Periodically, the blue screen appears. What to do if the computer starts to load and at some stage a blue screen appears (bsod)

Blue Screen of Death, he is bsod and blue screen death is Windows Reaction on critical errors In the computer. On the screen, white inscriptions appear on the screen on a blue background, after which the device is usually rebooted, freezes or turned off.

After restarting, the system works normally for a while. But then, if you do not fix the error, BSOD appears again.

Sometimes this state leads errors in the drivers or failure of the computer hardware parts. Causes can also be in failure system settings, viruses or even installed programs.

What if the blue screen of death appeared

You can help special services built into the operating system.

If you have Windows 10, open the Start section → "Parameters" (gear) → "Update and Security" → "Troubleshooting". Scroll through the list of available services at the very end and select "Blue Screen". Click "Run a troubleshooting tool" and follow the system prompts.

If you have more old version OS or the above-mentioned tool did not work, open the Windows Control Panel and go to the Security and Service Center section. In some versions, this path may look like this: "Control Panel" → "System and Security" → "Support Center".

Expand the "Maintenance" tab and check whether recommendations are displayed here to solve Windows problems. If so, use the proposed advice.

If nothing helps, go to the next item.

At the appearance of a blue screen of death can be hundreds of various reasons and each has their own ways to solve. Learning the cause of BSOD on your computer, you can find the best way to eliminate the problem.

On the screen windows death Displays the code that caused its error. It may look like a set of numbers and letters (0x0000000F) or a combination of different words written in the upper case and frequently related handles (spin_lock_already_owned).

You need to enter the error code in the search engine and thus find the individual correction instructions. On the blue screen, there may even be a special QR code. Scanning it through mobile deviceYou will get to Microsoft's website with an interactive assistant solution.

If immediately after the blue screen appears, the computer restarts and you do not have time to write the error code, turn off the automatic restart. To do this, right-click on the "Computer" icon and select "Properties" → "Advanced system parameters". In the window that opens, go to the "Advanced" tab, click "Parameters" and uncheck the "Run automatic reboot».

If you do not want to look the desired instruction And to delve into it or the solution found in the network does not help, use the methods listed below.

3. Try simple universal measures.

These general measures affect many system parameters and help restore its normal operation. Including they can correct errors that lead to a blue screen of death.

In the system settings, go to the Center windows updates"And check for updates. If they are available, install them.
Check the system using.
Update drivers. You can go to the manufacturer's website of your computer and download all drivers for self-installation. But you can use and free Services like

Most users have come across a close interaction with the computer with a sudden completion of the system, accompanied by a blue screen with incomprehensible information. This is the so-called "BSOD"And today we will talk about what it is and how to deal with him.

BSOD is an abbreviation, literally meaning the "blue screen of death". It was impossible to say more precisely, because after the appearance of such a screen, further work is impossible without rebooting. In addition, such behavior of the system speaks of quite serious problems in software or hardware PC. BSODs can occur both when booting a computer and during its operation.

Error options prescribed in blue screens, a great set, and we will not take out each individual here. It is enough just to know that causing their causes can be divided into software and hardware. The first are faults in drivers or other programs that are closely related to the operating system, and the second - problems with RAM and hard drives. Wrong bIOS settings, for example, incorrect values \u200b\u200bof voltage or frequencies during acceleration can also cause BSOD.

Most of the special cases are described on the site bsodstop.ru.. To work with this resource, it is necessary to figure out the data structure provided by the system.

The most important is hexadecimal error code specified in the screenshot. This information should be signed on the site.

In the event that the system is automatically rebooted, and there is no possibility to read the information, perform such actions:

Now when the BSOD appears, the reboot can only be performed in manual mode. If it is impossible to access the system (error occurs during download) You can set the same parameters in the boot menu. To do this, when starting the PC, you must press the key F8. or F1., and then F8., or Fn + F8.. In the menu, you need to select the disabling automatic reboot during failure.

Cause 1: Drivers and Programs

Drivers are the main reason for the occurrence of blue screens. It can be both firmware for hardware and files embedded in any software. If BSOD occurs exactly after installing software, then the exit here is one - to execute "rollback" to previous state Systems.

If there is no access to the system, then you need to use the installation or bootable carrier with the version of the OS recorded on it, which is currently installed on the PC.

