. That's all, the thing is done!

From now on, it is clear how to connect the "Mobile Bank" yourself via the phone. No more significant action is required. You can only form a message and send it to a combination of 900 with the text: "Help" (without quotes). This feature will help to obtain information on how to activate certain capabilities of the "Mobile Bank".

No more information will be required. Many people talk about to accurately predict when connecting the opportunity studied through the phone is recommended, it is impossible to find out. There are no accurate recommendations for this issue. Each citizen himself has the right to choose the method to use.

From now on, it is clear how to connect the Mobile Bank (Sberbank) through the phone. SMS-alerts on card operations will begin to come immediately after activating the service and the commission of certain actions with a bank account.

Some say that the telephone connection is not the most the best way. Sometimes reviews indicate the activation of the possibility of not on that number. This nuance delivers a lot of trouble.

Sberbank's mobile bank was created to attract new customers, including large, and it is used to organize more comfortable maintenance of existing users. With such a service, there is no need to constantly call the operator to the Count Center or attend the Bank's Department. All major operations are available here and now. The only condition is a mobile phone with an active network.

With this option, the user of the bank card of Sberbank receives the following features:

Instant notifications. Information about all credits and write-offs from the account is displayed in the SMS message.
Balance information on request. You can get a mini-extract on the valid cards.
Mobile account replenishment. The Commission is not charged.
Money transfers from one bank card to another.
Money transfer by name. You can assign the user a specific name and transfers to its card without unnecessary time costs.
Repayment of the loan. You can pay for debt using one message.
Service information. The owner can get a detailed help in the first-demand report. For example, current information on the capabilities of the card or on the history of their banking operations. Displays the latest 5-10 operations.
Suspension or lock card. The function is usually used if the card was lost.
Blocking banking services. However, in some cases, the fee for it continues to be charged, and the user will have to turn to the bank operator.
Activation and deactivation of the "Autoplating" function. You can write off the Card specific amount by default - for example, to replenish the balance on a mobile account.

Thus, the mobile bank service saves the user time. He can comfortably dispose of its means without leaving home or office. At the same time, there is no need for the Internet. In addition, such an option is still considered one of the most protected hackers.

Service connection does not take much time. You can do this in several ways:

In the nearest branch of Sberbank. The process takes no more than 10 minutes, not counting expectations in the queue. Registration occurs during the receipt of a bank card or separately. To submit a request, documents are required that certify the identity (passport). It is enough to leave the consultant to the filled statement form, and within three working days on the current mobile number of the card holder will be notified of the activation of the service.
In the Sberbank Contact Center. Need to type single number Countain and wait for connections to the agent. He will ask for identification (you need to call your passport data or voice the latest operations on the card). Mobile number for SMS banking should be the same as in the Card Design Treaty.
Through Sberbank online. To use the Internet will need. To enter the personal AreaYou need to enter your mobile number and password. Next will need to find in your office links located under the main menu. You should select the link "Mobile Bank - Connection Details". A new page will be downloaded to the "Activate" option. Connect the mobile bank online will be able after the client chooses the optimal tariff package.
With the help of the self-service terminal or the Sberbank ATM. To do this, you need to insert a map, enter a pin code, find the Count "Connect Mobile Bank" and choose the optimal tariff. However, not every self-service device has such an option, so in search of a suitable ATM may sometimes take time.

But despite this, Sberbank customers note that it is convenient to connect banking with the latest way.

As soon as the extension is actively, the user will receive on cell number Notice with the following text: "Mobile Bank - Registration Successful." There also displays a list of connected cards. In the content of the message are prescribed:

abbreviation card names;
the last 4 digits of the connected card;
service status - active (ON) or not active (OFF).

In any case, to connect a mobile bank you will need to choose a tariff plan. There are only 2 types of them:

Economical tariff. Monthly subscription fee not. The client pays the service in fact. For example, the request of the current balance is worth 3 rubles, and information about transactions - 15 rubles. However, SMS notification of removal, replenishment or other banking operations will not come.
Full. The first 2 months use of this tariff for free. Next - monthly from the user account is written off the subscription, which depends on the type of card. But the client receives a full range of SMS capabilities.

The launch of the mobile bank does not require additional payments regardless of the tariff.

So, the Sberbank Mobile Bank feature is quite popular among users. It allows you to keep up to date on your bank accounts and dispose of them fully. At the same time, there is no need to communicate with the operators of the count center and in the visit of the bank. You can connect such an option in 4 ways. Each client chooses the most optimal option. Banking is also not complicated. This service will be useful to each owner of the bank card.

Mobile Bank allows you to send a variety of SMS commands to Sberbank, each of which meets the request for a specific banking operation. This service can be connected in the Bank's Office, using an ATM, Internet banking. An independent connection of the Sberbank mobile bank on the phone is an easy procedure.

Before moving on to the question of connecting the service, it is necessary to choose the optimal tariff plan. To date, there are two:

Free - Economy.
Paid - "Full". You can learn more about the tariffs on the Sberbank page: Mobile Bank Economy Tariffs and Full.

Based on the title, it may seem that the first option is cheaper. However, it is not suitable for everyone. And the reason why the following nuances become:

for the service of one-time clarification of the balance, a fee of 3 rubles is removed;
for checking the latest operations - 15 rubles;
there are no notifications of increasing flow and balance on the score after the removal of money.

But just the last item is especially important, because Allows you to track the action of fraudsters. As for the Tariff "Full", then the payment is not so significant. For a format card:

Classic - 60 rubles;
Maestro - 30 rubles;
Visa Electron - 30 rubles;
GOLD and other premium categories - free.

