Download the firmware for Androyd Huaway G610 U20. Getting Root Huawei G610

Firmware phone Huawei. G610-U20.

One of the most successful solutions when buying an Android smartphone in the middle level in 2013-2014 was the choice of the Huawei G610-U20 model. This is really an equilibrium device due to the properties of the hardware component used and the assembly until now serves its owners. The article will deal with how to perform the firmware of the Huawei G610-U20, which will allow you to almost inhale the second life into the accessory.

Reinstalling the HUAWEI G610-U20 software usually does not cause difficulties even at novice users. It is only important to make the phone and the software instruments needed in the process, it is also correct to make annotations.

All responsibility for the results of manipulations with the software part of the phone lies only on the user! The resource administration for the likely bad consequences of the implementation of the following instructions is not responsible.

Preparation

As already noted above, the right preparing for specific manipulations with the phone's memory almost everything intends to the success of the entire process. As for the model under consideration, it is fundamentally fulfilled by all of the following steps.

Step 1: Install Driver

In fact, in all methods of installing software, and the restoration of the Huawei G610-U20 is used by PC. The ability to pair the device and computer occurs after installing the drivers.

How to install drivers for Android devices, is carefully talked in the article:

For the model under consideration, the most common method of the driver installation is the implementation of the built-in virtual CD apparatus on which the installation package is located. Handset windriver.exe..

Run the auto install and follow the instructions of the application.

In addition, a good option is to use the proprietary utility to work with the device - Huawei Hisuite.

We establish the software by connecting the device to the PC, and the drivers will be automatically installed.

In the event that Huawei G610-U20 is not loaded or the above-described methods for installing drivers are not applicable for other reasons, you can use the driver package available on the link:

Step 2: Getting Ruttle Ruth

In general, for the firmware of the superuser's right, the superuser's right is not needed. The need for such appears when installing various modified software components. In addition, the root is needed to create a full-fledged backup, and in the model under consideration this action is extremely preferably carried out in advance. The procedure will not cause difficulties when applying one of simple tools On the choice of user - Framaroot or Kingo Root. Select the appropriate option and perform steps instructions for receiving the root from articles:

Step 3: Data Backup

As in any other case, the Huawei Ascend G610 firmware involves manipulations with the sections of the device's memory, including their formatting. In addition, during operations, various failures and other problems are possible. In order not to lose personal information, as well as maintain the ability to restore the smartphone to the original state, you need to make a backup system, following one of the instructions of the article:

It is worth noting that a good solution for creating backup copies of user data and subsequent recovery is the branded utility for smartphone Huawei. Hisuite. To copy information from the device in the PC applies tab "Reserve" In the main program window.

Step 4: NVRAM Bacup

One of the most important moments Before serious actions with the sections of the device's memory, which is recommended to pay special attention is the NVRAM backup. Manipulation with G610-U20 quite often lead to damage to this section, and restoration without saved backup Difficult.

We get root rights in one of the ways described above.

Download and install the TERMINAL EMULATOR FOR ANDROID from the playing market.

We open the terminal and enter the SU command providing the root-right program.

Enter the following command:

dd if \u003d / dev / nvram of \u003d / sdcard / nvram.img bs \u003d 5242880 count \u003d 1

Press "ENTER" On the on-screen keyboard.

After executing the file described above nvram.img Saved at the root of the internal memory of the phone. Copy it in a safe place, in any case, - on hDD PC.

Firmware Huawei G610-U20

Like many other devices operating under android managementThe model under consideration can be stitched different ways. The choice of the method depends on the goals set, the state of the device, as well as the level of user competencies in working with device memory sections. The following instructions are arranged in order "from simple to complex", and the results obtained after their fulfillment can satisfy the needs, including the demanding owners of the G610-U20.

Method 1: DLOAD

Most. simple way Reinstall and / or updates of the G610-U20 smartphone software, as, however, and many other Huawei models are the use of the mode "DLOAD". Among users, this method was called "Three buttons". After reading the following instructions, the origin of this name will be clear.

We download the necessary package with software. Unfortunately, on the official website of the manufacturer to find firmware / updates for the G610-U20 will not be possible.

Therefore, we use the link below, after the transition to which you can download one of the two installation packages, including the last official version B126.

We place the resulting file Update.app in the folder "DLOAD"located at the root of MicroSD cards. If the folder is missing, it must be created. The memory card used in manipulation must be formatted in file System FAT32 is an important factor.

Turn off the device fully. To make sure the shutdown process is completed, you can pull out and paste back rechargeable battery.

Install MicroSD with firmware in the device, if not installed earlier. Click all three hardware buttons on your smartphone at the same time for 3-5 seconds.

After vibration key "Food" We release, and the volume buttons continue to hold until the image of the android appears. The reinstalling / update procedure will start automatically.

We wait for the completion of the process, accompanied by filling out the execution indicator.

After installing the software, reboot your smartphone and delete the folder "DLOAD" C memory cards. You can use the updated version of Android.