Read more: How to create a bootable USB flash drive

Carefully monitor the behavior of the system after installing any programs and drivers and create manual recovery points. This will help correctly determine the causes of errors and eliminate them. Timely updating of the operating system and the same drivers can also get rid of the mass of the problems.

Read more:
How to update the operating system

Cause 2: "Iron"

The hardware problems causing BSOD are as follows:

Disadvantage free space on the system disk or section
You need to check how the amount of drive is available for recording. This is done by the right click on the corresponding disk (partition) and the transition to properties.

If there is little space, that is less than 10%, you need to delete unnecessary data, unused programs and clean the system from garbage.
New devices
If the blue screen occurs after connecting new components to the motherboard, then you should try to update their drivers (see above). In case of failure, you will have to abandon the use of the device due to the possible malfunction or inconsistency of the characteristics.
Errors and broken sectors on hard disk
To identify this problem, you should check all drives for the presence of problems and if possible to eliminate them.
RAM
Faulty strips "RAM" are very often the cause of failures. You can identify the "bad" modules using the program.
Overheat
BSOD can also be caused by overheating of components - processor, video cards or components motherboard. To eliminate this problem, it is necessary to properly determine the temperature of the "iron" and take action on its normalization.

Cause 4: BIOS

The incorrect settings of the motherboard microprogram support (BIOS) can lead to a critical error of the system and the appearance of a blue screen. The easiest solution in this situation will be resetting the parameters for default.

Cause 3: Viruses and Antiviruses

Viruses that have fallen on your computer can block some important files, including systemic, as well as prevent the normal operation of the drivers. You can identify and eliminate the "pests" using free scanners.

If the virus attack closed access to the system, then perform this operation will help recorded to removable media. Scanning in this case is performed without loading the operating system.

Antivirus programs can also behave in an inappropriate way. They often block "suspicious" system files responsible for the normal operation of services, drivers and, as a result, hardware components. You can get rid of the problem by turning off or removing antivirus.

Blue Screen Features in Windows 10

Due to the fact that Microsoft developers are trying to limit user interaction with system resources, the informativeness of BSODs in Windows 10 has decreased significantly. Now we can only read the name of the error, but not its code and the names associated with it files. However, in the system itself, a means appeared to identify and eliminate the causes of blue screens.

We go B. "Control Panel", Calling a string "Run" Combination of keys Win + R. And entering the command
Switch to display mode " Small badges » and go to the applet "Security and Service Center".
Next, go on the link "Troubleshooting".
Open a block containing all categories.
Select item "Blue screen".
If you want to immediately fix the problem, then click "Further" And follow the prompts "Masters".
In the same case, if you need to get error information, click on the link "Additionally".
In the next window, remove the checkbox near the inscription "Automatically apply corrections" And go to the search.

This tool will help get detailed information about the BSODE and take appropriate actions.

Conclusion

As you can see, the elimination of BSODs can be a fairly complex and requiring large number time. In order to avoid the appearance of critical errors, update the drivers and system in a timely manner, do not use dubious resources to download programs, do not overheat the components, and read the information on the profile sites before acceleration.

Anyone who comes out daily with work on a computer, met with a blue screen problem with white text. You can get rid of it only by rebooting the computer. This is called: "Blue Death Screen". Why it appears and how to eliminate these reasons, we will analyze in detail in this article.

Where did this name go

IN modern systems Windows is given The screen has already been made not in the form of blue with white text. Now it depicts, for example, on Windows 8, the expression of a sad smile. It often flies when new operating systems are tested. But this is the most innocuous version of its appearance.

In the first versions Windows Vista. These were red screens. And during the use of early versions of Windows 1.0 and 2.0, the screens were black. The generally accepted name of the blue screen of death was introduced by the employees of the California company Eric Naours in 1991.

Why is the blue screen of death? This concept came to us from English. The phenomenon itself, as a result of which it appears, sounds like "Stop Error", which means: "Stop because of the error." And the blue screen of death is a translation from Blue Screen of Death, abbreviated BSOD.

Thus, displaying this screen to your monitor, the Windows operating system tells you about the critical error. Due to its occurrence, the system is not able to continuously work and is forced to stop.

An error is displayed on a blue screen with white text describing its STOP code. According to him, it is possible to find out the reason for its occurrence, which means you know the ways to eliminate. The code is an entry in the form of a hexterior number system having a 0x prefix. They are used by system services in the programming language "C". Such a BSOD code can only recognize a competent specialist in this area. It is used in Windows XP / Vista / 7 / Server 2003 operating systems. Site technical support Microsoft contains detailed descriptions of all errors and clarifies why the blue screen appears in connection with each of them. After all, to accurately find out the cause of the error, it is necessary to correctly recognize its parameters.

