How to unlock iPhone 6 if you forgot id. Found an iPhone - how you can unlock and keep it

When do I need to unlock my iPhone? Despite the fact that most iPhone models have fingerprint scanners, many of them continue to use digital passwords out of habit. There are also owners of phone models 4 and 4s, in which the fingerprint scanner is not built in at all. Plus there is a likelihood of glitches in the scanner. That is why thousands of people are still faced with the problem of a forgotten password.

After the tenth try, your favorite iPhone is locked forever. The company is trying to protect phone owners from data hacking as much as possible, so it is quite difficult to recover the password, but there is such an opportunity. In this article, there are as many as seven ways to unlock your iPhone if you forgot your password.

How to unlock an iPhone via iCloud

This method only works if you have the "Find iPhone" function set up and activated. If you don't care wondering regarding how to recover a password on an iPhone, use any of the other five methods.

1. First of all, you need to follow the link https://www.icloud.com/#find from any device, no matter whether it is a smartphone or a computer.
2. If before that you did not enter the site and did not save your password, at this stage you need to enter the data from your Apple ID profile. If you forgot your password account, go to the last section of the article on how to reset your iPhone password for Apple ID.
3. At the top of the screen, you will see the All Devices list. Click on it and select the device you need, if there are several.

4. Click "Erase (device name)", this will erase all phone data along with its password.

5. The phone is now available to you. You can restore it from a backup iTunes copies or iCloud or re-configure as if it were just purchased.

Important! Even if the service is activated, but the Wi-Fi access is disabled on the phone, or mobile internet, you will not be able to use this method.

Without an internet connection, most of the ways to hack an iPhone password won't work.

How to Unlock iPhone Using Recovery Mode

This method will work even if you have never synced with iTunes or turned on the function to find iPhone. When you use it, both the device data and its password will be deleted.

Connect your iPhone via usb to any computer and open iTunes.
2. After that, you need to hold down two buttons simultaneously: "Sleep" and "Home". Keep them for a long time, even when the device starts to reboot. You need to wait for the recovery mode window. On iPhone 7 and 7s, hold down two buttons: Sleep and Volume Down. Hold them for the same length of time.

3. You will be prompted to restore or update your phone. Select recovery. The device can exit the recovery mode, if the process is delayed, then repeat all the steps again 3-4 times.

4. At the end of the recovery, the password will be reset.

How to Unlock iPhone with iTunes on Previous Sync

If the owner has forgotten the iPhone password, this is the recommended method. Foresight in recovery is essential and if you are fortunate enough to have backup data, no problems should arise.
This method requires a computer that was previously used for synchronization with the device.

Use a USB cable to connect your phone to your computer and wait for it to appear in the device list.
2. Open iTunes. If at this step the phone starts asking for a password again, try connecting it to another computer or use recovery mode. In the latter case, you will have to postpone the question of how to unlock your iPhone and recover the passcode first. Learn more about it in method 4. Do not forget to check if you have the latest version of the program, if you need to update the program here - http://www.apple.com/ru/itunes/.

3. Now you need to wait, some time iTunes will sync the data. This process can take several hours, but it's worth it if you need the data.

4. When iTunes indicates that syncing is complete, select "Restore iTunes Backup Data". Using backups is the easiest thing to do if you've forgotten your iPhone password.

5. The program will display a list of your devices (if there are several) and backups with their creation date and size. The date of creation and size determines how much of the information will remain on the iPhone, changes made since the last backup will also be reset. Therefore, choose the most recent backup.

If you are unlucky enough to have a pre-made backup of your phone or you don’t need the data, read on and choose another method.

How to Unlock iPhone by Resetting Bad Attempts Counter

If your gadget is blocked after the sixth attempt to enter the password, and you hope to remember the password, try resetting the counter of incorrect attempts.

Connect your phone to computer via USB cable and turn on iTunes. It is important that Wi-Fi or mobile Internet is turned on on the mobile.
2. Wait a little while the program "sees" the phone and select the "Devices" menu item. Then click "Synchronize with (your iPhone's name)".

3. Immediately after the start of synchronization, the counter will be reset to zero. You can keep trying to enter the correct password.

Remember that the counter cannot be reset by simply rebooting the device.

