Network card driver for windows 7 maximum. Pack driver for network cards and wireless Wi-Fi adapters

Good day, readers.

Installing a new system to your computer, although it seems at first glance, the most complex operation, nevertheless is not so. If you figure it out in detail, the whole process consists of several simple steps by running which users will get the desired result. But sometimes there are unexpected situations. So, sometimes users gives an error when windows installation 7. What to do in this case? In the article Next, I will tell you about the most common problems associated with the placement of the above OS on the computer, as well as how to solve the way.

There are a lot of options, why it is the operating system that refuses to be installed on your device. Therefore, it is worth watchingly when it is a failure. In the article, we will look at the installation from the flash drive and the CD.

So, if problems appeared during the transfer system files - Even before the selection of sections on Winchester - most likely the problem in the carrier itself. To solve, you need to use the HDD testing program.

Important! Such a situation may occur if the installation is also carried out on a new hDD. To remove the problem, you must first format it and split it into sections. It is best to do this with a different computer.

Another popular reason is incorrect entry of information on the removable medium (or reading from it). This usually refers to CDs, since they are more than other means of transferring data to damage. As a result, the problem with the installation system may appear in any second. Most often in such cases before the eyes appear blue screen With an error. This is usually explained that the file is not found.

In addition, problems occur due to incorrectly formatted media. Usually users set an inappropriate file system.

Sometimes USB 3.0 connectors are caused, since the drivers may not be found in the distribution. It turns out that the device can be seen in the BIOS, but the installer already slows down the process.

Solving common problems( )

There are a number of actions that can be performed to install Oursering X 64 maximum version Or any other continued:

Rare mistakes( )

Sometimes users when they don't work out on their device, remove the hard disk, set to another " iron", Initiate the installation of the OS, and then return the hard drive to the place.

Immediately it is worth saying that such an operation will definitely lead to the desired result, and except the message will appear: " Windows Failed to Start».

All this indicates the incompatibility of the equipment. In other words, the system will require those elements that are already installed all the drivers. And at the same time she will not find them.

In addition, users can see the inscription: ". By and large, this situation indicates all on the same. In this case, the cause may also become an incorrectly recorded image on a portable device. Try to create on another computer. boot disk rebel. The main thing is not to rush and set all the settings correctly.

In rare cases, if you are loaded from the disk, this may appear as a result of connecting the new hard drive to the old motherboard. To work all start, you need to contact the official website of the manufacturer, where the appropriate settings that are set to BIOS should be specified for normal operation.

If you saw the error " Disk Error"When you install a new operating system on a laptop, you should not panic and think about the problems of the hard drive. If you use USB memory, try placing it in another slot - do it until you reach the last. In the case when this arises with a plastic disk, it may be worth thinking about the transition to the USB flash drive.

CD / DVD drives are already practically not used in everyday life, but in some situations it cannot do without them. Due to rare use, some userships face a problem when the drive does not read discs. What to do when this happens on Windows 7, as well as the methods of prevention, told in this article.

Why does not work drive

The problem of reading the disks has several solution options, but first consider possible reasons Faults:

damaged disk;
physical disk failure;
problem with driver;
failure to work OS.

Tip! Before carrying out further manipulations, check the performance of the disc itself. Perhaps the problem is in it.

What to do if the drive does not work

There are several ways to correct the problem. Consider them in order of the frequency of occurrence.

Note! All actions are described for the operating windows systems 7. In Windows 8 and the newer, the program interface in question may differ.

Check hardware

The problem with iron most often occurs in two cases:

bad drive connection (refers to PC);
internal damage to the device.

In the first case, the power loop (left in the photo) and / or data transmission (right) can be inserted not to the end, or have physical damage. The latter refers mainly only to the data transfer loop. It manifests itself, first of all, a quiet crash during flexion this cableWhat does it talk about the need to replace it.

In the second case, the drive cannot read data from the disk due to the accumulated dust, settled on the lens, or due to the burnout of the microcircuit of the reading laser. If such situations occur, it is better to buy a new drive, because it is more expensive to engage in it.

Turning on the drive

There is a chance that the drive disconnected at the program level. This happens due to the system failure or unintentional exposure to the user.

Click the Start menu → "Control Panel".
Go to "System and Security".
Open the Device Manager → Click on "DVD and CD-ROM drives".

If there is not a single drive in the drop-down list, do the following:
Note! The lack of "DVD and CD-ROM drives" in the list means that the computer does not detect the device at the hardware level, which was written above.
After that, the reading of the disks should work.

Reinstall Driver

The need to reinstall the software that is responsible for the performance of the actuator occurs when the system fails (less often - due to viruses) or OS updates.

Removal by

The problem of using the drive sometimes occurs due to the multimedia programs that create virtual devices. The most famous of them: "Nero", " Daemon Tools."," CdBurnerXP ".