Why blue screen crashes

The factor of the operation of the operating system can be a lot. Mostly the reasons why the blue screen of death appears, critical errors are. They arise during the execution of the core code or the driver in the kernel mode, when the further functioning of the operating system is impossible. We will analyze these reasons more.

The blue screen crashes, for example, when some components, a video card were replaced, hDD, audio adapter or devices in pCI slots. As a result, the drivers installed for these devices may be incompatible with an existing computer configuration. Here and the impossibility of further continuing the system and STOP ERROR occurs, that is, it stops for the error. As a result, BSOD is displayed to the user on the screen, on which the whole problem is described in detail.

In such situations, only a reboot can help. As a result, it is loss of all user incomparable data, which means that the installed conflicting packages of the drivers occur.

Blue screen can be called by pressing a specific key combination. This can happen by randomly with the wrong handling of the keyboard. For example, there are lovers to fold various items and packs with documents on it, or the child playing with it can press the combination of "hot" keys to call BSOD. In such a situation, an artificial blue screen caused does not carry error information, since they did not occur. System equipment uses this function to identify problems affecting the process of operation of the computer system. A frequent intentional BSOD call can lead to loss of information and malfunctions in the operation of the operating system. Therefore, it is necessary to be neat in handling the keyboard.

Actions when the blue screen appears

As already mentioned above, when the blue screen appears, you must restart the computer. If it did not help, and the error comes out again, then you need to look for the cause of the problem. Consider cases of bsod and troubleshooting.

If you have changed changes in the settings bIOS systems Errors may be made claimed by a blue screen. In this case, you need to set the default settings, that is, to select Default. Then the BIOS system will be reset to factory settings.
There are viral programs, the purpose of which is the defeat of the boot record of the MBR and the boot sector. To do this, launch a reconnaissance disk that has a functioning antivirus and scan the system. Such distributions can be downloaded from the official websites of companies involved in antivirus developments. In addition, exist special utilities To check and edit boot records. Using that software, You can adjust the MBR by laying a computer into a working condition.
Often the blue screen of death appears when malfunction or incompatibility of the modules random access memory. In this case, the rules should be installed in other slots, change places, or try to install them one. In the latter case, you can identify a faulty module. You can also identify errors that occur due to problems in RAM, you can use utilities for testing it. For example, a staff means under by the name of Windows Memory Diagnostic.
Problems with hard disk Can lead to the appearance of a blue screen. In this case, the HDD should be checked using the standard utility Windows Chkdsk.. It creates troubleshooting errors, and also engages in the restoration of damaged sectors. If after use Chkdsk Error It is still displayed on the screen, the deeper HDD analyzes should be applied using specialized utilities, for example, from Acronis.

Prevention of blue screen

In order not to deal with the problems of the blue screen, there are several simple rules when working with a computer.

Do not install chaotic software unknown to you.
An antivirus must always be installed on your computer, which is regularly updated.
It is necessary to periodically clean the operating system. Since "residues" from once installed, then remote programs accumulate in its system folders.
Use the driver packages for components, downloaded only from the official sites of the manufacturers of "iron".
Computers are certainly stolen. Developers of new components stop supporting old. And therefore, for this reason, the incompatibility of software new products and outdated drivers may occur. Periodic upgrade of the configuration of your computer should be performed if you wish to use modern software.

Now you know why the blue screen flies. But remember that with a frequent appearance, you should definitely contact a specialist. After all, inexperienced self-treatment harms not only to people, but also technique.

Almost any user had to be encountered, it is certainly to hear about such a thing as the "blue screen of Windows death". This topic is extensive, so read carefully! We will discuss the article that there is a blue screen of death, what to do in this situation and of course I will try to show everything clearly. The name of this phenomenon was invented that it was necessary - frightening and memorable. In today's article, it will consider in detail the reasons for the occurrence of the blue screen of death, as well as possible solutions This problem.

The blue screen of death is a serious problem that drives into a stupor of PC users. Before you begin to read the article, I recommend to postpone all your affairs and that no one distract you. If you understand the essence of the occurrence and solving this problem, then in practice it will be much easier. I have repeatedly applied to this problem and even there were such situations when administrators did not know what to do when the blue screen occurs. In return, they said to users that need to replace the system unit, completely. WHAT? If you were so told, then remove the noodles from the ears and read the article to the end.

