Nonoriginal cable iPhone 5S. This cable or accessory is not certified or not supported.

Bumping cable from charging is the Beach of each phone. The most important thing is to find a replacement in time. However, it is not always possible to get up to the original from the iPhone. Fortunately, non-forming counterparts are common. But to use them, you need to try.

The problem is that Apple is too egocentric. Therefore, if something needs to buy users - then only with their logo. And thanks to such an iPhone policy in its program code has several interesting string. They prohibit it to use the cable, which is not released by the parent company. And the cost of the real accessory from Apple is quite high. But in the company cord there is a special chip that is a device and should analyze for work.

How to charge the iPhone is not original wire

But despite all the tricks of Apple, use not a "native" USB cord is still possible. Although it will have to suffer every time every time. So, a list of actions that need to be carried out so that your iPhone is still "talked" the non-original plug and started charging:

To plug charger With the cable inserted into it in the outlet.
Take the plug of the wire and insert it into the smartphone. The latter should be blocked.
A warning will be closed. For this it must be pulled to the side.
Only after that - unlock the device.
Reject everything again, what the iPhone swears.
Without blocking the device, remove the cable plug from the Lightning slot and immediately return it to the place.
And again, reject all the windows that the miracle of apple equipment will notice.

After this simple list of actions, the device should start receiving energy.

Is such a charge of a non-original cable safe?

Similar manipulations using a cheap cable, which for some reason is still not equipped with a normal chip (for example, as Remax wires), it can get very expensive to its users. About new iPhone. 5 Among all its iron have a small, but very unpleasant module. He is almost invisible to the eye, but it can be great to spoil life.

This little ledger is called U2 IC. It analyzes which cable is now used with a smartphone. And if this cord didn't like him for some reason - he simply breaks out. And if this chip will break - you have to either get rid of iPhone, or repair it.

What kind of problem does he call? Everything is simple. Without adequately working U2 IC, the device is unable to receive energy. Even if it comes in terms of the gadget, it does not reach the battery. As a rule, the owners seem to be covered by the battery, and then they go to change it. But it does not help - as soon as the new battery is discharged to zero, more smartphone Do not give signs of life.

And what to do?

Use only high-quality non-original wires for the iPhone! All self-respecting and their name producers have long been a long time ago, what kind of chip inside the plug is responsible for initialization in the device. And they learned even fake it. And therefore, you should not take Chinese "noname" wiring in the nearest kiosk. They are definitely cheap and accessible. But isn't it more expensive then to repair a mobile phone?

It is better to spend a little and purchase an accessory that is a little more expensive than Chinese, but still cheaper than the original. In this area there is where to turn around. Many manufacturers offer their services:

company. It should not even doubt here - this company, according to the assurances, is certified by Apple themselves. Consequently, your gadget will not suffer from the use of wires purchased with this brand;
firm. Their goods attract attention, it is impossible to pass by such a wonderful purchase. Their big bonus is that they do not stop on boring monochrome cables. The range of Remax has dozens of a variety of wiring. In the catalog you will find everything, even DATA cables in the tissue felling, which longer remain efficient compared to the usual;
manufacturer named. Harsh and solid models for mobile phonesthat will not be a problem for the user. They are produced with a leather laptop, which is more reliable even fabric. It is not worth talking about the quality - it definitely is. No gadget, according to user reviews, did not fail while JUST worked with him.

In the Lightning cable, which came to replace uncomfortable wires with wide connectors, no shortcomings, it is better in everything, but this does not mean that you will never have problems with him ...

If the Lightning cable does not charge your iPhone or iPad, then it has only several reasons and two of them can be solved without buying another cable.

The reasons may be the following:

The connector in the iPhone / iPad or the cable clogged;
You use ne. certified Lightning Cable (This cable or accessory is not certified);
The cable broke.

Let's analyze each of the problems in detail, and how can it be solved.

Connector in iPhone / iPad or on the cable clogged

With this problem, I came across personally, visually with additional lighting, the cable connector and the port in the iPhone / iPad look clean. I was still confused that the device was still charged, with a bent of the cable. For me, the problem was obvious - the cable was broken near the connector.

In fact, it turned out that some contacts simply clogged. You can take a match or toothpick, winding it with cotton and wipe as it should. It is not necessary to be afraid to neatly raise the dirty sections without cotton. Connector itself is also desirable to clean.

