How to configure wired internet. How to connect a computer (laptop) to a router with a network cable

Today there are two types of Internet connection. The first type is a wired connection that is used to connect a cable called twisted pair. The second type is a Wi-Fi connection that provides an Internet connection due to radio waves. The Wi-Fi connection got widespread in our time. However, wired internet has several advantages relevant in large organizations and offices. At home, too, it makes sense to conduct a wired connection at least one computer. For a sustainable Internet connection and efficient work You must properly configure the parameters of its connection.

Advantages of wired Internet connection

Over the past 15 years, the Internet has rapidly introduced in all areas of our life. It is necessary in the banking sector, trade, production, as well as indispensable for the exchange of information and personal communication. The most common ways to connect to the global network today are a wired connection and Wi-Fi connection.

With a wired connection, an optical cable or twisted pair is used. The first type of cable has a significant advantage, as it provides the speed of information of up to 1 GB per second. In twisted pair, the limit speed reaches 100 MB per second.

The speed of information transmission through the cable depends on its type and from network cardcarrying out the signal. It affects work desktop computers, gaming consoles, TVs and other devices combined into one network. Streaming information does not require constant exchange between devices, which significantly increases the processing speed. The speed in the local connection between workstations has great importance When working in the corporate network. This is taken into account if there is a need for fast transfer large number information.

With Wi-Fi Connection, the Internet connection is carried out using radio waves operating in a specific range. Therefore, Wi-Fi is more in demand on the household level. It is convenient, as it allows you to immediately connect to the Internet from a smartphone, a tablet or a laptop anywhere where there is an access point. However, the reception of the signal is affected by the devices of neighbors running in the strip wi-Fi frequencies- Connections, and items on the path of radio waves.

For a Wi-Fi connection, a cable laying is not needed, but it is strongly exposed to radio interference, and the further you are from the access point, the worse the reception of the signal

Wired connection has several advantages over wireless:

the speed of obtaining and sending information with a wired connection is approximately 2 times higher than that of Wi-Fi;
when sharing files with a server, the delay is minimal, which is important in online games requiring the maximum speed of action from the user;
wired connection is more resistant to interference in the network; It does not affect it the gadgets operating on the Wi-Fi frequency band or close to the sources of electromagnetic radiation;
the power of the signal with a wired connection does not depend on the obstacles to the path and exposure to external factors.

Errors arising when connecting a wired compound can be indicated by codes that indicate the cause of problems.

Video: The wiring Internet connection is better than Wi-Fi

How to connect a cable to a computer or laptop

Connect the Internet cable to the computer's network adapter connector independently even unprepared by the user. A standard cable (twisted pair) is used to connect with roasting RJ-45 connector at both ends of the cable.

Connect the cable as follows:

Prepare the network cable required length.
One connector Connect to any LAN-connector on the router.
To begin with, connect the cable connector to any LAN-connector of the router
Another cable connector is connected to a laptop or computer connector.
Now you need to connect the second cable connector to the LAN-computer connector
When using an old type modem, the incoming cable of the provider is connected to a yellow internet connector on the modem.
In the modems of the old type, the provider cable should be attached to the tight color modem connector
Connecting a LAN cable Connect to any Ethernet modem connector and a network connector of the device.
Connecting cable from the device you need to connect to an Ethernet modem connector
After connecting the computer with the router, the LED indicator lights up the installation between devices.
When connecting to a computer on the router indicator panel, the indicator LED will burn

The cable connection does not represent much difficulty, since all connectors have connections that are suitable only to the corresponding sockets on the computer connector panel. Make an error in this process is extremely difficult even for a novice user.

