Reinstall Windows BIOS. Installing Windows XP - installation process via BIOS

This article is devoted to issues. installations on windows computer 7 via bios.. The most general case of installing the operating system using external media is considered: flash drives or CD / DVD.

Through the BIOS select the device to start installing Windows 7

Step 1. Insert the disk from Windows 7 to the DVD drive of your computer / laptop and restart it. Go to BIOS.: This can be done when the computer / laptop starts uploading (the first boot screen appears). In most cases there is an inscription (Fig. 1), inviting to enter the "BIOS SETUP". For example, she may look like this: PRESS DEL TO ENTER SETUP. On the different computers Calling "BIOS SETUP" can be carried out differently: by pressing the button F1 (found in separate implementations of Phoenix BIOS), F2. (on the motherboards Intel and in the case of some versions of Phoenix BIOS), F10 (one more options for Phoenix BIOS), ESCPressing a combination Ctrl + Alt + ESC, Ctrl + Alt + Ins or Ctrl + Alt.. Simply Del. - The most common option. Usually, the way to log in to "BIOS SETUP" is indicated when loading, it can be found in the manual to the motherboard or to the computer / laptop. If necessary, you can familiarize yourself with the general information about.

In Bios, enter the "Boot" menu (Fig. 2) -\u003e " Boot Device. Priority "And for the first item" 1st boot device "set the value" CDROM "(Fig. 3) or" USB-Flash "(depending on the media of the information).

Fig. 1. The initial screen download screen or laptop. To enter the BIOS, click the desired key combination

Fig. 2. After entering the BIOS, select section boot

Fig. 3. In the Boot section, you must select the priority of the device polling

By the way, it is sometimes impossible to load the OS. This happens because.

Running Windows 7 installation via BIOS on computer

Step 2. As soon as you select to download a disk / USB drive from Windows 7, a window will appear offering to press any button (inscription: Press Any Key to Boot from CD or DVD). Press any button, for example a space. This is the window:

Fig. 4. Press Any Key to Boot from CD or DVD. For loading installation Files Press any key

Fig. 5. Progress or indicator of downloading installation files appearing after pressing any button

After a few seconds, you will see the Windows 7 Installation window:

Fig. 6. First window windows installations 7

Settings before installing Windows 7 on a computer or laptop

Step 3. Select "Russian Language" and press "Next". After that, this window will appear:

Fig. 7. The second Windows 7 installation window. Click "Set"

Fig. 8. Third Windows 7 Installation Window. Take the Terms of License Agreement

Fig. 9. Fourth windows of installing Windows 7. Select option

I recommend putting the clean installation of Windows - " Full setting" With this embodiment, the system disk is formatted and, accordingly, previous version Windows and all data, parameters and settings will be completely removed, which will help to avoid possible failures and errors. This is the most reliable installation method.

There are cases that Windows is buggy for one reason or another: whether the file is lacking, or something else. In this case, you can try to update Windows by selecting the first item - "Update". At the same time, all program settings, drivers and your data will be saved. But, since everything is saved, then with the same "success", all problems of programs or other errors are also saved, which can lead to failures in the work of the new installed Windows. If the system starts, then windows Update 7 It is best to run from the Windows environment itself.

Fig. 10. Five Windows 7 installation window. OS installation location

If the disc is new and not marked, then there will be a picture like mine. If it is divided into sections, all your HDD sections will be presented here.

Choose disk "C". Format it to erase all the information. To do this, click on the "Disk Settings" link. Next Menu should appear:

Fig. 11. Additional formatting menus hard disk

Fig. 12. Sixth Windows 7 Installation Window. Installation Progress

The main work is made. The installer program will do everything else independently. The installation procedure will take about half an hour. At this time, you do not need any intervention, so you can safely move away from the computer and do your affairs.

Here you almost managed to install Windows 7, nothing remains.

After the installation is completed, you will need to create your account. Come up with your username and enter it in the "Username" field:

Fig. 13. Completing Windows 7 installation. Login selection

Then you will be prompted to come up with a password for your account, password is not required and, if, besides you, no one else uses the computer or you do not have confidential informationThat you want to save, the password can not specify.

