How to independently change the IOS version and reflash iPad. You wonder how to flash the iPhone yourself - at home? Consider the main options
In the update process operating system IOS devices store all user data: photo, applications, contacts and so on. When restoring the device, the device is reset to the factory settings with an increase in the software version to be reset, with the process all data on the device will be deleted, that is, you will receive a "clean system". The flashing is performed in the case of: frequent software failures, installation of new software additional optionsWhen changing the user device.
Download on the Internet and install on your computer last version iTunes and appropriate iOS version For your device. Connect the iOS device to the computer using a USB cable in normal operating mode, run iTunes. The program will determine the model of your iPhone and will give a notification with the offer to update and install new firmware. Select the model of your device in the iTunes menu. Press and hold the "SHIFT" key on the keyboard left-click on the Restore button in the program window. If the computer is connected to the Internet, then download the new firmware version and its installation will start automatically. iTunes will pre-save the user on the computer. Agree to the update - and the process of flashing will begin.
Never perform recovery or update official version IOS firmware on a lociated (tied by the SIM card to a specific operator) iPhone. This will lead to a flashing and built-in modem of the device, and subsequently it cannot be "unlocked" by the program method. You can not use the update and on the iPhone with the jailbreak (modification of the iPhone firmware, which is not approved by Apple to put on the application application not from App Store.). IPhone with jailbreak must be restored through Dfu Mode.
Apple smartphones and tablets are famous for its coherent work. software and hardware. Due to this, the uninterrupted functioning of devices is achieved, and all the emerging problems with the firmware American corporation eliminates as soon as possible by updates. At the same time, the user may need to reflash iPhone or iPad. You can do it yourself, without the involvement of the service center specialists.
Under the concept of flashing the device means its recovery. This process It is not necessary to be confused with the update, since it has one cardinal difference: performing recovery, all data from iPhone or iPad is finally erased. After flashing the device returns to the factory settings, and it will be possible to restore the data only if there is a backup.
Why do you need to reflash iPhone or iPad
Nothing is insured from software failures, and Apple devices including. Despite the fact that one corporation is responsible for the development of "iron" and the firmware, and problems may arise with the work of the iPhone or iPad. Software failure It can lead to the failure of the IOS-device, and it will be possible to return it to a working state only by flashing.
Also recovery may be necessary if the user has forgotten the iPhone or iPad unlock code. Resetting the device before source state, the password will be removed from it.
Another reason for flashing the iPhone can play the scheduled for sale of the device. In order for the buyer to receive a smartphone new on factory settings and without the data of the former owner, it is possible to restore it.
Important rules for restoring Apple devices
Process recovery iPhone. And iPad can only be performed using a computer using the iTunes program.
Apple company Does not allow IOS to be installed on the device other than installed. This rule has an exception that received the name "Temporary Window" among users. Under this concept, the term is determined in two weeks (in some situations it changes) After updating the firmware, during which the user can "roll back" the IOS version to the previous one.
Important: This rule Does not apply to beta firmware iOS. If installed test option Software, at any time the owner of the device has the right through iTunes to restore it to the last official version of the firmware.
Preparing for flashing iPhone
Before proceeding directly to the process restore process, you need to download the correct version Firmware for its subsequent installation. IOS software extends to format.IPSW. Depending on the smartphone or tablet model, it differs, and from the Internet it is necessary to load the firmware for specific deviceSo that the installation has passed smoothly.
To determine which version of the firmware is necessary for the iPhone or iPad, you will need to look at the rear cover of the device. There is always an indication on it. specific modelFor example, Model A1332.
Please note: Each device from Apple (iPhone 5, 6, 6S and others) is performed in several variations, that is, they differ in models. It is important to select the firmware for a specific model, as they differ quite significantly from each other, primarily supported by networks.
Also before flashing the iPhone or iPad, you must disable on the device. If this option is not disabled, the system will not allow you to restore the smartphone or tablet.
Installing the firmware on Apple devices is made only with the iTunes program. It can be downloaded from the official website of the American Corporation.
Important: Before installing the firmware on the iPhone or iPad, update version of iTunes. Prior to relevant so that fails occur in the recovery process.
