Pruning SIM cards to Microsim. How to trim a SIM card under Micro or Nano? Using the finished micro-sim as template

At the moment, there are few gadgets that support the standard variants of SIM cards in the modern world, their place was taken by a micro SIM card. For example, Micro SIM, which appeared in 2003, is installed in iPhone 4 and 4S. And in iPhone 5, 5s, 5c, 6, 6 Plus, 6s, 6s Plus, SE, 7, 7 Plus is already a more reduced SIM card format - Nano-SIM. Therefore, in our article, we will raise the question: how to cut it yourself.

The CIM card can be reduced at home, or to entrust this business to specialists. It is possible to cut the cardy card yourself with the help of subwoofers: scissors or a stationery knife, a nail file or sandpaper and a caliper or a simple line. After trimming, the SIM card can still be inserted into normal phone.

The cropped sim card can be put in a regular phone, but for this you need to return the former look at it. To do this, contact a specialized online store or to the nearest communication salon, they will explain there, how to insert, will offer an adapter for similar SIM cards. The best option It will be - acquiring a whole set, as it includes a set of stickers, which firmly connect the adapter with an antenna so that it does not fall out. If you have not found such stickers anywhere, the usual tape will help you.

In addition, the adapter can be ordered in the online store, its adapter and a pin itself include to remove the tray for the SIM card for the iPhone. You can also order adapters for the desired format of your CIM, thanks to it, the card can be installed even in a regular phone. It is only worth putting a CIM card into the adapter and install in the mobile device.

How to shorten without damaging the chip

Unlike Micro-SIM, which plays an important role of the length of the indents, Nano-SIM is much easier to reduce, since it practically lacks plastic edges. Therefore, the likelihood of damage to the chip is Mala. But, if you accidentally damaged the chip, and your mobile device does not catch the network, do not panic, contact your operator and you will be given a duplicate SIM card of the desired size.

Which SIM card is in your iPhone?

If you decide to change the card in your phone, make sure that it will suitable size, and if the size is not suitable, then read how to cut micro sim for iPhone correctly, because now new iPhone models support only such a type of sim cards. like Macro-SIM, as well as Nano-SIM. Therefore, the owners of such phones will need to either bite the sim card of standard formats to the micro-sim, or under nano Sim. either change to suitable size, since the usual insert is impossible.

How to trim sim yourself

CIM in the telephone of the usual format is a plastic rectangle with chip, a size of 25x15 mm. The sizes of micro sim constitute 15x12x0.76 mm, and the dimensions of the Nano Sim - 12.3 × 8.8 × 0.67 mm.

How to safely reduce SIM at home

In the process of trimming, it may occur by irreparable, namely, they can roll off the scissors, you will not cut it, everything will not go according to plan.

Attention! You must be sure that you know exactly all the nuances, how to crop sim at home and how to do it yourself. Therefore, in order not to damage your sim, you should practice on old unnecessary SIM cards, and after you have done this fraud with your main.

How to adjust the micro format

We will analyze how to do:

First you need to draw a 15x12 mm markup around the chip, which will cover the map. After take truly sharp scissors so that everything is smooth, small manicures are suitable for this. Through the drawn lines, you need to cut extra plastic, after which it remains only to gently cut off the small angle of the card.

At the end of everything, you need to verify the size of the card with the connector in the mobile device. If the card is still large, you need to remove the remnants of unnecessary plastic to the nail file or emery paper.

Make from standard SIM

The process of standing standard SIM cards under nano is as follows:

You need to trim the CIM card, cut down the lower and top of the SIM card, but before you remember where the angle is located to after restore it. At the end of the trimming, the sim card should be 12.3 mm.
In the width of SIM, there will be 8.8 mm, for which it is necessary to cut extra plastic on the sides.
What and how to do, if your SIM card is not included in the slot, is not suitable for the thickness and which SIM card is suitable? - You will need sandpaper. The maximum thickness of Nano-SIM is 0.70 mm, you will need to take a small piece of sandpaper and washed, naturally, a layer with a graphics of the operator. The erasure of plastic does not affect the performance of SIM cards, but before you begin to do it, protect the respiratory paths of a medical mask or gauze, since dust irritates the mucous membrane and has a sharp smell.

Now we will analyze how to make Nano-SIM from Micro-SIM. This process is almost no different from the alteration from the usual SIM card. Microsimka is not only more Nano-SIM, it also prevails in thickness. Microsimki thickness is greater than 0.10-0.15 mm. Therefore, you will also need sandpaper and a little time.

There is an even easier way to trim under Nano SIM. There are a special tool in communication salons, thanks to which you can freely cut a standard map under micro or under Nano Sim or for a small fee or for free to the size you need. Then additionally help you insert a SIM card in the slot of your mobile device.