Fig. 14. Completing the Windows 7 installation. Password selection

In the next window you must enter serial number you copies of Windows 7:

Fig. 15. Completing the installation of Windows 7. Key selection

Choose Windows Protection Settings. In most cases, the first option is suitable - "Use Recommended Parameters":

Fig. 16. Completing the installation of Windows 7. Selection of system protection option

Set the system time:

Fig. 17. Completing the installation of Windows 7. Installation of system time

Select Network Option. For most users, the Option "Public Network" is suitable:

Fig. 18. Completing Windows 7 installation. Network option

And after all these small settings, the desktop of the newly installed Windows 7 will boot in front of you.

That's all. As you can see, install Windows 7 is not at all difficult, it is not more difficult at all than installing any other program. And available to any user. Therefore, if you have doubts about your capabilities, throw them away and proceed to install the operating system on your own and do not be afraid.

That's all! Thank you for your attention to new meetings on site pages.

Often on the Internet you can see the question "How to install Windows via BIOS?", U experienced user He is a smile, but his essence is: what to do in BIOS to start installing the operating system?

First of all, we need to have an image of an installation disk with operating system WINDOVS. Then choose from what we will install our operating ( DVD drive / External DVD, or flash drive).

Now go directly to the settings in the BIOS. Depending on the manufacturer, after turning on the computer, press the DEL, or F2, or F10 key, or ESC to get into the BIOS settings (there can now meet other combinations, find out what exactly you can use the manufacturer of the equipment).

Next, we need to find the BOOT section, or Boot Device Priority, or Boot Device Configuration in which we will set the boot priority (where the system will be loaded when and in which sequence). Here you can install the first DVD drive (internal, external USB), a flash drive or floppy (this is not a joke in my experience was installed Win98 using 147 disks)

After that, you need to save the changes and restart the computer.

In new equipment, and especially on laptops in order to provide intelligent ownership rights in BIOS, there is a UEFI mode that needs to be turned on / off to be bootable from a flash drive or optical drive.

It is important to remember that the load priority on a large number of equipment can now be selected and without changes in the BIOS, when starting, you need to press ESC or F10, or F12.

Determine the BIOS settings for a specific Matkart, you can see them in the motherboard passport.
Important! Incorrect BIOS parameters can display a computer or reduce power index.

Management information.
How to install windows via BIOS, downloads from DVD, USB, HDD depends on multiple keys Boot Menu

It is necessary to get into the BIOS system: restart the PC and log in to "SETUP" - software that is responsible for the original loading of the computer.

During the reboot, closely follow the inscriptions on the monitor screen, you need not to skip the string that appears below, with such text:
"Press ____ to ENTER SETUP".

The program suggests how to get into the BIOS, you must press the key that is spelled out on the screen, it can be:

F1, F2, F3, F10, DEL, ESC - on different computers, they differ, depending on the BIOS version.
Press the key until the system will not redirect to Basic Input-Output System. A list of tabs will appear on the screen, you need to select the desired, which refers to the loading of devices - "Boot Devices" or "Advanced Bios Features".

If it did not work out the prescribed actions from the first time, you should not despair, you need to repeat all actions a couple of times.

Select the tab to go, you need to click the "ENTER" button. After that, in the drop-down list, find the Boot Sequence tab and the correctness of the choice of information that appears on the right on the monitor screen. It should be said that the selected tab is responsible for the priority of devices loading.

After the download tab is defined, controlling the input keys, you must set the priority so that the first CD-ROM is in the list, or the boot device.

With which the whole process will be held. To do this, select in the list "First Boot Device" and then hDD.

You need to confirm the correctness of the choice and click the "OK" button.

So all settings bIOS systems To download and reinstall Windows ready. It was all carried out for the next time the PC will be rebooted, the OS itself redesigned windows download From the previously selected disk.

In order to start the download, you must restart the computer.

To install Windows through the Basic Input-Output System from a flash drive, in fact, the entire procedure is similar to the above, but you need to select BOOT in the BBC system in the BB system, or in the OS with a simple version of the "overlay" of the versions to select the appropriate menu item.

The installation process of Windows from a flash drive does not start and on the monitor is shown Black Screen:

UEFI mode is enabled;
The flash drive is formatted in the NTFS system;
BB BPS only supports NTFS sections, UEFI - FAT 32.
With a new version of the system for downloading from a flash drive, requests permission to automatically mode. It is best to abandon such an offer, otherwise the OS can not be installed on the part that is needed or deleted part of personal files.

Before installing the BIOS settings, you must select using "+" or "-" and click on the BOOT tab.
When choosing settings, you need to save them. To do this, you will need to press the "F10" key - "Save and Exit". You can also perform this action by pressing the "-\u003e" key - "Exit Saving Changes", i.e. "Exit and Save Changes."

