Front camera does not work on iPhone 5. The iPhone camera does not work

If the camera does not work on iPhone, then the possibilities are limited full use Devices. Causes of malfunction can be different, but there are effective ways to restore the workability of the smartphone on their own.

Causes of faults

During active operation of the iPhone, unforeseen circumstances may occur, as a result of which the front or rear cameras fail. The camera does not work as a result of the impact of such factors:

It happens that front-camera It works, and when switching to the main one, a dark screen appears. This may designate some details in the phone, but sometimes the source of the problem is software failures.

Signs of failure of smartphone functions

If when you turn on the camera on the screen it is written "The flash is turned off, cooling it is required for the device," although there was no overheating, it is a clear sign of breakage. In addition, there are a number of factors indicating the inoperability of the chamber. Here is some of them:

• the camera turns on for a long time
• viden black screen
• photos blurred, incorrect color reproduction
• flashlight does not turn on
• camera when turned on freezes
• no flash
• the application disappeared

To find out the reason why blurred photos are obtained, the image is poorly focused, the camera completely stopped working, you can perform several actions yourself or use the services of professionals.

How to independently restore the full work of the smartphone?

If your phone is under warranty, it is better to contact the service center to restore functions.

To independently run the camera that hung after the update is not turned on after the fall, it reports that cooling is required, some effective techniques can be performed.

Close the application through the multitasking screen and start it again with homepage. If it did not help, then try to turn on (off) energy-saving mode in a mobile device and switch cameras with frontal to the outer while the dark screen will not disappear. You can also:

• reload the device (at the same time hold the "Home" and "Sleep" buttons until the "apple" logo appears)
• perform full reset settings
• establish a relevant firmware through dFU mode

If these actions did not solve the problem, then the cause of the malfunction is mechanical damage to the parts. Perhaps the loop or battery departed. In this case, the smartphone requires repair.

If you have knowledge and experience in restoring the functionality of the cameras, you can independently disassemble and fix the device. Otherwise, you will only aggravate the breakdown and increase the cost of repair.

To independently disassemble the iPhone housing, you need a set of special tools (miniature screwdrivers, auxiliary tweezers, plastic blade, suction cup, etc.). The disassembly of the smartphone is performed in several stages:

• rear cover is removed
• raised the screen and unscrewed from the motherboard
• the battery is disconnected
• remove the board, unscrewed mounts to the case
• checking the fastening locations with the camera

If the phone fell, the loop connecting the camera with system boardAs a result, you can see on iPhone black screen.

After breaking the phone, re-connect the camera module, check the reliability of the connections. Then collect a smartphone and test work mobile device. If the camera turned on, photographs and snapshots are normal, it means that the problem is eliminated.

When all attachments are on the spot, but a closed lens or dark background is displayed on the screen, diagnostics are needed. apple devices. Determine the exact cause of the malfunction will be able to a qualified master.

Advantages of professional help specialists

In the wizard service centers, Apple devices of all models are repaired. From what specialist you consult help depends on the duration, price and quality of repair. If the camera does not work on the iPhone, qualified specialists perform such actions:

• diagnosis of smartphone
• assessing the performance of all functions, if necessary, their configuration
• replace damaged parts (glasses, flashes, loops, etc.) on the original
• cleaning the housing of the smartphone from dust, glass lens from stains and divorces
• check the functionality of the chamber after repair

To identify the cause of the fault, the masters use professional equipment and special tools. They know how to effectively replace the necessary details.

"Why doesn't camera work on iPhone?" - The question is interesting, especially considering the proprietary quality of all components from Apple. The company itself is a manufacturer on tons of messages with complaints that appeared after IOS output 9.1.x, is equally responsible: you have covered the camera, everything is in order with the firmware.
When the number of complaints approached the number of people in a small town, the wizard from different services began to find out why the camera does not work on 5S iPhone and other models. Of course, some of their conclusions are simply speculation, but what they found out makes thinking.

If you are ready to spend time on independent fix and save money - read further, but note: all the tips are advisory and are not instructions.