To remove such a better to use a third-party utility (for example, "Uninstall Tool"), and not an embedded Windows tool.

Run "Uninstall Tool".
Select the program to create virtual drives → "Uninstall".
Delete will start. Confirm the selection.
There will be a search for the remaining files and records in the register of deleted by software. When discovering such elements, delete them.
After completing the uninstall procedure, close the notifying window and the utility itself.
Restart the computer.

System Restore

Performing previous actions does not guarantee the correction of the situation, since Windows may have critical errors. Eliminate the built-in system restore tool will help.

Important! This procedure is possible only if the PC is already there is a recovery point created earlier.

Open in "Start" → "All Programs".
Go to the "Standard" → "Service" folder.
Run "System Restore".
In the window that appears, click "Next".
Select the last → "Next" from the list of recovery points.
Upon completion of the process, click Finish.

After that, the computer will be rebooted and the drive must earn again.

Important! If there is no recovery point on the PC, then a complete reinstalling system is necessary. How to do this, reviewed in the "Reinstalling Windows Reinstall without Limit Loss".

conclusions

This article discusses several ways to solve the problem related to reading CD / DVD drive disks. The proposed options are suitable for PCs and laptops. Check the physical serviceability of the drive, after which go to the program procedures.

Consider many ways of error "Installing Windows on this disc Impossible. The selected disk has the GPT sections style. "Previously there was an old section of the MBR disc partition and it could no longer act with a new number of TR (Terabyte). Invented the GPT system for disks and it was introduced with a new graphic Bisos UEFI. Let's start the submitted dilemma . standard means. I want to note that some users described their actions that simply enter the BIOS and disable the UEFI mode. It all depends on the set of factors, in the flesh before the architecture of Windows, 64 or 32 bit.

Solutions Methods: Installing Windows for this disc is not possible. Selected disk have GPT sections style

1. Change UEFI download mode

Nowadays, most motherboards support both traditional download and UEFI BOOT. Users can choose the most suitable BIOS. Watch carefully! BIOS All diverse.

Change value UEFI, instead CSM. In the Feature section or Setup.
In the Peripherals string to overlap SATA mode: Ahci. Instead of IDE.
(This item is not required, try it if it does not work above). In the Key Management string, the Secure Boot feature, which is posted on the BOOT tab, change the Other OS. Watching Windows UEFI MODE.

If you write down from the flash drive and does not work on this method, then overwrite. Unforgettable! Click F10 to save the settings.

2. Deleting partitions when installing Windows

If you do not mind the data and you want to do everything quickly, you will delete all the sections when installing Windows, and then format the entire hard disk. After that, create a re-sections that you need. Thus, a new table on the hard disk will be asked.

Delete all disk partitions.
Create them again.

Format ( Method will erase all data).

3. Convert or Conversion of the GPT disk in MBR

Method will erase all data.

When an error appears, click OK to close the error message, and press the SHIFT + F10, SHIFT + FN + F10 buttons (for laptops), to invoke CMD (command line). If nothing works, then return a step back to the Windows installation interface and press the SHIFT + F10 button to start CMD again.

We enter subsequent commands on the schedule: diskPart -\u003e List Disk -\u003e Select Disk 1 -\u003e Clean -\u003e Convert MBR. Line translation: DiskPart -\u003e Disk List -\u003e Select Disc 1 (1 Indicates the number of GPT drive) -\u003e Clear -\u003e MBR conversion. In the picture you can see which teams were introduced. You can typing codes in the string based on the drawing. When the DiskPart program converts to the MBR format, you can exit this program and continue installing Windows.

4. Apply the standard disk management utility

If another OS is available on your laptop or it is possible to create a loading Life DVD, USB flash drive. It will be possible to use standard Program In Windows "Disks Management". You can still connect your HDD hard drive to another computer.

To start the program, click "Start", right-click on my "computer" or icon on the desktop, choose in context menu "Management" and "Disk Management"
Delete all partitions or volumes on the disk one by one through the right click, "Delete TOM". DELETE VOLUME)

When an unoccupied space becomes on the disk, click on the disk and select " convert to MBR drive"(Convert to MBR Disk). After these steps, the original GPT disk It will be converted to the MBR disk, and then you can proceed to installing Windows to this disk.

If you still think that the installation operating system - This is a lesson for computer craftsmen, then you are seriously mistaken.

Using this manual, you can install Windows 7, even if you are a novice PC user. So, first preparation.