After the approved and selected option and priority of the device load, you need to select the F10 option, after which you restart the computer.

For novice users who need to reinstall Windows via BIOS specialists have developed some tips for competent and fast flow process.

For a well-confiled BIOS system, special attention should be paid to these recommendations:
Requirements for PC (provided windows 7):
Memory - minimum 1 GB;
Processor - minimum 1 Hz;
Video card is a minimum of DirectX 9.
Time to work in the BIOS.

How much does the setup process and the new version of Windows? It all depends on the technical parameters of the PC:

Speed \u200b\u200b"Clock Speed";
Number of cores "Cores";
Main frequency "800/1066/1333/1600 MHz".
On average, to install windows through the BIOS will need one hour.

Clean and simple Windows installation processes

Clean installation is the start of the disk with the system in manual mode, during the launch of the computer. After that, hold the start, click on any button, after the test of the inscriptions "Press Any Key" appears on the tap.

The BIOS indicates the location of the new OS, for example, on CD / DVD or on the hard disk, so that the old version does not use at all, or has been removed. Clean option is used for any OS: UNIX, DOS, Windows XP, as well as Linux, Windows 8 and Windows

Simple rarely applied and is not recommended. This is because a new version It starts with a CD / DVD disk already installed by an old OS. So simple installation More like the process of "overlay", since the new version is superimposed on the old version.

Differences of installation processes

Simple installation windows:
Starting a computer;
BIOS;
Operating system;
BIOS;
Installation.

Net installation:

Starting a computer;
BIOS;
Installation.
Pure installation.
Sections of the hard disk of the operating system.

Often during clean installation, All sections are formatted and old versions and files are deleted. If you need to reinstall the system with multiple divided discs where important files are stored, you can leave information unchanged.

No need to format disk D, however, disk C with files old versions of Windows will be formatted.

Analysis of the hard disk when installing.

Before you run the installation of Windows (with non-working, failures and glitches), you need to try to use the last chance of restoration and cleaning from malicious programs.

With pronounced problems with the work of the PC, it is necessary, first of all, check the status of the hard disk, analyze the operation of the segments, otherwise even during the installation of the system, the formatting process may hang or unstable.

Saving personal information.

Personal data and information is a very important component that is not always possible to restore, in case of deletion or damage, so before you reinstall, you need to take care of their safety.

To save information and personal data when reinstalling Windows, you need to copy and transfer all the necessary files to the portable media (disk, flash drive, etc.). It is also very important to save passwords, for this it is recommended to use the Backup program or do it in an old-fashioned one, manually.

In accuracy, following the rules and tips, you can understand how to install Windows through the BIOS to the computer even a person, without special skills and experience, in such situations.

BIOS setup under Windows 7.

During the BIOS settings, difficulties arise to install any operating system, since the versions may differ among themselves. First you need to enter the bios interface - restart the computer and until the operating system logo appears, press one of the keys in the range from F2 to F12 or Delete. In addition, key combinations can be used, for example, Ctrl + F2.

Further actions depend on the version.

Ami Bios.

This is one of the most popular Versions of the BIOS, which can be found on motherboards from Asus, Gigabyte and other manufacturers. The AMI setup instructions for installing Windows 7 looks like this:

After you entered the BIOS interface, go to "Boot", located in the top menu. Moving between items is carried out using the arrows to the right-left on the keyboard. Confirmation of the selection occurs when you click on ENTER.

A section will open where you need to put the priority of the computer download from certain devices. The default hard disk with the operating system will stand in the 1st Boot Device item. To change this value, select it and press ENTER.
A menu will appear with the devices available for downloading the computer. Select the media where you have a Windows image recorded. For example, if the image is recorded on the disk, you need to select "CDROM".

Setup completed. To save changes and exit BIOS, click on the F10 and select "Yes" in the window that opens. If the F10 key does not work, then find the "Save & Exit" item and select it.

After saving and output, the computer will restart, loading from the installation media will begin.

The BIOS from this developer is largely similar to similar from AMI, and the instructions for setting up before installing Windows 7 looks like this:

After entering the BIOS, go to "Boot" (in some versions it may be called "Advanced") in the top menu.
To move the "CD-ROM DRIVE" or "USB Drive" to the top position, select this item and press the "+" key until this item is placed on the top.

Exit BIOS. Here pressing the F10 key may not work, so go to "EXIT" in the top menu.
Select "Exit Saving Changes". The computer will restart and setting Windows 7.