Conclusion

I hope our tips helped you. Try to perform a universal algorithm described above. See you on site pages!

Video instruction

From year to year mobile technologies Improved, smartphones are increasing, and the details are becoming less. Manufacturers tend to minimalize parts and maximal displays. Changes touched and SIM cards that have undergone changes from the time of its appearance. Today we will tell you how to cut the Simka correctly, adapting it to a new device. But to start studying the existing types of SIM cards.

Types of SIM cards

Did you think about why SIM cards are sold built into a large plastic base. We will reveal the secret - once it was a SIM card! Yes, so big and uncomfortable, but also the phones at that time were not quite small. Then it was considered the achievement that the phone could work without a wire, and the size of the card, thanks to which you can make calls, few interested.

The time was flowing, the devices were modified, the MINI-SIM cards came to replace large SIMs, which we used to consider usually. Further - less. Mini-sim has already become more and less common, and Micro-SIM has become used in new devices. And, it would seem wherever less? But here apple company I decided to reduce the cards for your devices - and Nano-Sim appeared.

If you decide today to purchase a new SIM card, then opening the packaging, you will find a map with several cuts. It is worth choosing the desired SIM card size - and pressed in the right place - and in your hands suitable for your device a card. And if you want to rearrange it into another device, just save the remaining parts - and use them as an adapter.

Slim card trimming

But what if you have a map of an old sample (mini-sim)? Then the usual trimming can come to the rescue. But the question arises, how to trim the sim card? Transform a map to a new format in several ways:

contact salon. As a rule, they have special devices - Circus SIM cards. For a fee or without it (it's lucky) they will help you solve this issue - and adapt SIM to your device.
crop your card yourself.

Cut the sim card with your own hands

Consider the second way in more detail and tell about how to crop the sim card at home. To carry out the task, you must have a pencil, a ruler and sharp scissors at hand. For subsequent adjustment of sizes, the sandpaper may also need, as it is not very convenient to cut the small parts.

First you need to decide on the size of the card you want to get at the exit. If you need to trim the SIM card under micro sim, then its dimensions must be 1.5 * 1.2 cm, if you have a rectangle with the sides of 1.23 cm and 0.88 cm. After As you have decided on sizes, it is worth drawing the outlines of the future SIM card on your card source. And only after that carefully, not assigated chip, cut the card.

If the first fitting failed, the SIM card turned out to be somewhat more than necessary, continue the pruning. If you delete literally several millimeters, it is better to use sandpaper. The most important thing is not to touch the contacts when processing contacts, since when damaged, the card simply stops working. Crop under Nano Sim is much more complicated than under Micro SIM, as the plastic around the chip remains much less, and, therefore, to hurt important part much easier. So be careful and do everything without a rush.
When the pruning is completed, you can safely insert your sim card into the device - and use.

If you need to install a reduced card into a device designed for a larger SIM size, you can use a special adapter.

We hope that our tips were useful to you. And congratulate you on the acquisition of a new smartphone!

Modern smartphones and tablets suggest using reduced SIM cards, the so-called Micro-SIM. This is due to the fact that manufacturers are trying to reduce the thickness mobile devices. It is possible to reduce the standard sim card in the cabin, paying for money. But you can trim the SIM card under the microsite at home using a special template.

IN recent models Smartphones are often used reduced microsim cards. Reduce standard chip can be reduced in different ways.

Order a card of the desired size in the cabin. This is an excellent solution to the problem, but you still need to get to the salon.
When buying a new smartphone immediately ask the seller to crop chip, but you need to remember that this paid service and its value ranges from 200 rubles or more.
You can myself to buy a tool for pruning sims, but it can cost up to 1000 rubles. Trimming just one card is not worth it.

You can trim the card with your own hands using the primary tools and materials. It is necessary to do it carefully not to damage the scheme itself.

The template is printed on A4 format, on 1: 1 scale. If the template is planned to be used more than once, then it is made of thick paper, cardboard, or even a special film.

Required tools

Before performing work, you should prepare the necessary tools and materials.

Sharp scissors or stationery knife;
A ruler, better metallic;
A simple pencil or pen, a pencil is good to sharpen;
Paper sheet for making template;
Emery paper or nail file.

It is important to prepare sharp scissors, such as manicure. Scissing with thin blades less chew plastic.

Instead of a trim template, you can use the sim card of the desired size. It is simply laid on a standard chip and drive. Then extra plastic is cut.