How to Unlock iPhone by Installing New Firmware

This method is reliable and works for the vast majority of users, but requires the selection and download of firmware, which weighs 1-2 Gigabytes.

Attention! Choose your source for downloading the firmware carefully. If there is a virus inside it, it can completely break your iPhone. You won't be able to find out how to unlock it. Do not ignore the warnings of the antivirus program and do not download files with the .exe extension

Use your computer to find and download the firmware for your iPhone models with the extension .IPSW. This extension is the same for all models. For example, almost all official firmwares can be found here.
2. Enter Explorer and move the firmware file to the folder at C: \ Documents and Settings \ the username you are using \ Application Data \ Apple Computer \ iTunes \ iPhone Software Updates.

3. Now connect your device to computer via USB cable and enter iTunes. Go to your phone section (if you have multiple devices). Each model will have a full technical name and you can easily find yours.

4. Press CTRL and "Restore iPhone". You will be able to select the firmware file that you downloaded. Click on it and click "Open".

5. Now it remains to wait. Eventually, the password will be reset along with your data.

How to unlock iPhone using a special program (only after jailbreak)

If your beloved phone has been jailbroken by you or the previous owner, all of the above methods will not work for you. They will lead you to install official firmware... You will have to download a separate program called Semi-Restore for this. It won't work if you don't have the OpenSSH file and Cydia store on your phone.

Attention! At the moment the program works only on 64-bit systems.

Download the program at https://semi-restore.com/ and install it on your computer.
2. Connect the device to your computer via a USB cable, after a while the program will recognize it.

Now the world is almost impossible to imagine without new technologies. Everything is striving for faster development and technologies are becoming more and more vulnerable. Now, almost everyone with a new phone, laptop or tablet prefers to protect their data with a well-designed password. This is especially often used by those who work with various bank transfers and personal data.

To protect their iPhone data, most users set passwords. But there are small gaps in memory, due to which it is not possible to unlock it. Also, the device can be blocked in other ways, for example, when the telephone was hacked. You will learn how to unlock a locked iPhone in certain situations in this article.

How to unlock an iPhone without a password?

If your iPhone is locked, then you don't have to worry too much, because there are proven ways to unlock it. The first step is to be able to connect to iTunes on a PC, laptop or netbook.

If the password was entered incorrectly a certain amount of times, as a result of which the iPhone was blocked, you can still sync with iTunes. Before changing the password for logging into the device, you need to connect your phone to USB using the standard cable supplied. It is imperative to synchronize all the information in order to be able to restore it.

Steps to restart your iPhone

The iPhone is locked, but you urgently need to use it? To do this, you can apply a special DFU mode. Restart your iPhone with the following steps:

Press the lock key and the "Home" button at the same time, hold them for a few seconds.
When the logo appears on the iPhone, you need to release the lock button, but at the same time hold the "Home" button.
Next, you should wait for the notification about syncing with iTunes.
When the phone is found by the computer, the recovery mode will be visible.
Now you need to confirm this procedure.

Now the iPhone is locked (if the password is lost) only for a while until the end of the synchronization process. The phone will return to DFU mode, but without a password.

The procedure for unlocking a locked iPhone without a security code is simple but time-consuming. Often times, owners disconnect the phone from their PC beforehand. It is undesirable to do this, since if you resume incorrectly, all information can be completely erased. In addition, in future use, system failures may occur during the operation of the iPhone.

If you are faced with this problem, then the above method will definitely help you, but remember that unlocking an iPhone without iTunes support is unrealistic.

Other ways to unlock

Many users say that in working capacity operating system iOS, there are spaces that allow you to bypass the security code by doing emergency call... But Apple closed this error, so trying to jailbreak the iPhone without security code will not work.

There is also another technique - when through iExplorer it is recommended to get rid of the file with iPhone password, but this option is unlikely to help achieve the goal.

Some iPhone owners, that it is possible to change the password on the iPhone through special program Find my iPhone. Unfortunately, this method is also invalid.

IPhone 5 S locked: what to do

How to unlock iPhone 5 S if it is locked? The device can be unlocked using a jailbreak. This method is very easy, you just need to download the SemiRestore program. The reset requires OpenSSH and can be obtained from various available sites. Next, you need to connect the iPhone 5 S, start the application and after the program is running, click on the SemiRestore button in the main application window.