Dynamic and static Internet connection

After connecting cable connectors and construct the connection between the computer's network adapter and the provider equipment, the Internet connection can be debugging. First of all, it is necessary to choose the method of connecting to the main network, pushing off from specific purposes. There are 2 ways to connect:

a dynamic connection is a method in which an individual IP address assigned to a computer is automatically configured and varies when transforming the initial parameters. The equipment of the provider's company independently assigns the values \u200b\u200bof the network address and the main gateway. During the connection of the computer to the main line, the connection to the global network occurs immediately, without requiring additional entry of the identification data from the user. The only inconvenience with such a connection is a possible representation. remote connection to your address. In this case, you need to pre-join the main line directly, bypassing the router;
a static connection is a connection method when the individual IP address provided to the computer remains constant and designated at the conclusion of the contract with the provider. During such a connection, the user exhibits the address in manual modeAnd also independently prescribes the values \u200b\u200bof the main gateway and DNS servers. If there are no such information in the contract, you can find them in the department technical support Provider companies. Some Internet providers for licensing network may need to enter a username and password. This information is usually indicated in contractual documents or are determined by the subscriber on their own.

How to create a dynamic connection

For proper creation Dynamic connection You must perform a number of consecutive actions:

In the "Start" keys menu, go to the "Network Connections" section
In the "Parameters" section in the "Changing Network Settings" block, select "Setting the adapter parameters".
In "Parameters", go to the option "Setting the adapter parameters"
In the "Network Connections" console, right-click on an Ethernet connection.
In the menu that opens, select "Properties".
In the drop-down Ethernet menu, select "Properties"
In the Connection Console, select the IP version 4 (TCP / IPv4) component and click "Properties".
In the properties panel, it is necessary to highlight the IP version 4 string (TCP / IPv4), after which open the "properties"
In the TCP / IPV4 protocol attribute console, activate the "Get IP Address automatically" switches and "Get the DNS server address automatically".
In the last step, activate the "Get IP Address automatically" switches and "Get the DNS server address automatically"
Click OK to complete.

Now the dynamic connection is ready for use.

How to create a static connection

To create a static connection, you must perform the following steps:

Everything, the static connection is established.

Currently, most home Internet subscribers are applied dynamic connectionSince the main way is to connect through the router. Static connection is applied when modem connection or with direct connection.

When using an ADSL modem connection, only static addresses apply to the Internet provider apply.

Video: Creating a static and dynamic connection

How to configure L2TP connection in Windows 10

The L2TP tunnel protocol used to connect to the global network is the symbiosis of the old PPTP protocols from Microsoft and L2F from Cisco. It is easily processed network devices And has a high information exchange rate due to a reduction in the load on the processor. It has great compound stability and high security. Creates to create tunnels to work in any networks. The L2TP protocol is usually used in corporate networks, as it allows you to create a network connection on top of the existing network. This ensures a steady connection between the main office of the organization and regional offices.

To configure the L2TP connection, you need to perform a series of consecutive actions:

Right-click on the Start icon.
In the menu that appears, click on the "Network Connections" string.
In the Start menu, select the "Network Connections" string
In the "Parameters" section, select "Network Management Center and common access».
In the "Parameters" section, open the "Network and Common Access Control Center"
Here, select the "Creating a New Connection or Network" option.
In the "Network and Shared Access Control Center" section, you must select the first item - "Creating a new connection or network"
In the "Connection or Network Setup" panel, highlight the "Connection to Workplace" string and click "Next".
Highlight the "Connection to Workplace" string, then click "Next"
In the "Connection to the Desktop" console, select the "Use My Internet Connection" tab (VPN) tab.
Click on the "Use My Internet Connection (VPN" tab to continue setting
In the opening console, enter the address of the server, check the box next to the "Allow this connection to other users" option and click Create.
Enter the server address and do not forget to check the last item to allow you to connect to other users.
In the operating console, enter the username and password, then connect to main network.
Go to "Network Connections".
Right-click on the generated VPN connection.
In the open menu, select "Properties".
In the console, click on the generated VPN connection with the right mouse button and go to Properties
In the Console tabs "VPN-connection: Properties", open the Safety parameter.
In the VPN Type field, set the L2TP value from IPsec (L2TP / IPsec), and in the "Data Encryption" field, select "Optional". After that, open "Advanced Parameters".
The VPN type must be set as L2TP with IPsec (L2TP / IPSec), to encrypt data to select "optional"
Enter the key provided by the provider to authenticate.
The key to authentication must be provided to you by the provider.
Click OK to complete.