If, after the iPhone procedures have done, the iPad began to charge or twisted the cable better, then your problem was that.

How to use not certified Lightning cable (not from Apple)

Starting with iOS 7, the cunning guys from Apple was forbidden to use to charge and iPhone sync, iPad unofficial Lightning cable. When you connect to this you will see the following message:

This cable or accessory is not certified, so the reliability of its work with this iPhone / iPad is not guaranteed.

But do not hurry to escape to the nearest store and buy a dear original posting, this stitch can sometimes get around. True, for this you need to tinker, consider the example of charging the iPhone, iPad from the Chinese charger.

Turn on the network from the USB / fork
Connect Lightning Cable to iPhone / iPad
We see flashingly about the fact that we are scoundrels and use a non-certified cable, click "Close"
Do not turn off the device, pull out the cable from it and connect it back to the iPhone, iPad
Again, click "close", we observe how the gadget begins to charge.

This method does not work for everyone, someone has a device at all that the cable is unretended, but charging iPhone./ iPad goes. At worst, you can charge the device in the off state. Again, it turns out not everyone, but it is worth trying.

There is another way to get around the protection, sometimes in the Cydia repositories there is a jailbreak tweak of Unauthorized Lightning Cable Enabler, which in some solves the problem. because of bad work Twitch has no permanent residence.

Lightning cable broke

Everything is obvious here. If you are not a lover to wave a soldering iron, then we calmly go buy new cable. The only thing that can be advised in this situation is to think about how to extend the life of the Lightning cable.

To do this, we need two springs from ordinary ballpoint pens, some patience and accuracy.

The essence of this method is that the metal spring and it simply does not allow to bend the wire to so much after which the wire with time is deformed and fails. In terms of this spring, glitters and only decorate the wire as opposed to the isol.

Read more this method You can read in (author Alexst03).

If you did not find an answer to your question or something did not work out, and in the comment below there is no suitable solution, ask a question through our. It is fast, simple, convenient and does not require registration. Answers to your own and other questions you will find in the section.

Join us in

When you charge your iPhone or iPad through the Lightning connector, a notification with the inscription may appear on the screen. This cable or accessory is not certified, so the reliability of its work with this iPhone is not guaranteed" Usually after this charging stops. What's the matter?

In contact with

Below we will tell about the three most probable reasonsFor which you can see such a message - and explain what you need to do in such a situation.

Before you start, offer you to make a simple procedure: first remove, and then insert the cable back into the iPhone and iPad connector. It also does not prevent try to connect to another USB port or other socket. If in your case there is a random system error (it also happens), it will help. If not - read on.

Cause №1. Use of non-original accessories

Most often, the above message appears when a non-original accessory is used - a cheap replacement of Apple official equipment. Users are trying to save on corporate products - it cost big money to the crisis - and buy much cheaper accessories from unnamed producers. Sometimes such things work, sometimes no.

What to do? You can try to bypass protection. For this:

Connect the cable to your iPhone or iPad;
Click "Close" when the message window "This cable or an accessory is not certified is not certified, so the reliability of its operation with this iPhone is not guaranteed";
Unlock the iPhone or iPad;
Click "Close" again when iOS will show a warning window;
Now - without blocking! - pull the cable from the phone or tablet connector;
Connect the cable again.

Alternative (and much safer for your device) option - buy a cable that will definitely work and harm your iPhone or iPad! There are always cheaper, but perfectly working third-party accessories - for example, a Certified Apple Cable Amazonbasics Apple Certified Lightning Cable is only $ 9.99. In general, it is possible to learn high-quality accessories by logo with the inscription Made for iPhone / iPod / iPad ("Made for iPhone / iPod / iPad") on the package.

Cause # 2. Cable damage

The inscription "This cable or accessory is not certified, so the reliability of its work with this iPhone is not guaranteed" may appear and because the accessory is simply broken. Possible causes: The cable was in water, became a victim of corrosion or physical impact. In this case, it will have to be replaced with a new one - for example, on the legal and quite affordable alternative to Amazon or other manufacturers.

