As in the Word, remove the mode of limited functionality. Limited functionality mode in Word program - how to remove

If you open a Word document, at the top in square brackets, you see a message: "Mode limited functionality» , then the question immediately arises: "What is it, and how to remove it?". This will be discussed in this article.

What does this inscription mean

In the Word, this inscription appears near the title if you opened the file created in an earlier version. text editor - 2003, in the new version - 2010. For example, you worked with a file at work, came home, opened it on the computer and saw the above unusual inscription. This means that in the workplace is Word 2003, and you most likely costs more a new version - 2010 or 2013.

The fact is that after the Word 2007 version appeared, the format of the created documents has changed. In 2003, the files were stored in * .doc format, and more new versions - 2007, 2010, 2013 and 2016, in * .docx format.

If the file is open in limited functionality mode, then the text editor works as an emulator. At the same time, you will not be available some functions that developers have added to new versions. For example, editing formulas, new numbering styles, Wordart objects, some topics and so on.

Turning off the mode

If you need to remove the message at the top and work with a Word to the maximum, then enough, just hyphenate the file in a newer format.

Open the desired document and go up on the File tab. From the opening list, select.

I have Word 2010. If you have 2016, then instead of a separate window, the menu will unfold. In the field on the right, specify the folder on your computer to save and select the said "File Type" with the * .docx extension. Then click the Save button.

This dialog box appears. It says that the document may be slightly changed. For example, some styles are removed, and all formulas will become pictures and it will be impossible to edit them. Click "OK".

After that, you can use all the features of the Word program, which is installed on the computer, when working with the document, the message above will disappear.

Remove this mode

You can do everything as follows. Open the document you need again and go to the File tab. In the "Details" section, click on the button.

Confirm the action by clicking OK.

The string at the top of which is written about the restrictions, will disappear, and you can use all the new features of the text editor installed. Save the changes or clicking on a floppy disk in the upper left corner, or by pressing the Ctrl + S or SHIFT + F12 combination.

Some styles can be removed in the transformed file, and all formulas will become pictures.

This method is different from the fact that the original will not be saved, it is simply transformed. And the use of the power being used, which is described in the first paragraph, will allow you to maintain both the original document and its new optionin which there are no restrictions.

I think you managed to remove, one of the methods described in the article, a string in the document in which it is written about the restrictions.

Rate article:

(7 estimates, average: 4,29 out of 5)

Webmaster. Higher education in the specialty "Information Protection" .. The author of most articles and computer literacy lessons

The interface becomes friendly and intuitively clearer for users. However, a number of users go to new versions of programs not immediately or does not go through the habit, reluctance to spend money on updates, incompatibilities of new programs with computers. Accordingly, the question of compatibility of files of various word versions.

It may be interesting:

Limited functionality mode - what is it

In most cases, documents stored in a new version of the software package, in the old version, simply will not be opened. But the opposite action is carried out.

In programs Microsoft Office. And specifically in Word, users in this case are faced with a limited functionality mode.

How to remove limited functionality

There are several ways to remove incompatibility.

Enabling compatibility

In Word 2010, there is a file compatibility verification feature with the version of the program in which it is open. For this:

the "File" menu selects the "Common Access" item;
next, "Search for problems";
and "Compatibility Check".

After that, the inscription about limited mode disappears.

Important! The document expansion. DOC can be heated in the new version of Word in format.docx or other available, among which web pages, TXT text file, PDF, RTF and some others. About this below.

Transformation of the document

Another option is to convert a document by selecting the item in the menu, which is called "convert". The file will acquire a new format, i.e. Changes the extension in the new version of the program, and will provide an opportunity to format text, markup and other aspects in the design. The source file is replaced by converted, and in the old Word this document is no longer open.

Convert File

The last way to remove limited functionality mode is to use the programs or online file conversion services. The source file is loaded to the resource or the program, the desired output format is indicated, the file is converted.

This method is used when reformatting the old file in a new and vice versa, when the document from new program It is required to open in the early version. Basically, after processing, the text is displayed correctly, but there are failures in design. Charts, graphics or other objects similar to them, which in the late version were tuned and edited, in the old sometimes are displayed as pictures or not displayed at all.

Whatever the way is chosen, all of them are simple, and after performing several actions will allow you to use in the document extensive functionality of a later version of Word. If you have any questions about Microsoft products that you have not found the answer in the article ,. Together we will find the answers.

For users of old versions of Word, when opening documents, an inscription on the mode of limited functionality appears. The question arises, which means this mode of limited functionality in the Word, how to remove it. After all, it reduces the ability to edit texts, does not give access to new expansions, in general, it creates inconvenience in the work. Calling a programmer for such a simple work as a change in the format, in this case it will not be necessary, you, having studied our recommendations, quite handle the task without spending a lot of time.

What does the functionality limit mean

The Word text editor included in the Microsoft Office package is constantly updated by the developers: the features are increasing, the interface changes. This affected the expansion: WORD 2003 has Doc, and 2007/2010 - DOCX. Users sometight, get used to one program, reluctantly change it to a new one. But if you have to send or transfer files to another computer, with updated programs installed there, problems arise. It happened with Word. Files performed and saved in 2003 format are open in other read-only, without the ability to edit data. Users are reported that the mode of limited functionality is involved. Created in 2007 did not open at all at first from those who had the usual Word 2003, or some additions did not work. The developers made a utility that allowed to open documents created in Word 2007 through the 2003th. And yet the mode of limited functionality sometimes does not allow to work fully:

There is no access to the creation of new documents.
Open text can be viewed, but not edit.
You can not use advanced features, such as exports to PDF, new templates.

