Where to disable automatic update Windows 7. Proper shutdown of Windows automatic update

For Windows 7, as well as for other operating systems of this family, updates come out with enviable regularity. It seems to be nothing wrong with their installation, because they are intended to correct the set of bugs in the OS itself and strengthening the system security. But this is only at first glance. As it is believed to be shutdown in Windows 7, it can be associated with a set of factors, including a shortage of free hard disk space, small throughput When loading packets, etc. Yes, and the updates themselves are not always recommended, since many of them (especially intended for other Microsoft products) are not needed by an ordinary user at all.

Windows 7 automatic update problems

However, all of the above far far not to fully displays the need to disable automatic update or removal installed packages updates. The most serious problem is that some updates themselves are unfinished, due to which a violation of the operating system itself is very often observed, and even with the impossibility of its subsequent loading or the appearance of the so-called blue screens of death. Another reason is the presence of unlicensed versions of the OS on the user computers, which, after installing the recommended packets, are started simply blocked. But delete such updates, cancel their installation or produce full shutdown The main service responsible for their search and installation can be very simple.

How to cancel the simplest way?

To begin with, assume that automatic update activated in system Settings By default, the user has not turned off, and the updates have already been set. How to remove automatic updates Windows 7 after performing all operations? Apparently, many users know that in the simplest case you need to roll back the system to the state in which it has been to install the latest packages (as a rule, Windows itself creates before installing backup With a point of rollback immediately before they are installed).

To do this, use the System Recovery Section in the Control Panel and start the recovery process with the choice or the last one or any other preceding point.

Manual removal of unnecessary or failure packages of updates

If we talk about how to remove automatic updates Windows 7 without using windows rollbackWhat can affect the program installed after their integration, you can apply another method.

It is to refer to the section of the programs and components, after which it is possible to select the viewing updates installed, sort them by the date of installation and delete manually. It seems to be simple. But here you need to clearly realize that if the "update center itself" himself and the service responsible for his work is in an active state, which, in fact, is, it still will be fulfilled after a certain period of time new search With the subsequent installation of the packages found. But more on that later.

Automated unintention updates

Alternatively, specialized defallator software can be used to delete installed packages like Iobit Uninstaller.

Their application is justified by the fact that they remove not only the packets of updates themselves, but also obey the residual components after their uninstalling in automatic mode (it will need to be included independently).

How to remove automatic updates in Windows 7 or another system once and forever?

Finally, we turn to deactivation of searching and installing updates, because without it, you want or not, attempts to search and install the operating system will still be undertaken. How to turn off automatic update In Windows 7, the simplest way?

For this, you need to enter the Windows Update Center section in the "Control Panel" section, and in setting the settings, disable automatic searchBy selecting the appropriate mode from the drop-down list, as well as remove the checkbox automatic installation Recommended updates. Along the way, you can deactivate the installation of updates and for other Microsoft products. In particular, it concerns office package. But that's not all.

Despite the actions taken, the main service is still in an active condition.

Now you need to call the Services section (Services.msc in the "Run" console), find there "Update Center", via a double click to edit parameters, stop the service and select a disconnected start type from the drop-down list.

Many users stop at this, but in vain. The fact is that to complete the search for the search and install updates, it is similar to deactivate two more services: " Windows Installer"And" Installer windows modules" Only after that you can make a computer restart and make sure that the search and installation of updates are completely disabled.

Note: For the last two components, it is also sometimes appropriate to install a manual startup type to avoid incorrect behavior of the operating system.

Additional update management utilities

How to remove automatic updates to Windows 7 with remedies, have a little dealt. As mentioned above, searching for updates even before disconnecting the main service can be performed again. In the case of the lack of need to deactivate updates upon completion of unnecessary or failure packages, immediately set manual search Available updates, and then exclude from the list found those that are not subject to installation, remembering the remote packet numbers. But such a procedure looks very laborious, especially since the updates can immediately establish. In this situation, the optimal option is the use of a tiny portable SHOW OR Hide Updates utility developed by Microsoft's specialists.

After the start of the application, you just need to select the Hide Updates item, after which the Windows 7 automatic update program will hide, allowing the operating system to ignore them when further search and installation.

Operating system updates are an important component of ensuring its performance and safety. However, in certain situations there is a need to temporarily disable this process. Some users fundamentally disable updates at their own risk. We do not recommend this without a real need, but, nevertheless, consider the main ways to turn off the update in Windows 7.

There are several options for disabling updates, but all of them can be divided into two groups. In one of them, the actions are made through the Windows Update Center, and in the second - in the Service Manager.

Method 1: Control Panel

First of all, consider the most popular among users the solution to solve the task. This method provides for the transition to Windows update center through the control panel.

Method 2: "Run" window

But there is a faster option to get into the control panel section you need. This can be done using the window. "Run".

Method 3: Service Manager

In addition, we can decide this task by disabling the relevant service in the Service Manager

Go to Services Manager either through the window "Run"or through the control panel, as well as using the task manager.
In the first case, call the window "Run"Pressing a combination Win + R.. Next, enter the command to it:

Click Ok.