Cause number 3. Rubbish

It is much less common, but still the real reason is a physical interference for charging. The port can be clogged with crumbs, threads / down or any other content of your pockets. It happens more often from the iPhone, but there are similar complaints of iPad users. What to do? The solution is obvious - check the ports on the subject of stuck garbage and clean them from foreign objects (for example, toothpick). If there is no confidence in your abilities - refer to the specialists.

Some owners of the technique of the famous brand EPL are faced with the fact that the iPhone does not see charging or charged one times. This product is quite reliable, but there are cases when for various reasons it fails. It is worth knowing that if the gadget stopped charging, various factors can contribute to this. In this article we will analyze possible reasons Gadget malfunctions and ways to solve the problem.

Why does the gadget cease to take charge?

The reason for which an iPhone is not charged may wage in the phone itself or in its charger. To find out, connect the gadget to a similar serviceable charging. If after connecting the charger it does not work, it means that the reason is still in the phone. An iPhone connector may be damaged as a result:

mechanical impact (gap or cable damage, blow, decline device)
contact with liquid
finding dust, fluff, garbage in charging connector

Among the reasons why the iPhone has ceased to charge, there may also be software failures. As a result of failures, errors arise and commands are not received by the phone controller for charging.

The port may fail due to negligent circulation, sharp movements when connecting and disconnecting the charging cord to the network. As a result of falling or impacts, it may be worthwhile:

power controller
clay connecting socket with a board
charging connector

Perform high-quality replacement of the loop and chip will not work independently.

If water fell inside the device, it can lead to corrosion of internal parts, charging port including. There is a chance to avoid breakage, if immediately after contact with the liquid you turn off the iPhone and you will not use it for several days.

If the phone often happens on dusty surfaces or in the pockets of clothing, the pile, dust, garbage and other small particles fall into the charge connector. This leads to an insufficient port of the port with the cable, as a result of which the iPhone is not infected.

The reason for the iPhone is not charged, the battery malfunction can be. Since the battery is calculated on a certain amount of Charge cycles may have exhausted its resource, and it's time to buy a new battery.

In addition, the use of non-certified chargers may fail the chip controlling the battery charge, the sleep button and the USB function. In rare cases, the use of an inappropriate cable leads to the ignition of the gadget. Cheap chargers do not stabilize the voltage on the network, which prematurely displays the battery.

Manifestations of faults

There are several obvious signs that indicate a charging chain malfunction in the iPhone. These include the following:

the phone is connected to the network, but the charge indicator does not burn (flashes) or shows incorrect data
the device turns off earlier than the battery fully charged
device stopped seeing charging
iPhone only works from the network
constantly flashing battery charge indicator
iPhone is charging if you move the cord in the connector

These features should immediately turn their attention, as they indicate that the iPhone charging is stopped. It should be repaired immediately.

What if the device fails to be charged?

To repair the equipment of the EPL, in particular, the iPhone, we need special knowledge and experience. But before contacting specialists, try to perform several elementary actions yourself. They can be useful in the case when the iPhone does not see charging.

First of all, check the iPhone port for the presence of dirt, garbage, foreign items. An invisible pile and dust in the connector can cause the device that the device does not charge at all or gets a charge. To resolve this problem, take an ordinary toothpick and carefully clean the connector through which the iPhone is charging.

If the iPhone charging does not work after the update or it stops charging sharply, try removing or disable the last installed software, after which you reboot the iPhone.

In the event that the IPhone does not work well or the gadget stopped working at all, reboot it. For this:

at the same time, press the "Home" and "On / On" buttons
hold both buttons for 15 seconds
wait for the shutdown and inclusion of the gadget

After restarting, the sound connection to the network should appear. If I stopped charging the iPhone and establish its work in this way it does not work, you need to try other methods.

If after a while after connecting the phone to the network, charging stopped charging, move the cord in the gadget connector. If the phone has begun to charge, then it is necessary to replace the connector. It is better to contact this problem to specialists.

Frequently cases of the fact that the charger (cable) of an iPhone comes into disrepair. To check it, try to charge the new Gadget company EPL. If charging does not occur, then the cable is damaged inside or outside. In this case, it is desirable to replace it with a new, high-quality.

To charge the battery "non-rigging" charger, it may be needed to 12 hours, and it may seem that charging stops. Therefore, it is better to use the original device.

If you do not charge an iPhone, now I will try to solve your problem.