Huawei Ascend G610-U20 Firmware

Huawei G610-U20 firmware

huawei.-ascend- g610—u20.-mtk-6589-vietnam.html.

Method 2: Engineering Mode

Method for starting the HUAWEI G610-U20 smartphone software update procedure engineering menu In general, it is very similar to the above-described method of working with firmware "through three buttons".

We perform steps 1-2, how to update via dload. That is, load the file Update.app and move it to the root of the memory card to the folder "DLOAD".
MicroSD with the required package must be installed in the device. We go to the engineering menu, typing in the dialer command: margin: 0 10px 5px 0; " SRC \u003d "C: \\ Users \\ Oleg \\ Desktop \\ 2 \\ images \\ ProShivkasmartfonahuaweig610u20_224c938c.png" /\u003e

After opening the menu, select the item SD Card Upgrade.

I confirm the beginning of the procedure tap on the button "COMFIRM" In the query window.

After pressing the button described above, the smartphone will restart and the installation of the software will begin.

Upon completion of the update procedure, the device will automatically boot into the updated android.

Method 3: SP Flashtool

Huawei G610-U20 is built on the basis of the MTK processor, which means that the firmware procedure is available through special application SP Flashtool. In general, the process is standard, but there are certain nuances for the model we are considered. The device has been released for a long time, so it is necessary to use not the latest version of the application with SECBoot support - v3.1320.0.174.. The desired package is available for download by reference:

It is important to note that the firmware via SP Flashtool according to the instructions below is in an effective way Recovery is inoperable in the program part of the Huawei G610 smartphone.

It is extremely recommended to use on versions below B116! This can lead to the inoperability of the smartphone screen after the firmware! If still installed old version And the device does not work, simply flash Android from B116 and above according to the instructions.

Download and unpack a package with the program. The name of the folder containing the SP Flashtool files should not contain Russian letters and spaces.

We download and install the drivers in any available way. To check the correctness of the driver installation, you need to connect the shut off smartphone to the PC when open "Device Manager". For a short time, the item should appear in the list of devices. "MediaTek Preloader USB VCOM (Android)".

Download the need Official firmware For SP FT. Multiple versions are available for download.

Unpack the received package to the folder whose name does not contain spaces and Russian letters.

Turn off your smartphone and remove the battery. We connect the machine without battery to the USB port of the computer.

Run Sp. Flash Toolby clicking twice the file Flash_Tool.exe.Located in the folder with the application.

First write the section "SEC_RO". Add a scatter file to the application containing a description of this section. To do this, use a button. Required file. Located in the folder "REWORK-SECRO", in the directory with a unpacked firmware.

Press the button "DOWNLOAD" and confirm the consent to the start of the recording process of a separate section by pressing the button "Yes" in the window "Download Warning".

After the progressbar is displayed «0%» , insert the battery to the USB device connected via USB.

The process of recording the section will begin "SEC_RO",

upon completion of which the window appears "Download OK"containing a green circle image. The whole process passes almost instantly.

The message confirming the success of the procedure must be closed. Then turn off the USB device, remove the battery and connect the YUSB cable to the smartphone again.

We download the data to the remaining G610-U20 memory partitions. Add a scatter file located in the main folder with the firmware - MT6589_Android_scatter_emmc.txt.

As you can see, as a result of the previous step in the partitions field and paths, the SP Flash Tool applies checkboxes in all check boxes. We are convinced of this and press the button "DOWNLOAD".

Waiting for the end of the verification process control sumsaccompanied by repeated progressbar filling with purple color.

After the appearance of the value «0%» In the progressbar insert the battery to the smartphone connected to the USB.

The process of transferring information to the device memory is accompanied by filling out the execution indicator.

Upon completion of all manipulations, a window appears again. "Download OK"confirming the success of operations.

Disconnect uSB cable from the device and launch it with a long press key "Food". The first launch after the above operations is quite long.

Method 4: Custom firmware

All of the above methods of firmware G610-U20 as a result of its execution provide the user with the official software from the manufacturer. Unfortunately, the time passed since the removal of the model from production is too large - official updates Software G610-U20 Huawei does not plan. The latest released version is B126, which is based on the outdated Android 4.2.1.

It should be stated, the position with the official software In the case of the apparatus under consideration, it does not instill optimism. But there is a way out. And this is the installation of custom firmware. This solution Allows you to get on the device relative to Fresh Android 4.4.4 and a new environment for executing applications from Google - ART.

The popularity of Huawei G610-U20 led to the appearance of a huge number of customers for the device, as well as various ports from other devices.

All modified firmware are set by one method - the installation of a ZIP packet containing software through a custom recovery environment. Details about the procedure for firmware components through a modified recovery can be found from articles:

The example described below uses one of the most stable solutions among customs for the G610 - AOSP, as well as TWRP Recovery as a setup tool. Unfortunately, on the official website of the TeamWin version of the medium for the device under consideration is missing, but there are useful options ported from other smartphones of this recovery. Installing such a recovery environment is also somewhat non-standard.

