After installing Windows 10, USB works. USB port after reinstalling Windows

After installing the Windows 10 operating system or transition to it from previous versions, it may happen that the peripheral devices connected via USB ports are often disconnected or even stop working correctly by issuing a warning warning icons in the form of a yellow triangle in the device manager, As well as the error code 43 in the description. What to do in this case? First you need to define the culprit.

Of course, if several devices are falling down at once, then it is clear that they are most likely not to blame and the reason lies in the computer itself. If only one device is buggy, then for diagnostics you need to carry out the following manipulations:

Try switching to the next USB connector. This advice is especially relevant if the system unit costs somewhere under the table in the dusty corner and is rubbed only once a year. And then before this you need to see if it is not scored by dust or garbage.

Replace connecting cable. This is generally a sore place - cords are lying around somewhere, they bent the connectors, they are pasted with a chair or shoes, nibbled pets, etc. As an example, you can take iPhone smartphones, which have branded cables near the plug after a couple of months of active use.

If an external hard disk fails, the error appears most likely because it is not connected to the second connector on the cable and it is not enough trite.

If there is a different computer or laptop, connect the device to it and watch the work. As an option - you can go to friends or relatives. If there is a gadget without problems - everything will become clear immediately.

So, we concluded that the reasons for the problems with USB ports are hidden in the computer. Let's look for them!

Outdated drivers and BIOS

Very often, outdated or incorrect drivers are to blame. This is especially noticeable when updating the system, when everything worked on the old OS perfectly, and after the update on Windows 10, glitches started with an error 43 and the messages "The device is not recognized". To fix it is necessary to go to the manufacturer's website of the motherboard, search for a new version of the software and install it.

Alternative option - download online client Drivers Solution Pack and start updating drivers.

Usually after this fault is eliminated completely and irrevocably.

I also want to tell about a pair of cases when problems with USB ports on Windows 10 appeared due to the obsolete version of the BIOS. And both times it was not on old stray glands, but new asus laptops after updating the pre-installed "eight" to the "dozens". Everything was all downloaded by the latest version of Bios from the official website and flashing the motherboard with the help of a special utility that went bundled.

Reinstalling port concentrator

Sometimes correcting errors with yusb helps such a trick: click on the "Computer" icon with the right mouse button and select the "Management" item. You will open a system snap "Computer". It needs to select the Device Manager section:

Here we find the section "USB Controllers" and open it. We need an item "root USB hub. Click on it right mouse button and select the "Disable" item. Close the window and reboot the computer. Returning back to the dispatcher and turn on the hub. After that, all USB ports must earn no problem.

Settings Power Schemes

This case is especially relevant for laptop owners, netbooks and ultrabooks. The fact is that in order to save the battery energy, the device's selective disable function is activated and if many consuming gadgets are connected to the computer (telephone charging, card reader, portable column, etc.), then Windows 10 can Selectively disable one or more devices at once.

To disable this option, we go to the device manager and open the properties of the root USB hub. On the "Power Management" tab, you must remove the checkbox "Allow the shutdown of this device to save energy." After that, close the dispatcher and reboot.

nastroisam.ru.

USB ports on a computer or laptop do not work, front ports do not work or stopped working after installation

If you do not initialize it when connecting the device via the USB interface, it is not determined by the operating system and does not give any messages at all, then the reason for the disabled controller is responsible for this port.

The first thing to be done is to see the state of the ports in the Device Manager. To start it, enter the "Devmgmt.msc" command in the Run (Win + R) command.

Open the USB Controllers section and see the USB Hub state or the root USB hub.

In the picture, one of them shows disconnected. Turn it on with the right button - use.

You can also go to the Properties section - the power management tab, disable the device to disconnect the power saving devices.

In the same properties, you can check the relevance of the installed drivers, update them if necessary.

If the controller is marked with a yellow exclamation mark, then try reinstalling its driver, or delete all controllers and reboot the system, after which they must automatically be installed and operate properly.

All ports do not work

If all ports do not work immediately - reboot the computer and go to the BIOS (F2 or DEL key at startup). Depending on the type and version of the BIOS, the settings may vary, you should find the "USB FUNCTION" and "USB 2.0 Controller" parameters, they must be in the "Enabled" position. Most often they are in the section "Onboard Devices Configuration"

Only front connectors do not work.