Causes of breakdown

There were several main reasons for which the camera was stopped working on the iPhone 5S (this model was a "experimental rabbit"):

1. Error in the new updateiOS.. It originated after trying to reduce the power consumption of the camera and flash during the shooting process.
2. Hardware crash, withdrawing chamber. It would seem that the camera does not work in the iPhone 5, the black screen with the inscription "Flash is turned off. Before using the iPhone flash, cooling is required. "Specifies the flash breakdown, so it is logical to turn off at all. Unfortunately, the camera with an outbreak is a single node, and therefore they cannot be taken separately, which means there is an error in the equipment.
3. Installed non-original camera. By buying a phone from hands, be prepared for similar unpleasant surprises: Apple is extremely negative about the components installed without their knowledge, and therefore have the full right to write firmware only under the original components. Why the camera does not work on iPhone 5 you can ask previous owner, because it may be far from the first time.
4. Deputy Clay. With drops, blows and other mechanical effects, the loops can break, disconnect or partially damage, so the front camera does not work on the iPhone 5 very rarely, because its cable is more reliable (which you can not say about the rear).
5. Water fell. Up to 6-7 versions, all the iPhone is afraid of water, so even on time the dried apparatus can overrevind or lose parts of the functions. Believe me if the camera does not work on the iPhone, the black screen from which is shown in the working system, then you are still very lucky.

Whatever the reason for the breakdown specifically in your apparatus, the algorithm of actions is the same on all models. Note: You need to act neat and confident, so if you doubt your abilities - better contact the official service center.

The camera does not work on 5S iPhone: how to fix

The whole process of independent correction of this problem can be divided into several stages that differ in difficulty.

Magic in iOS.

At this stage you have to do action that users can help, but are not explained logically.

1. Delete all applications that can use the chamber (except standard).
2. Turn on or turn off the power saving mode, depending on which state it is at the time of breakage.
3. Switch the cameras before the picture appears. When the camera does not work on the iPhone 5S with one of the sides, the other must be in working condition.

This step requires some knowledge in the appenderance area of \u200b\u200bthe iPhone. Apple official representatives give the following problems to eliminate the problem:

1. Make a hard reboot with POWER + HOME buttons by climbing 7-8 seconds.
2. Reset all settings and content.

If, after that, the camera does not work on iPhone, then restore the previous or current firmware through the DFU mode. On this useful advice From EPL erections. With original devices, it helps almost always, but the repair apparatus "cure" is more complicated.

Service Center

If after manipulations still does not work the rear camera of the iPhone 5S, then the output suggests itself: you need to disassemble an iPhone and study its insides. It is not recommended to do this on its own.

IPhone 5 camera does not work - remove the problem yourself

The rear camera breakage on the iPhone 5 may be a consequence mechanical damage or the result of a third-party job software. Consider more detailed all the common causes of breakage, as well as methods of its correction.

Causes of breakdown

If after starting standard application "Camera" lens does not show anything (iPhone 5 camera black screen), check if the case or other external objects are covered with a camera. The most common causes of malfunction are:

• update firmware. Often, after updating the version of the installed OS, users can face incompatibility of the software and hardware components of the camera. Because of this, the camera does not work in the iPhone 5;
• too little random access memory devices, which is why the program cannot progress;
• the main directory of the camera is filled;
• hit in the housing of moisture;
• strong drop or punch of the phone that can trigger the camera module breakdown.

Method 1. Emergency reboot

This method will help to eliminate the problem of the non-working chamber, if at the moment there is not enough RAM on the phone or after the update standard program "Camera" lens stopped working.

Hold down the power key and hold the TE for 10 seconds.

Wait for the device shutdown menu. Slide the slider to the right to turn off the iPhone 5. Then start the phone again. Check the camera performance.

Method 2. Delete the Camera Catalog

Often the camera on iPhone 5 does not work when the root folder with all the photos is filled. Connect the phone to the computer and delete the directory that saves all the videos and photos. It is located at PRIVATE / VAR / Mobile / Media / DCIM / Apple.

Method 3. Restore device settings

To eliminate all existing software problems, including the problem of the camera functioning, it is better to make the phone recovery through iTunes. Connect the phone to the computer on which it is installed iTunes application. The program will automatically detect your phone. After a few seconds a window opens containing information about iPhone. Click on the Restore button and wait for the formatting process.

Important! After recovery, absolutely all data will be removed from your smartphone. All settings will be returned to factory.

Method 4. Replacing the camera module

Most effective method - This is the replacement of the camera module. To start disconnect the phone. Using a screwdriver, remove two screws from the bottom of the housing.

