Setting up switching to full screen in Photoshop. Screen Display Modes in Photoshop

Changing image display mode on the screen

Click on the button Standard Screen Mode. (Standard screen) located in the lower left corner of the toolbar (Fig. 3.38), or press the F key so that the image is present on the screen, the menu panel, palettes and scroll bar. This is the usual mode of operation. photoshop programs.

If you click on the button Full Screen Mode with Menu Bar (Full-screen mode with the menu panel) or press the F key, the image will be shown in full screen without scroll bars, but the menu panel and palette remains (Fig. 3.39). The area around the image will be gray. it good way See the image in all his brilliance.

After clicking on the button Full Screen Mode. (Full-screen mode) In the lower right corner of the toolbar or pressing the F key (Fig. 3.38), the image will be shown in full screen, the palettes will be visible, but there will be no menu panel and scroll barns. The area around the image will be bright black.

Note

Press the key Tab, To show / hide the toolbar and any open palette. Or click the key combination SHIFT + TAB, To show / hide only palettes, while leaving an open toolbar.

Note

Using tools Hand (Hand), which is activated by pressing H, or palette keys Navigator (Navigation) You can move the enlarged image if the scroll bars are hidden. Press and hold the gap key to use the tool Hand (Hand) While another tool is activated.

Fig. 3.38. Display mode buttons on toolbar

Fig. 3.39. Full screen mode with menu panel

At the moment the interface does not block my image, but this is just because the scale of the picture is reduced. To get a more complete picture of the benefits of selecting suitable screen modes, I will press Ctrl + 1 combination for a quick transition of my image on the scale of 100%. With a 100% scale, the image has become too large to fit completely on the screen, and now the interface elements cause problems by blocking an overview of the part of the picture, this may especially cause problems from small monitors with a small resolution:

Full screen with the main menu

If you want to increase a little workspaceto get a little more space for work, you can switch to the second of the three screen modes Photoshop, known as "Full screen with the main menu" Full Screen Mode with Menu Bar). In Photoshop there are several different ways Its inclusions. First, you can go over the Main menu tab View -\u003e Screen Modes -\u003e Full Screen with Main Menu (View -\u003e Screen Mode -\u003e Full Screen Mode with Menu Bar).

However, there is much more fast way To switch between Photoshop screen modes, it is necessary to press and hold on the icon at the bottom of the toolbar, the drop-down menu will appear where you can select "Full Screen with Main menu" (Full Screen Mode with Menu Bar):

Full screen with the main menu Hides all the interface elements that were part of the window of the document itself, for example, a label with the name at the top, click the button, deploy and close the document window, scroll bars along the right and lower edge of the image, the level of scaling and other information that is in the left lower right The corner of the document window. In addition, if you had several images in certain tabs of documents, only the active document remains visible, the rest are hidden. All other interface elements (toolbar on the left, the panel group on the right and the main menu from above) remain.
In addition, this mode hides the Windows Taskbar located usually downstairs. Here is a screenshot of my monitor completely:

Full screen

To maximize your workplace from the interface elements, switch to the last of the three Photoshop screen modes, just known as Full screen Full Screen Mode). You can choose it either through the Main menu tab -\u003e Screen Modes -\u003e Full Screen (View -\u003e Screen Mode -\u003e Full Screen Mode), or simply press and hold on the screen mode switch icon at the bottom of the panel Tools and select "Full Screen Mode" from the drop-down menu items:

If you select this mode for the first time, I will first appear the information window with a warning. Put the checkbox in checkbox "Do not show again" (don "t show Again):

In full-screen mode, the entire interface, as well as the panel, setting Windows is completely hidden, leaving only the image itself, so the entire monitor turns into your workspace:

Access to the hidden side panels when "full screen" mode

If this mode is selected, the user has a question: "How will I work with the image, if all controls are hidden?".
Photoshop is thought out and this. You can temporarily or constantly display the panels with hot keys, but about it after, in the meantime I will tell you about a very simple and beautiful way to temporarily display panels.