How to reflash iPhone or iPad
Apple has provided two recovery modes of their devices - standard and using dFU modes. The second option is useful if the first does not work or errors occur when restoring the smartphone / tablet through it.
Refracting iPhone or iPad in normal mode
Recovering device through normal mode Performs as follows:
After that, the process of restoring the device will begin, which will be performed in fully automatic mode.
In this article we will tell you how to update iOS on the iPhone or iPad to the latest version. To access the set of new features completely free.
We also explain how to launch the latest version on your device. And you will learn about the potential problems with which you may encounter after updating on iOS 11 and whether to leave your iPhone or iPad updated overnight.
IOS update is a fairly simple process, but there are several actions that we recommend to do before you begin to update - this will minimize the risks of data loss or collision with any other problems after the update. However, if you do not wait to touch the new iOS 11, you can follow our instructions below.
Note: Perhaps your friend saw an update before you, and therefore you do not see it.
How to prepare iPhone or iPad to update iOS?
As you learned from the instructions above, update the iOS is simple enough, but before you do this, we recommend implementing special training that will protect your iPhone or iPad from potential threats.
1) Make data backup
Use iTunes or ICLoid and make your data backup with iPhone, iPad or iPod Touch.. Never skip this step as your carelessness can lead to an irreversible data loss, if something goes wrong during the update. If you find that your photos or messages are disappeared after the update, you can simply restore them from your backup of your data.
How to make iOS backup with ICLOUD?
Step 1. Open the Settings application and click on your name to access settings icloud. (Users of older versions iPhone Have the ability to go to ICloud directly through the "Settings").
Step 2. Now click on "icloud" and then on "iCloud backup".
Step 3. Click on "Make backup Data "and wait for the end of the process.
How to make iOS backup with iTunes?
Step 1. Connect the iPhone or iPad to the PC when uSB help cable.
Step 2. Start iTunes and select the connected iOS devices by pressing their logos in the upper left corner of the iTunes screen.
Step 3. On the "Overview" screen, select Create a copy now. (Make sure that the encrypted backup function is enabled in order to save your passwords.)
Note: Bacup includes purchased music, TV programs, applications, books, photos, video, device settings, but does not contain any data from your PC. In order to reinstall this data, you need to re-synchronize with iTunes.
2) Make a copy of the old version of iOS
Before you know how to update the iOS you need to take care of copies of the old version. As a rule, this is a rather reasonable idea, because you can change your opinion and decide to return to old version iOS, and it will be much easier if you make it a copy. There is a chance that Apple will stop maintaining old IOS versions and then the refund will be impossible.
If you have a copy on the disk, you will find it on the next way: library / iTunes and then select the "Software Updates" folder for your device.
Your Mac could delete this file, however, in this case you can start the browser and find old versions of firmware on the Internet. You will see a huge number of sites offering the links you need. Make sure you choose the desired for your device.
3) Free enough space on your device
If you have little free memory on the device, perhaps you will not work update as it requires a large amount free space. We recommend removing what you do not need. This item for those who are updated directly on the device.
4) Connect the iPhone or iPad to the power source
Make sure your device is connected to the power source. The disadvantage of the battery may be the reason for stopping the update.
5) Make sure your device is connected to WiFi network
If your device is not connected to WiFi, it will have to download via 3G or 4G network. It can eat your monthly traffic.
How to update iOS directly on the iPhone or iPad?
You can update by directly through your iOS deviceThis is called a wireless update mechanism. It is carried out using the "Settings" application. If you wish, you can update through iTunes using PC. You can use any of the presented ways, but the most simple is the wireless update through the "Settings" as it does not require using MAC. or PC.
Step 1. Go to "Settings"\u003e Basic\u003e Update.
Step 2. Check the smartphone for updates.
Step 3. IOS will familiarize you with the details of the new update, including the amount of free memory required to install a new OS (maybe you have to make a place before starting the process).
Step 4. Click "Download" - Perhaps your device already downloaded iOS 11 automatically.
Step 5. Your smartphone downloads update in background mode. Once the download will be completed, you will receive a notification that contains information about the available update on your device.
Step 6. Click "Details" - To do this, go to "Settings"\u003e "Basic"\u003e "Update software".
Step 7. Click "Set". Now the iPhone or iPad will start installing the iOS update. It may take time depending on the power of your device and the stability of the Internet connection.