If we are talking about a PC, then the front and rear connectors should be distinguished. The rear are located directly on the motherboard, the front is connected to it using a special loop. Therefore, when the front USB stopped working, first check the operation of the device when connected to the rear.

How to find a driver for an unknown device (Error 28)

If it is in good condition, you will have to remove the system block cover (when the computer is turned off), and then check the configuration of the front connector to the system board correctly.

The correct connection of the connection can be found in the description of your motherboard, but usually, how to connect it is clear on the signatures on the motherboard.

USB ports stopped working

The situation is not so rare - we will try to figure out the problem and quickly solve it yourself.

So, first need to be clarified - the USB was stopped working on a computer or a USB was stopped on a laptop. The strategy in each case will be somewhat different, as well as a few will differ a sequence of actions for self-diagnostics and restoring the correct operation of the universal serial tire controller (USB, Universal Serial Bus).

USB diagnostics in computer and ways to repair

If the USB computer has ceased to work, it is necessary to hold a number of activities:

if USB does not work on the front panel of the stationary computer case, then the mechanical breakdown happened.
either when connecting a USB system block housing (4 wires; 2 of which are signaling, and 2 provide power) to the pads on the motherboard (the FRONT PANEL) error occurred - the USB is not connected correctly (the polarity is broken, or the transmission wire sequence data);
to check the correctness of the connection and exclusion of a more serious breakage of the computer's motherboard, you need to connect a working device, such as a flash drive, to connectors located on the back of the system unit - USB motherboard. At the same time, you never hurry to connect devices to the front panel - there is a risk of burning a flash drive in non-compliance with polarity.
Thus, if the flash drive is determined from behind the system unit, and it does not want to work in front of the front - the contact in the USB panel is disturbed (soldered in the connection places and the connector itself is often laid out), damaged by the USB connector (this fact is easily detected during visual inspection), not A completely connected USB hub is connected or not connected on the motherboard, for this you have to remove the protective cover of the system unit and estimate the state, armed with a manual with the correct indication of the connection sequence.

For each motherboard, it is better to watch the sequence separately, as there is a direct sequence (reverse), horizontal location of the pad and vertical. It is worth paying attention to the colors of the contacts and the pads (if in any way it is painted), or the color of the contacts and the location of them relative to the metal pins-contacts of the pad (especially the missing pin).

If the connection to USB connectors on the motherboard did not give anything, it is worth paying attention to the color of the USB - black or blue. If the USB to which the flash drive is connected, has a blue color (plastic inside the connector itself is painted in blue as in the picture), then this suggests that we are trying to work with a USB 3.0 port. It is more powerful in all concepts connector, but also more problematic. The fact is that such USB connectors may not work after reinstalling Windows without individual drivers, or it is not correct to work correctly with some devices even if you have. This situation can lead both to the impossibility of work, and to various sorts of failures - blue screens and computer hangs. Therefore, for complete diagnostics, we are looking for a black USB connector and connect to it. If the device determined - we conclude that the case is in the drivers for USB 3.0. To eliminate this problem, install the drivers from the motherboard kit or best download the manufacturer from the site.

If devices are not defined in any of the USB ports, then the reason is possible in the controller, then the saving will be the purchase of a separate device called USB2.0-PCI or USB3.0-mini PCIE extension board, as the USB controller repair is repaired for the motherboard Computer is not profitable. Boards stand in different ways and different in speed characteristics and nutrition.

The USB2.0 card is traditionally cheaper, less speed will suit the old computer; But it may not be accomplished in a new, with a MICROATX motherboard format (small PCI connector board).

USB3.0 card is usually more expensive, more powerful and faster, but it does not suit the old computer; It can be applied if the PCI slots are busy or observed by the video card.

Here is a complex of work on diagnosing and restoring performance for a USB computer - for a laptop may be somewhat more complicated (or easier).

