Acer Iconia Tab A211 tablet firmware. Just in case we make a full backup tablet

Before you detailed step-by-step instruction about how to flash tablet Acer iconia Tab A211. Our editors selected the most suitable way to firmware this Acer model. If a this instruction Result will not give Try to flash another method: TWRP Recovery, Rom Manager, FastBoot or Classic OTA.

A warning! After the device firmware, all your data with internal memory - Will erased, so to save your contacts, settings and applications, first save all data from the tablet.

Installation of the system method CWM Recovery. 1. Charge the styled tablet at least 80%. 2. We save from the flash drive, the sim cards and the memory of the tablet all the data that cannot be lost. Simka (if any) can be pulled out. 3. We place the necessary firmware in the memory of the tablet. The firmware file must have an archive format zip.. You can choose and download the firmware. 4. On all Acer tablets there are recovery from the manufacturer, so we change it to ClockworkMod recovery. We do this on such instructions: Install the application from Google Play on the tablet. Take it and provide ROOT rights. If the Rutign is not on the tablet, we get them.

In the Options list, select "CWM Recovery".

Then the application will show a list of available recovery. In the example, Rashr showed 2 options: ClockworkMod with support for the press on the screen and the classic option (control is performed by the volume and power button).

A download request will appear. Click "Yes".

Then the CWM Recovery image is started for the tablet.

A notification will appear that the firmware has been successful and now you have installed modified recovery. Immediately go to it, for this click "YES".

Ready. If you have already been installed clockworkmod recovery, then just enter it by clamping for 3-5 seconds any of the combinations: - Volume Up + Power Button - Volume Down + Power Button - Volume Up / Down + Enable Button + "Home" - Volume up + volume down + power button 5. The movement in the recovery menu is carried out using the volume buttons, and confirm the selection of the power button. Before installing the firmware, you must first make a reset of the settings. Therefore, in the menu, select item. wIPE DATA / factory Reset. .

6. Next, just confirm that you agree to make a reset: YES - WIPE ALL USER DATA.

7. Now in the main recovery menu, select install Zip..

8. After that, select Choose Zip From / Sdcard.

9. Go to the folder in which you saved zip file. Firmware and select it.

10. A request for confirmation of action will appear. Choose YES - Install ....

11. The firmware installation process will begin and the inscription will appear at the end Install from SDCard Complete. The firmware is completed. Return to the main menu CWM Recovery and reboot the tablet. To do this, choose reboot System Now..

12. Ready. Loading the tablet from the already installed firmware. Other materials

Install Optional Products - DriverDoc (Solvusoft) | | | |

This page contains information about installing the latest loaders of Acer Iconia Tab A211 drivers using the Acer Drivers Update Tool.

Acer Iconia Tab A211 drivers are small programs that allow the equipment of the tablet to interact with software operating system. Permanent update Software Acer Iconia Tab A211 prevents failures and maximizes the performance of the equipment and system. Using outdated or damaged Acer ICONIA TAB A211 drivers can lead to system errors, failures and equipment failures or computer. It is ill to install the incorrect Acer drivers can make these problems more serious.

Tip: If you do not know how to update the Acer devices manually drivers, we recommend downloading the Acer Iconia Tab A211 service program for Drivers. This tool will automatically download and update right versions Drivers Acer Iconia Tab A211, protecting you from installing incorrect Iconia Tab A211 drivers.

About the author: Jay Geater is president and cEO Solvusoft Corporation is a global company engaged in software and focus on innovative service programs. He all his life passionately was fond of computers and loves everything connected with computers, software and new technologies.

Preparation

We do everything under Windows / Linux-Ohm.

We connect the tablet with the USB debug mode, then from the command line.

BOOTLOADER UNLOCK (unlock the bootloader)

aDB Reboot-Bootloader

fastBoot OEM Unlock.

Recovery Flash Shem Kiwi ++ Recovery

I swing the recovery http://www.kiwittsoft.de/en/acer-a210-a211/kiwirecovery/ and unpack

unzip kiwi.recovery.zip.

aDB Reboot-Bootloader

fastBoot Flash Recovery Kiwi ++ Recovery.img

Kiwi recovery leaks so there should be no problems with navigation.

How to enter Kiwi ++ recovery

"On the tablet, hold the volume with two points + power, after the first vibrating signal release the power and continue to hold 2 points, after the second vibrating signal, release two points and immediately press the volume with one point and hold until notification on the screen appears on the screen - Recovery Mode."

We sew Cyanogenmod

First of all, we make the bakap of the entire tablet (the so-called Nandroid) on the SD card, I was useful :-)

Swing the firmware for your animal http://www.kiwittsoft.de/en/acer-a210-a211/cyanogenmod-11/ and put on the SD card.

Swing Gapps-s (Google Apps) http://wiki.cyanogenmod.org/w/google_apps and also put on the SD card.

We go into the recovery and sew the firmware, then make Wipe Data and sew Gapps-s.

We reboot, we wait until the animal warms the first time (I took about 5 minutes) and enjoy.

How to update

I decided to update the software well and at the same time the loader, previous version It was 4.4.2 and 1.3.1, respectively.

We update the bootloader to Kiwi ++ 1.3.3

We update CyanogenMod (Android 4.4.4)

Just in case we make a full backup tablet.

How to flash Acer?

Every day, tablet devices begin to replace personal computers And laptops. The advantages of such devices are mobility and usability.

Many tablet users have Acer production models and are sometimes wondering how to flash ACER independently.

Installation of firmware

To put new firmware on the Acer tablet, you must first get right to access root application (Unless of course, previously your tablet did not receive these rights). Then install ClockWorkMod Recovery and download the firmware itself.
To get root rights, download the Gingerbreak version.
- Then, in the Device menu, install the "Unknown sources" option, and in the "Application" menu - "Development" click on the "USB Debug" key.
- After that, install the application Gingerbreak-v1.20.apk. By installing the applications, run it and click "Root Device".
Then we proceed to download the Acer Recovery Installer application, after starting the application, we launch the ClockWorkMod Recovery option and wait for the installation.
Go directly to the firmware of the device.
Naturally, first, you start downloading the file of the desired firmware into memory or on the device's memory card. Be sure to make sure (if it is an archive file), that it does not have errors by unzipping it on the PC.
The next item is to download the file to CLOCKWORKMOD with the simultaneous switching on the power button and the volume change keys. The keys must be held before the menu will not be detected in the corner of the screen. In the menu that appears, mark "WIPE DATA / Factory Reset". To move on the menu items, use the volume key, and to make the selection Use the Enable key. In this menu, we select "Wipe Cache Partition" and, therefore, go to "Advanced" and then click "Wipe Dalvik Cache" and "Wipe Battery Status". After that, we return to the point "Go Back".
Now proceed to the "Install Zip From SD Card" by selecting the downloaded firmware file. Confirm the selection of the file installation, we carry out the power key.
Once the installation is completed, the inscription Install Zip from SD Card Complete will appear, you will need to return to the menu and reboot the tablet using the available "Reboot System Now" item.

About the firmware android devices read in the article