If you did everything correctly, the L2TP connection is ready for use.

Video: How to configure L2TP connection in Windows 10

Created L2TP connection increases the security level for the subscriber and makes more simple connection With the equipment of the provider.

How to configure PPPOE connection in Windows 10

Protocol network connection The Internet PPPOE is used when connected to the main network using Ethernet technology. This method has several advantages, such as advanced spectrum additional features, compressing information when transferring, carrying out authentication and encryption operations with information packages. Connection requires authorization on the network (input username and password). Used when directly connected to the main network and the equipment of the provider.

To connect to the Internet using the PPPoE protocol, you must perform a number of operations:

Open the "Network and Shared Access Control Center".
Here, select "Creating and Configuring a New Connection or Network".
In the "Network and Shared Access Control Center" section, click on "Creating and Configuring a New Connection or Network"
In the Console "Connection or Network" console, highlight the "Internet connection" item and click Next.
Select the first item - "Internet connection" and click "Next" for further settings
Select the High Speed \u200b\u200btab (with PPPOE) tab.
In the "Connection to the Internet", select the connection "High Speed \u200b\u200b(with PPPoE)"
Next, enter the login and password received from the provider and click "Connect".
Enter the login and password received from the provider, and click "Connect" to complete the setting

You now have a PPPoE connection.

Video: How to connect and configure PPPoE connection

To give permission to other users to use the connection is only when installing the home Internet, since the number of users is limited.

Wire Internet Connection Problems

When connecting a wired Internet, errors associated with equipment fails, a cliff of the main network or incorrect user actions occur. In most cases, the connection problems occur due to careless actions of the user itself.. To determine and eliminate the cause of the problem, you need to perform simple actions according to the following algorithm:

Run the "Network and Common Access Control Center".
In the "Network Connections" tab, select Troubleshooting.
Go to the "Network and Shared Access Center" and open the Troubleshooting section.
Select "Internet connections".
For further settings, select the "Internet connection" option
Next, click on the "Run troubleshooting tool" string.
Wait for problem detection process
After the process is completed in the window that appears, select the "Troubleshooting Connection Tools" tab.
Select "Troubleshooting Internet Connection Troubleshooting" and expect to complete the diagnostic process
At the end of the problem search process, close the console, if the malfunctions are not detected. If malfunctions are detected, follow further instructions in pop-up windows.

Run the troubleshooting agent by clicking on the appropriate line

After the verification process is completed in the Inbox Console, select "Find this computer on the network" and click "Next".
Mark the item "Find this computer on the network" and continue troubleshooting using the "Next" button
The troubleshooting tool will check if the firewall does not block this computer on the network.
Expect the end of the network gateway configuration check
During the troubleshooting process, follow the instructions that appear on the console.
If problems are not detected, close the console.
If problems are detected, then for their elimination, follow the instructions of the program.

On this, the check of incoming connections is completed.

The instruction shows the detection of one problem. incoming connection. You can see more details with the problem by clicking on the "View Additional Information" string.

The presented method for finding connection errors is classic and developed by Microsoft Corporation. In reality, everything is much easier, since the problem with connecting the Internet can be caused by other reasons that are eliminated by a mechanical manner.

This algorithm helps to eliminate the problem with the lack of an Internet connection in most cases:

Restart the computer.
Disconnect the router from the network and wait 10-15 seconds.
Turn on the router.
If the connection is not restored, press the RESET button to restart the router.

To avoid problems with connecting to the Internet, it is recommended to periodically turn off the router from the network and give it time to restore.