Mode limited word functionality 2010, how to remove - read below. Actually disable the mode - the procedure is simple, which does not require high time and some special knowledge. Read our instructions, and you can safely work with your texts.

Removal of restrictions

You have prepared the text of the house on an old one, but on such a word 2003 familiar to you. They brought a file on a flash drive or another carrier to work, to friends, and there was installed WORD 2007/2010. You need to make changes to either add-on before printing, but it is not available. So, you have a choice: apologize and suggest to do everything later when you return home, or convert the document to enjoy all the features provided by the developers.

If you chose the second option, then you need to know how to make it all to work. Here are two ways: with the preservation of the source file or without saving.

You decided to convert the document 2003 to a new format, but leave the source. You just need to recover with another extension. To do this, go to "File" - "Save As". In the "File Type" string, select " Document Word.", Enter another name. An additional window will open, where there will be a warning that the new version will not open in Office, click OK, you can first put a tick "no longer specifying this question" so that the next time this message did not appear. System Save both options with different extensions.
If you do not need to save the original option, we do this: in the "File" tab, go to the "Details", there click on "convert". You will receive a file with the DOCX extension, all new features will work without problems.

Note: In the WORD 2007 interface, instead of "File" in the upper left corner there is a "Office" button.

In Word 2013, the problem is solved similarly, the principle of work has not changed.

If you have old version Word, limited functionality mode, how to turn it off? Remove it does not require special skills. You do not have to contact the specialists, pay for their services. Each user will easily cope with it, following our recommendations.

With the Word 2007 output, Microsoft introduced a new format for text documents. This format Received an extension and became a new standard for Word text editors. Now Word 2007, 2010, 2013 and 2016 by default saves all text documents in DOCX format.

But, in use, the old versions of the Word text editor are left, in particular Word 2003, which still enjoys very popular. These old versions of Word continue to save documents in the DOC format, which creates some compatibility problems when opening data of documents in new Word versions.

For example, if in Word 2010 to open an old document in DOC format, then the Word 2010 user will not be able to use all the functions of this editor. It is about such a problem and signals the message "Limited functionality" message, which appears in the program window header.

In this article we will tell you how to solve this problem and remove the limited functionality mode in Word 2007, 2010, 2013 and 2016.

Method number 1. Transformation of the document.

If you want to remove the mode of limited functionality in the Word, the easiest way to make it use the "Conversion" function. To do this, open the "File" menu, which is in the upper left corner of the program, select the "Details" menu item and click on the "Convert" button.

After that, a pop-up window will appear with a prevention of document conversion. In order to remove the limit functionality mode, you need to confirm the conversion by pressing the "OK" button.

What is this mode?

In most cases, documents stored in a new version of the software package, in the old version, simply will not be opened. But the opposite action is carried out.

Navigating on records

Many of the users occasionally face such a problem as "limited functionality mode" in editor Word.. How to remove this restriction? In fact, everything is very simple.

Let's look at first why this happens. As a rule, such a situation occurs in Word 2007, 2010, 2013 and 2016 when opening old files with the extension ".doc". This means that modern possibilities cannot be used in this file.

You will not be able to insert the following elements (or the opportunities will be strongly limited):

formula (equation - in Word 2016);

screenshot;

diagram;

smartart graphic element;

and much more.

How to disable restriction mode

Many users seeing this inscription in the title immediately trying to go out and think that the problem is in the editor. But actually it is not. The thing is in the structure.

Changing the problem in two ways. Although in fact, in both cases, the same (change in structure and transformation into a new format) will occur. Consider them more carefully.

Saving in a new format

Open a problem document. Then click on the File menu item.

In the left menu that appears on the left, select "Save As".

Click on the "Overview" button.

Select the desired location. Then click on the drop-down list of formats.

In the list that appears, select the very first option - "Word document (* .docx)".

Then click on the "Save" button.

As a result, you will have a message that the document will be updated to the newest format. We agree with this condition.

As a result, in the header of the file, you will see that the extension has changed by C.Doc on .docx.

Transformation of the document

This result can be achieved in another way.

Click on the File menu item.

On this page click on the "Convert" button. Detailed description Functions indicated next.

As a result, a notification is notified of the update of the document to the newest format. Click on the "OK" button.

Thanks to this, the header will appear extension.docx.

Difference between two ways

As a rule, in both cases the result will be the same - you will receive a modern format document. Now he supports all the innovations that appeared in the Word editor over the past 15 years (after 2003 Word).

But the fundamental difference is that with manual healing, you will remain both options:

old, with limited functionality;
new, with the extension of DOCX, in which you can do anything.

and much more, which was not available before.

Conclusion

This article discusses how to remove the restriction by several methods. If something does not work, you may choose not the same format when saving.

Video instruction

You can watch a video in which additional comments are given to the actions described above.