What this error

As a result of a malfunction, the operating system (OS), being unable to correct the error independently, is unrelated to work. Naturally, no user data is saved ( open documents etc.). The only thing that has time to do is to make Windows: record information in the log and create a dump file if the settings indicate the creation of this file when such errors occur.

To avoid unfair accusations to the Windows address, I will immediately make a reservation: the blue screen of death does not appear without serious reasons, and the completion of work in such a situation is the only way out.

The blue screen of death is as follows:

From the screenshot, I think it is clear from where in the title the word "blue" took. As for the "death", then there is due to the death of the operating system, that is, its imminent reboot, and in some cases and reinstalling. In practice, most of the causes of blue death screens are successfully eliminated without reinstalling the OS, provided, of course, timely and correct response. Most importantly, you need to understand where the legs grow from. I mean that if you do not know because of what the blue screen of death appears, it is difficult to solve the problem.

What does Windows tell us on the terrible blue screen of death?

To facilitate perception, I conventionally divide it into several blocks and I will describe each separately (for those who know englishThe independent understanding of the most part will not be difficult).

1. Here, Windows reports that the problem is found, and to prevent damage to the computer, I had to accidentally complete the system.

2. It indicates the type of error. There is a limited number, and for each such error, on the Internet you can easily find information.

3. In this part of the OS reports possible reasons The occurrence of the problem, and also gives some recommendations to troubleshoot.

4. In the TECHNICAL INFORMATION name section, the error code is specified, as well as the name of the name problem Driver (Read more below).

After familiarizing the blue screen, you must understand what this error or learn about the file that can be listed on the screen.

Causes of the blue screen of death

The blue screen of death may appear for various reasons.

The most common cause is drivers. This includes incompatible with each other or with the operating system drivers, and other failures associated with them.

In this case, I have a small story, this information not only so that you read it and forget !!! With this story you will learn how the problem with the blue screen is solved.

Once I worked as an administrator assistant and served a park of 80 computers. Almost 20 computers from time to time the blue screen of death appeared. When I asked a question to the administrator about the reasons for such a misfortune, he only shrugged and said that he didn't understand what's wrong with something (I think I just didn't want to understand). After his answer, I wondered to find the essence of the problem.

The first thing I looked, which error appears on the screen, then recorded the error code and the name of the file to which the blue screen of death indicated on the leaf. A little confusing on the Internet, I found out that this file is used for Wi-Fi adapters. After that, I made a small bypass of problem computers, and made sure that they all really work on the network via Wi-Fi adapters.

Next, I decided to find out which drivers install the administrator when connecting these devices. His answer I drove me in a dead end. It turned out that he installed the drivers that came with the equipment. After that, I spent 2 hours, but still found the topic of interest to me on the Internet. It turned out that these devices are buggy with standard drivers.

Strange, because the company D-LINK is considered one of the best, and in fact it turns out that it supplies the drivers to adapters that do not work with them. On the forum of the manufacturer D-Link by that time the topic was already created with a similar problem. And for about 2 years, this problem exists in many users of these adapters.

To exit from our situation, it was decided to use other drivers (from other developers). We set them on a problematic computer and asked the user must notify us in case of the appearance of a blue death screen. Of course, I did not know what drivers installed instead official. After reading all the topics on the forum, I found a dozen reviews that have tried another driver (I don't remember anything now) and they solved this problem.

A few days later, he never called, did not go to us, it means that no problem arose no longer! Making sure that everything is fine with his computer, we installed all computers this driver and users sighed with relief.

Problems with computer hardware.

Often problems with the "hardware" are rather a consequence, but the reason may be overheated by components. It also includes independently problems of equipment, RAM or hard disk.

Problems with programs.

The death screen can cause antivirus applications and various emulators. Also, the reason for the appearance of the blue screen of death becomes viruses, it happens not often, but also occurs.

What do we have to do

First, you need to prepare in advance for potential problems. Windows is configured by default so that only a couple of seconds the Death screen appears, after which the computer automatically reboots.

However, this does not give us the opportunity to have time to write error data that it does not suit us at all.

Note: If it does not restart automatically, use the POWER button.