Additionally, nothing is required.

Phoenix Bios.

This is already an outdated version of the BIOS, but it is still used on many motherboards. The instruction on its configuration is as follows:

The interface here is represented by one solid menu separated into two columns. Select the option "Advanced Bios Feature".

Go to "First Boot Device" and press ENTER to make changes.

In the menu that appears, select either "USB (flash drive)" or "CDROM" if the installation occurs from the disk.

Save the changes and exit the BIOS by clicking on the F10 key. A window will appear, where you need to confirm your intentions by selecting the "Y" item or by clicking on the same key on the keyboard.

In this way, you can prepare a computer with PHOENIX BIOS to install Windows.

UEFI BIOS.

This is an updated BIOS graphical interface with additional featureswhich can be found in some modern computers. Often there are versions with partial or complete Russification.

The only serious disadvantage of this type of BIOS is the presence of several versions in which the interface can be strongly changed due to which the desired items can be in different places. Consider the UEFI setting to install Windows 7 on one of the most popular versions:

In the upper right side, click on the "Out / Additional" button. If you have UEFI not in Russian, then the language can be changed by calling the drop-down language menu located under this button.
A window will open where you need to select "Additional Mode".

Advanced mode with settings from standard BIOS versions, which were discussed above. Select the Download option located in the upper menu. To work in this version of the BIOS, you can use the mouse.

Now find the "boot option # 1". Click on the value installed opposite it to make changes.

In the menu that appears, select a USB media with a written Windows or CD / DVD-ROM item.

Click on the Output button located in the upper right side of the screen.
Now select the option "Save Changes and Run Reset".

Despite a large number of Steps, in operation with the UEFI interface, there is nothing complicated, and the probability of something to disrupt the wrong effect is lower than in the standard BIOS.

If you needed installing Windows 7 from a flash drive through bios, then our article will become an excellent helper.

Installing a new operating system on a computer is a fairly frequent problem that may arise due to the slightest failure in the system or actions of the inept user PC.

This question has also become relevant in connection with the statement of official representatives of Windows for suspension. technical support operating system XP.

To date, almost all users completely switched to the so-called seven.

Our step-by-step instruction will help easily and quickly return the computer to life.

We prepare the computer to reinstall Windows

Before starting work on new software, it is necessary to properly prepare your PC. First you need to remember what important information Stored on a computer and save it to a portable storage device.

Special attention should be paid to local disk C, it is that it is preserved the greatest number information. Almost all users store their media files (photos, video) in the My Documents folder or directly on the desktop.

These files are often located on the disk along with the already installed OS. You can also use the free space of another local disk to save information.

Very important before reinstalling Windows Check if there is a driver for a PC for network card.

If you do install new system via USB, and then it turns out that there are no drivers for a network card in the distribution, then you will not be able to configure drivers and an Internet connection.

For your own confidence, it is better to maximize the presence of drivers. In addition, be sure to check if you have drivers for sound card, audioparticles, video cards, etc.

Preparing flash cards to software installation

To install the operating system from the flash disk, we recommend following the following rules:

• The minimum volume of the flash drive should be 4 GB. This number of space is required to save all important components and files;
• Mandatory preparation of the Windows 7 distribution for recording and preserving its image (* ISO format);
• Selection of the program to create a disk image.

Tip! One of the best utilities to create a disk image is considered ultraalso. Latest version Located on the developer's website

We install and run on the PC utility, and then select the selected disk image in it. Step-by-step instruction The use of the program will help to quickly understand all intricacies.

1. Running

2. Now it opens the main working window.

3. Go to the hard disk image

4. Now you need to connect flash memory and enable formatting. When the formatting process of the flash drive is over, you can start recording.

5. At the end of the entry on the space of your flash drive, there will be Windows, with which you are reinstalled.

Comment! To create a flash drive to install the system via BIOS, you can useWindows.

Configure BIOS to work with the loading flash drive

One connection of the installation flash drive to a PC to install the new software is not enough, you need to pre-configure the computer so that it starts to load it when it starts.

All settings are made in BIOS. Any laptop, the computer has a BIOS, which stores important settings, including, it remembers, in what order devices must be loaded. It is this setting that we need now for further fruitful work.

To start the BIOS, you need to hold down or press on the computer certain key on keyboard.

To learn about what key we need, you can from the information on the monitor. As a rule, these keys are ESC, DELETE, F2. If you entered BIOS, then you will appear one of the following screens:

With an unsuccessful input attempt, restart the computer again and re-try to start the BIOS. To facilitate your task, we placed a table with the main options for the included BIOS.

