Charge charge does not charge. Why the iPhone does not charge to the end and what to do about it

To always stay in touch, do not forget to charge your smartphone in a timely manner. Unfortunately, sometimes mobile device It does not respond to a power supply connection. If you do not charge an iPhone, then the problem most often can be solved by simple actions. We also figured out why sometimes the iPhone is not charging from Power Bank.

Stick in the gadget cable.
The second end of the cable insert in:
- USB adapter sockets.
- In the USB port of the computer.
- Certified accessory: docking station or external power concentrator.

After that, on the screen, you must see the large image of the battery (in lock mode) or zipper in the status bar.

If the smartphone does not respond to charging - no zipper icon - or shows charging, but does not charge, first. Check the simplest reasons for malfunctions:

If the phone is completely discharged and disconnected, and then it does not turn on and does not charge - leave it on charging for 10 minutes. With a strong charge loss, the screen can remain black, without indicating the process.
Inspect and skid the cable for the elements, breaks and curved contacts. Use only certified wires. When suspected damage to the cable, try connecting the iPhone 4 to others.
Survey the smartphone port, especially if you wear an iPhone 7 or 6s with the Lightning connector without a closed cover in your pocket. Dust is easily forgotten into the port, short contact pad cable Lightning It stops tightly enter, and therefore the iPhone 6, 6s, 4 or another model does not charge. Solving the problem is simple - take the clean toothpick and carefully remove dust and villi. Additionally, blow the port of the air and connect to the power source.
If the iPhone 5, 6S or another model from the computer via USB is not charged, switch the wire to another connector. Part of the USB ports may simply do not work because of their breakdown or incorrect connection, so the PC does not see the attached gadget and does not respond to it.

If after all the checks still does not charge the iPhone 5, 5s, we are looking for the reasons further.

"Accessory is not certified"

In the fight against fakes, Apple engineers taught their products to recognize the authenticity of cables. For this, the plug is equipped with a special chip that tells the phone how it is going to be included in the outlet. If the iPhone stopped completely charged and gives a message about connecting a unattended accessory, change the cable to the original.

If such a message appeared when using a "native" wire, check its integrity, clean the iPhone port and restart the device.

Software problems

Another common reason why not charging - software failures. If errors occur in iOS work, the controller does not serve the command, and the charging does not go. The problem is eliminated by a forced reboot:

On the iPhone 7 and above: Press the inclusion keys and reduce the sound of the sound, hold 10-15 seconds before the apple logo appears.
On the iPhone 6S, 5 S and younger: Press the power and "home" keys.

And turn on, after which it will start response to charging.

When to go to the service ...

A number of problems can not be eliminated independently. If the powerovering controller was broken - the battery life of the battery was released, then you will have to contact the service. Signs of internal damage - the phone does not charge and does not turn on, quickly loses the percentage of charge, heavily heated or the iPhone shows that it is charged, but the charge is not added.

If you use the iPhone not the first year, then its battery will begin to sit faster. Over time, the gaps between recharge can significantly reduce - the problem will be replaced by the battery. Note that on the smartphone a non-removable battery, so you trust it with the change of service center. You can only remove the battery in the event that you can correctly disassemble and collect a gadget.

Charging from Power Bank

The reasons why iPhone from Power Bank is not charged, maybe several. First, check the condition of the cable and connect another device to charging. If everything is in order with the wire, and Power Bank does not recharge the iPhone 5S, 6 or the other, explore:

Current strength at the output: 1 A. required for iPhone
Use the original Apple wires, and not complete from the pan - too thin section reduces voltage and current strength.
The tank ratio of the external battery and the phone: for a successful complete charge, the capacity of the gadget battery must be 2 times less. In conventional iPhone installed batteries at 1700-1900 mAh, in the plus line - 2800-3000 mAh. Chinese Power Bank has real power may not comply with the stated.

If all the parameters are in order, but when connected, Apple's gadget is not charged, although other devices at this Power Bank adjusts it properly - the device is not compatible with your smartphone.

If the process of recharging goes, but extremely slow:

Unload the application from the memory of the smartphone - double click on "Home" and look up unnecessary programs. Skype, messengers, games, browser with open tabs - All of them are constantly spending the energy of the device. For acceleration, you can generally disable the phone.
Calibrate the Power Bank batteries and the smartphone - 2-3 times you need to completely discharge them, before turning off the device, after switching on, leave to load up to 100%. This will help you adjust the power controller and avoid accelerated discharge or sudden shutdown.