How to unlock iPhone 5 if it is locked

This can be done using one more method. Locked iPhone 5S can be unlocked with iCloud service... To carry out the necessary actions, you need to make sure that the Internet is working on a PC. In addition, the Find my iPhone program should be running.

Go to the search program from iCloud.
Login to the site using ID and password.
Make sure that this service found an iPhone online (a green circle should be highlighted).
Click on the phone and press the "Erase" button.

This technique will delete all data from the iPhone, so it is advisable to save it in advance.

Fight against fraudsters

If the iPhone is blocked by scammers, what to do? First, you need to discuss how to prevent attackers from gaining access to your Apple ID, which is precisely what makes it possible to remotely lock your phone.

Don't use email addresses for Apple ID. These addresses are easily accessible to intruders.
Make your Apple ID password harder, less hackable. This method is recommended by Apple itself. Moreover, if the password turned out to be light, then the Apple ID, figuratively speaking, will “force” you to change the password to a more complex one, this will happen when you enter the Apple ID management web page.

Now let's move on to the main answer to the question. What to do if the message "iPhone lock" appears.

Make sure that the iPhone is really locked, and you can't unlock it yourself. To do this, you need to go under your data to the Find iPhone program on the official website icloud.com. If you manage to enter this program, then you immediately need to remove the lock and quickly change the password to the Apple ID.
Fraudsters often hack Apple ID very simply, that is, they know the password for the account in advance, but do not immediately change the password. Therefore, there is a great chance to solve this problem quickly and independently.
If the "bad people" are serious about this case and have changed the password to their new one, they may demand money from you to unlock it. Without any hesitation, you should contact Apple tech support... This service will help to solve this problem even without presenting documents that the iPhone is personal property.
There are all sorts of situations, and if, nevertheless, technical support did not help, then you will have to transfer money to scammers, because the phone can no longer be unlocked. Immediately after unlocking the gadget, you should change the password, create a new and very complex one.

You should not immediately panic and transfer a certain amount to the attackers, first you need to try all the solutions that were outlined above.

Unlocking iPhone 5 S with Forgotten Apple ID

People who forget their Apple ID or mailbox address are embarrassed and forced to prove that they own the iPhone. In this case, you need to perform some actions.

Before selling your phone, you should definitely disconnect the binding, as well as deactivate the Find an iPhone service.

Thanks to this, the future owner will be able to use all the functions without obstacles.

When buying an iPhone, you should always check this function, whether it is turned off or on.

To check, you need to enter the icloud.com website in the activationlock tab, you only need to fill in the IMEI of the device you are purchasing. This will help avoid problems with activating the iPhone if you lose contact with the previous user.

Unlocking iPhones is a difficult process that is not easy for everyone. Most important point during the unlocking process, a receipt is displayed confirming the purchase of the device.

Why do you need a lock

One of the circumstances is iPhone update to the 7th version of iOS, in which the "Find an iPhone" function was created, designed to reduce the number of thefts of iPhones. But along with the scammers, users who purchased the device from previous owners also suffered.

So, if the owner of the iPhone does not disconnect it from his personal account then the buyer has a great chance to purchase a locked phone. Now there are many specialists who offer services for unlocking iPhones, but, unfortunately, many of them turn out to be hackers.

Now you have some knowledge of what to do if your iPhone is locked. What to do - now you know!

Often, users of the famous Apple smartphone wonder how to unlock an iPhone.

The fact is that this device is blocked in the absence of movements (touching the screen) and user actions. And you can remove the lock using a key that is set by the user himself.

But if this very key is forgotten, then it is impossible to do it. And it turns out that such a good device will just lie there and do nothing.

There are several ways to help you resume full use IPhone 4, 5 or 6, that is, bypass the key.

1. Method number 1. iTunes

This is the easiest and most reliable way to solve the problem. On the Apple website, it is positioned as standard for the iPhone 4, 5 and 6. Therefore, it is worth resorting to it first.

Step by step it looks like this:

Download iTunes from Apple servers (here is the link) and install this program on your computer.
Take your iPhone and connect it to your computer with regular USB cable. Run the program. It should automatically detect the device connected to the computer.
Open the phone menu (the corresponding icon at the top left). In the menu on the left, open the "Overview" section and in the block with the name of the device version click the "Restore iPhone ..." button.