Especially for you, I prepared 7 reasons, because of which the iPhone may not charge and now I will tell you about them!

Software glitch

The first frequent reason why the iPhone is not charging, it is a glitch in the system itself. Maybe something in iOS hung, and the controller, which gives good to the transmission of the current battery, simply does not work. The easiest way to get rid of IOS from freezing is to make a hard reboot. It is performed easy and simple. Press the HOME key simultaneously and the lock button and hold them about 20 seconds.

At the same time, pay attention, when rebooting, we will light up white screen with an apple.

At this point, the keys are not needed yet. Hold Home and blocking for more than 5-8 (so far it will go out all this).

After such " hard reboot"Turn on the iPhone again and check, the iPhone is charging or not.

Problem firmware

If your iPhone stopped charged after updating the system, then there is some kind of glitch when the firmware happened. It does not apply to some particular version of iOS. That on the 11th, which is on the 6th, in principle on all versions of ios., iPhone is charging :)

Another thing is that sometimes after updating the firmware, the smartphone stops charging. Although everything worked fine before the firmware. What to do in this case?

1. Make Range

If before the update on new version you did backup Your device (backup), then in this case will not be difficult to restore the device via iTunes. It is done very simple. IN program iTunes. For this is special button « Restore from copy...»

2. Restore factory settings

If you did not do the backup, it is very bad: (as in this case will have. When full reset All information from the iPhone is deleted. Including all photos, video and music will be removed.

Faulty charger

If the iPhone is not charging, then very important moment When searching for a reason, it is a check of the charger and cable. In the next point we will talk about the Lightning cable, and now in detail about charging.

Here is this block, too, may fail:

Simply put, sooner or later he can burn. Especially if we are talking about a cheap Chinese charger. In general, it is impossible to charge the iPhone "left" charger. There may be very and very harsh consequences. At best, the battery is extended much faster, and at worst, in the iPhone, something will break or he will simply explode.

Okay, okay, do not perceive words with the explosion very seriously. Still, not so many iPhones exploded around the world.

Try to take another charging, and if you do not have it, then try to deliver the phone to charging through the computer. If it works, it is good, we are looking for another charging and use on health. If it does not charge from the computer, then continue to seek the cause!

Faulty Lightning Cable

Earlier, I already said that in the next point we will talk about the Lightning cable, because they also fail and even more often than the charging unit.

Here is this original Apple cable with inaccier use fails after 1 year:

It is a dofiga, but breaks faster than some left.

If you have the opportunity, you test the performance of charging using another cable. Because even if your old cable appearance It looks great, it does not mean that he is working.

If there is no other Lightning cable, you will have to buy a new one. Earlier I already said that neoriginal charging It is impossible to use, but it is fortunately not related to Lightning cables.

Cable can safely buy on Aliexpress. Another thing is that they are not always worthy of quality. But if you take from a proven manufacturer, for example, in the UGREEN store, the cable will work much longer than the original Lighting, and it will also cost every 5 cheaper. You can buy.

Cheap wires either no no longer canceled, I took myself a beautiful Lightning cable in a denim felling. It costs less than the 3rd dollars. You can buy.

Buggy port Lightning

With the Lightning cable, I figured out, and now let's get up the question of the port itself where this charging is inserted. Now I am talking about the port where we are inserting Lightning cable.

In the worst case, something could break there, and in the best there was just a lot of dust, garbage, seeds and other rubbers and because of this, contacts with the cable will not be contacted.

Look at the port and if there is dirt there, take a small wand, like the toothpick and clean the port gently.

USB port does not work

If you charge the iPhone from the computer or laptop, it may not work trite USB port, or give out insufficient nutrition. Try another port, and better use the charger or PowerBank.

Faulty parts (battery, loop, drowned, etc.)

If nothing helped, and the iPhone still does not charge. Most likely the problem in the malfunction of any components. It can be "killed", time or bad charging, battery, broken loops from falling, other damage and the like. In addition, if your smartphone "Drill" or in it simply got moisture, it can also cause breakage.

An option in this case is one - bring the iPhone to the diagnostics to the specialists. Let them look.

Conclusion

I hope this lesson at least somehow helped you. And if you managed to solve your problem, the iPhone was not charged, and now everything is Okey, then you will definitely write in the comments that you had a breakdown.

That's all. So far!