Crimping process

Crop your card is needed with great care, trying not to damage the chip. Perform work in such a sequence:

Print the template on the printer, take the usual sim card, put it on the sheet so that the lines coincide with the future microsim. Carefully drive the card with a pencil.
The sheet is turned over and fixed on it Skotch tape, combining with designated contours.
Turn the sheet back and carefully along the lines are carried out by a stationery knife according to a ruler. It is important not to rush and work with a knife neatly. Instead of a ruler and a knife, you can use sharp scissors, the effect is the same.
After that, remove the card from the sheet and pour plastic with manicure scissors around the edges.
The final stage is a grinding card. To do this, use sandpaper or nail file.

After that, the card is ready for use. If it is poorly placed in the slot, it is a bit perval with the help of sandpaper.

It is worth remembering that if the chip is damaged, it will not work and will have to be changed.

Cut the SIM using a special cutter

Crop the SIM card with a special cutter is completely simple. This device looks like a stapler, just a bit more size. Made of such a cutter made of metal. Depending on the manufacturer, the design may differ slightly, but the principle of operation of devices is the same. The standard chip is laid in the lower part of the device and pressed the upper part.

When trimming the cutter almost excludes damage to the chip. But you do not need to forget that too cheap devices do not cut cards badly. At best, they have to refine the sandpaper, and at worst change.

To finally cut the standard SIM card to the microsim standard, it is not necessary to pay money. You can do it yourself with the help of a stationery or scissors.

Currently, on many modern gadgets, you can only use the reduced version of the standard SIM card - Micro SIM. This is due to the attempts of manufacturers of equipment to save the inner space in the device, to compact the rest of the elements and make our phones and tablets less, thinner, easier and ultimately cheaper in production than their predecessors.

Buying new phone Or the tablet (for example, Samsung, HTC, iPhone or iPad) can be found that the standard SIM card is not suitable for it and to continue to use its usual SIM card after purchasing a new device, it can be trimmed. The main chip remains in place, only the dimensions of the plastic base are reduced. Make Micro SIM from conventional SIM card At home is easy, we will need only sharp manicure scissors, an endless pencil, a ruler, sandpaper (or nail file) and a bit of patience.

The usual SIM card is a plastic rectangle with a chip having parameters 25x15 mm. The micro-card micro-card sizes must be 15x12 mm. Crop the usual sim card until the desired size can be as follows:

If the SIM card after changing the size will be more than you need, it can always be corrected if the size is significantly less - the SIM card will not be able to use and have to be changed to the new one.

If you are afraid to spoil the sim card or just laziness, you can replace the standard SIM card on the card of the desired size in any Beeline office. Upon presentation of a passport, a new SIM card will be issued to the subscriber, or cut to Micro Sim format old SIM card, apparatus, externally resembling stapler. It will take it a minimum of time.

Reverse situation is possible - using micro SIM cards in devices with standard slots. This requires a special adapter for micro SIM cards that can be bought at any communication salon. Thus, your micro SIM card will be universal for most devices.

Experienced communication salon consultants will still remember the time when buyers have caused bewilderment that there are SIM non-standard sizes. Now the presence of several types of SIM cards is the usual thing. Manufacturers prefer all smaller cards, because it saves space inside the device case. Sims of standard size, cumbersome according to modern standards, that and look "awesome in oblivion."

In this article we will tell about all types of SIM and teach how to make a small card from a big card.

Nano-Sim.

Nano-Sim. - The newest and most miniature card for the phone. Its dimensions are only 12 × 5 millimeters. Visually a card is a chip with a minimum of plastic edging.

Apple has again spoke again. Exactly Nano-Sim. The users had to insert 5th modifications to the iPhone. Later, the devices with Nano-SIM slots began to produce other well-known manufacturers - for example, Samsung and.

Understand the differences of three types of SIM cards from each other will help you with the following illustration:

How to change the SIM card size for the phone?

The most obvious way to resize SIM cards is make it a replacement in the operator salon. Such a procedure is completely free, it takes just a couple of minutes, the phone number subsequently does not change. However, this method still has a number of shortcomings:

The new SIM card will not be the numbers stored in the old memory. Of course, a similar problem easy to decide: In the article "" We tell immediately about several ways to export phone numbers. But, alas, many users consider their time too valuable to spend it on the development of third-party software and backup creation methods.
Replace the SIM card in the office has the right only its designer and only on the passport. If the card user gave, for example, parents, he himself will not be able to replace it. Sometimes it becomes a real problem.

If the consultant changes a sim card to a person who is not her designer, this is a fraud! For such an operation of the consultant at least deprived award, and as a maximum - with disgrace will be fired. Therefore, to demand "make an exception" meaningless; No one wants to be unemployed with an impartial formulation in the employment record.

There are several ways to change the sim card dimensions without resorting to replacement. For example, the user can purchase adapter(he is - adapter). The adapters look like this:

Order Adapters for SIM is better on Chinese sites - there they cost the essence of a trifle. For example, a set of adapters from Noosy Together with a needle for the iPhone will cost only 17 rubles. When buying in the cabin from the user may require up to 250 rubles - the difference is more than noticeable!