Voiced tariff plans have a number of common features:

Mobile account replenishment (your number or any user);
Listing money between different cards;
Transfer to private individuals who are customers of Sberbank. To do this, you need to know their phone numbers;
Payment of services of companies of different areas of activity;
Payment of credit debt;
Connecting existing services;
Card lock in case it was stolen either lost.

Deciding with the type of optimal package, the time to learn the connection of the Sberbank mobile bank on the phone. You can do this with the help of any mobile device, or through the nearest ATM.

Insert and activate the map.
The menu will be displayed in which you need to find the "Mobile Bank" and press the appropriate key.
Next, you need to select the option "Connect the Main Card" if it was not done earlier. All other items are needed only for operations available in the activated service.
After that, you need to choose the tariff.
Next, the screen will display the phone number, which was indicated during the registration of the map. Here it will be necessary to click the "Continue" button.
The first SMS of standard content will come. Sometimes it takes about three days.

Detailed instructions, how to use an ATM,

available here

Connecting a service via phone

Connect a mobile bank using a phone using the phone using short number 900.

By calling B. Contact center Sberbank, you can:

Contact the operator.
Act according to voice prompts.

If there is a desire to communicate orally with a representative of the bank, then after automatic greeting You should click on the phone number "0". An employee of the Center will definitely conduct identification by asking several questions:

plastic card number;
the code word obtained in the process of signing the contract;
passport and individual personal data;
information about last operationspent on this map.

After that, the contact center employee clarifies which tariff is selected and activates the service. Next will come notice with proper instructions and the use of the mobile bank will become affordable.

Sometimes it happens so that hot line The contact center is overloaded, and it is almost impossible to reach there. This case does not prevent you know about connecting a mobile bank of Sberbank on the phone.

To do this, it is necessary:

dial the contact center phone;
if you need services and products for individuals, press the "3" button;
choose a section related to remote control Services (Sberbank online and mobile bank) - Press "2";
need a mobile bank - to introduce "2";
listen to the message of the robot and choose a tariff;
the robot will announce the card number, the selected tariff and the phone number for further connection. Additionally, the period will be named, during which you will have to wait for a notice of successful activation of the service.

We offer Download file here:

Instructions for working with mobile bank.pdf (docking: 875)

View online File:

Instructions for working with mobile bank.pdf

Being a customer Sberbank, will not prevent access to

Personal Account

For access to being constant, you need to connect the mobile bank in advance, since the input to the personal account is carried out by SMS confirmation. However, for unite operations, you can use passwords obtained in ATMs.

In the working menu that opens, you need to choose a mobile bank, where it is worth identifying the desired tariff. Then the traditional confirmation of the specified criteria for connecting will follow. It:

plastic card number;
phone number;
name of the selected tariff.

After clicking the "Connect" button, a message should come with a code that should be redirected to Sberbank. If there is a need to change the tariff, it can be done in the same section at any time. The procedure will leave 1 to 3 days. For content

Get SMS code to verify and enter it.

Select the connection of the Sberbank mobile bank on the phone.

Following the prompts, activate the service.

Instructions for Sberbank System online

Instructions for working with the Sberbank service online:

Sberbank Instructions online.pdf (Dropping: 507)

View online File:

Sberbank Operation Instructions online.pdf

You can simply choose time and approach the nearest branch of Sberbank. But before this it is necessary to download a special form (on the Sberbank website) or request it directly in the department. In this form, specify the following information:

name of separation;
your passport data;
number in ten-digit format and mobile operator company;
put a tick in the "Register phone number" item;
specify a plastic card number;
enter the numbers of those cards that will be connected to the same phone as an additional;
choose a tariff;
put the signature and date of application.

The correctly compiled statement will be made only if there is a passport. In this case, you can not show the card, but it is necessary to specify its number.

After activation is performed, you can use the format

USSD requests

and SMS, which will greatly facilitate interaction with the bank.

disable Mobile Bank , you need to send text: blocking services, blockservice, blokirovkauslugi; 04.

It is necessary to understand that the service is not turned off forever, but only temporarily suspend some possibilities. Because if the "Full" tariff was connected, the fee for use will be shown. It turns out that the lock function is suitable in the case when the phone is lost or stolen.

All settings can be activated independently on the feedback command: unlocking services, unblockservice, rasblokirovkauslug or 05. Main, before sending a command, do not forget to clarify the card number by entering the last 4 digits of its number. Each data block is entered through a space.

Change tariff : To do this, it is enough to write a full or economy and send to the number 900.

To connect to the Sberbank mobile bank, you must have a phone number of one of the telecom operators in the Russian Federation. You can unlock SMS service in the Sberbank's personal account online, call from the phone number 900 by visiting one of the offices, independently in the terminal or an ATM. Let's consider all these ways in more detail.

Connecting to a mobile bank through Sberbank online is not available to all users and available under certain conditions. To do this, the activation method will need a computer connected to the Internet and the data for logging into your personal account. You will need to perform the following steps.

On the main page Sberbank Find the button to go to the online bank online and log in to your personal account. If you have not registered yet in the service, it will be necessary to do this now.
After logging in, a message will appear with the proposal to unlock the mobile bank. If this does not happen, then in the menu, find the "Mobile Bank - Connection Details" item. You will see a page with a choice of a tariff package (with detailed conditions can be found here).

After selecting, enter the phone number and bank card. Up to 8 Sberbank cards can be connected to one number, but you can manage finance with short commands only one of them. As a confirmation, I will receive an SMS message to the code that must be entered into the appropriate field.