Combinations of keys to enterBIOS depending on the manufacturerBios.

Basic key combinations for runningBIOS depending on the manufacturers of the laptop and computer

After you hit the BIOS, you need to find an option that is responsible for loading devices. Usually it is in the menu and the word BOOT is present in its name. Other options are not excluded, maybe even you have to search.

Let us give a few examples:

As a rule, the choice of the main device for loading occurs by pressing the arrows on the keyboard, although sometimes there are other management methods. If it is impossible to understand yourself, then refer to the help that shines in the BIOS.

In our case, the role of the first boot device is USB-HDD (maybe another name). After its choice, you must exit the bios while saving all settings using the Save and Exit Setup item.

After that step, the computer must reboot and we will turn to the main stage, for which we are here and gathered.

Install Windows 7 with a bootable flash drive

If everything was recorded on the flash drive space, and faithful settings are made in the BIOS, you will see the following message on the monitor screen, which states that you should press any key to activate the download.

If there is no such inscription, it means you have to check your actions. To do this, go to the BIOS and make sure that the download setting from the flash drive is preserved. If there are no errors in BIOS, then, most likely, you failed to create a bootable flash drive and you need to re-repeat the entire process.

If there is an inscription, you congratulate you, your installation Windows New Versions through bios began. Some installation images beyond the operating system itself also contain different additional programsThen you will have to choose the required meat in the menu.

It is also worth saying that part of the disks by default performs most of the described settings. It is not worth worrying because of this, since all settings can be changed after the software installation process is completed.

The greeting screen appears before you, where you choose the necessary data. After the setting is made, you should click on the "Next" button, and then "set".

In a new window, we appear the terms of the license agreement that you, of course, read very carefully, and then agree with the tick in a specially designated window and pressing the "Next" button.

The final stage of the installation

In a new window, you have to choose which type of installation we need. We need a complete type. Next will have to work a little with a disk, a new version of software will be recorded on the space.

To do this, select the desired disc partition in the menu and click on the "Disk Setup" button, after which you run formatting.

About how it is done, we have already been described above. Here you just need to change with USB-HDD to the name of your disk. This is a very easy action that should not cause any difficulties with you.

Upon completion of the reboot, the installation of Windows will continue.

1. We enter the names for the computer, laptop and for users.
2. Installing a password if it has a need.
3. Enter the name licensed keyif it is (you can skip this step).
4. Select security settings ("Recommended Parameters").
5. I exhibit the date, time.
6. We carry out network setting.

Thanks to these simple actions, you can install Windows 7 through the BIOS using a flash drive.

Installation of the operating system - one of the most difficult, but at the same time, one of the basic maintenance skills personal computer. A system installed on a computer can be crash at any time, as a result of which it will be possible to continue working with the device only after the Windows is restored. Even though the system is constantly being improved, and its stability to failures and errors increases, the user still needs to be ready to be able to restore the performance of the PC at any time.

Installation via BIOS, as a special case - the most reliable way to get rid of problems in the previous installed operating system, formatting a hard disk and installing everything from scratch. If the user decides to install Windows via BIOS, then it will be necessary to prepare the drivers for all computer devices in advance (most often shipped on a platform with a PC), and also have the operating system distribution itself on the hands. Also, changing parameters base system Computer I / O, it is worth being very careful because the incorrect BIOS parameters can also cause the computer breakdown.

Fast navigation on the article

Preparation

Before starting reinstallation, you will need to study the contents of the disks that were supplied with a laptop or computer. One of them should be software For a video card, sound card, network adapter and other devices. It is also important that the versions of the drivers on the disk are intended for the operating system that is installed on the computer.

If there is no disc, or if the versions of programs are outdated, it is recommended to visit the site manufacturer's website (device manufacturers) and find a section with downloads, from where and download to removable media current software versions.

It is also worth taking care of the presence of the desired version The operating system itself. It must comply with the characteristics of the computer and the requirements of the user itself, as well as to be licensed. So, it can be a box version of Windows from the store, or created using the formal means (Media Creation Tool) Installation medium.

Reinstall

In fact, the BIOS itself is involved in the installation process only indirectly. In it, the user indicates which device you need to scan the first for the availability of the operating system files. By default, the hard disk is specified there, so the computer loads the installed system. The user must specify the main device drive or USB carrier so that the computer launches the installation program.