The set, as a rule, includes adapters of 3 species: Nano-Sim to Sim, Micro-SIM to SIM and Nano-SIM to Micro-Sim. Since SIM cards of reduced sizes still continue to be associated with Apple, manufacturers do not forget to put in the kits and needles to seize the slot under SIM. Use adapters simply: Little SIM card is inserted into the appropriate adapter, then the adapter itself with the card inside is placed in the slot of the mobile device.

Adapters help when you need to increase the SIM card size, but how to be the user if the card, on the contrary, needs to be reduced? The fact that such a need may occur, the owner of the gadget should be thought out at the stage of buying a SIM card - and insisted on the issuance of it so-called COMBI-SIM.. COMBI-SIM. - This is a standard size card from which a micro-sim card can be made in the fraction of a second.

Inside SIM card, standard in size, Micro-Sim. Already carved along the contour, so the user is easy enough to press up with a finger and break a piece of plastic.

Frame to hurry to throw away - She is still able to serve a good service. If there is a need to insert a card into the slot under MINI-SIM, The frame can be applied as an adapter.

Using COMBI-SIM. - One way to change the size of the SIM card up to the reduction. Cards COMBI Provided users mobile communications is free - Of course, in the presence of them in the operator's office.

If the user is already the owner of a standard SIM card and wants to turn it into Micro.without losing contacts, it does not have another exit, except to go on trimming the SIM card. Pruning, as a rule, is carried out using a special device called stapler for SIM. (it is - cutter for SIM, it is - SIM CATTER).

Make a standard Micro-Sim. If there is such a stapler - a second procedure. However, we will expect in the sales office or in the workshop this procedure will be produced is free, not worth it. Employees of the cabin will require a pruning of 149 rubles and even choose a check for the provision of a paid service. In repair shops, they will also ask for money - either at all will send a user to deal with the operator.

The trimming of the SIM card is associated with some risk - if a person producing the procedure hurries or will show inattention, it will damage the chip, and, as a result, the SIM card will not function. Hence the high cost of the services of trimming - no one wants to risk "for just so."

How to trim a sim card with your own hands?

Not in all salons cellular communication There are staplers for SIM - some consultants continue to trim cards with their own hands and ordinary scissors. Perhaps the reader will surprise the fact that no one trains consultants. They independently exhaust such a skill, and many successfully trim the SIM card is obtained the first time.

Nothing amazing - in reality the procedure is extremely primitive! Typically, the main complexity is to find a template. Consultants have a whole table, as a rule, are collapsed by sims of various sizes working and served their period - they are used as samples. An ordinary user about such abundance is only to dream - however, if he still managed to borrow a sim card of the desired size on the role of a template, he can safely try to trust with his own hands. If not, it should be resorted to the help of the printer and the template print (here is a suitable link).

To trim the SIM card, markers, rules and pencils are not needed - if you act according to such instructions:

Take a big SIM in your hand chip up.
On top, attach a sample card so that it completely covered the chip, press it tightly with a thumb and do not let go. If desired, the template to a large SIM can be attached with the help of bilateral scotch, however, experts do not recommend doing this - you can damage the chip.
Gently cut plastic on the sides. Try not to be enough unnecessary, otherwise Simka in the slot will "hang out", and the signal is rubbed.
Card the map on the template across. Here you can act less scrupulously; The main thing is not to touch the chip.
Remove the corner and round the edges - otherwise SIM card does not fit into the slot.

Next, set aside the template aside and try to install the cropped card into the phone to check its performance. If the SIM card does not fit into the slot, carefully cut the plastic and try again. If the map of the slot is just in size and the phone is read, triumph - you just cut the SIM card with your own hands!

note that not any map You can "cut down" to the desired size. The easiest way to remake Mini-sim in Micro-SIM -such a trimming should not cause a user of difficulties. Crop under Nano-Sim. always harder; Plastic around the chip on the card Nano. There is almost no, so the risk to hook the scissors chip sharpets are quite high.

In everyday life, there are still sim cards of an old sample - with large chips:

Cut such SIM - a real nightmare! With some proportion of luck from a similar card can be made Micro-Sim.but turn it into Nano. definitely will not succeed.

Conclusion

At the fact that the manufacturers of smartphones began to produce gadgets that support SIM cards of different types, salon sellers have decently enriched. Of course, not all paid services pass through the cashier - in many cases money for trimming is sent to consultants in pockets. Pruning sims for sellers - "bread case", and therefore free Consultants' assistance has nothing to count.

Therefore, the user who does not want to "feed" employees of salons is better to master the trimming skills. This procedure is sufficiently simple and "surgical accuracy" does not require.