Video: Entry when connecting wired internet

Currently, all Internet providers prefer to establish a dynamic connection to the main network. This is more convenient for the network subscriber and the provider's company, since it does not require reconfiguration of the parameters with any changes in the network equipment. If you plan to often use remote access to your computer, it is definitely better to choose a direct connection, bypassing the router or modem. For home Internet, you can always change the router settings and the connection type set by initially specialists by the provider. In the future, when changing the system configuration or complete reinstallation, the network parameters are set automatically. With direct configuration, you will need to set in manual mode. All this must be taken into account users when choosing a type of Internet connection.

Today, perhaps, it is impossible to find a socially active young resident of the city, which would not have access to the global network. Recently, there has been active dominance wireless communication Wi-Fi, but if you prefer an old-good wired Internet, it will not be difficult to connect it.

Connection

To connect to the network, you must first select the most suitable operator.
Criteria for selecting an operator service provider:

availability of access points not far from your home;
acceptable connection cost;
high communication speed at an affordable price;
efficiency of technical support;
other factors (discounts, bonuses, special offers etc.).

Many people as a service provider (provider) choose Beeline. Connect wired Internet to a laptop Master of technical support can after you leave an application in the telephone mode, on the site or in the office of the provider.

In each laptop on the side, behind or in front there is a special slot (hole) for a network cable. Network card, as a rule, is already mounted in the device. A cable is inserted into the slot, which leads to a distributing device, or a switch located in the entrance, in the attic of the house or in a nearby house. Usually several cables for different subscribers depart from the switch. This creates local computer networkproviding Internet access on all laptops connected to it.

Setting

But to connect the Internet to the laptop is not enough to use the unlimited benefits of the "World Wide Web". After you place the cable in the slot, you need to configure. And if the first action cannot be performed independently, even a beginner user can cope with the second easily.

Consider the basic principles on the example of Internet configuration Beeline on a computer with the Windows7 operating system.
Procedure:

click the Start button and go to the Control Panel. In the window that appears, select "Network and Internet", then click on the "Network and Shared Access Center".

Select "Setting up a new connection or network" item.

Click "Connecting to Workstation", and then - "Next".

Select "Use My Internet Connection (VPN)"

In a place where you need to enter an Internet address, write tp.internet.beeline.ru, and where you need to enter the name of the location - Beeline. Then you need to set a tick opposite the words "not to connect now, just perform installation for connecting in the future" and click on "Next".

Next, enter your username and come up with a password that you will enter to connect to the network.
When the process is completed, click the Close button and return to the Network Management Center and Common Access. There click on the item on the left side of the "Changing Adapter Settings" screen.

On the created Beeline connection, right-click, go to "Properties" and make sure that the VPN server address is written to TP.internet.beeline.ru.
After that, bend to the "Parameters" and remove the checkbox in front of the "Enable login domain" item.

Go to the Safety tab and open the floating list of VPN type. Select L2TP IPSEC VPN in it. Stop the check mark in front of the CHAP password checkpoint and click "OK".

To access the network, click on the Beeline Connection Label and enter login with password.

As you can see, set up Internet Beeline on the computer is not so difficult, so you are provided with a real chance to save own funds and get new knowledge. Connect wired Internet can only master technical support, which has access to distributing equipment, so do not try to do it yourself.

According to statistics, almost every user of modern computer systems at least once in his life came across the question of how to set up the Internet on the computer. Not surprisingly, because lately The World Wide Web won crazy popularity and became available absolutely to everyone who has a computer, laptop or mobile gadget. Despite the full automation of the process, not everyone knows how to configure the Internet connection.

Basics of connecting to networks and the Internet

The first rule: it is necessary to clearly understand that in some cases it will have to be used automatic connection, and manual mode. In addition, two main conditions must be met here: the availability of the provider and the relevant equipment (network cards, ADSL modems, routers, routers, etc.)

But now we will talk about how to configure the Internet on a computer with wired connection, since private virtual networks (VPN) are in most cases computers, laptops or mobile devices Determined automatically and for the input require a maximum of login and password (provided, of course, that the same router is already configured).

What is TCP / IP protocol?

