What does the accessory mean is not certified to iPhone. Lightning cable does not charge iPhone or iPad

- Operation is not cheap: "Apple" gadgets are arranged so that the ordinary user will change the battery itself simply will simply not be able, so it will have to spend not only the battery itself, but also to work the master. However hurry to appeal to service center Not worth: perhaps, the case is not at all in the wear of the battery, although the master, of course, will not be informed about it and accurately "will appear" the most "expensive" problem.

Common causes why iPhone refuses to charge, are:

Close Lightning (30 PIN).Most often with this problem, lovers are stuck to wear a smartphone on the beaches - the charging connector is clogged with sand and the plug cannot set up in the hole as it should be. Not only sand is capable of damaging the connector - dust, villi, pieces of fabric accumulate in pockets. Solve the problem clogging connector for charging is simple: you need to clean the hole with the toothpick.

The main thing: not to use metal sharp objects for cleaning, like a needle - so you can damage contacts.

USB port or outlet fault.Apple recommends recharged gadgets from outlets, and not from USB ports - the ports have a completely different purpose, namely information exchange. However, if you have insufficient sockets in your room and you have to periodically recharge the gadget from the computer, you probably noticed that some of the PC ports simply do not give an iPhone charge. The problem is the strength of the current: The USB port has a total of 0.5a, while charging the iPhone - 1a.Therefore, the port of the gadget always "refills" longer. If the smartphone refuses to charge, try changing the USB port (on PCs and laptops they are usually 3-4) or a socket.

Cable malfunction. The cable from the iPhone set is rather fragile - if it is constantly extinguished, the outer braid will break very soon. "Cold" conductive veins inadvertently damage easier. When breakdown, buy a new CERTIFIED cable. Please note that if you buy a Chinese accessory of dubious quality for 150-200 rubles, you risk throwing out money for wind - Apple developers taught Lightning "Recognize" Certified Cables, so fake lovers can easily see on their iPhone 5 such a message:

Users iPhone 4th modification with a 30 PIN connector with such a message will not encounter.

Breakdown components.With such a problem, a straight road in the SC. One of the three faults is possible: breakdown module connector (elimination cost - 500-800 rubles), food controller output (1400 rubles), battery output due to wear (The most expensive fault is to store 2500-3000 rubles). Approximate prices are given: Of course, the cost of work and components will differ depending on the region of the Russian Federation. Council: make sure the work performed in the SC is to post your smartphone at least 2%.

What if the iPhone stopped charging: a phased plan

If the gadget does not "eat" from the original charging, act like this:

Step 1. Restart the smartphone. This solution is so trite that users, if neither paradoxically, they often neglect. Simple reboot can be solved by a lot of problems with a gadget.

Step 2.. Check the cord, charging unit, USB port, outlet. Check, for example, the block is quite simple: disconnect the cable from it and try to "feed" the gadget from the USB. If there is a result, it is certainly in the block, because the cable is working.

Step 3.. Clean the charging connector. How and what to do this, already mentioned earlier.

Step 4.. Use Recovery Mode. - Enter iPhone to recovery mode. Mode Recovery Mode. on efficiency is similar to a simple reboot, however, it is better coping with technical failures (including capable of helping with charging problems).

note: After an emergency recovery, the iPhone settings are reset to factory, so take care of the preservation of important data.

Entered gadget to mode Recovery Mode. So: User first turns off the iPhone, then pins the button " HOME."And finally, connects the smartphone to the PC cable. About staying in recovery mode shows such a picture on the screen:

Exit from Recovery Mode. can be by a long press on " Power».

Step 5.. Take the gadget in the SCIf none of the listed measures helped. IPhone needs quality diagnostics and "operating intervention". Despite the high cost, waiting for the battery or connector for charging does not take more than half an hour.

Conclusion

No matter how reliable and durable manufacturer presented your product, the user needs to be prepared that one day he still has to contact the SC. In the case of technique Apple malfunction Charging and battery connector are among the most common. To avoid expensive repairs and not become a victim of an unfair (or unqualified) wizard, it is recommended to use the proposal of an enlarged guarantee from the manufacturer Applecare.With such a guarantee you will be calm for a smartphone within 2-3 years.

there is people's MethI want to dispel.

They say the fake cable Lightning is not worse than the original. Take such Ashans for 190 rubles and do not soar. Maybe the assembly is worse, but the functionality is one to one.

Just this not trueWhat personally was convinced. There is a difference. Exactly functional, I mean influences your life in the right way.

How I went on this problem

I have a good habit - do not use charging from the kit iPhone.

Why? Standard 5-watt adapter charges iPhone 7 Plus whole eternity - 6 o'clock! You can build up. Therefore, I have long bought a 12-watt charging + original cable. With them, the iPhone 7 plus comes to 100% in just 2 hours.