In the second case, go to the control panel in the same way that was described above, through the button "Start". Then visiting the section again "System and safety". And here in this window click on the name "Administration".

The third option to go to the Services Manager provides for the use of the task manager. To start it, you type a combination Ctrl + SHIFT + ESC. Or click right-click on the taskbar located at the bottom of the screen. In the context list, choose the option "Run Task Manager".

After starting the task manager, go to the tab "Services", then click on the button with the same name at the bottom of the window.

Then the transition to the service dispatcher. In the window of this tool, looking for an element called "Windows Update Center" And allocate it. Move into the tab "Advanced"if you are in the tab "Standard". Labels tabs are located at the bottom of the window. In the left part, click on the inscription "Stop service".

After that, the service will be completely disabled. Instead of inscription "Stop service" In the appropriate site there will be an inscription "Run service". And in the status of the object of the object will be disappeared "Works". But in this case, it can be automatically started after restarting the computer.

To block her work, even after restarting, there is a different disabling option in the Services Manager.

In this case, the service will also be disabled. And only the last type of shutdown will ensure the warranty that the service does not start when the computer is next restart.

There are several ways to disable updates in Windows 7. But if you want to disable only automatic, then it is better to solve this task through the Windows Update Center. If the task is to be fully disconnected, then a more reliable option will be stopped the service completely through the service manager by setting the appropriate startup type.

Even in the Windows XP operating system, the developers have entered a special service that was responsible for periodic updates. They automatically downloaded over the Internet from Microsoft servers to the user's computer, and the system determined - to set them at the request of the user or automatically. Consider why they are needed, and how to disable Windows 7 update.

What are they needed for

According to the creators of the system, fresh updates have a positive effect on the work of its program code. They specially work on improving and optimizing computer processes in the system. As a result, all efforts are designed to increase the speed. The computer must become more responsive, and various flaws and errors disappear. More often updates give new opportunities:

improve diagnostic and troubleshooting tools;
contemporary peripheral equipment is supported;
new features are added in the system;
patchworks for Windows security and other utility are added.

For those who have a Windows licensed system, installing such updates, as a rule, does not threaten anything.

But, based on the bitter experience of many owners of computers, these updates are needed only if they are able to bring real benefits. But who from ordinary users will be able to determine the usefulness of Microsoft improvements in advance. If some game or the program works unstable in this operating system, then it will report exactly which updates are needed. But when the computer works reliably, stably and does not give up unexpected glitches, then what's the point of being updated, if he works smartly. As admines are joking: "It works - do not climb," but it is better to completely disable Windows 7 updates. Often they can deliver a lot of problems. Why risks, and whether you are lucky.

Why may you need to disable

The reasons so that such a question arose how to disable automatic update in Windows 7, several:

The user has a pirated version of the operating system. And if you completely disable the update, the risk that Microsoft will give a "red card" and limits the operating system functionality for using non-licenseone Windows 7, just comes down to zero.
There are no cases when the updated system unexpectedly issues critical errorfix that can only full recoveryAnd wonder how to disable the auto-update of Windows 7, it is clearly late.
The small size of the system disk, most often this disk "C". And since packages with fixes are very voluminous, then free place instantly disappears. Therefore, it becomes just necessary to prohibit automatic updates on your computer.
The need to wait for a computer shutdown after the update in Windows 7. Those who were updated came to the situation when the laptop is turned off, and a warning appears on the monitor screen that it is impossible to do that, since "is required to install updates on Windows 7 1 of 1235 "! And the user must choose or updated system, or strong sleep. Here you will unwother think about how to prohibit the system to be updated.
If the Internet is limited to incoming and outgoing traffic. For users, the question is also relevant how to disable the automatic update of Windows 7.
If the Internet channel has a little speed, it is better to turn off this service in Windows 7 forever.

If at least one of the above reasons is relevant for your system, then Windows 7 updates are better not to search.

Well, now about how to disable updates. There are two ways. Consider each of them separately.

Turn off completely

Before turning off Windows 7 Update Center, it is necessary to find Management service. Consider a sequence of actions:

After completely disabled this service, the system will not be updated. But if you want to receive Windows 7 updates, if you have all actions again, the full functionality can be restored by changing the settings.

Turn off the automatic update

If you want to leave the right to download and install updates manually, you can restrict ourselves to the automatic search.

Consider how to do it:

Now the update search system will be executed, but it will not automatically install without user permission. The owner of the computer can do at any time. manual loading updates from the download center by clicking on the button Check updates.

Turn off system notifications

After actions, the search for updates and their installation in automatic mode will not be carried out. But that's not all. Since for Windows 7 is an event from a negative category, it will still remind this flag with a red cross in the right corner of the monitor.

Disconnect this reminder of the changes carried out:

Now the red cross disappeared, and the operating system does not display reminders.

But nothing bothers if you wish to upgrade and manually. It is enough to start searching for Windows 7 updates.

Conclusion

Finishing this small description of what the UPDATE system needs to do, and how to disable the update service, we want to remind you that each user can set the update manually, and also disable the update service is completely either partially. We hope to help you brief instructions. They are completely simple, but they will retain the performance of the computer for a long time.