With the help of a suction cup, disconnect the back cover and the bottom edge of the shovel. Position the lid by 90 degrees from the phone without disconnecting it to the end.

Using a screwdriver, remove the protective panel from the motherboard, as shown in the figure.

The spatula gently disconnect the front chamber loops, the ADC and the LCD display of the phone.

Unscrew the screws shown in the photo:

Remove the battery connector holder.

The location of the connector must be pushed. Then you will find the battery itself and disconnect it. Raise the cable of the antenna module.

Remove the protective panel that holds the top of the motherboard. Using a screwdriver, release these loops:

Remove the screws at the top of the case:

Unscrew the screw and remove the central holder of the main board:

Remove the sim card from the phone. Fully disconnect motherboard And get it out. From the reverse side of the motherboard, disconnect the Wi-Fi loop. Discover the camera and replace it with a new part. Repeat all the actions in the reverse order to collect the phone.

In recent years, our world has changed dramatically. There were many new things that were strongly affected. One of these events is the appearance of the iPhone (iPhone). He became a revolution in the world of smartphones and is an innovation to this day.

the iPhone is a full mini-computer that copes with almost any task. One of the most popular features of the smartphone that users use are photographing.

Agree, earlier the number of photos taken by us were negligible. Today we are increasingly using the iPhone than the camera. According to Internet publications, the iPhone camera is considered the most popular in the world. And first of all, for the reason that it is convenient to work with it. It is enough just to get the gadget, run the camera from the unlock screen - and the smartphone can take pictures. Moreover, the quality of the photo is striking.

Like many other smartphones, it can also fail. And one of the most common problems is that the front camera of the iPhone (iPhone) does not work. With such a problem, the owners, not knowing what to do, immediately go to the service center. But it happens that it is possible to return the normal operation of the anterior chamber on their own.

In general, the reasons for which the anterior camera comes out in the iPhone may be a lot. Although usually all of them are reduced to moisture ingress or mechanical damage.

So why the front camera of the iPhone does not work (iPhone)

You need to start with the launch of the "Camera" application. If the program does not work and there are faults, then when starting the system, the system will give an error or a black screen. From now on, you need to look for the cause of the wrong work.

• Remember whether your smartphone has fallen. If it worked well before the fall, then the reason becomes clear.
• Next you need to understand where it fell. It could be a solid ceramic tile, a soft sofa or wet grass. Or maybe you dropped it in a restroom or bath?
• If the front camera ceased to work as a result of falling into the water, then it is necessary to contact our Apple-Sapphire service center as quickly as possible, otherwise it can lead to deposits.
• If the smartphone did not fall, the moisture did not penetrate it, you did not hit it, then the reason is likely to software failure. The camera can stop working as a result of unsuccessful flashing, updates or jailbreak.

What if the front camera iPhone does not work (iPhone)

1. Mechanical damage.

If your smartphone is damaged by mechanical path, then to correct the damage cameras will have to disassemble the device. After you figure it out, it is necessary to carefully study the place of attachment of the chamber and the loops. This needs to be done to check the cause of the breakdown. Due to the fall, the loop, which connects the microphone and the camera with the motherboard, can move away. As a result, the microphone and the chamber will not flow.

The camera module must be reconnected, after which collect devices. Turn on and check it out. In the event that no one is doing anything, it means that the problem is in the module. The user will have to be completely replaced completely because it is not collapsible.

If you do not have time to do this or confidence in your abilities, it is better to take a smartphone into our specialized workshop Apple-Sapphire. Our employees will repaired your "apple" device, very soon he will again delight you with high-quality pictures.

1. Moisture hit.

Also, the front camera can stop working when moisture falls into the phone, which most often penetrates through the microphone hole. Repair methods are unchanged here: disassemble the device and replace the camera module.

1. Software errors.

Among the number of program errors it is worth highlighting problems with the firmware. This may occur if the flashing or update has been failed. Also, errors can give the jailbreak installed on the smartphone.

But these are only isolated cases. In fact, this happens extremely rarely. Such problems happen if you update the gadget to the beta version of the firmware, and there are many bugs in it. However, everything can be fixed by performing the smartphone firmware.

We do not recommend trusting our iPhone to dubious craftsmen, as for the repair of this modern technology, special equipment will be required and the corresponding knowledge. Therefore, if the front camera does not work on the iPhone, contact our Apple-Sapphire company, where your smartphone will get into the hands of professionals.