Step 8. If necessary, you can postpone the installation for later. Notification will remain in the "Settings" until you complete the update.
As soon as you finish the installation, the update on iOS 11 will be completed. Now you can learn about the features of the new OS or immediately begin the development of the updated smartphone.
How to update iOS on iPhone or iPad directly? (Video)
In the video, they will show how to update the iOS on the iPhone or iPad, through the device itself.
"," Type ":" Inline "," Skip_Delay ":" 8 "," Time ":" 0.5 "), (" Source ":" "," Type ":" Inline "," Skip_Delay ":" 8 " , "Time": "0.99")] "\u003e
How to update the iPhone by Wi-Fi?
"," Type ":" Inline "," Skip_Delay ":" 8 "," Time ":" 0.5 "), (" Source ":" "," Type ":" Inline "," Skip_Delay ":" 8 " , "Time": "0.99")] "\u003e
3 ways to update on new iOS.
"," Type ":" Inline "," Skip_Delay ":" 8 "," Time ":" 0.5 "), (" Source ":" "," Type ":" Inline "," Skip_Delay ":" 8 " , "Time": "0.99")] "\u003e
How to update iOS on old iPhone?
How to update iOS on iPhone or iPad via iTunes, using a computer.
If you do not have enough space on the device or update via "Settings" for some reason does not work, you can use the update via iTunes.
Step 1. Connect the iPhone to Mac or computer.
Step 2. Turn on your PC and run iTunes.
Step 3. Most likely you will see a message "New version of software for iPhone already Available (11.0) for "Your Phone Name" iPhone. Do you want to download and install an update on the iPhone now? "
Step 4. Before pressing Yes, check whether your backup is relevant on iCloud. If data backup has been made significantly backwards and already outdated, we recommend that you make a new backup before upgrading. It will take you a few minutes.
Step 5. Click "Update" and wait until Mac connects to the iOS update server.
Step 6. Agree to the Terms of Use of the New OS.
Step 7. When you ask you a password on the iPhone or iPad, your fingerprint can be enough.
Step 8. After completing the update on Mac, firmware update on the iPhone will begin.
Step 9. Your iPhone will be rebooted and you can make starting settings for a new OS.
You can follow the entire process in the video at the bottom of this article. It may take some time, depending on whether you are updated at the same time. Like everyone else in the world, but in less good circumstances it takes only about 40 minutes from the beginning to the end.
When iPhone or iPad will finish installing iOS 11, you will be offered several simple settings. After completing them, you will move to the home screen and you will enjoy the newest OS!
How to update iOS on iPhone or iPad via iTunes? (Video)
In the video, you will show how to update iOS on the iPhone or iPad, via the computer (Mac) or any other PC using the iTunes application.
"," Type ":" Inline "," Skip_Delay ":" 8 "," Time ":" 0.5 "), (" Source ":" "," Type ":" Inline "," Skip_Delay ":" 8 " , "Time": "0.99")] "\u003e
Install a new iOS via iTunes
"," Type ":" Inline "," Skip_Delay ":" 8 "," Time ":" 0.5 "), (" Source ":" "," Type ":" Inline "," Skip_Delay ":" 8 " , "Time": "0.99")] "\u003e
Firmware of any iPhone through iTunes
Why do you need to make a clean iOS installation on the iPhone or iPad?
What is the advantage of a clean installation over recovery when upgrading to a new phone or tablet?
On old devices, clean installation can help the device work faster and smoothly. Even on my iPhone 6s Plus everything was much better when I performed clean installation. When performing a clean installation, you can follow two methods.
If you go to new iPhone Or iPad, you do not need a clean installation to speed up the work - only hardware updates will do it. But if you are still interested in performing a clean installation, read on and you will learn how to update iOS.
How to perform a clean iOS setting on the iPhone or iPad?
The method includes deleting phone data and recovery to the latest IOS version. Once you do it, you can configure the phone as a new iPhone or restore from the backup. If you really want to start from scratch, you will have to manually download all your applications and set up again. The reason why it does not make that you lose all your old messages and data.
How to update iOS? The first thing you need to do is open iTunes on your PC or Mac. You can not perform a clean installation with an iPhone or iPad directly. From the device itself, you can also update only to the latest IOS version.