Independent diagnostics and repair USB laptop

The algorithm for diagnosing and repairing a USB laptop is similar to the same computer, but there are some features. Firstly, the diagnosis is very simple, the second repair is quite complicated. I want to immediately warn that accurate diagnostics is best done after a complete reinstalling Windows, since there is a chance of a curve of the previous installation of drivers and write erroneous parameters, which will impossible to restore the correct operation of the laptop. Diagnostics is a sample of work of black and blue connections on a laptop (USB2.0 and USB3.0). If USB3.0 does not work - we try to connect the USB Flash Drive to the 2.0 (black) connector, if USB2.0 works, we conclude that you need drivers for USB3.0. It is best for these purposes to use official sources with drivers, i.e. Laptop manufacturers sites. Different drives with auto installation drivers can help, and may not. Therefore, you need high-quality repair of the laptop - be prepared to darnate (this applies to all). If it is found that even after reinstalling Windows, none of the existing USB ports does not work - it's bad. One hope that someone just turned off them through the BIOS - go to the BIOS and turn on. Otherwise, most likely there was a failure of the controller or had problems with the southern Laptop Motherboard Bridge. In any case, the complex repair of the laptop will be required - the replacement of the bridge, which can be carried out only in the service center.

Naturally, before this it is necessary to eliminate the mechanical damage to the USB ports of the laptop, which can also lead to short circuits. Such a situation will be characterized by phenomena - the laptop turns off when the USB connection is connected or the laptop turns on and off immediately. It is possible to estimate mechanical damage to visually, looking into the connector slot: if all the glands on the spot are everything in order. And to inspect all connectors, and not just where you want to attach a flash drive. If a problem connector is detected, a laptop is repaired - replacing the USB port.

hpc.by.

USB ports on a laptop do not work

A number of laptop users may encounter a situation where the USB ports on a laptop do not work, and devices connected via them are not recognized by the Windows system. This problem is found quite often, and may have a variety of reasons, making it difficult to work with the user's USB devices you need. In this article, I will tell why USB ports on a laptop do not work, what are the reasons for this phenomenon and how to fix it.

Corrend the problem with USB pores on a laptop

Causes of problems when USB ports on a laptop do not work

So why did USB ports on the laptop stop working? The reasons for this dysfunction may be as follows:

How to fix brochure ports yusb

In order to correct the non-working USB ports on a laptop, you need to do the following:

Video solution of the situation at which the USB port does not see the device

In this material, I reviewed the situation in which USB ports on a laptop did not work, listed a list of causes of this dysfunction and served a number of tips for its solution. If you do not know what exactly the reason for the specified problems with the USB ports was the reason, then consistently fulfill the entire complex of the Soviets listed by me, this will help effectively solve the problem with the malfunction of the YSB ports on your PC.

The best does not work USB ports

Sdelaicomp.ru.

Why do not USB ports work?

I have repeatedly received questions related to the fact that no USB device could be connected. The system simply did not find the device. And here it is obvious that the problem is not in the device itself, if the user tried to connect a bunch of devices, and there is no result anyway.

With such a problem, they can face both home computers and laptop users. I can not give immediately the answer, why you can not work with USB devices, so I will try to disassemble the reasons for this problem and find a way to get rid of this breakdown.

What is the reason for the disability of USB ports?

Please note that we will disassemble the problem when no USB device cannot be connected at all. About what to do when only one port does not work, we will tell already in another article. It will be discussed here about the general problem when USB does not work in principle.

The first thing we need to check is the controller responsible for the ports. It is possible, it is simply disabled. How to turn it on in this case? It will be necessary to go to the BIOS. When you turn on the computer (before the system loads), press the F2 key (on some OS, you need to press delete or F8). It also depends on the fact that you have installed for your motherboard.

So, we ended up in BIOS, what's next?

Here, pay attention to the category "Integrated Peripherals". But this item you will have if the Award BIOS is installed. There is also AMI BIOS. In the second case, pay attention to the inscription "USB CONTROLLER / 2.0). How to understand whether the controller is included, or not? If the controller is enabled, we will see the inscription "Enabled". When controllers do not work, the word "disabled" is written. Make sure the controllers are turned off? Turn on, after you do not forget to save the changes and restart the computer.