In operating rooms windows systems Connecting to networks and the Internet is carried out using the TCP / IP protocol system that is responsible for correct transmission and receiving data. In fact, it is not even one, but several protocols. This group includes connections via UDP, FTP, SMTP, ICMP, Telnet, etc.

If we talk about how to configure the Internet on your computer without going into technical details, it can be noted that the TCP / IP protocol set is associated with a kind of bridge between computers located on the network with unified system Authentication and transmission of byte data streams divided at the beginning and united at the end of the route. It does not matter what operating systems are installed on terminals connected to each other. This is what makes the TCP / IP system not only the most popular tool for connecting to networks and the Internet, but also just a versatile agent.

Network cards and their properties

One of the main conditions is the presence of a network card in a computer terminal, which includes a cable. Today, fiber-optic lines received the greatest distribution.

To understand how to configure the Internet on Windows, you must first decide on the characteristics of the network card itself. From its basic characteristics and parameters and the connection speed will depend. The easiest example: The dedicated line supports the connection with the data transfer rate of the order of 100 Mbps, and the card is not. In this case, the speed to the stated from the provider does not have to have to. It is clear that more than its nominal network card to convey and accept will not be able.

To view all its characteristics, you need to enter the control panel and select the Device Manager section, to find the network card installed in the system and call the option "Properties" by right click. On the "General" depository field and all indicators will be visible.

Internet connection methods

The most common Internet connection methods are highlighted lines, using DSL broadband lines, connection via local networks, connection through satellite communications, Using TV network channels and switched access. The latter, however, has already been taught.

In any case, the question of how to configure the Internet connection, each time the connection has two standard solutions.

Automatic Internet connection

Provided that account The provider is already provided, you need to attach the network cable to the network card connector denoted by the LAN (if necessary, then to the modem or router connector).

In the "Control Panel" you need to select "Network Connections" (for Windows 7 "Network Management Center and Sharing"), use the "Creating a New Connection" command ("Setting up a new connection or network" for Windows 7), followed To the "Connection to the Internet" section. Next, it remains only to follow the instructions of the "Master". At the end of the process (after rebooting the computer terminal) you can work.

Connect to wired internet in manual mode

As for how to configure the Internet on the computer in manual mode, you first need to make the actions described above, and then use the data provided by the provider.

When automatic setting You do not have to enter data manually. As a rule, on the TCP / IP properties tab of the IP address parameters, subnet masks, the main gateway, preferred and alternative DNS server will be inactive, since two commands are specified in the settings: "Get an IP address automatically" and "Get the address DNS- Servers automatically. " This, naturally, eliminates the user from prescribing addresses manually. If you dig deeper, then the "Advanced" tab does not have to specify the WINS servers addresses, proxy servers (if any), and even configure an alternative configuration.

However, it often happens that receipt automatic addresses Either it is impossible, or does not work. This is where the main problems begin.

As a rule, all values \u200b\u200bspecified in the protocol properties tab are unified. For example, an IP address is assigned to 192.168.0.1, a subnet mask - 255.255.255.0, the main gateway and the DNS server - 192.168.1.1. In some embodiments, when creating a connection, the address parameters of the gateway and the DNS server coincide with the current IP address (192.168.0.1). By the way, in most cases, WINS addresses or proxy servers are not needed.

How to set up the Internet? Windows XP.

To configure Internet connection in the "Operation" Windows XP you need to use standard method: In the "Control Panel" to use the Network Connections command and the "Properties" tab, find the TCP / IP protocol string, and then give preference to one of the proposed options for automatic receiving addresses or instructions in manual mode, having previously going to the tab "Properties" (for PCP / IP).

How to set up the Internet? Windows 7.

Creating a connection to the Internet in Windows 7 has no fundamental differences. The only difference is that some components have a different name, and TCP / IPv4 (fourth version) is used as a protocol.

To configure the connection, use the "Control Panel", click on the line (or on the icon) "Network and Shared Access Center", then apply the "Configure New Connection or Network" option. Then it remains only to select the desired type of connection. After the connection is activated, it will be possible to view all the data, and if necessary, change them using for this tab "Network connection / Property / Network / Protocol version 4 (PCP / IPv4)", where all addresses will be shown. If such is provided by the provider automatically, the fields for filling will be inactive.

