How to find out the network card model? Easy way. How to find out what I have a network card how to find out the GUID network card

For example, you restored the system from backupBut on someone else's iron, and you can't remember the TCP / IP settings of the network adapter, which were in the primary system. Do not be discouraged, everything is fixable. All this can be viewed in the register editor.

1. Click Start - Search (Start - Run in Windows XP / 2003) and enter "Regedit". This command will launch the registry editor.
2. Go to the following registry key:

HKEY_LOCAL_MACHINE
\\ System
\\ CurrentControlSet.
\\ Services.
\\ Tcpip.
\\ Interfaces.
\

Each network interface in the computer has its own unique GUID.
1: DHCP.
Now we know where the parameters are located. Let's look at them in more detail:
Dhcpipaddress
This key stores the IP address received from the DHCP server. In the screenshot below it is 192.168.0.3
Dhcpsubnetmask.
This key contains an IP address network mask. In the screenshot below it is 255.255.255.0
DhcpdefaultGateway.
This key contains the default gateway. Here it is equal to 192.168.0.1
DhcServer.
IP address of the DHCP server itself (192.168.0.1)
DhcpnameServer.
DNS server (192.168.0.1)

2 Static IP Address

In this case, the IP address is not from the DHCP server, but manually prescribed in the connection properties.
Ipaddress
The key that stores information about the IP address. SubnetMask.
Network mask
DefaultGateway.
Default gateway
Nameserver
DNS Server



That is, we can view properties or even change them right in Regedit. How to remove the network adapter missing in the system

Quite often after reinstalling Windows Users are faced with what they do not work the local network and the Internet. Obviously, you need to install drivers, but for what network card unclear. In such cases, users are asked a regular question, how to find out what my network card I have.

How to find out what I have a network card on windows 7, 8 or 10

If you are using operating system Windows 7, 8 or 10, then in order to find out what a network card you need to be offended " Device Manager" The easiest way to open " Device Manager"This is executed command" MMC Devmgmt.msc ".

To do this, click the Windows + R key combination and in the window that opens, enter the command "MMC Devmgmt.msc" (without quotes, naturally).

After that, you will appear before you. Device Manager" Here you need to open the section " Network adapters" This section will display the name of your network card.

Note, some programs can create virtual network adapters, which are then displayed in the list of network adapters in " Device Manager" It is quite simple to distinguish such virtual adapters. Because they have the same name as the program. For example, in the screenshot above there is a virtual adapter from the VirtualBox program.

How to find out what I have a network card on Windows XP

In operating room windows system XP is all exactly as described above. You need to open " Device Manager"Using the" MMC Devmgmt.msc "command and see the name of the network card. The only difference in the Windows XP section with network cards is not called "Network Adapters", but "Network Boards".

How to find out what I have a network card using the command line

You can also find out the name of the network card using the command line. To do this, open "Command windows string"And enter the ipconfig / all command.

After that B. command line Information about all network connections will appear. this computer. On the contrary, the item "Description", for each of network connections The name of the network card will be indicated.

Other ways to view network card information

All the above described methods for obtaining information about the network card use the funds built into the operating system. But you can resort to third-party help. For example, you can use the AIDA64 program. In this program you need to open the section " Devices - Windows devices - Network adapters».

This section will indicate the name of the network card, as well as other information about it.

Computer is a super smart thing. But without a special card, called the network card that stands on motherboardIt will not be able to enter the Internet. Very often, reinstalling the operating system or when there are problems with the network, the model of the network card arises to the fore. So how can I find out the model of the network card?

Then necessary, except for the computer itself, network card, Everest utility and the ability to access the Internet.
What is a utility, the user should know. But the clarification does not prevent - this is a program that decisive auxiliary tasks. You can classify utilities like this: computer service utilities; utilities for expanding functions; Information utilities.

• by clicking on "Administration" in the "Control Panel" open the Computer Management window;
• go to "Device Manager";
• click the "Plus" sign next to the "Network Board" string and open a list of maps that are installed;

• typing "CMD" in the "Run" column, run the command line;
• the window will open and enter the "Ipconfig / All" command.

Once the command is executed, information about network boards installed on the computer will appear on the monitor.

How to find out the network card model, inspect the patient

It is possible that the system will not determine the network card. No on it and drivers. Then it makes sense to go to the visual definition of the map model.

You will have to remove the network card from the slot, and the data on the manufacturer labeling to enter the search engine, and any, on the Internet.

Watch equipment ID

The network card model can be defined by "Vendor ID" and "Device ID". Data is entered during BIOS boot. You can use the Everest utility. To do this, the utility is installed, the program window opens and goes to the "Device" tab. Further, in the upper right window, deploy the "Unknown" tab, which stands with a question mark. You must click on the sign that has a network controller string. Then in the lower window you can see the "hardware ID" and VEN and DEV values. Ven is a code that identifies the manufacturer. The device identification is responsible for the DEV code. According to these codes, the program will determine the device, and the information will display on the monitor.

Determine the network card model by Device ID and VENDOR ID. These data are derived when download BIOS. Or you can use the Everest utility. Install the utility, open the program window and go to the "Devices" tab. Expand the "Unknown" tab in the upper right window marked with a question mark. Click this sign located at the Network Controller string. The "hardware ID" will appear in the lower window with VEN and DEV values. VEN is a code identifying the manufacturer, and DEV is a device. The program for these codes defines the device and displays information to the monitor.

If there is a need to urgently learn about the model and the manufacturer, then you need to use Vendor ID and Device ID, finding a website www.pcidatabase.com. Here they simply entered the data obtained to the appropriate fields.

Very simple solution!

Easy and easy to look at the check or warranty card, if the network card is new and already implemented in the computer. Provided that original box From the device prudently stored. By the way, not to throw out the entire computer packaging about the year, remind you with the purchase of the seller Consultant. Another thing, listen to such advice. As practice shows, it is worth listening to. So, having a warranty card, you can always read the full name-name and model of the device, and the manufacturer.

P.S. Here we are with you and answered the question of how to find out the network card model ... As you can see everything simple, and which option is suitable for you better - this is your choice 😉

In contact with