It is possible that we have connected the non-working device, because of it the system cannot connect the rest. It must be checked. So, be sure to turn off the computer, and then disconnect each device. Next, turn on the PC, then try inserting a USB media that exactly works (only it only!) If we can work with a flash drive, then USB ports do not work here for the peripheral devices.
Now we will try to correct the problem using the device manager. The manager of the USB serial bus controllers must be in the manager window. Carefully examining it, we can understand if we have problems with the devices. If they are, then an exclamation mark appears next to the device. He tells us that a malfunction is really present.
If it did not help, then it may be worth getting rid of USB controllers (delete them through the same device manager). After rebooting the computer, connect the devices, and the system will automatically set new controllers.
There is such a wonderful function in each OS, like the "system restoration". You can try to return the system status on that day when the USB devices also worked.
It may help to restart the USB concentrator. In this case, it will not work, but we will correct it with a simple reboot of PC.
If you do not have the most "ancient" PC or laptop, then USB hubs can disable all or some devices to save power. And Etmo notifications do not come any user. Accordingly, we need to turn off the economy function. Go to the Device Manager, find the section "Universal Serial Bus Controllers", followed by the "root USB hub" masonry. It remained only twice click on the left mouse button, after which it goes into the "Power Management" tab. Next to this graph, take a daw - "Allow the disconnection of this device to save energy." Do not forget to save the settings. Thus, it will be necessary to disable the save function from each connected device.

If we connect a flash drive 3.0 to a computer that provides support for USB ports 3.0, and we see the message " This device can work faster when connected to Super-Speed \u200b\u200bUSB 3.0", These are friends, it means that we either insert the USB flash drive not in the USB 3.0 ports (with a blue tongue), or with their functioning there are problems, and they work in USB 2.0 mode. What causes the causes of problems with the work of USB 3.0 ports on computers, and how such problems are solved, we will try to understand today's article.

Let me remind you, the bandwidth of the USB 2.0 interface - 60 MB / s, and USB 3.0 is 10 times more, 625 MB / s. Naturally, rare from removable drives connected to the ports of USB 3.0 of the computer work at the limit of the capabilities of this interface, but it is of fundamental importance for individual information storage devices. For example, many modern external HDD models on the USB 3.0 interface will be able to issue a linear speed of 100-170 MB / s. Actually, the same as when connecting the inner rigid disks to the SATA interface. Whereas on the USB 2.0 interface, the linear speed of external hard drives on average is usually held at 30 MB / s. USB flash drives 3.0 on the USB 3.0 interface write data faster 2-3 times, and read - faster than 3-5 times. By the way, we talked in detail about the operating speeds of flash drives on USB 2.0 and 3.0 interfaces. In general, friends, if you have a removable drive 3.0, I believe that it is possible to deal with the performance of the USB port 3.0, if problems arose - the business is worthwhile.

Settings in bios.

USB 3.0 ports can work as part of USB 2.0, if so they are configured in the BIOS. This moment must be checked first. We go to the BIOS and are looking for, where USB ports are configured, usually this is the Advanced Advanced Settings section and subsection "USB Configuration". Or something with similar names. Here it is necessary to check whether USB 3.0 support is active. The "USB 3.0 Support" parameter must be "Enable". The "Enable" value should also be at the XHCI Hand-Off parameter, it may be called "XHCI Pre-Boot Mode", simply "XHCI" or somehow differently, but with the presence of a key term "XHCI".

XHCI is a USB 3.0 controller, and if the BIOS is not implemented by a separate item for supporting this "USB 3.0 Support" type interface, its turning on / off is implemented due to the controller. On some motherboards, the XHCI controller parameter may also be other values \u200b\u200bof the "auto" or "smart auto" type, providing USB ports 3.0 in 2.0 mode before loading the operating system with its USB 3.0 drivers. And such values \u200b\u200bmanufacturers of computer devices are usually set by default in order to make it possible to work with the modern USB interface inside the operating systems, while avoiding the setting of the installation of individuals, in the distribution kit that does not have USB 3.0 drivers. The most striking example is the official builds of Windows 7, the problem with the lack of drivers of which we discussed and solved. If you are on your, friends, PCs or laptop for installation cases of Windows 7 without integrated USB 3.0 drivers there are USB 2.0 operating ports (with a black tongue), you can safely set the XHCI controller setting to the "Enable" position. Only when installing the "seven" do not forget that the USB flash drive must be inserted into the USB 2.0 port.

Update Driver

Inside Windows operate at USB 2.0, the USB 3.0 interface may vary by the banal reason for the incorrect installation of the controller driver. This problem is solved by any of the ways to combat incorrectly installed drivers - or their update, or reinstalling. We use to start regular Windows capabilities. We go to the Device Manager. Reveal the USB Controllers Branch. Click expandable host controller. More often it is as "an expandable host controller Intel (R) USB 3.0", but in our case, for example, its manufacturer is the Japanese company Renesas. Call the context menu on it and select the driver update.