In order to temporarily display the toolbar on the left or right group of panels. You only need to bring the cursor to the left or right edge of the monitor, respectively! After you choose the desired tool, move the cursor from the edge and the panel will again disappear:

Display and hiding the interface with hot keys

In the "Full screen" mode, you can temporarily show and hide the entire interface directly from the keyboard by pressing the Tab key.

In addition, the right group of panels can be shifted / hide by pressing the Shift + Tab keys.

Note. Pressing and hiding all pHOTOSHOP interface Using the Tab and Shift + Tab keys works for all three screen modes.

Switching screen modes using hot keys

Above, I told how to switch the screen modes using the PhotoShop interface (from the main menu and button in the toolbar).

But the fastest way to switch between screen modes is simply pressing on the keyboard key F. Pressing F switches the modes sequentially, each other, with the "standard" on "full screen with the main menu", then on "full screen", then Again "Standard!, etc.
If you want to switch modes in the reverse order, press SHIFT + F.

To quickly exit the "Full screen" mode and switch it to "Standard", press the ESC key.

Sometimes when working in Photoshop shortage free space On the image processing screen, it may be for you a real problem, especially if you do not part of the lucky ones having a monitor with double screen. All sorts of tools, menu windows, parameters, panels that make up the program interface can strongly clog the screen and significantly limit the place available to work with the images. Add to this the constantly increasing image size as the digital technologies develop, and you will understand how important it becomes how it becomes how to increase the workspace on the screen to the maximum.

Fortunately, when working with photoshop, it is easy to overcome the problem of lack of work space, due to the presence of various screen display modes. The on-screen display mode determines which part of the interface should be displayed on the screen, and varies from the standard mode, which displays the entire interface, until a full-screen mode, which shows only the image itself. In this lesson, we will consider in detail three screen display modes and methods of switching between them. I will also show you some useful key combinations for working with screen modes. I will use the version of Photoshop CS6, but this lesson is also suitable for the version of Photoshop CC.

Screen display modes

1. Standard Screen Mode (Standard Screen Mode)

Below is an image opened on the screen at the moment (a photo of a woman in a mask from photobank Shutterstock):

Standard Mode of Screen Display in Photoshop

This image is open with me in standard screen mode, installed program default. This mode displays the entire program interface, including the toolbar on the left, control panel on the right, the menu bar at the top, various parameters, scroll bar and other information about the document window. Since the standard screen mode provides us with quick and easy access to all necessary items, it also takes the largest area on the screen.

Perhaps now we can not see how the interface may make it difficult to work with the image, because currently I have the "Show full screen" parameter (Fit On Screen), which means placing the image on the screen so that it can be completely visible. To get a visual idea of \u200b\u200bthe benefits of various screen modes, I will press Ctrl + 1 / Command + 1 keys to quickly transition to 100% image scale (all about changing the image size in Photoshop You can read in our scaling basics and "Tips" And hotkeys for scaling ").

With a 100% scale, the snapshot is too big and completely placed on the screen. In this case, the display of the entire interface can be a problem for us, since the image viewing area is blocked by all sorts of panels, especially if we work on small monitors with a low resolution:

With an increase in the snapshot, the display of the entire interface can be an interference for us.

2. Full screen mode with the menu panel(Full Screen Mode with Menu Bar)

If you want to increase the size of the workspace, you can switch to the second of the three screen modes, which is called "full-screen mode with the menu panel". This can be done in several ways. First, you can choose the "View" section in the menu bar at the top of the screen, then the "screen mode" and "full screen mode with the menu panel" (View\u003e Screen Mode\u003e Full Screen Mode with Menu Bar):

Select "View\u003e Screen Mode\u003eFullscreen mode with the menu panel »

A faster method of switching between screen modes in Photoshop is to click on the display mode icon on the bottom of the toolbar and hold the icon pressed for a while, resulting in a pop-up window with three screen modes. From the list that appears, you must select "Fullscreen Mode with the Menu Panel":