Open "My computer" And look at what section you have the system at the moment.
Remember its size and name to then find the desired volume when installed.
Collect on the USB flash drive or another disk all required drivers For computer or laptop. If there is no drives with drivers, you can download them on the official website of the equipment manufacturer. If you do not do this, then risk after installing a new system to remain without the Internet.
What kind of discharge of Windows 7 choose -? Click « Control Panel -\u003e System and Security -\u003e System»

If more than 3 gigabytes are installed on your computer or laptop random access memoryunambiguously worth installing 64s discharge version. In general, the X86 recommend putting only on a weak or very obsolete iron in the yard of the 21st century, all the same :). Please note the driver for the same device in them differ in essence these are two different systems!
Download Installation ISO Image Windows 7:
What are these images?
These are original MSDN images downloaded from the official Microsoft website. The only change is unlocked the ability to select the editorial board when installing. No files are affected, the system is not activated.
Other veras windows images 7 can be downloaded.
Prepare a bootable USB flash drive with Windows 7. In this manual, we will install the system from the Flash drive, because it is faster and easier. Similar instructions how to create it can be found.
Since when installing, we will format the disk with installed system, all the important files that are stored on it must be pre-copied to removable media or another section hard disk. Remember that the files located on the desktop are also stored on the disk with the system. If you need them - you definitely transfer them to another place. When formatting, all previously installed programs will be deleted, but this does not mean that they also need to be copied to flash drives and discs. Programs are easier to re-establish, so take care only about - Photos, documents, music, etc.

Create a bootable USB flash drive. Next, insert it into the USB port and change it BIOS-E Maternal Board boot priority in such a way that this flash drive is loaded. If difficulties occur at this step - here detailed instructions . If you have done everything correctly by changing the boot priority, then after exiting BIOS and restart the computer, the message "Press Any Key" will appear on the screen. Perform this requirement - press any key to start loading from the installation media.

Click the key only once and only at this stage of installation.

After pressing any key, a message appears that Windows downloads files.

System installation

So, proceed directly to installing Windows 7. Wait until your extraction is completed, after which the installer startup window appears on the screen. Congratulations, the most difficult already behind!

Select language, time format and layout. Click "Further".
Click by big button "Install"To launch the installation wizard.

Attention!

Note: Choose TU windows versionFrom which you have an activation key (you will be entered at the final installation stage). If there is no key - learn the instructions after installation.

Check out the license terms and accept them.
Select a complete setting (no update suits us).
After launch full installation A selection selection screen appears.In the installer window there will be several sections: First Usually reserved by the system (the recovery files are stored). It weighs 100 MB and you do not need to touch it. Second It is a system - that is, Windows stored on it. It is set to install a new system. The third Section - File. The user data that remains intact even after reinstalling Windows are stored here.
There may be other options: for example, no reserved partition system or no volume with user files. In any case, you need the partition on which already stood previous System - Not in vain when preparing for installation, we advised you to see and remember its size.
If for some reason you still have one section, the volume of which exceeds 250 GB, then it is better to immediately divide the disk into two volumes: one for Windows and programs (about 50-100 GB), the second for personal files. To do this, using the "Disk Setup" tool, delete the existing partition and first create the first volume ("Create" - specify the volume - "apply") and then the second one.
Created volumes must be called "Section 1", "Section 2". There should be no unstable space - its system simply will not see.
So, you have a minimum two partitions, one of which is allocated under the operating system files. If he is not just created, and was already previously, it needs to format, deleting all the data.
Click on the link "Disc Setup", highlight the section and click "Format". When formatting all files with system partition They will be removed (that is, the values \u200b\u200bin the columns "full size" and "freely" will become the same). This is what we achieved. For start clean installation click "Further"By checking again that the partition that you was allocated to the system is highlighted.
We wait. After selecting the section and start the installation, a window will appear on the screen in which you can see the unpacking process. windows files 7 and their records on the hard disk. While you can relax - 15-25 minutes do not have to do anything.
During this installation time, the computer will reboot several times. After the installation is complete, you need to specify some system operation settings.
Enter computer name Computer name The computer name is how your computer will be called on the local network. and username. It is advisable to use Latin characters instead of Russians, it will help to avoid problems with some programs in the future.
If you wish, you can install the administrator password, but it is optional. If you set a password, it will need to be entered each time the computer is launched or laptop. We will leave the field yet empty, "pass through" account maybe later.
Enter the activation key if you have it. If there is no key, remove the mark "Automatically activate" And skip the step by clicking "Further".
Specify windows settings - Better to choose recommended parameters when you learn better new system, set it up in your own way.
After selecting all the necessary parameters, the screen will appear on the screen. You can start your acquaintance with the system, but first overload the computer and go to the BIOS again - here you need to change the priority of the download, setting the hard disk.
Turn on automatic update Systems and wait for the end of the process. With security updates, most drivers will be installed. If there is no Internet, you can use the program to install the drivers .

The instruction turned out to be sufficiently impressive by volume, but you now know the main nuances when installing Windows 7 and can easily do it yourself. Carefully follow the recommendations specified above and the installation will definitely pass successfully.