We will be enough to configure Windows so that it does not automatically reboot. Thus, we can understand why the blue screen of death appears. Since in this error you can read the error code or file that is to blame in a blue screen of death. After that, we will help the Internet. For this setting, you must perform the following actions:

In Windows XP.: "Start" - "Setup" - "Control Panel" - "System" - "Advanced" - "Download and Recovery" - "Parameters" - "System Failure". In the window that appears, you need to remove the "Automatic Reload" checkbox, and select the "Small Dump of Memory" in the "Debug Information" block, and click OK button.

In Windows Vista / 7: "Start" - "Control Panel" - "System and Security" - "System" - "Advanced System Parameters". In the window that appears, select the Optional tab, the "Download and Recovery" tab, and click the "Parameters" button, it remains only to remove the "Automatic reset" checkbox, turn on the small memory dump and click "OK".

Also, you can get to this window by pressing the "Computer" button - select "Properties" - on the left of clicking "Advanced System Settings" - go to the "Advanced" tab - for me this method seems easier.

Secondly, at the first appearance of the blue "Nef State", you need to record data from a blue screen on paper. These data can help in finding the cause of the problem.

Well, thirdly, let's show how to remove the blue screen of death.

It should be understood that the death screen is much more likely to appear after any user actions than in itself. Therefore, the first thing you need to take is to try to return the computer to the state in which he worked stable.

If there were no special manipulations with the computer, that is, you just worked, and suddenly "he" appeared, you will have to look for answers on the Internet. Since the most common cause of the appearance of BSOD is drivers, then the priority is the search for the name of the failed driver.

If the information was indicated on the screen of death, then in this case we need to find only the description of the error or the problem that the driver caused. To do this, simply enter in any search engine The name of the failed file known to us. Thereby learn what this file is. For example, if this file is needed for the video card, it means you need to delete video card drivers and download a new one with. manufacturer's website.

Otherwise, the search must be started with the data that you copied manually. Using this information, you can roughly navigate in possible causes. If nothing useful to find out, we turn to the analysis of the memory dump.

Do not install various assemblies that made incomprehensible authors. If you even advised the neighbor uncle Vasya to install his assembly, then you are my advice - DO NOT DO THAT! It is better to establish a full-fledged original Windows distribution and you will be happy.

If the problems with the drivers were not identified, it is necessary to check the hardware components of the computer, which may be the cause of the blue screen of death. First of all, this is the RAM, hard disk or overheating of any components of the system (video card or processor). To check the temperature you can use the AIDA program.

If you think that the problem with the hardware is, then lend this item from your computer from his computer and install on your own. Make sure that it is this item that works unstable on your computer, you can then buy it in the store.

To check RAM, I recommend the MEMTEST86 program, and to check the hard disk Victoria program (a detailed consideration of the work of these programs will describe in individual articles). In addition, it will not hurt to conduct a complete check of viruses, pre-updating the virus signature database.

Let me remind you that the dump is a file that is created at the time of the problem occurs and contains detailed description The state of the system at the time of the error occurs, and, it means, can tell about the reason for the appearance of the failure.

Let's imagine this situation when your friend has a blue screen of death. He does not understand what it is and because of what the blue screen of death appeared. Naturally, he turns off the computer and trying to find out from friends what it was. Of course, he did not record anything on the leaflet, that is, he does not know what was written, but as you already know to solve this problem you need to know why an error has appeared.

Just for this there are special programs with which you can find out what the reason was. Now, even if you are in another city, you know how you can help your companion. To view the contents of the dump, you can use the Debugging Tools for Windows or BlueScreenView programs.

Let's take the example of the BlueScreenView program, let's deal with how to see dumps. You can download the utility by reference. If you need information from the official site, here's the link http://www.nirsoft.net/utils/blue_screen_view.html

Now run the file "BlueScreenView.exe".

If there are no lines on top, it means there were no failures on your computer.

I did not have a blue screen of death and therefore I had to borrow it;). So, now we have a dump, with which we will understand how this program works.

To specify a dump that I have, you need to make changes to the program. To do this, click "Settings" - "Additional parameters" or "CRTL" + "O".

Click "Overview" and specify where our dump is located.

Note: If the program is on a problematic computer, you do not need to change anything.

Now we see what files caused an error. Click on the row by right mouse button and select "Properties".

How to install the driver and what is the driver. "

I hope now you will not have difficulties in solving the problem of the blue screen of death.

See you soon!