Click on the screen mode shift icon, holding the button, and select from the "Fullscreen Mode with the Menu panel" from the list

When you select a full-screen mode with the menu panel All interface elements that were part of the document itself become hidden: the document name is at the top, "Collapse" buttons, deploy "and" close ", scroll strips on the right and below, scale button and other information related to The document itself, usually located in the left lower area of \u200b\u200bthe window. Also, if you have several images in separate windows, only the selected document remains. In this case, all other interface elements (toolbar on the left, control panel on the right, the menu bar at the top) we continue to see on the screen:

Full screen mode with the menu panel Increases the size of the workspace, while maintaining the individual interface elements visible

3. Full screen display mode (Full Screen Mode)

In order to maximize the size of the workspace, switch to the third mode of the screen display, which is called simply "full-screen mode". You can choose it, or by clicking on the "View" section in the menu bar at the top of the screen, hereinafter - "Screen Mode" and "Full Screen Mode" (View\u003e Screen Mode\u003e Full Screen Mode), or simply clicking and holding the mode shift icon The screen at the bottom of the toolbar and selecting the "Fullscreen Mode" from the list appeared:

Click on the screen mode icon by holding the button, and select the "Fullscreen Mode" from the list

When choosing a full-screen mode for the first time, a dialog box appears in the program, where it will be briefly described how it works this mode. If you do not want to see this message every time you switch to full screen mode, check the checkbox in the "Don't Show Again" dialog box and then click on the "Fullscreen Mode" button:

The program warns you in advance that full-screen mode differs from the current mode currently

When a full-screen mode is selected, the entire interface becomes invisible, with the exception of the image itself, and the screen turns into the workspace:

It seems incredible, but the image is still open in the photoshop program. Fullscreen mode hides the entire interface.

Working with interface

1. Working with interface panels on the edges of the screen

Perhaps you will think: "All this, of course, is wonderful, but how should I work with an interface that is not visible?" On the one hand, you can always rely on the key combinations and use them, provided that you remember the desired combination on the keyboard. But in reality, you do not need to be a "outstanding user" to work with a full-screen mode. There is an easy way if necessary to make an interface visible. To temporarily return the toolbar and select the desired tool in full screen mode, simply move the mouse cursor to the left edge of the screen. Once you choose the desired tool, remove the mouse cursor from the edge and the toolbar will disappear:

In full screen mode To view the toolbar, move the mouse cursor to the left edge.

To view the panels, which in normal mode are located on the screen on the right, move the mouse cursor to the right edge of the screen. After working with the panels, remove the mouse cursor from the edge, and the panels will disappear:

In full screen mode To view the panels, move the mouse cursor to the right edge

2. Display and hide interface panels from keyboard

You can also temporarily hide and display panels by pressing certain key combinations, and this applies not only to the full screen mode. These key combinations operate in any of their three screen display modes and make it possible to increase the workspace if necessary. In any screen mode, press the tab key (Tab) to hide or display the toolbar on the left, the menu bar at the top and panel on the right. In my case, I pressed the key, being in full screen mode, but you can also try to apply the key and in standard mode, and in full screen mode with the menu panel:

Press the tab in full screen to display the toolbar, the menu bar and panels located on the right side of the screen.

In order to display and hide the panels, located only on the right side of the screen, press the SHIFT + TAB key combination. And again, I use this combination for a full-screen mode, but also this combination works in the other screen modes:

Click in full-screen key combinationSHIFT +.Tab to display panels located on the right

We looked at how you can switch between screen modes using the menu bar with the "View" section and the screen mode icon on the toolbar. But the fastest method of switching is pressing the F key on the keyboard. By pressing the F key several times, you will switch from the standard screen mode to full screen mode with the menu panel, then on the full screen mode and back to the standard one.

If you want to switch modes in the reverse order, press the SHIFT + F key combination. In conclusion, in full-screen mode, you can press the ESC key to exit the mode and return to the standard screen display mode (pressing the F key will result in the same result).