Conclusion

We figured out what to do if your iPhone is not charging from the charger or Power Bank. Most reasons are eliminated by the simplest actions - cleaning the port, changing the cable, rebooting the phone. If the phone sat down and refuses to turn on after all manipulations - carry it to the service where experts will be able to see and eliminate breakdown.

Consider the main reasons why your iPhone is not charging and what to do in such a shitzation.

Faulty charger

This is one of the most obvious, banal causes. Modern man Mobile lifestyle, constantly being in motion. Therefore, you have to wear a charger with you. Over time, due to improper storage, the protective cable sheath is damaged, barreling conductive information wires. Subsequently, they are shifted, which makes it impossible to recharge the battery. Check the probability of breakage simply - just connect charging to another similar device. If this is not at hand, contact service centerwhere the cable will be experienced free, and in cases of malfunction will be offered to repair or replace new.

Charging the iPhone includes another adapter for connecting to the network alternating current. His breakdown is rare, but still happens. It will not work independently to correct - you should contact the specialists. Check performance can be similar.

It is required to note one feature. Original charging apple devices Dear, but high-quality and reliable. Their operation guarantees the security of the smartphone. And they serve lon longer, which cannot be said about Chinese counterparts. They can break on the second day. The poor performance of the charging will result in voltage drops that burn the iPhone board. It is recommended to use charger from certified manufacturers.

Original charging have a built-in chip. Its presence has taught to determine the IOS operating systems. When contacting the cable without a chip, the corresponding message will pop up on the smartphone screen. Since iOS - closed softwareIt may incorrectly work with protocols unforeseen the firmware. This is another argument to use only original accessories.

Paul or dirty charger connector

Pollution

Many, for convenient access, wear a phone in his pocket, where there are a lot of villi, street dust and many other small substances accumulate. This leads to the fact that contacts of the Lightning port of the smartphone are polluted, which promises problems, among which the impossibility of charging the gadget is only the top of the iceberg. Theoretically, availability large number dust (perfect conductor) on conductive parts can lead to short closure.

Clean the connector is available at home. It is enough to use a simple toothpick. Just do not handle it with alcohol or other liquid - the quality of cleaning will not be improved, and it is quite realistic to damage the gadget. It is still not recommended to use metal objects, albeit small - high likely to damage one of the fragile contacts.

Breaking

Small pile particles or what other material can easily damage the "Breaks" port. It is enough just one faulty item, as charging will become impossible. To determine this kind of breakdown is available visually - the connector is well visible. If a curved or broken element is detected, then it is necessary to immediately contact the help of the service center specialists. Independent attempts to correct the situation will only exacerbate the situation.

Incompliance of the power of the charger

Here it will be not about the cable, but about the adapter. Its task is to convert the input voltage to the output power. Usually, the problem occurs when you buy a new charging instead of the broken one. Because of the ignorance of elementary physics, you can vain in vain throw money on the wind. The output power of the adapter is different: 0.5 A, 1 A, 1.5 A, 2 A, and so on. The capacity of the built-in battery needs to be viewed in the technical documentation for the phone, and then select the appropriate charging. From here, another malfunction follows.

Charging problems with personal computer

It happens when the phone is normally charged from the network, and not from the laptop or computer. No need to rush with conclusions and think about worst. The fact is that most USB ports have a 0.5 amp output power. This is extremely small for charging the iPhone. The process will start, but it will last long. Either this is or defective USB port. Check easy. Connect the charging cable to the backup connector.

Software malfunction

IPHONE iron is tightly connected to the operating system. Up to the point that the software fully controls the charging process. Inside the iPhone there is a special chip, which first serves a current when connected to the network, and then on the battery. This is done to protect the gadget from voltage jumps. When the network is in order operating system gives the command to the controller to skip the charge to the battery. But it happens that software freezes. You can solve the question in two ways:

Fully discharge the iPhone. Then the firmware will return to initial state And when connected to the AC network, recharging will begin.
Resort to "emergency reboot". To do this, you need to hold the "Home" and "Power" buttons at the same time.

Breakdown components

IPhone iron malfunction is rarely found, but permissible option. Types of breakdowns:

Battery.
Controller (microcircuit) Charging.

Determine yourself that it is not working properly difficult. Symptoms of faults are similar.