To do this, you will need:

• Turn on the computer.
• Carefully monitor the inscriptions on the very first screen, which is shown immediately after pressing the power button. Usually at the bottom of the screen it is written, which button you need to click to get into the BIOS. Some computers also indicate a button that allows, bypassing unnecessary settings, change only one parameter associated as once with the main device.
• Go to the BIOS itself using the specified button.
• Open the section "Boot" or "Device Priority".
• Using the controls on the keyboard, install USB or DVD-ROM as the first (first) device.
• Using the ESC key, return to the BIOS main screen.
• Select the "Save and Exit" parameter.

After that, the computer will start re-enabled. When the inserted media is detected, the computer will ask to click on any button to start the installation.

Further, the process will go in semi-automatic mode and will require only the minimum user participation. The installation program is accompanied by Russian-speaking prompts and at each step will explain what to do. At the end of the Windows installation, you only need to install all drivers with a pre-prepared media (if they were not automatically installed with the system) and install all the programs you need for the daily operation.

Installing Windows 7 from a flash drive through the BIOS today is the most relevant solution for solving the issue associated with the seven independent installation process. Why? The thing is that the time of popularity of disk drives has already passed, which means that many people are trite there are no DVD-ROMs. On the other hand, for Windows 7, the installation procedure is not provided that today is actively used during the transition to the top ten. Fortunately, on any computer there is a USB, therefore, most users have only such a variant of action.

To install Windows 7 from the BIOS flash drive, you must consistently implement several stages:

• Prepare a source;
• Change the equipment settings so that it is possible to implement the conceived;
• Directly run and execute the installation process.

This article will give all necessary information For each of these stages. After reading it, the installation of Windows 7 will be able to even a smartly serious user.

Of course, there are other options for creating a loading flash drive with a seven, but the use of an absolutely free RUFUS utility makes the solution to the task as simple as possible.

So, to successfully complete this stage, you must repeat the following actions:

1. Survey and download the operational image with the operating system, which is planned to be put on the PC.
2. Search utility and similar download. By the way, it is easy to detect a portable version, that is, it is not even pre-installed the program will not need.
3. Connect an external drive that is planned to be used for recording. Check for the availability of information on it important. If this is present - transfer it to another place.
4. Run the program.
5. When the flash drive is connected, the utility will immediately issue information about it in the "Device" window.
6. In the second point it is recommended to stop the selection on the MBR for computers with BIOS or UEFI. This type is suitable for most of the most options for modern technology.
7. The next item can be easily ignored, as the utility will select the optimal option independently file System When adding a writable image.
8. It remains only to mark the checkboxes where it is written about the quick format and creating a boot disk.
9. Before starting the procedure, you will only need to specify the path to the writable image and click on the Start button.
10. The utility starts its work, the success of which can be followed by the slider at the bottom of the window.

After the message is "Ready", you can proceed to the following steps in the implementation of the task.

Setting BIOS for installation from flash drive

Before you begin to make such changes, it is initially recommended to go to section hard The disk that is planned to be used for the seven. The fact is that the installation of the OS will automatically erase all the information on it. Consequently, you need to make sure that nothing important on it remains. After that, the following actions are performed:

1. The restart of the PC is initiated.
2. At the very beginning of this process, a button is pressed, allowing you to enter the BIOS. In most cases, it will be necessary to click on "DEL". Although there are other options. For example, "F1", "F2" and so on - depending on the manufacturer of the equipment operated.
3. BIOS screen also for different models may have differences. However, in all of them you can find the item below the name of the first boot - it allows you to set the priority of the devices from which the download will be performed.
4. It should be opened and rearranged the priority for USB or USB-HDD - who has.

Naturally, the flash drive must already be connected. The further changes are saved and you can leave bios. If everything is done correctly, the computer will start running the installation program.

WINDOVS installation process 7 with USB

The further process is very simple - the main thing is to make the right actions:

1. Select your preferred language and keyboard layout.
2. Read and agree with the agreement from the developers of the OS.
3. Select a hard disk that will be installed.
4. The program will issue a warning about the need to format the section and erasing the entire information on it.
5. It is necessary to agree with a similar condition and launch the installation procedure.
6. For some time, everything will occur in automatic mode. After the appearance of an information message about the completion of work, you will need to click on "Next".
7. Personal data of the equipment owner are introduced. If the password is not needed to enter - just leave an empty string.
8. When using the licensed version of the product - the key is inserted, which should be in a person.
9. Time and network settings are performed.