I have faced such a long time with such a problem on the already installed Windows 8.1 operating system. The computer was given to me so that I reinstall the system with Windows 8.1 on Windows 7, and first of all I checked the USB input. Connected a flash drive to it, a computer mouse, but a laptop never saw any equipment. Then noticed that the USB itself is a blue port of blue, and this suggests that it is USB 3.0

It does not work for only one reason, the driver for USB 3.0 is not installed in the system.

To check the presence of drivers in the system, look at the device manager, there are no questionings there and other characters next to the installed drivers. If there are no suspicious signs, then the driver is installed in the system, but it is either old or does not suit the operating system.

What are the problem solving options?

1. Alternatively, I downloaded to your USB 3.0 driver server for the Intel, AMD and ASUS motherboard. You need to download one of the drivers presented.

How to find out what your motherboard do you have?

On laptops, there is usually a sticker type Intel or AMD.

In the Device Manager in the USB Controllers section, pay attention to such inscriptions:

As you can see in the photo above, I have installed a motherboard with an Intel chipset, respectively, the driver needs to download exactly this manufacturer.

2. Download DRIVERPACK Solution, then install or update the USB 3.0 driver. The program is absolutely free and does not require installation, but for this 1 version requires an Internet connection.

3. If the two top options helped you, you need to either install from disks that were given when you buy a computer, or use my article "Where to download Drivers". In this article, I showed how to download firewood from official sites of manufacturers such as Acer, Samsung, Toshiba and Dell. The video is attached to the article.

But I think that the first option will necessarily help in solving this problem.

Immediately after installing Windows Operating System 7, some users notice that USB ports do not work on their computer. Let's figure out what actions need to be taken to be able to connect devices to the PC on the above protocol.

Immediately, we note that this article will tell about a specific problem after installing, reinstalling or updating Windows 7 OS, that is, about the situation when everything works fine before installing the operating system, and after performing these procedures, it stopped functioning. We will not dwell on other possible faults related to the fact that the computer does not see the USB device. A separate lesson is devoted to the specified problem.

We studied the problem has two main reasons:

Lack of necessary drivers;
Incorrect entries in the system registry (after updating the wist to Windows 7).

Method 1: USB Oblivion

This solution is suitable just if you updated to Windows 7 with an earlier operating system. At the same time, entries in the system registry of previous connections of USB devices can be saved, which in the updated OS will be incorrect, which will cause problems with further connection attempts. In this case, all records about previous connections must be deleted. The easiest way to do with the USB Oblivion utility, which is just intended for the specified purpose.

Method 2: USB troubleshooting tool from Microsoft

Microsoft has its own USB troubleshooting. Unlike the previous utility, it can help not only after installing the operating system, but in many other cases.

Method 3: DriverPack Solution

After installing Windows 7, it is possible that your computer will not be able to receive and transmit data via USB protocol due to the lack of necessary drivers. Especially this situation is often found if USB 3.0 connectors are installed on a stationary PC or laptop. The fact is that Windows 7 was developed even before the specified standard began to implement massively. For this reason, in the basic version of the named OS directly after installation, there are no necessary drivers. In this case, they need to be installed.

It is easiest to solve the specified problem if you have a disk with the necessary drivers. In this case, it must only be inserted into the drive and unpack the content on the computer using the displayed prompts. The performance of USB ports will be restored. But what to do if the necessary disk did not turn out at hand? Actions that need to be taken in this situation, we will look at further.

The easiest task is to solve using special programs designed to search and install missing drivers to a computer. One of the best applications in this class is Driverpack Solution.

Run the program. When activating, it simultaneously scans the system for connected devices and detects missing drivers.

Click on the button "Configure the computer automatically".

After that, the program itself will create a recovery point in case if an error is allowed during the setup process or you just want to roll back to the old parameters in the future.

After that, the procedure for installing drivers and setting some PC parameters will be performed.

After the procedure is completed, a message will appear that all the necessary settings are made and missing drivers are installed.

Now you need to restart the PC. Click "Start". Next click on the triangular icon located on the right side of the button "To finish work". Click.

After restarting, you can check, earned USB ports or not.

Method 4: Manual Driver Installation

The required drivers can also be installed without installing additional software that ensures their search. But for this you will have to tinker a little more.