Not charging.
Too long charge.
Gadget is greatly heated.
Quickly discharged.
Does not define the control cable.

The controller, as mentioned above, is a microcircuit (chip), which, if desired, can be replaced with a new one. Again, this will have to contact the service center. There, experts are not first faced with this - replace the component for them a trifling case.

After repair should be verified in good condition. New batteries (Chinese) can work incorrectly or not at all. You should connect the phone right at the service center and make sure that the process went.

Multiple causes. Most of them are available to identify themselves. If the search did not give a result, please contact a service center. It will save money, time and nerves.

The problem may be in troubleshooting the charger, or something is wrong in the battery itself. In the event that the charging is connected, but the indicator reflecting this process does not appear - this means that the voltage does not go.

The main reasons why iPhone 5 is not charging

General error;
Malfunction in the charger;
USB cable does not charge;
It is impossible to enable and charge an iPhone;
Problems with a smartphone controller;
Problems with motherboard;

Total error - This situation is possible that after you connect the smartphone to the charger, a message appears that supposedly your iPhone does not support this device. This is a pretty problem. The reason for it is that a plume that synchronizes the computer and the charging has a malfunction. This plume begins from a special module located on motherboard And puts on with the socket (inside the phone). In this case, you need to visit the workshop. There, the fault will be eliminated in 15 minutes.

Fault in the charger - The malfunction is enclosed in the power supply. To check it, you need to connect the charger from another smartphone (but only the same model!). Why is the iPhone5 may not charge from his "native charging"? Maybe the socket is faulty, there may be constant voltage drops on the network.
Charging the iPhone just do not try to try to charge your 5th iPhone using power supplies from other manufacturers. The fact is that Samsungs or Nokia have other power settings, and an attempt to connect the iPhone through them can lead to even more sad consequences. So-born "Universal Charging". In fact, it is a cheap Chinese stamping, you should not trust, because on average after 30 charges they fail.

USB cable does not charge - When your smartphone is once again connected to the PC, but the indicator does not display charging, do not panic, and check whether the sleep mode is not enabled. If the computer arrives in sleep mode, or simply disabled, then there will be no charging. So it looks like a normal charging through a PC. But if the computer is turned on, and the charging is still not performed, check that the connection is made to which the connector. So charging will not be done if the secondary nest on the front panel is involved.

It should be noted that the original USB connectors did not think as sources for charging. The computer itself frequently switches the power and port modes, which is why the power form required for the smartphone can be interrupted. And if on the iPhone is included big number The application, then the PC simply will not have time to charge it. If it is impossible to charge through the dock of the cube, then it is possible to have a non-working connector. In the workshop will help you.

Unable to enable and charge iPhone "Nothing is eternal, that's the battery of the smartphone gradually exuded. How much he will serve, directly depends on how intensively you use it. With a large load, this can happen in a year (usually, after all, more than a longer period). In this case, again, it is necessary to go to the workshop. After a couple of hours you will already put a new powerful battery.

Another possible reason: fault in the controller (This is a device whose task is evenly distributed voltage throughout the smartphone) After a fall or impact, it is impossible to charge an iPhone if there was a sufficiently strong blow of the smartphone on a solid surface, then a defect may occur at the battery packing and motherboard. It is possible to detect a loop from the charger connector.
IPhone motherboard - Nothing insured from cracks and breakdowns in case of strong fall. Worst of all, if the crack is formed on the motherboard. In some cases, the iPhone simply stops turning on. In case you suspect this, go to the service center or in a good workshop. There will be a premium diagnosis, it is possible that the reasons for its faults are not at all scary.

The original cable for the iPhone has two weighty shortcomings - it is very unreliable and very expensive. And, of course, no one wants to give 1590 rubles (yes, it is so much the charging wire made at Apple factories) for a cable that a priori will not last long, and therefore many make a decision to buy a non-tax charge.

And now it is pretty sackomiv (prices for non-original cables start with 100 rubles!), Happy user returns home, but, no hope - connecting your iPhone to a new wire, he understands that the gadget is not charged and does not synchronize with iTunes, and on his screen is depressing Inscription - " This cable or accessory is not certified ... ". What to do in such a situation? Let's deal with!

What to say is there - the inefficient user is such a state of affairs, to put it mildly, discouraging. In his eyes, there is a mute question - "Well, where did my smartphone know that I didn't buy a charge for him in the App Store?!".