Rice. # 1. "Restore" button in the phone bar of iTunes

After that, the restoration of the iPhone to the state in which it was originally will begin.

At the same time, all data will remain in place, although, to be on the safe side, it can be copied through a computer to a PC or USB flash drive, and then transferred to an iPhone again. Together with all the settings, the password will also be reset, after which the device can be used again as before.

If for some reason it is not possible to complete the steps described above, do this:

In the same way, connect your iPhone to your computer and start iTunes.
Then perform the so-called forced start. We will not go into details and tell what it is, let's just say what is on different versions it starts as follows:

- iPhone 6s and below - press (and hold) the "Sleep" and "Home" buttons at the same time, hold them until such a picture appears, as shown in Figure 2;

- iPhone 7 and 7 Plus - Pressing (and holding) the Sleep and Volume Down buttons at the same time, hold them until you see a picture as shown in Figure 2.

Rice. No. 2. Recovery mode screen

A message will appear on the computer stating that something is wrong with the connected device and it is better to restore it (in short). Actually, this is what we need. Click on the "Restore" button.

Rice. No. 3. Reporting problems with your smartphone

After that, the recovery process will begin - exactly the same as during normal use of iTunes. It usually takes no more than 15 minutes.

Attention! The process may fail and you will have to do it all over again. This happens and you need to be prepared for this.

There is, by the way, a more aggressive way, which implies guaranteed erasure of all information. It also uses iTunes. But in most cases, standard recovery works as well.

If this is not the case, it is better to use method number 2 from our list.

2. Method number 2. iCloud

In this case, we will do without iTunes.

If someone has forgotten the password for an iPhone 6, 5 or 4, you can use Apple's cloud service to reset the password and, again, all factory settings.

Important! To use iCloud to reset your password, your iPhone must be connected to the Internet. If this is not the case, you will not be able to use the cloud.

But if he is nevertheless connected to the network (perhaps the user forgot to turn off the Internet and did the right thing), do this:

Log in from a computer or other device to the phone / tablet / computer search service from Apple (here is the link). Log in there. In this case, use the same username and password that are used on the locked iPhone. That is, use the same Apple ID.
Click on the "Devices" button and find your iPhone in the list. Make sure there is a green circle next to it - this means that this device available. If this is not the case, you will not be able to use iCloud.

Rice. No. 4. List of available devices of the Apple Apparatus Finder Service

A new panel with information about the selected device and three buttons will appear on the right. Among them is the "Erase iPhone" button. This is the same restoration that we used at Aycloud. But it is better, again, to dump all files to a computer or USB flash drive.

Rice. No. 5. Functions of the selected device on the Apple device search service

Then you will need to enter the password again.

As you can see, in this case, you can do without a computer. You just need to know the username and password from Apple ID, which is used on the locked iPhone.

3. Method number 3. SemiRestore

The above two methods will not work if you are using unofficial firmware. And in general, they do not always work, so it would be nice to have one more "ace up your sleeve". This is the SemiRestore program.

To use this program, do the following:

Download SemiRestore (here is the link) and install it on your computer.
Connect your iPhone to your computer using the same USB cable.
Start SemiRestore and wait while the connected device is detected in the window of this program.
When this happens, click on the only button in the middle of the open window - "SemiRestore". Actually, it also implies the beginning of recovery.
Wait for the cleaning process to finish. You can watch it in the program window.

Rice. No. 6. SemiRestore window and the process of restoring a connected iPhone

At the same time, a variety of processes will take place on the iPhone. It will turn off, and then turn on again. You should not be afraid of this - everything is fine. Just wait for it to be over.

On some models, in particular 4, everything is even easier - there it is enough to perform a reboot or a few simple manipulations. More on this in the video below.

The more numbers and letters in the access password, the more likely your device will not be jailbroken. But, this situation has the opposite result, this defense may one day work purely against you. Imagine that you have forgotten your password and cannot remember it in any way, it just flew out of your head, and thus gave you a "Merry Life". The only way out is to unlock the device, and today we will figure out how to do it.