First you need to download the firmware file compatible with your device, and save it to your desktop. Loading will take some time, as the IOS firmware file weighs a couple of gigabytes. It is best to brew coffee at this moment while downloading is running.
Download iOS 11.1 IPSW File
You can download the firmware file 11.0.1 for your device by reference below.
How to upload and install clean iOS on iPhone or iPad?
Step 1. Assuming that you have iTunes, and the IOS 11 firmware file is downloaded, connect the iPhone, iPad or iPod touch to a computer or Mac using the Lightning cable.
Step 2. After opening iTunes, click on the phone or tablet icon, which is displayed at the top.
On this screen you will receive basic information about your phone, such as a model, serial number, phone number, etc. D. On the right you will see current version iOS.
Step 3. Now you have to see the button with the inscription " Restore iPhone" Click on it by holding the left key Option or the left key SHIFT (Mac) and select the iOS 11 IPSW firmware file.
Step 4. After selecting the iTunes firmware file will remove it, restore your device and confirm the update at the end.
When everything is ready, you will boot directly into the IOS 11 greeting screen. From now on, you can customize your device as you like. Either recover backupwhich you created or stay in the fresh system if you want.
That's all. This method is a clean installation, because you clean the phone and install a new version of iOS 11. Even if you restore the backup after new InstallationYour phone will continue to work better than if you just updated iOS 11 to the device. If you have any questions or any problems arise, do not hesitate to leave comments!
How to update beta version iOS to final?
If you installed iOS 11 before the official output and became a beta tester, then we have good news for you. You do not need to do anything special for the transition to the final version of the OS. Both IOS versions have the same serial number - 15A372.
However, in order to receive new updates, you need to remove Apple's profile configuration from your device.
How to update iOS from beta version with iPhone or iPad directly?
If you are ready to update iOS on the iPhone or iPad, you do not even need to connect to a computer.
Step 1. Open the "Settings" on the iPhone or iPad.
Step 2. Click "Basic".
Step 3. Click "Profiles".
Step 4. Click "Beta IOS Update Profile".
Step 5. Click "Delete Profile".
Step 6. Enter your password if required and click "Delete" to confirm.
Step 7. Turn off your iPhone or iPad, holding the power button and selecting "Disable power" in the slider opened.
Step 8. Restart your iPhone by holding the on button until Apple logo appears.
How to update iOS from beta version via iTunes on a computer?
If you are more convenient to update the OS on your iPhone or iPad via iTunes on Mac or PC, it is still feasible, but a little more difficult than directly from the device.
Step 1. Turn off your iPhone or iPad, holding the power button and using the power off slider.
Step 2. Connect the iPhone or iPad to your PC.
Step 3. Press and hold the "Sleep / Wake" button (side button and the volume slider down on the iPhone 7 and above). Do not release the buttons after the Apple logo appears, continue to hold them before logging into the recovery mode.
Step 4. After the window appears, click "Update", on your PC.
Step 5. Click on the "Update" on the PC again for downloading and installing the final IOS Versa.
Step 6. Click "Accept" for consent with the Terms of Use of the New OS.
Then your iPhone or iPad will download and install the final version of iOS.
Ready, you updated to a new iOS, now?
Now that you have updated, you can see some of the best new features in iOS 11 available on the iPhone and iPad. Some of the changes in the operating system are quite thin, so it is useful to note some of the best. But, as always, it is worth examining the software on your own and feel what's new.
Enjoy iOS 11! We will continue to publish many tips and interesting chips, so continue to follow the updates in order to stay up to date. If you have any questions about the update, do not hesitate to share them in the comments to the article. If you have not been able to update, we recommend reading the article:
Apple smartphones are practically the standard of stability and reliability of hardware and software components among all released gadgets in the world. At the same time, during the operation of even such devices such as iPhone, various unforeseen failures may occur, which can only be eliminated by the complete reinstalling of the device's operating system. The material below examines the firmware methods of one of the most popular Apple devices - iPhone 5S.
High security requirements for Apple to manufactured devices do not allow to apply for iPhone 5S firmware a large number of Methods and tools. In fact, the following instructions are a description of the fairly simple official ways to install iOS in the EPL devices. At the same time, flashing the apparatus under consideration by one of the following methods very often helps to eliminate all problems with it without a hike in service center.