Video on the topic

For operating room windows systems 7 Tital is periodically updated. New additions are designed to improve and optimize computer performance. However, sometimes the operation occurs not so successfully, as expected, and the system begins to "hang." In addition, users often note that during the download of additions, the lion's share of traffic goes to this process. That is why the question is often the question of how to disable auto-update.

How to disable automatic update

In order not to give the system to automatically update, you need to click on Windows 7 with the right mouse button on the computer icon. From the list that appears, select properties. In the lower left corner there is a link of the update center that we need to open.

Here we are interested in setting the parameters. Select the string in the menu, which states that it is not recommended to look for updates. I confirm your choice by pressing OK. Now the automatic update search is disabled. Those interested in how to disable the Windows 7 auto-update in safe mode, it should be noted that the actions must be done the same. But I note that safe mode Used if you need to solve any problems that occur with the computer. For example, to delete updates that led to errors.

After you have disabled automatic additions, the system will constantly remind you about it. At the bottom of the screen, a message may occur periodically that the computer is in danger. In order to get rid of yourself from such reminders, click on the checkbox icon, located next to the date and clock. Here we choose the opening of the support center. In the User window that appears, it should be noted that it does not want to receive messages about the system updates.

It should be said that supplements are a recommendatory. In other words, without them it is quite possible to do. However, often they really help to optimize the operation of the system, so it is not very desirable to disable the receipt of updates. Although there are additions that lead to not very successful consequences. These are usually unfinished applications, due to which the system can start incorrectly to interact with rAM or other important elements of the computer. In this case, you will need to roll back the OS to such a point when the additions have not yet been installed.

Computer update is an important process. But sometimes it is lost any meaning. Today we will try to figure out how to disable this service, according to many users, harm brings more than good. After all, it's no secret that sometimes the files that violate the system are installed in the computer. Errors with great difficulty are corrected. Sometimes it can be even done only by reinstalling the operating system. So you have to think well, how to turn off Windows 7 updates and in general to get rid of some already file installed.

Services

Event development options can be offered several. The first is perhaps the most difficult. More precisely, it is just a non-standard. And the novice user will cope with him will not be so easy. The thing is that 7 "is in the" Services "section, and to get rid of this process, you will have to look here.

Go to the "Control Panel". There it is necessary to look into the "System and Security" folder, "Administration", and then click on "Services". In the window that appears, browse the entire list of application and processes. The one needs us is usually located at the very bottom.

How to disconnect the update center "WINDOVS 7"? To start, find the appropriate line in the system services and double-click on it. You will have a window with a choice of parameters. It is worth setting "disabled" in the start type. After click on "Stop". And only then you can click on "OK". The action is completed.

Disable check

In principle, often users simply choose a simpler version of the development of events. Just turn off automatic check updates to get rid of yourself from unnecessary problems. An even starting user can cope with this task.

How or rather, the center responsible for this process? Go to it using a system tray, and then go to "Setting the parameters". You will have a window in which you can select the type of checking all updates. There you will see two graphs - "important" and "recommended." How to disconnect the update center "WINDOVS 7"? In the first case, in the first case, set the parameter "Do not check" (it is marked with a red shield and signature "not recommended"), and in the second - remove the checkbox. You can confirm your actions. The problem is solved. Automatically program will no longer work. All updates can be downloaded manually during self-inspection or forget about this application. As you can see, nothing complicated in it.

Cancelled

True, it is not always necessary to completely abandon the update center "WINDOVS 7". Sometimes it is enough to get rid of some potentially dangerous for a system of files that have already been installed. But how to cancel Windows update?

Make it pretty easy and simple. Go to the update Center and select "View update log". In the appeared window, at the very top, the inscription will appear " Installed updates"Now you should click here. And then you will be in service where you can get rid of all installed files. Just we need.

Now everything that will be needed is to find it. files updates and then highlight them. Click on the right mouse button, then select "Delete" in the list that appears. Agree with a warning and click on "OK". A few minutes of waiting - and all problems will be solved. Next, do not forget to disable updates check. Just forbid it, otherwise the result from the process will be almost useless.

Pirate version

True, there is another rather interesting and easy way to solve the issue. You thought about how to disable the update center "Windows 7" times and for all, and do not plan to use it in the future in principle? Then you can simply put yourself a pirated version of the operating system. There, as a rule, this service is in principle disabled. Or it is not available at all.

In truth, it is this option that attracts many users. Especially those who are used to use unlicensed operating systems at all. The settings of the installer are trying to save the public from many problems. Therefore, in some, the update center is not entered into the list of available system services. Not the most honest and legal version of the development of events, but it takes place. And, as already mentioned, this approach enjoys with great demand.

RESULTS

So we figured out with you, how to disable the update center "WINDOVS 7". As you can see, several options. This is a complete shutdown of the application, or work with the program settings, or delete already existing "dangerous" files with changes in the configuration center. In addition, there is also an option to install the operating system without this service.

What kind of approach to choose - decide for yourself. In any case, remember that you should not immediately choose the "piracy" method. Such operating systems And without that very many mistakes and troubleshooting. It is better to take advantage of some more honest techniques.