Unlocking the device via iTunes program

You can unlock your phone through the program in two ways: by saving the data, and by refusing to save. Saving data only works if the device was connected to the computer and there were no problems. If your device is frozen when connected, then you will not be able to get the data out of it.

To complete the unlocking process, with the data saved, you need to open the iTunes program, and go to the section with the name "Devices". There you need to select our device, and go to the top menu to the "Browse" item. We immediately find the "Version" menu, and there we click on the button labeled "Restore". After that, the password will be reset and all your data will remain intact.

You can, just in case, make a backup copy of all data, and this copy will be on your personal computer.

Recovering our device without saving data.

If using the first method did not work, due to the fact that a system error popped up, you need to go to the second option, which may turn out to be more effective. The procedure is as follows:

Downloading the latest version of the software from the official site.
- Transferring the device to DFU mode. In order to perform this action, you first need to connect USB device cable to personal computer, then simultaneously press two buttons - Power, Home. After ten seconds have passed, you need to release the Power button, and continue to hold the second button. It takes five seconds for the apple icon to appear on the screen. Now in the program, click on "Restore", and wait for the necessary firmware to be downloaded to the device for recovery.

After this action, the password will be successfully destroyed, and you will be able to log into your device without much difficulty.

The second effective method is to unlock the device using the ICLOUD service.

This method is not universal, because it destroys all data on the device, it will be possible to restore them, provided that you created a backup copy.

To use this method to unlock your device, you must first download software such as Find iPhone. In addition, in order to unblock your smartphone, you will need an Internet connection, within your means Wi-Fi networks or mobile data.

Recovery order:
- We are convinced of the availability of Internet access.
- We go to the Find iPhone program from any device connected to the same network.

In the section all devices, we find the phone, access to which has been blocked, open the options menu of this phone and select the "Erase all data on iPhone" item.
- A confirmation window opens, in which you will again need to click on the "Erase data" button.

The last point is to enter your Apple ID password and click on the "Finish" button.

After that, you will notice that the factory reset has started, you do not need to do anything until the download bar reaches the final, and you will not see that the Apple logo popped up on the screen.

Unlocking the device after performing the "JaIlBreak" operation.

There are people who hacked their phone, and they do not want to use the first two methods, because after restoring the phone, it will go into the factory settings mode, which means that their hacking will not be visible, everything will need to be done in a new way. For this reason, a third method has been released and is optimal for everyone. The bottom line is to take advantage of free program, which has the name - SemiRestore. For this program to work, an important component must be installed on your device, its name is "OpenSSH", you will have to download this component in the application store - Cydia.

SemiRestore software must be installed on a person's computer, it removes all settings without removing JailBreak on the device. Unlocking the utility using this method takes place in several stages:

Downloading from the official site of the utility.
- Connecting the device to a computer using a cable.
- Launching the downloaded utility, and recognizing your device.
- After the recognition process, you must select the button responsible for the process of clearing all data on the device.

During this process, your device may undergo multiple reboots. You should not worry, this is a normal phenomenon, when the process comes to its end, then on its screen you will be able to notice the desktop that has the initial settings. But, no need to worry, because the store Cydia apps has not gone anywhere. After launching it, and finding that it works in normal mode, it will be possible to conclude that the jailbreak has not disappeared, and it can be used, as it was before the moment of unlocking. Now you can re-put a new password on the device, and if it is possible to set a backup copy of the data you need.

Now, every person who has read this instruction from the beginning to its logical conclusion, perfectly understands how he can restore an iPhone. There is no need to think that it is difficult to perform these actions, and there are many pitfalls in the process, in fact, there is nothing difficult, you can easily do all the manipulations yourself without resorting to the help of specialists. It is recommended, before starting each action, to do backup data, this will help in case of something, restore the iPhone to its original form. After all, you never know what can happen due to doing some actions.

If the user has forgotten the four-digit password on the iPhone 4S or 5S, it can only be unlocked by flashing it by connecting to a computer with installed iTunes app... This is the only way out, in which, in addition, all personal files on the phone are lost. And if there are no credentials in the Apple ID, then the "Find iPhone" option must be disabled for a successful reset, since it will be impossible to activate a phone with iOS 7 without entering this information.

Reflashing iPhone to reset password

Once again, we note that only a flashing is the only way reset iPhone 5S if its owner has forgotten the password. We will describe how to reset the code from the lock screen using a flashing.