And so we did it! We looked at how you can clear the screen in Photoshop and increase the size of the workspace, using different screen modes and useful key combinations! To further explore the program, visit our section "Fundamentals Photoshop" or go to the lessons that you may interest!

Transfer: Ksenia Rudenko

Photoshop. In it, I spent very little about the button - change screen modes. Therefore, I repeat what was, but I will do it as much as possible.

So, Photoshop, as I said, includes three different screen modes. This is done for the convenience of viewing documents. By clicking on the appropriate button, this menu will open:

Depending on what you do, one is suitable for you better than the other. For example, you can make it so that the image takes the full screen (displaying or removing control Panel and parameter panel), You can hide the palette, etc.

Switch between modes Easy - Press the F key (but only first make sure that you are not activated, otherwise you will print the letter), or use drop-down list screen modesI noted the yellow arrow on the screenshot above.

Now more about each screen mode

Standard window - This is a viewing mode that you see when you first start photoshop. It displays all possible program panels: control panel, and. In addition, you see the elements of your operating system, namely: Close and fold buttons and minimize in the upper right corner, as well as the taskbar below.

Click to enlarge

- It takes the full screen. In this case, elements of the operating system and the status bar disappear. Open at the moment, the document is placed in the center of the screen on a gray background, and the open panels and palettes are located on the left and right edges of the monitor.

Click to enlarge

It is ideal for everyday work, because you can see all your tools and menus and not be distracted by files and folders on the taskbar. Gray background also does not tires the eyes and is very convenient when correction of color images (a bright background can affect the color perception).

- hides everything that you can. The document is located in the center on a black background.

Click to enlarge

It is ideal for viewing and reviewing work done or to work on an image without distraction to controls.

You can free the screen space, the panel and palette palette with pressing the TAB key (on the keyboard it is from the left edge and looks like two arrows directed in different directions).

This is a great way to get rid of distracting elements during editing, special if you have a small monitor.

To return everything back - click on it.

Noticed the error in the text - select it and press Ctrl + Enter. Thank you!

Operational windows system - A complex multi-way structure, about all the options of which are not all "advanced" PC users and laptops. These are all sorts of "Easter", jokes from the creators and, of course, hotkeys. The latter is probably the most useful and the most mysterious. Even programmers do not know all key combinations, with which you can manage the entire operating system without mouse. However, in order to learn all the combinations, you need to train more than one month, because there are a lot of them. It is worth noting that it is a long and difficult thing. Not everyone has enough patience to learn all the keys. Therefore, O. hidden opportunities This operating system is known for a very limited circle of the most stubborn.

We will look at the most useful key combinations that can be useful in everyday life. Having learned them, you can hit your speed of work even "experienced" programmers.

Why do you need to know this?

First of all, you need it yourself. These knowledge will expand the horizons and help work on a computer faster and more productive. After all, many key combinations lead to functions that are deeply damaged in the depths of the "control panel". Search for them and click the mouse much longer than clamping a pair of keys. By the way, the key in Windows is also there. And we will talk about it, since this question is very interested in many users. It will not pass the month how you will feel that you can manage a PC or a laptop with hot keys much more convenient than the mouse. It is for this that you need to know their combinations.

Opinion "specialists" about hot keys

Many computer "Guru" and pseudo-programmers deny the effectiveness of such a method of managing the operating system. But this is only due to the fact that they are terribly afraid to admit their incompetence in this matter. However, one who professionally engages in photographs in adobe program Photoshop, will not underestimate the efficiency of hot keys, for they increase productivity and speed up the work.

Do not forget about those who love games. For them to play in the window mode - solid flour. Therefore, it is vital to learn key combinations that allow you to enable full-screen mode in the game without unnecessary "problems". However, most advanced users simply ignore the hotkeys of the operating system and programs, considering them a useless addition. They are fundamentally wrong. Study them stands. And so we will now go.