Other Internet Connection Methods

In principle, there is another option how to configure a computer via the Internet. True, for an ordinary user, this procedure may seem sufficiently difficult, especially since in this case you need to have a remote connection to the computer terminal, which is supposed to configure access to the network or to the World Wide Web.

To do this, you can use the built-in standard means All versions of Windows Operations, located in the Start menu, section "Programs". Here there is a folder "Standard", in which the "Connection to the Remote Desktop" command is located (for Windows 7). In other versions operating systems Names can change. For creating remote access You can apply software packages and applications from other manufacturers and developers, but, as practice shows, the easiest way to create a manually connected to local computer with direct access.

In total there are only two options for connecting to your global network laptop: wireless method and via network cable. Moreover, one procedure is very different from the other on the basis of the OS version. Now we learn how to connect wired Internet to a laptop.

Getting set to configuration

Before you start setting, you need to obligatory Make sure that the network cable has been connected to the computer, the network card has everything required driversAnd the Internet provider began to provide the Internet service.

Using the example of one of the most popular Windows operating systems 7, the principle of connecting to the Internet will be considered. So, in order to become a participant in the Global Web, you must do the following:

The user must get to the "Control Panel". This transition can be performed from the Start menu.

We find the item that is responsible for the global network and enter it. Even on different versions of operating systems, this item looks approximately the same.

In this point, go to the Center for Network and Common Access Center, where basic manipulations will occur.

In the menu that appears, you must open the "Changing Network Parameters". This item is responsible for network settings and Internet settings.

Now go to the setting itself. To connect to the Internet, you must select the appropriate option.

For wired connection, you must select a high-speed Internet connection method.

The user opens the page where you need to enter individual information for each user. These data can only be obtained by contacting your Internet provider, which must send the user to the user to access and login that is needed to connect to the Internet. After the Internet provider provided all the necessary data, the user can enter them into the appropriate fields. Now you need to try to connect to the Internet by clicking on the "Connect" button.

Thus, the wired Internet will be configured on your computer. As for other operating systems, the setup method is almost identical to these two, the difference can only be in some names of certain tabs, but to choose the necessary one, intuitively and will not be difficult.

2 666

Do you already have a laptop or are you just going to buy it? Then it is advisable to think about connecting to the Internet, otherwise it will not be possible to fully use technique. Download programs, updates, antivirus bases, as well as films and music without it is impossible. There are a lot of ways to connect to the global network. Wired and wireless access is possible. Some of them do not require costs, while others force to buy auxiliary equipment. Consider how to connect a laptop to the Internet by all existing ways.

Modern laptop and global network is a single whole

Wired connection

Wired access is considered the most reliable and stable, with the most low-cost. It is enough to plunge the cable in the connector on the laptop and make uncomplicated settings. Several technologies are used: optical cable and ADSL, functioning through the phone.

Cable

There are also several types of Internet connections. Each of them is slightly characterized by settings.

Dynamic and static IP address

With a static IP, you need to enter an IP address, as well as an subnet mask, gateway and DNS server in the network card settings manually. With dynamic IP, all data is assigned to the operator, and you do not need to make additional settings.

At the bottom of the screen when the cable is connected, a yellow sign should fit. Right-click and go to the Network Management Center - Changing the Adapter Parameters. You will see an Ethernet inscription icon or The local network. On the Dual Click icon - Internet version 4 - properties.

If the operator provides a dynamic address, specify the automatic receipt of IP and DNS. When Static - Enter all the data specified in the contract. Click OK. Now the Internet will work, and yellow exclamation point disappear.

At the same time, the type you need to know only the login and password. In the Network Management Center, click on the creation and configuration of the new connection - the Internet connection is high-speed (with PPPoE). Print the username and password from the service contract and come up with the name. If you enter all the data correctly, after a couple of seconds the connection will be installed.