Preparatory stage:

Run on iTunes computer, in the help menu, check for updates to your media player. For work, you will definitely need the most fresh version applications.
Connect the original Apple USB cable to your computer.
Click on the phone icon in the application, going to the iPhone menu. A window will open, with which you will directly work.

If an inexperienced user has forgotten the password, then the easiest option for him to unlock the phone is to click on the "Restore" button. The program will independently download the latest firmware for your gadget from Apple servers and reinstall iOS on the device. Then, using the same application on your computer, you can restore personal data from previously saved backup copies.

However, this simple method has a number of disadvantages:

the last iOS version has a size of about 1.5 GB, which makes the download and reinstallation process quite lengthy;
for any failure in your home internet or short-term lack of access to the Apple server, the process will have to start over;
recovery when using a Windows computer is usually accompanied by the appearance of errors, leading to the inability to reinstall iOS in normal mode.

With Mac OS, the situation is somewhat different - problems when choosing this option to unlock the password, if they arise, are extremely rare. Therefore, the above method is more suitable for owners of Apple computers.

True, here it should also be borne in mind that iTunes automatically downloads latest version firmware, which may differ from yours. This can be an important argument for the owners of the so-called. "Jailbroken" devices that can work with only one firmware version.

Installing our own firmware

There is a way to significantly reduce the likelihood of failures during work. To do this, you just need to download the firmware suitable for your phone in advance and then use it during reinstallation. Your actions will change slightly:

Then everything will happen automatically. The device can be unlocked when it goes into Recovery Mode, flashes and reboots. All that remains is to select the language, region, connect to iTunes and select the "Like new" phone setting.

Resetting the password in DFU mode

The described method does not always make it possible to avoid device errors by resetting the password. The most reliable way to unlock iOS is achieved by forcing the device into DFU mode, which is significantly different from the previously used Recovery.

The latter acts, in other words, like a "rollback" the existing system to the original state with the restoration of the factory settings and parameters. DFU, on the other hand, is a bootloader mode in which the device's memory is formatted, system components are reinstalled, and iOS is completely re-installed.

Password reset by flashing in DFU mode

If the user forgot to make a backup of their personal data, they will be lost, since in order to unlock the device in DFU mode, iOS needs to be completely reinstalled. The sequence is as follows:

Turn off the iPhone, connect it to a PC with fresh iTunes installed using an Apple USB cable and enter the device into DFU mode. This is done like this:

○ hold down and hold the power key of the gadget for 3 seconds;

○ press and hold the Home button for 10 seconds without releasing the power key;

○ release the last one after this period of time, and hold “Home” until the gadget enters DFU mode.

In iTunes, select your device and click "Restore" while holding down Shift (for a Windows PC).

You may not be able to activate DFU mode the first time, especially if you have not had such experience before. There is nothing terrible in this, you just need to understand how to recognize that the device is in DFU, and not in Recovery Mode.

The latter is very easy to distinguish when a characteristic image of a media player icon and a USB cable appears on the screen of the device. When the device is entered into DFU mode, on the contrary, the display will be completely black (or in some cases white), will not respond to a single button press. However, iTunes will be able to detect it, and in the corresponding window it will be written that the device is in Recovery mode... Do not pay attention to this - proceed according to the already described template.

How to recover Apple ID account data

Unlocking the phone is not so difficult as long as the user has not forgotten the Apple ID password. However, if you forget this data too, recovering your device can be difficult.

Moreover, if the Find My Phone feature is enabled on iPhone 5S with iOS 7, the device is automatically linked to the account. Apple records ID, so even after flashing using DFU, the gadget cannot be unlocked without logging into your account.

Successful methods of hacking the firmware are not yet known, therefore, to restore the account, you will have to act exclusively in official ways. There are not so many of them:

Go to the page https://iforgot.apple.com and enter the one specified during registration mailbox which is your Apple ID, click the Continue button.
If you choose to confirm using E-mail, a message will be sent to the mailbox associated with the Apple ID containing a link allowing you to change your password.
If access to e-mail you do not have, try to answer the security questions specified during registration.

If none of the methods worked, you will have to contact support and resolve the issue with access to your account personally.

Complain about content

send