Full-screen mode keys in various applications

For each program there are hot keys. Including the combination of the input keys to the full screen mode. Do I need to say that some programs do not support this very mode. For example, such utilities like Microsoft Office.. They simply do not need this mode. In the Daum PotPlayer player, the Full-screen mode is Enter. In the browser - the ALT buttons plus F12. But not all applications have similar parameters. Therefore, you should study the documentation for a program or another. They will show how to make full-screen mode keys.

It is worth noting that in some programs you can assign the necessary combination to this or that action. These utilities include audio and video players, graphic editor, file managers, specialized and video and some other products. It is very convenient. Therefore, developers and provided users with such an opportunity. For what honor and praise.

Fullscreen mode in games

Here hot keys full screen mode will not help. We will have to go to the graphics settings and there to mark the corresponding item. Everything is a little difficult here, because in various games settings are in different places. Therefore, here you have to just look. However, the overwhelming majority of the games have a completely adequate Russian translation, so there should be no problems with this. Nevertheless, some novice users can not even cope with such a task. Then you should try simply deploy the game window to the entire screen. First of all, enough. How to make a transition to full screen mode? The alt key combination plus F2 will deploy the window to the full screen. But this is not a one hundred percent full-screen mode.

Fullscreen mode in Photoshop

This software product intended for professional photo processing has many interesting "chips". Including full-screen mode. Keys in "Windows 8" (and in any other OS) - SHIFT Plus F. This will deploy the program to the full screen with the bar menu on which the necessary tools will be located. However, the possibilities of this software product are very limited in this mode. In order to exit the full-screen mode, it will be enough to click on the ESC button. In general, the key combinations in the "Photoshop" could be written separate item. But it is now in our plans.

When working in "Photoshop" without hot keys nowhere. It is perfectly known to all professionals working in this area. Keyboard shortcuts significantly increase the performance. Indeed, it's easier to click on the combination of Ctrl-Alt-Z in order to roll back the changes made than to search the "Back" tool. Other combinations are also effective. Although those who specifically studied work techniques in "Photoshop", and without well know about the wonderful properties of hot keys.

Fullscreen mode in Google Chrome browser

This Internet browser is considered one of the best in terms of speed and performance. It uses millions of people. Therefore, there is nothing surprising in a huge number of requests on the topic, how to make full-screen mode keys in "Chrome". People can be understood. Constantly climb into the browser settings in order to simply switch the view - solid torment. So, in order to deploy "chrome" to the entire screen, it is enough to press the F11 button. Then the browser will appear in front of you in all its glory. In order to exit a full-screen mode, you need to press the same key again. Then the browser window will take its usual look.

In general, the "chromium" has a huge amount of hot keys. Just not everyone knows about them. For example, you can go to the previous page using the Backspace button. To enable this or that addition, you need to click the alt key And some digit. Any addition and starts. The main thing is to remember what figure is what is. Etc. Hot keys fully disclose the potential of this Internet browser. So learning them for sure.

What if I have a laptop?

There may be some nuances here, for the laptop keyboard has a special function key, which includes hot keys provided by the manufacturer. Therefore, the combinations of keys for laptops may differ from those that are used on personal computers. However, the keyboard shortcuts for laptops can be defined "to the eye". The fact is that on each function button There is an inscription or a color image different from the main one. That is, the image shows what will happen if you press this key in combination with the functional one.

Thus, laptops look much more convenient in this regard, since they already have their own hot key system. The user needs only carefully examine the keyboard of the device and stretch a little. After that, the control of a laptop with hot keys will seem as simple as with a mouse. You only need to make sure that these commands will not conflict with standard key combinations in Windows. Otherwise, no team (nor "laptop" nor "systemic") will not work.

Conclusion

So, we understood what a key full-screen mode is in the most operating system "WINDOVS" and in various software products. If the system is increasingly or less understandable and there is at least some stability, then everything is not so simple with utilities. Each program has its own set of hot keys. Therefore, the key combinations include full-screen mode can be completely different. Exit here is one: study the documentation coming with the software product. You can, of course, try the "scientific tick method", but nothing good will come out of this. So reserve the desired literature and patience.