And, however, where does it come from? The opinions of specialists on this score diverge. Some argue that the reason for the integrated cunning mechanism built into IOS, which recognizes the original wire according to certain "beacons", the other that a special chip that signals authenticity is embedded in the charging itself. However, anyway, the fact remains the fact - Apple, as it should, took care that unoriginal cables do not work with the iPhone.

Not all are not original cables equally unoriginal

However, here is a paradox, on the Internet there are a bunch of users claiming - "I bought a non-rigging wire and everything works!". In fact, no paradox, just according to the "law" of Apple I-devices, can be charged not only from cables made directly with the "apple" giant - that is, the original, but also from those manufactured by partner manufacturers - it turns out the "detail" is non-original But has certification. On such charging wires there is a special labeling - MFI (MADE for iPhone).

Product quality marked by this honorary is controlled by Apple personally. And, by the way, from each manufacturer working on the MFI program, Apple gets, let's say "Tax". This fact leads to the fact that MFI charging cost more than those that do not have such labeling, but still not so expensive as original. The average price for a non-original certified cable - 500 rubles.

Where can I buy a MFI cable for iPhone? In general, in any good shop Electronics. Ask a consultant and help you.

What to do if the iPhone is not charging from the non-original cable?

However, back to our problem, the wire has already been bought and refuses to charge our iPhone or synchronize it from PC. What to do? Good news! Users have come up with a few "deceptions" for all-seeing Apple. Tell you about them all.

By the way, as you know the original Lightning is distinguished by the ability to work with a smartphone, which side does not insert it ( this feature Implemented according to the scheme, a special switch is installed in the cable chip), however, the non-rigid lightning may be deprived of such an option (the Chinese simply forget to take into account the aforementioned switch in the circuit), and so in order for the wire to start charging, it is possible that it is simply necessary to paste the other side.

"Close, close"

In some situations, so that the non-rigging cable began to charge is enough to do the following:

1 Connect the iPhone to the charger or PC - depends on the task - charging or synchronization. 2 When the window appears, the notification of the impossibility of working with the cable, tap it on the "button" - "close". 3 Now you need to unlock the device - the notification will appear again - again I tap "Close" and turn off the wire from the iPhone (do not block!), And immediately connect again.

Surprisingly, quite often this strange instruction helps. Are you not among those lucky ones? Then we try the following way.

Turn off and enable

This tricky iPhone method with a non-original cable is as follows:

Turn off the device.
We connect it to the outlet (if we want to synchronize with iTunes, connect to the PC).
Turn on your smartphone and ... Charging went!

By the way, if you now pull out the wire and insert back, charging / communications with the PC stops to resume it, the iPhone will have to turn off again.

Air mode

Some users, however, assure that there is no need to turn on and turn off the clearance smartphone, it is possible to deceive it and simply by activating the air mode. Moreover, it is sometimes enough to turn it on, to connect a smartphone to charging and, when, what is called, the process will go - you can turn off, but more often - all the time charging you need to keep the air mode active.

What is dangerous iPhone work with non-original cables?

Unfortunately, the fact that non-native cables do not charge the iPhone or are not synchronized to iTunes - not the main danger they are taking. Storubluble Chinese wires are made not according to standards, but because the proper balance of voltages and currents may not be observed, with the result that at best - the iPhone will be charged longer and / or discharge faster, in worst - will fail the power controller, which will entail Very expensive repair. For the fifth iPhone, this repair will cost, for example, dollars at 100, and this is not the situation when you can fix the device yourself.

However, we will not advise you to buy an original wire for 1590 rubles. No need to give mad money for the original, but also to buy to such a expensive gadget as an iPhone, risking it "health", Chinese cable for 100 rubles - just ridiculous, agree. What do we recommend? Stick to the golden middle and acquire a certified cable - acceptable price and quality assurance.

Why the iPhone is not charging from the original cable

Well, finally, consider another very interesting question. Sometimes discouraged users ask - "Why did my iPhone refuse to charge from the original wire, giving out a message" This cable is not certified? ". The answer is actually simple. Sometimes it happens if the cable is damaged or its contacts clogged.

Especially often, Lightning cables are subject to such a problem, which were first presented with iPhone 5. Charging wire for 4S and earlier models still had a more reliable design. So if the iPhone 5 does not charge from the original cable (well, or, in general, any other model), try using your cotton stick and alcohol to clean it. If it does not help, you have to buy a new one. Fortunately, you already know how to choose it correctly.