All manipulations on the instructions from this article are carried out by the user for their own fear and risk! For obtaining the necessary results, the Administration of Responsibility is not responsible, as for damage to the device as a result of incorrect actions!
Before switching directly to reinstalling iOS on the iPhone 5S, it is important to conduct a certain preparation. If the following preparatory operations are performed carefully, the gadget firmware does not take much time and will pass without any problems.
iTunes.
Almost all manipulations with apple devices, iPhone 5S and its firmware here is no exception, are carried out using a multifunctional tool for interfacing manufacturer's devices from a PC and control of the functions of the latter.
This program is written quite a lot of material, including on our website. To get complete information about the facilities, you can contact the program dedicated to the program. In any case, before proceeding to the manipulation of reinstalling software on the smartphone, read:
As for the iPhone 5S firmware, you need to use the latest version of iTunes. Install the application by downloading the installer from the Apple official website or update the version of the already installed tool.
Backup copy
In the case of application for the iPhone 5S firmware of one of the methods described below, it should be understood that the data stored in the memory of the smartphone will be destroyed. To restore user information, you will need a backup. If your smartphone has been configured to synchronize with ICloud and iTunes, and / or a local backup of the device system on a PC disk was created, the restoration of all important is carried out very simply.
In the event that there are no backups, it follows before switching to reinstall iOS, back up, using the following instructions:
IOS update
In a situation where the purpose of flashing iPhone 5S is only updating the version of the operating system, and the smartphone itself is generally working normally, the use of cardinal methods for installing system software may not be required. Simple iOS update very often allows you to eliminate many problems that are concerned about Apple-device.
We try to improve the system version, performing steps one of the instructions set out in the material:
In addition to enhancing the version of the OS, often improve operation iphone 5S allows an update installed applications, Including those that work incorrectly.
Before switching to the installation of firmware in iPhone 5S, you must obtain a package containing components for installation. Firmware for installation in iPhone 5S - these are files * .IPSW. It should be borne in mind that only the latest version of the system released for use as a device operating system will be installed. The exceptions are the versions of the firmware preceding the newest, but they will be able to install them only within a few weeks after the official release of the latter. You can get the desired package in two ways.
Firmware process
By training and uploading the package with the firmware desired to install, you can move to direct manipulations with the device's memory. There are only two iPhone 5S firmware methods available to the usual user. Both assume use iTunes as a tool for installing OS and recovery.
Method 1: Recovery Mode
In the event that the iPhone 5S has lost its performance, that is, it does not start, it is restarted, in general, does not function properly and cannot be updated via OTA, an emergency recovery mode is applied to flashing. RecoveryMode..
- Fully turn off the iPhone.
- Run iTunes.
- Click and hold on the iPhone 5S in the button off "HOME", We connect the cable to the smartphone, previously connected to the USB port of the computer. We observe the following on the machine screen:
- We wait for the moment when iTunes will define the device. Here are two options:
- Press key SHIFT On the keyboard and click on the button "Restore iPhone ...".
- A conductor window opens in which you want to specify the path to the firmware. Note File * .IPSW., Press the button "Open".
- A request will be received about the readiness of the user to the beginning of the firmware procedure. In the query window click "Restore".
- The further process of the iPhone 5S firmware is made of iTunes in automatic mode. The user remains only to monitor the notifications of the processes and the indicator of the procedure.
- After the firmware is completed, turn off the smartphone from the PC. Long pressing a key "Turning on" Fully turn off the device's nutrition. Then we start the iPhone with a short press of the same button.
- Opporting iPhone 5S is completed. We carry out the initial setting, restore the data and use the device.
Method 2: DFU MODE
If the iPhone 5S firmware for any reason is impracticable in RecoveryMode, the most cardinal mode of iPhone memory is applied - Device Firmware Update Mode (DFU). Unlike RecoveryMode, in DFFA mode, reinstalling the iOS is really completely. The process is carried out bypassing system software already present in the device.
The process of installing an OS device in DFumode includes the steps presented:
- Recording of the bootloader, and then it is launched;
- Setting a set of additional components;
- Memory recycling;
- Overwriting system sections.