Press "Start". Enter B. "Control Panel".

Go to K. "System and safety".

In the list of instruments "System" Click on item "Device Manager".

The interface is displayed "Device Manager". A list of various types of devices that are currently connected to your fixed computer or laptop will be presented in the shell. Click on the name of the group "USB Controllers".

The list of elements opens. You need to find one of the following items in the list:
- Generic USB Hub;
- Root USB concentrator;
- USB Root Controller.
These are types of ports. In the list, most likely, there will be one of these names, but it can be represented several times, depending on the number of USB outputs on your computer. Despite this, the procedure described below is enough to do with one of the identical elements, since the driver on the computer is installed for all ports of the same type. If there are several different items of elements from the above list, then for each of them will have to perform manipulations separately.

So, right-click ( PKM.) By the name of the item and select from the list "Properties".

The window will open, in which you need to click on the name of the tab "Intelligence".

After that in the field "Properties" From the list of the list, select Option "ENGLISH ID". In area "Value" The device ID is displayed, that is, in our case a USB port.

These data must be saved. They can be recorded or copied. To fulfill the second option, just click PKM. According to the content of the region "Value" and select the menu "Copy".

Attention! The main thing, after that does not copy anymore no data until the operation of the search for the desired drivers is complete. Otherwise, you simply replace information in "Exchange buffer" About drivers ID new data. If you still need to copy something else during the procedure, then pre-insert the data from the equipment properties window in "Notebook" or in any other text editor. Thus, if necessary, you can quickly copy them again.
Now you can proceed directly to the search for the necessary drivers. Open the browser and proceed to one of the popular online driver search services - Devid or Devid Driverpack. You need to drive into the search box of the site, the data that you have copied in advance, and click on the button that starts the search.

After that, the results of the issue will open. Select the option that matches your operating system (in our case Windows 7) and its discharge (32 or 64 bits), and then click on it.

If you use the Devid DriverPack service, then it will be necessary to specify the name of the OS and the bit before you start the search.

After you switched to the driver's page, download it, if necessary, unpack from the archive and run on the computer, following the prompts that will be displayed on the monitor. After restarting PC, problem USB ports must earn. If this happened, we are looking for the origins of the problem in incorrect registry entries, which was described above.

There is another download option of the necessary drivers - to do this from the official website of the manufacturer of USB controllers, which are installed on your PC. But in this case, you must definitely figure out the address of this Internet resource, as well as the exact name of the controller model.

There are two main reasons why the USB ports may not work after installing Windows 7, although they functioned normally before that. First, these are incorrect entries in the system registry remaining from the old OS, and secondly, the lack of necessary drivers. Each of the specified problems is solved in several ways, which we painted in detail in this article. So users, familiarizing yourself with the material, can independently choose the most convenient and acceptable option for them.

Hi friends! The other day, one of my buddy bought a new laptop with a pre-installed Windows 10 and asked me to install Windows 7 on it, but At the beginning of the installation of the system began to go out« Not found required driver for optical disk drive... ". We all know that this is due to the fact that the Windows 7 distribution does not contain driversUSB 3.0. and you just need to connect the bootable flash drive to the portUSB 2.0, but there was no such port on the laptop,all ports were USB 3.0 . At such a case, I have a different flash drive with drivers that you need to slip the Win 7 installer during installation, but this number does not ride. Attempting to use a portable USB drive and DVD-distribution Windows 7 also ended with this error. As a result, I applied for advice to my friend Vladimir and he advised very interesting decision!

Hi friends! If you look at the comments of our site over the past year, then you can see one constant problem that occurs from many readers, the essence of it. If you bought a new laptop (no matter what manufacturer), then on the official website of the manufacturer your laptop can download drivers Only for new operating systems: Windows 8.1 and Windows 10, and there is no drivers for Windows 7 and not foreseen.What kind of sin, Windows 10, and Win 8.1 work slowly on all laptops in the price range up to 30 thousand rubles (such such laptops buys most residents of Russia). The point here is certainly in low-power processors, tooyim are equipped with such laptops and Insufficient volume of RAM - 4 GB, and of course add brakesclassic hard drive (information storage device,based on the principle of magnetic record, the development of the last century).