Mandatory video for viewing, because there is something to not tell about what:

Blue Screen of Death, BSOD is a critical system error in Microsoft Windows operating systems. When this malfunction occurs, the system hangs and the data that has been changed during operation is not saved. It is one of the most common in the operating room windows system 7. To eliminate this problem, you must first figure out the reasons for its appearance.

The reasons due to which the BSOD error appears, can be divided into 2 generalized groups: hardware and software. Hardware problems are problems with the "hardware" in system block and various components. Most often, malfunctions arise with RAM and hard disk. But still, malfunctions and other devices are possible. BSOD may arise due to the following hardware problems:

Incompatibility of installed equipment (for example, installation of an additional plank "RAM");
Breakdown of components (most often fail or RAM);
Incorrect acceleration of the processor or video card.

The program reasons for the appearance of a problem much more extensive. A failure may arise in system services, incorrectly installed drivers or due to the action of malicious programs.

Unsuitable drivers or conflict of some drivers (incompatibility with the operating system);
Activities of viral software;
Coes in the application of applications (most often, in such faults, the culprits are viruses or software solutions that produce an application emulation).

Cause 1: Installing a new program or equipment

If you installed a new software solutionThis can lead to the appearance of a blue death screen. The error could arise because of software update. Provided that you conducted similar actions, you need to return everything to your previous condition. To do this, you need to roll back the system by the time when the errors were not seen.

There will be launch of the Windows Recovery Process 7, after which your PC will restart and the malfunction must disappear.

Cause 2: Lack of free space

It is necessary to make sure that on the disk where are located windows files, there is a necessary free space. The blue screen of death and various major malfunctions occur if the disk space is overflowing. Clean the disk with system files.

Microsoft advises to leave free minimum 100 MB, but as practice shows, it is better to leave 15% of the system partition.

Cause 3: System Update

Try updating windows 7 to latest version Service Pak. Microsoft stably produces new patches and packages with updates for its product. Often, they contain fixes that help eliminate BSOD fault.

Cause 4: Drivers

Procedure to update your system drivers. The overwhelming majority of BSOD errors are associated with incorrectly installed drivers that cause a similar malfunction.

Cause 5: System Errors

Check the event log on the presence of warnings and faults that can be associated with the appearance of a blue screen.

Cause 6: BIOS

Incorrect BIOS settings may result in bsod error. After throwing these parameters, you can fix BSOD problem. How to do it, told in a separate material.

Reason 7: Hardware component

It is necessary to check for the correct connection of all internal cables, cards and other components of your PC. Elements that are poorly connected can cause the blue screen appearance.

Error codes

Consider the most common error codes and their interpretation. It can help troubleshoot.

Inaccessible Boot Device. – this code means that there is no access to the download section. The download disk has a defect, a controller malfunction, also incompatible system components can cause a problem;
KMODE EXCEPTION NOT HANDLED - The problem most likely arose due to problems with hardware components of PCs. Incorrectly installed drivers or physical equipment breakdown. It is necessary to conduct an alternate check of all components;
NTFS File System - The problem is caused by the failures of the system window files 7. Such a situation arises due to mechanical damage In the hard disk. Viruses recorded in the hard drive area causes this malfunction. Damaged logic structures system files Also are able to cause malfunction;
IRQL NOT LESS OR EQUAL - such code means that BSOD faults appeared due to errors in service data or drivers windows 7;
Page FAULT IN NONPAGED AREA - Parameters that are requested cannot be found in memory cells. Most often, the reason lies in the defects of RAM or incorrect operation of antivirus software;
Kernel Data Inpage Error - The system failed to read the data that were requested from the memory partition. The reasons here are: Failures in the Winchester sectors, problem points in the HDD controller, malfunction in the "RAM";
Kernel Stack Inpage Error - OS is not able to read data from the paging file to the hard drive. Causes of such a situation - damage in the HDD device or RAM memory;
UNEXPECTED KERNEL MODE TRAP - the problem is associated with the system core, it happens both software and hardware;
Status System Process Terminated - A logical fault that is directly related to drivers or with incorrectly working applications.

So, to recover the correct operation of Windows 7 and get rid of BSOD error, first of all, you need to roll back the system at the time of stable operation. If there is no such possibility, then you should install the latest updates for your system, check the installed drivers, test the health of the PC. Error troubleshooting is also present in the fault code. Taking advantage of the methods that are given above, you can get rid of the blue screen of death.