The method is used to restore iPhone 5S, which have lost their performance as a result of serious software failures and, if you want to overwrite the memory of the device completely. Moreover, this method Allows you to return to official firmware After Jeilbreak operation.
Thus, the firmware of one of the most popular and common Apple smartphones is carried out. As you can see, even in critical situations, the proper level of performance of the iPhone 5S is completely simple.
The iPhones are now very reliable smartphones, as Apple makes a big focus on their quality, but it's still a technique and like any technique whether it is a computer, or a TV touch it tend to break. All these problems with the smartphone put you before choosing, attribute your smartphone to the service center, where you can contemplate a round sum or try to fix it yourself. This instruction is general and suitable for all iPhone models.
Let's deal with what the iPhone firmware is needed:
- In the case of software failure.
- If you need to establish the current version of the OS.
- In the case when you forgot your password (not to be confused with the activation lock of the APLLE ID).
- To create a clean system after changing the Device owner.
In this case, you can make very simple actions in order to restore your device to a working state, for this you do not need a programmer's knowledge is very simple. One of the simple ways to restore the iPhone is to reflash it, for this we will need a computer and iTunes. By the way, the same actions are made in the service center.
Before starting the process, do not forget to make Backup (backup) Your data music, photos, contacts and other important informationBecause after the iPhone firmware all the information will be completely removed.
Preparation in the firmware iPhone
Download the desired version Firmware with extension .IPSW.. For each models iPhone. Different versions.
You can see the version of your iPhone very easily, in the firmware files (4S, 5S, 6S, 7, etc.), you usually indicate a set of letters and numbers that can be seen on the back cover of iPhone, for example: Model A1332.There is a small problem of choosing the firmware, and it consists in what exists GSM. and CDMA models that work in different networks cellular communication. Therefore, you need to choose a suitable model. Firmware for GSM. Not installed on CDMA.
After you have identified your model Download yourself on a PC firmware that is suitable for your gadget, here's the site where you can -
Important!!! Apple does not allow to reduce the version of the OS, however, there is a temporary interval window a few weeks after the exit official update iOS during which users will be available previous version OS. 
Also an important feature is the ability to return to the last official version of iOS with a beta version installed on the device. 
To begin with, you will need to go to the settings and disable the function Find iPhone Without this, you will not be able to flash your device, as iTunes will give an error. Download the latest version on the official website.
Firmware iPhone in action
There are two ways to flash an iPhone, through Recovery Mode. and Dfu Mode.. RCOVERY MODE, This is an emergency recovery mode. Designed to recover after the smartphone stopped working as usual.
DFumode. - carries out actions by way of OS iPhone and makes the firmware directly through Firmware.. Also this method is recommended to owners who Jailbreak.IPhone Firmware via RecoveryMode
Turn off the phone and wait for the screen and holding the button Home Connect it to the PC. The computer recognizes the smartphone in recovery mode.
We run iTunes and wait when the program determines the iPhone you can get out such a window, click OK. 
If iTunes does not react to press the smartphone icon in program iTunes. And looking for item Restore iPhone Click on it holding the Shift key (for Windows OS) for Mac while holding Alt. Also in this menu there is such a function as an iPhone update:
File Manager appears before you, looking for our firmware and click Open. Next, iTunes will do everything yourself, waiting for the end of the download. After the download is completed, disconnect an iPhone from a PC and long press the button Power Turn off your smartphone. Then quickly press the button Power Turn on iPhone. That's all the iPhone is ready to use.
IPhone firmware via DFU Mode
We connect the smartphone to the PC and turn it off, then clinging the power and home buttons hold 15 seconds. Let's release the button Power Continuing to hold HOME. until iTunes identifies the device in mode DFu..- Choose your device in iTunes.
- In the control menu, we find the restore iPhone
- Click on this item while holding down the SHIFT key (for Windows) or Alt for Mac
- In the window that opens, select the file with the firmware open it.
- We are waiting for the completion of the firmware process.
- Turn on the device and usefully use.
This method is suitable for those who have Jailbreak whether anyone does not work out an iPhone through Recovery Mode..
Extension to work with files in the web client
Fixing the error "Server refused access via POP3" when connecting Gmail mail!
1 does not start on windows 10