The first thing that comes to the head of a person who bought such a laptop is to install it on it old and good Windows 7, with the hope that it will work faster (partly it is actually so), about my opinion, installing Windows 7 to a new laptop is not the most successful option, since the conflicts of the newest iron and the old operating system are inevitable. It is better, in this case, it will not be necessary to convert a hard disk into the GPT style, and there will always be a second working operating system pre-installed from the store - Win 10 or Win 8.1.

If both of the above options are not suitable for you and you decided to demolish everything from a hard disk of the laptop, and install on itWindows 7, I warn you to It will be a rather difficult task even for an experienced user, because to successfully install the seven, firstly, you need to create a specially bootable USB flash drive with Windows 7 so that the system sends the USB 3.0 ports, thenyou need to disable the UEFI interface on the new laptop, then convert a hard disk from the GPT style in the MBR and only after that Windows 7 will be installedBut that's not all!Those users who will be able to install Windows 7 to their devices already after successful installation systems are faced with the last and sometimes insurmountable task - find drivers for devices of their laptop under Win 7.

And in fact, and what kind of miraculous way to download the driver for a laptop on the Internet, if the drivers on the local Internet and Wi-Fi adapter are not installed, and the driver assembly located on an external USB disk cannot be launched, as they do not work on the laptop USB 3.0 ports (After all, the driver for the chipset and the USB controller is also not installed). Of course, if there is a drive on your laptop, then the driver can be downloaded on another computer and pour into a DVD disk, but not everyone has a second computer, but there is no drive on many new laptops and ultrabooks, and the builds with drivers on the DVD disk Do not fit.

Friends, actually solve all these questions can be! Let's step by step, go together all the steps of installing Windows 7 to a new laptop and everything will become clear to you.

Assembling Drivers Snappy Driver Installer and Driverpack Solution

Firstly, Before installing Windows 7 to a new laptop, download the driver assembly"Snappy Driver Installer »On a portable USB disk or USB flash drive. Go to the official assembly site

https://sdi-tool.org/download/

and choose a full package SDI FULL (It is suitable for those who want to have a complete set of drivers with it and not depend on the availability of Internet access, the size of 12 GB) and click "Download"

The folder with the drivers downloads to us on the computer, we will run the driver installerSDI_X64_R496.exe directly from the folder.

I also download the "Driverpack Solution" assembly", Which contains a huge number of drivers in almost all known devices. Recently, many users scold this assembly, since in normal mode it installs various side software along with the drivers, but this will not happen, eif installing drivers in mode"Expert" In this case, only you selected drivers will be installed on your laptop.

https://drp.su/eng/download.htm.

Choose "DriverPack Offline" and click "Download"

ISO image "Driverpack offline" downloads to us

After downloading, you can copy the contents of the image to the folder with the name "DriverPack", will run DriverPack.exe driver installer directly from the folder.

So, assembling Drivers "Snappy Driver Installer" and DRIVERPACK Solution downloaded by us on the portable USB disk oruSB flash drive.

Creating a Windows 7 boot flash drive

After creating a boot flash drive from Windows 8.1, download and connect it to the virtual disk drive, then go to the virtual drive to the "Sources" folder and copy the install.wim file,

Then go to the Windows 8.1 boot flash drive also in the "Sources" folder and delete the install.esd file from it,

A file.

install.wim (from the Windows 7 distribution) copy to its place.

That is, we replaced the file install.esd on the boot flash drive 8.1 by the fileinstall.wim from the Windows 7 Distribution. As a result, we got a bootable USB flash drive 8.1 with a file-way Win 7 -install.wim.

What gives us!

We all know that installing Windows 7, 8.1, 10 occurs in two stages. First of all, the Windows Preset Wednesday is loaded from the file. boot.wim., at this point we accept the license agreement, select the section for installation and click the "Next" button, then follows the second stage, the winder of Windows unpacks the contents of the main operating system file to selected by us - install.wim or install.esd.. So here you can use beforewindows 8.1 installation environment from Boot.wim file to install Windows 7 (file boot.wim in the Windows 8.1 distribution has USB 3.0 drivers), For this we andreplaced file. install.esd on Windows 8.1 File Flashinstall.wim from the Windows 7 Distribution And now our Windows 7, being on the Windows 8.1 boot flash drive, will calmly go through the first and second stage of installation on a new laptop with portsUSB 3.0.

Still be copied to the USB flash drive in the folder"SOURCES" windows Release Configuration FileeI.cfg. With content

Installing Windows 7.