Suitable

So, if the iPhone does not charge from purchased neoriginal charging - This problem can be corrected. However, it is necessary to understand that the use of a non-rigid cable can incur a sad consequence. On the other hand, to buy the original wire is not very economical. Our solution is a certified cable with MFI marking - and not expensive, and guaranteed qualitatively! By the way, do you understand that MFI cables are forged too? So buying them, of course, it is only with reliable vendors!

Some owners of the technique of the famous brand EPL are faced with the fact that the iPhone does not see charging or charged one times. This product is quite reliable, but there are cases when for various reasons it fails. It is worth knowing that if the gadget stopped charging, various factors can contribute to this. In this article we will analyze possible reasons Gadget malfunctions and ways to solve the problem.

Why does the gadget cease to take charge?

The reason for which an iPhone is not charged may wage in the phone itself or in its charger. To find out, connect the gadget to a similar serviceable charging. If after connecting the charger it does not work, it means that the reason is still in the phone. An iPhone connector may be damaged as a result:

mechanical impact (gap or cable damage, blow, decline device)
contact with liquid
finding dust, fluff, garbage in charging connector

Among the reasons why the iPhone has ceased to charge, there may also be software failures. As a result of failures, errors arise and commands are not received by the phone controller for charging.

The port may fail due to negligent circulation, sharp movements when connecting and disconnecting the charging cord to the network. As a result of falling or impacts, it may be worthwhile:

power controller
clay connecting socket with a board
charging connector

Perform high-quality replacement of the loop and chip will not work independently.

If water fell inside the device, it can lead to corrosion of internal parts, charging port including. There is a chance to avoid breakage, if immediately after contact with the liquid you turn off the iPhone and you will not use it for several days.

If the phone often happens on dusty surfaces or in the pockets of clothing, the pile, dust, garbage and other small particles fall into the charge connector. This leads to an insufficient port of the port with the cable, as a result of which the iPhone is not infected.

The reason for the iPhone is not charged, the battery malfunction can be. Since the battery is calculated on a certain amount of Charge cycles may have exhausted its resource, and it's time to buy a new battery.

In addition, the use of non-certified chargers may fail the chip controlling the battery charge, the sleep button and the USB function. In rare cases, the use of an inappropriate cable leads to the ignition of the gadget. Cheap chargers do not stabilize the voltage on the network, which prematurely displays the battery.

Manifestations of faults

There are several obvious signs that indicate a charging chain malfunction in the iPhone. These include the following:

the phone is connected to the network, but the charge indicator does not burn (flashes) or shows incorrect data
the device turns off earlier than the battery fully charged
device stopped seeing charging
iPhone only works from the network
constantly flashing battery charge indicator
iPhone is charging if you move the cord in the connector

These features should immediately turn their attention, as they indicate that the iPhone charging is stopped. It should be repaired immediately.

What if the device fails to be charged?

To repair the equipment of the EPL, in particular, the iPhone, we need special knowledge and experience. But before contacting specialists, try to perform several elementary actions yourself. They can be useful in the case when the iPhone does not see charging.

First of all, check the iPhone port for the presence of dirt, garbage, foreign items. An invisible pile and dust in the connector can cause the device that the device does not charge at all or gets a charge. To resolve this problem, take an ordinary toothpick and carefully clean the connector through which the iPhone is charging.

If the iPhone charging does not work after the update or it stops charging sharply, try removing or disable the last installed software, after which you reboot the iPhone.

In the event that the IPhone does not work well or the gadget stopped working at all, reboot it. For this:

at the same time, press the "Home" and "On / On" buttons
hold both buttons for 15 seconds
wait for the shutdown and inclusion of the gadget

After restarting, the sound connection to the network should appear. If I stopped charging the iPhone and establish its work in this way it does not work, you need to try other methods.

If after a while after connecting the phone to the network, charging stopped charging, move the cord in the gadget connector. If the phone has begun to charge, then it is necessary to replace the connector. It is better to contact this problem to specialists.

Frequently cases of the fact that the charger (cable) of an iPhone comes into disrepair. To check it, try to charge the new Gadget company EPL. If charging does not occur, then the cable is damaged inside or outside. In this case, it is desirable to replace it with a new, high-quality.

To charge the battery "NOTOD" chargermay need to 12 hours, and it may seem that charging stopped working. Therefore, it is better to use the original device.