In the subsequent connection, click at the bottom of the screen on the network icon and click "High Speed \u200b\u200bConnection". When using Windows 10, you will redirect you in the dial menu where you can connect, change or delete the connection.

VPN on L2TP / PPTP

Some providers, such as Beeline, connect their subscribers using VPN technology using the L2TP standard or PPTP. In the New Connection Creation menu, select the connection to the workplace - use my internet connection - Internet address, enter data from the contract. Come up with the name, for example, the name of the provider, and click "Create".

Now go to the menu of changes in the parameters of the adapter. Right-click on the name of your connection (the adapter will be called Wan Miniport) - Properties - in VPN Type, select the parameters recommended by the provider. Connect from the network menu by clicking on the name. If you have Windows 10, you will redirect you in the Connection menu.

ADSL modem

ADSL access is not as popular. The signal comes from the telephone line, while the phone itself continues to work as usual. Connect the phone and the modem to the splitter, which distributes the signal from the line, the second connector modem is to the laptop, then configure the connection on the computer. The procedure does not differ from the cable Internet.

The service provider will indicate which connection it provides wired Internet. Most often it is a static IP or PPPoE. Use the previous item to configure the modem.

Wireless connection

To get wireless access, you need to purchase a Wi-Fi router. Connect it into the outlet, the Internet cable is stored in the reserved connector (it is always different in color). Next, enter the settings interface for wireless wi-Fi network or through the cable. Information about the input parameters is indicated on the router itself or in the manual for it. Enter the IP address, login and password.

When you first connect, you will be offered fast setting. Select your city and the name of the provider and enter the connection data. If there is no connection in your provider, check the connection type from it, select it in the network settings, enter the data, save and connect.

On the laptop, check the presence of drivers on the Wi-Fi wireless module. This can be done through the device manager. If the module works correctly, its name will be displayed completely. If the drivers are missing or installed incorrectly, near the name " Wireless adapter"Will stand yellow exclamation mark. You will need to download the driver on the Wi-Fi wireless module from the laptop manufacturer.

The Wi-Fi adapter must be turned on, it can be activated by the FN + F1-F12 key combination. More information can be found from the instructions for a laptop. In the right corner of the bottom of the screen you will see the Internet icon in the form of an antenna with yellow asterisk. Click on it, select your available connections. wireless network, Enter the password and click Connect.

mobile connection

When you do not have the ability to connect stationary Internet, you can use the offer mobile operators. The quality of these services at a high level. In many cities, the speed of access is equal to home internet. You can connect through a 3G modem, a mobile 3G router, as well as use the phone as a point of access.

3G modem

It seems to resemble a flash drive into which the SIM card is inserted. When you first connect, the system starts the program to configure the connection. If you have purchased a modem in the official communication salon of operators, it will have a corporate view and settings for working on the network of this company. For the rarest exception, it is not necessary to manually prescribe settings. You will need to choose a tariff, using the Activate SIM card and balance on it and connect. Subsequently, it will be enough to insert a modem in a laptop and click the "Connect" button in the program menu.

3G router

According to the functionality, this is an ordinary router, only instead of the cable is inserted into it. Considering that most models have a built-in battery, you can hand out mobile Internet Through Wi-Fi, without being tied to the network cord. By inserting a SIM card, conduct the procedure for setting up as a regular router via a web interface.

Phone as an access point

Another simple option is to use the phone on Android or iOS as a modem. It is enough to activate the item in the menu. You can read more about this method in our article "How to connect the tablet to the Internet". However, it should be noted that the phone's battery is very fast. Therefore, it is desirable to connect it to a power source or connect via USB.

Conclusion

Now you are familiar with all the ways of connecting the Internet on your laptop. To establish it on the cable, via Wi-Fi or modem is completely simple. All service providers try to make it easier to make life easier as possible to their users. Even if something does not work, you can call technical support.

What technology are you connected to the Internet you? Share your experience in the comments.