Now everything is ready to install the system. Download our new laptop from the boot flash drive Windows 8.1 with file install.wim (Windows 7).

"Install"

As you can see, we will install Windows 8.1, but Windows 7, choose the desired version!

We accept the license agreement.

Selective installation ...

You can delete all partitions on the hard disk and install Windows 7 directly into unassigned space.

The usual installation process of Windows 7, familiar to you (I will not repeat).

Windows 7 is installed.

Installation of drivers

Using the Windows 8.1 boot USB flash drive with the file install.wim (Windows 7), we easily passed all steps of installing Windows 7 to a new laptop with USB 3.0 ports, but after installation, installed Windows 7 will not see USB ports 3.0, sincefile Image Install.wim (Windows 7) does not contain driversUSB 3.0. Also, after installation in Windows 7, other drivers will not be installed, but the touchpad will work.

We go to the device manager and see that the drivers on the video card, the Ethernet controller, the USB controller, the network controller, etc., were not automatically installed.

Connect a USB disk or USB flash drive with "Snappy Driver Installer" and DRIVERPACK Solution and nothing happens, the laptop does not see any flash drive nor a USB portable hard disk.

We do this. Download Laptop S. installation flash driveWindows 8.1 File Install.wim (Windows 7) in the preset environment andusing notepad as a conductor, toopen folders with driversSnappy Driver Installer and DRIVERPACK Solution From an external USB disk or in our case withflashki Directly on the desktop Windows 7.In the preset environment of Windows 8.1, all USB ports 3.0 laptop will work.

Go. Upload a laptop from the installation flash drive of Windows 8.1.

In the initial phase of installation of Windows 8.1, click the keyboard combination SHIFT + F10 and the command line opens.

First, we need to define a disk letter with installed Windows 7 and the letter of the disk of our flash drive.To determine the correct letter of the system disk, enter the NotePad command on the command prompt and click Enter. Notepad opens. Next, select the menu"File" and "Open".

Press the "Computer" button and enter the "Computer" window.

Select "File Type" and in the "All Files" drop-down menu

Operating system files find on disk (E :)

Folder with DriverPack Solution drivers find on a flash drive, a disc letter (D :).

Copy it.

We go to the disk (E :) with Windows 7 installed, we need a desktop.

In the "Users" folder, choose our username.

In my case, username 1.

And enter the "desktop"

On the empty place of the desktop, we click the right mouse and choose "insert"

Starts copying folder driverPack drivers The desktop of the Windows 7 operating system.

Copy will continue for 15 minutes. Exit the desktop and log in again if you see the folder DRIVERPACK on the desktop, then the driver is copied.Similarly, copy the folder to your desktop"Snappy Driver Installer."

Close the command line window and reboot, we enter the Windows 7 operating system.

Open the DRIVERPACK folder on the desktop and launch the driverpack.exe installation file.

The laptop configuration configuration is checked.

Choose Expert mode!

Mark all the drivers for installation. The very first to be installed the Intel's USB 3.0 Extensible Host Controller.

Remove the ticks from all utilities and click on the "Install Drivers" button

The process of installing drivers begins.

After installing the drivers, restart the laptop.

USB 3.0 ports should work.

In addition to the drivers, nothing was installed on my laptop.

To install drivers in Windows 7, you can also use the SNAPPY Driver Installer drivers

Open the folder on the desktop"Snappy Driver Installer "And launch the installation fileSDI_X64_R496.exe.

"Allow access"

Mark the necessary drivers and click on the "Install" button

After installing the drivers, you will need to restart.

At the end of the article, I note that what only the tricks sometimes do not go users to see the USB ports on the new laptop, although the USB 3.0 interface is inversely compatible with USB 2.0 and no problems when connecting flash drives to connectorsUSB 3.0 on a laptop with installed Windows 7 should not be (of course, in fact, everything often happens differently).

1. Disconnect the interface in the BIOS USB 3.0 - as a result it becomes still worse, in this case, even my way will not help.

2. Switches the USB operation mode with 3.0 to 2.0, the USB 3.0 Configuration option is responsible for switching (it is in the System Configuration tab) it must be set to AUTO, but this option is not on all bios.

3. Connect the USB 3.0 hub / splitter port to the USB 3.0 port to make the crutch - sometimes this method is triggered, because this concentrator has its own controller.