By this time I was used, so I notice any deviations immediately. Actually, the culprit:

What happened: On the weekend used this black cable Lightning, bought or on Aliexpress, whether the remaining accessory remains. Put through it the iPhone 7 Plus for charging, went on business.

After 3 and a half hours, I looked at the iPhone and worried out of one: 60% instead of the expected 100%. He sinned for charging, the phone itself, but decided to repeat the experiment with the original cord. This time I was sitting near and glanced from time to time.

The result is 2.5 hours. That is, with the original cord, the phone was charged 2 times faster with other things being equal.

As a result, the fact: some cables charging the device is slower. But why? If you listen to Aliexpress lovers, all Lighting cables are the same, and here you have a surprise.

Why is this happening

In Lightning cables cheaper than 500 rubles is almost always laid maximum thin wires. Savings are not taken out of the air. As a result, such cables do not maintain current strength (A - amps) at the level of original or high-quality Lightning cables.

The original cable, as in the photo above, supports current strength up to 2.1 a. (ampere). The strength of the current, in turn, is one of the parameters that determines how your iPhone quickly charges.

Fake and low-quality cables support current strength about 1 A.. May less, maybe 1.5 A. Raughty big. Here it is the difference in quality. So take the Chinese cable, get charging 2 times longer.

Or not? Why no one notices problem, where is the complaint? If everything was so simple, it would have known about it for a long time. Just in the case there is another factor.

Charging model matters

This is the original flat supply of Apple on 5 watts (complete with iPhone). It sues current 1 A..

In principle, it is enough to charge any iPhone.. However, batteries in PLUS models will be charged for a very long time - the device even in passive mode consumes more energy, and such a small adapter barely "cattons" the natural flow rate of the working device.

And this is the original thick charge of Apple by 12 watts (sold separately). Much better - current current 2.4 A..

If you connect it to a regular iPhone, the difference in charging speed almost do not see - the screen is smaller, passive consumption too. These differences are literally 30-40 minutes in favor of the thick block. But for Plus it is a real salvation. Instead of 5-6 hours 2-3 hours.

Repeat: 5-watt charging generates current strength 1a, and 12-watt charging gives as many as 2,4A. It remains to transfer them to the device through cable. He becomes a narrow throat when charging the iPhone.. The worse the cable inside, the slower charging.

In the technical system The original cable Lightning is able to skip the current up to 2,1A.. Almost all cheap cables and fakes and just "analogs" are missing only 1A.that is, 2 times less.

Output: Fake Lightning cables limit the charging speed of any iPhone when using high power blocks - 10 and 12 watts. There is a problem, and now you know about her.

Some chinese manufacturers They know about the problem and label their cables accordingly. Believe it or not - the question is complex.

Here are some more consequences and advice, since we played in Isenlok.

1. If you have a regular iPhone (not Plus), you are practically Do not notice the difference Between a bad and good cable. Especially if you use 5-watt charging coming in the kit. But it is, be it half an hour or an hour. IMHO, the difference between 25 and 50% of the charge for the same time is overpayment for a good cable and 12-watt charging.

2. Plus holders highly recommend that the original cable or models of well-known, not fake brands. Almost everything that is sold in electronics hypermarkets is a branded Chinese. There is trust in Belkin, whose cables are actually certified and maintained current up to 2,4a.

3. All flat Lightning cables (A la noodles) - nonsenseand they will charge iPhone longer Total. From this, my Plus was charged comically slowly, and when I started to use, I stopped at all.

After this story, I try not to use left cables, especially when the iPhone needs to be charged as quickly as possible. But even after such a parse, I am sure that I will believe everything.

So I want ask you. Did you notice a slow charging of your iPhone or iPad from third-party cables? What cords generally use and what charging block?

P.S.Well, the last, for those who slip and did not read. Very, very recommended to buy a 12-watt block, even if you have any iPhone 5S. Inexpensive, really useful accessory without a single minus. And it charges all Apple's devices slightly faster.

Consider the situation when your iPhone or iPad gives a message "This cable or accessory is not certified ...". What does it mean and how to solve the problem.

The need to use only original accessories and their high price Seriously strain the most apple devices owners. Especially strongly emotions start racing when when trying to charge a device or connect it to a computer, a notification appears that "this cable or an accessory is not certified".

Free consultation! Free diagnostics! Warranty to work!

We can repair all apple technique ☎ 953-94-11

The device does not charge, the data transmission becomes impossible, about flashing, creating backup Or restoration can be forgotten. There are several reasons for such behavior of "apple" smartphones and tablets:

• Use not an original cable.
• Physical damage to the wire.
• Pollution connector.

Consider in detail these reasons and learn how to remove the problems with charging and connecting to the computer. But before proceeding to deception of the device or replacing the cable, perform simple actions:

1. Pull out the cable and try to connect it again.
2. Connect to the other uSB port On the computer (it is recommended to use only connectors on the rear panel of the system unit).

If these manipulations did not help, then go to other ways to troubleshoot.

Not original cable

The most common reason for the appearance of the message is that the cable is not certified is the use of non-original wire. With this, many fans of "Apple" are sin: the cost of original accessories is exormably overestimated, and when it is possible to buy the same wire, but 5 times cheaper, the choice becomes obvious.

Another thing is that not all cheap cables will work correctly with Apple devices. Through several connections, the smartphone or tablet can begin to "swear" to the cable, and then it will immediately refuse to interact with it, identifying the Chinese fake.

But the device can be deceived:

This method is not a solution to the problem - rather, the temporary measure until you buy the original wire.

Cable damage

If you use the original "lace", but you still see the message about the absence of a certificate on the screen, then check the physical condition of the cable. It is possible that it is damaged - this is also the reason that the smartphone / tablet cannot be charged or connected to the computer.

Try using another original cable to connect. If it works, then replace the old wire, which has failed.

Problems with the connector

The connector on the iPhone, in which the cable is inserted, is not protected, so after some time after wearing in your pocket it is clogged with various small garbage: threads, pieces of fabric, octo and other mud. Sometimes garbage becomes so much that it interferes with the cable to contact with the connector.

To eliminate pollution, use the usual toothpick. Any wooden, thin product is suitable, the size of which allows you to freely get into the connector. It is impossible to use metal objects, as they can damage the port.

Due to the fact that the original charging device For iPhone have a high cost on the market, people have a lot of problems. They cannot afford such a luxury, and for this reason many people are forced to buy cheap, Chinese charging, understanding, they still do not have any other exit. Happens when mobile device It may not be charged from the non-original cable, how to act in such cases, and what needs to be done, this article will tell us. Having been in such a situation, a person immediately thinks about how to cope with the problem.

What to do when the charge of the battery from the non-original cable does not happen?

It turned out, at least this is a common problem, but there is a common way to solve the problem. Just translate your mobile device into mode called " Air Watch", And see that charging begins. After that, we translate the device into the usual state, and rejoice in the result.

It happens that in some people who are most likely lucky in life does not arise difficulties using non-original cables. They all charge, and rejoice in the result.

How did these difficulties begin? It turned out, since the output of iOS 7, people noticed that after the update, Chinese charging cease to work correctly. But, now the solution to the problem is found, it is enough to use it enough.

Comrades from the United States of America are increasingly fighting for copyrights. In the bourgeoiet in honor, licensing, as well as only original gadgets and devices. Therefore, the emergence of errors and warnings about cable and Accessories Certification Not news for owner iPhone., iPad or iPod.

World famous apple company I went further than others. Starting from the new, seventh generation of IOS operating systems, disappeared the ability to connect a smartphone or tablet with cheap, Chinese USB cables. When connecting a non-original cord, a message appears that this cable or accessory is not certified and its work with this device may be incorrect.. At the same time, if on beta versions of the gadget system simply warned about the problem, now it blocks an objectionable cable.

There are three error problems bypass if the message appears: "This cable or accessory is not certified."

1) The easiest, but also unreliable. This method Not always acts. But in order to try it, do not make much effort.

• You should connect your phone to the network using a USB cable.
• Click "Close" when an error message appears.
• Unlock the gadget and click the same button in the warning window.
• Disable the cable from the network, and then connect it back.
• Press the "Close" button again in a not certified cable message.

The gadget will begin to charge. This method is explained by the bug of the device firmware and is no longer valid, and over time, IPL developers will be able to eliminate this trick.

2) Buy special Chinese cable. What only the talents are not rich in the way. So now, the craftsmen from China managed to develop a cable that is not afraid of blocking from the iPhone or iPad. Creators argue that uSB type It is not at all important for their models, the cords are equally well working with all kinds of gadgets. How long Chinese new generation cables will be able to hold out in the market - unknown. After all, Apple also does not stand still and want to improve the program code to protect against fraudsters.

3) The most difficult, but at the moment the most effective method. Cydia shop has released a special free tweak that will help get around protection.

• To begin with, you need to make a jailbreak using the Evasi0n 7 utility. Instructions for working with it can be found on the network.
• Next, you should run from the CYDIA home screen and wait for the repository update. In the Manage tab, click on the Source button.
• Add next Internet address - http://parrotgeek.net/repo. The program will automatically download all the necessary data from the repository.
• Find a tweak called Unauthorized Lightning Cable Enabler.
• Update the device for the changes to take effect.

After these uncomplicated manipulations, the gadget will begin to charge even with certified cables and astusssuaurov. This method is good in that with the Beta testing of the seventh generation IOS, he was in the shade. And only after the official exit operating system, tweak appeared in common access. Consequently, Apple could not block the actions of the program before the system is released. It is possible that now they will add such a function in new version firmware. But folk craftsmen will come up with something new. As always happens in the struggle of pirates and copyright holders.