We establish a modified recovery. For G610, the installation of the environment is made via SP FlashTool. Instructions for installing additional components through the application are set out in the article:

The second method, with which you can easily install custom recovery without a PC, is the use of android application MobileUncle MTK Tools. We use this wonderful tool. Download last version The links on the link above and install as any other APK file.

We place the file image of the recovery in the root of the memory card installed in the device.

Run MobileUncle Tools. We provide a superuser program.

Select item "Recovery Update". The screen opens, at the top of which the file image is automatically added from the recovery, copied to the root of the memory card. Click to the name of the file.

Confirm the installation by pressing the button Ok.

Upon completion of the MobileUuncle procedure, it proposes to reboot immediately into the recovery. Press the button "Cancel".

If file zip. With custom firmware, it was not copied to a memory card in advance, carry it there before rebooting on the recovery environment.

Reboot to the recovery through MobileUncle by selecting the Main Menu application. And confirm the reboot by pressing the button Ok.

We flash the zip-package with software. Details of the manipulation are described in the article on the link above, we will dwell here only at some points. The first and mandatory step after loading in TWRP when switching to custom firmware is cleaning sections "DATA", "Cache", "Dalvik".

Install the caste through the menu "Installation" On the main screen TWRP.

Install Gapps if the firmware does not contain google services. You can download the desired package containing Google applications by reference above or from the official project site:

On the official website of the project, we choose the architecture - "ARM", Android version - "4.4". And also determine the composition of the package, after which we press the button "Download" With the image of the arrow.

Upon completion of all manipulations, you need to restart the smartphone. And here at this final step, we are not waiting for a very pleasant feature of the device. Reload from TWRP in Android by selecting the item will not work. Smartphone just turns off and run it by pressing a button "Food" will not work.

The way out of the situation is quite simple. After all manipulations in TWRP, we complete work with the recovery environment by the choice of items - "Turning off". Then remove the battery and insert it again. Run Huawei G610-U20 by pressing a button "Food". The first launch is quite long.

Thus, applying the above methods of working with the sections of the smartphone, each user becomes available to fully update. software Apparatus and recover if necessary.

Smartphone Huawei G610. It is estimated in 3 points on the productivity scale and is running Android 4.2 OS. This smartphone is quite productive. Find out the characteristics of getting the root and make a reset settings. By the way, we can download firmware and instructions on your Huaway. On board has - MediaTek MT6589, 1200 MHz.

Characteristics

Standard: GSM 900/1800/1900, 3G
Type: Smartphone
Operating system: Android 4.2
Case type: Classic
Case material: plastic
Number of SIM-Cards: 2
Mode of operation of several SIM cards: alternated
Weight: 170 g
Sizes (shXVXT): 73.6x142x9.9 mm
Screen Type: Color IPS, Touch
A type touchscreen: Multitach, Capacitive
Diagonal: 5 inches.
Image Size: 540x960
Automatic screen rotation: yes
Type of melodies: polyphonic, MP3 melodies
Vibrating alert: Yes
Camera: 5 million pix., 2560x1920, LED flash
Camera Functions: Autofocus
Video recording: yes
Max. Video Resolution: 1280x720
Geo Tagging: yes
Front camera: yes, 0.3 million pixes.
Audio: MP3, WAV, FM Radio
Dictaphone: Yes
Headphone jack: 3.5 mm
Interfaces: USB, Wi-Fi, Wi-Fi Direct, Bluetooth 4.0
Satellite navigation: GPS
A-GPS System: Yes
Internet Access: WAP, GPRS, EDGE, HSDPA, HSUPA, HSPA +, Email Pop / SMTP, Email IMAP4, HTML
DLNA support: yes
Processor: MediaTek MT6589, 1200 MHz
Number of processor cores: 4
Video processor: PowerVR SGX544
Volume of built-in memory: 4 GB
Volume random access memory: 1 GB
Memory Card Support: MicroSD (Transflash), up to 32 GB
Additional SMS functions: Text Entering with a dictionary
MMS: Yes
Battery capacity: 2150 mAh
A2DP profile: yes
Sensors: illumination, approximation
Search book: yes
Exchange between the SIM card and internal memory: there is
Organizer: Alarm Clock, Calculator, Task Scheduler
Complete set: phone, battery, headphones, charger, USB cable, manual

Firmware for Huawei G610

Official android firmware 4.2 [- Stock ROM file] -
Custom firmware Huawei -

Firmware for Huawei G610 You can find in the branch In addition, you pre-download the necessary software for flashing

What information do you need to know for flashing?

Brand / Model [Desirable] - Huawei / G610
Processor - MediaTek MT6589, 1200 MHz
LCD DRIVER (version)
Kernel (version) [Preferably]

Before flashing and in the process of selecting the firmware, specify the basic TX ( specifications) Through the program

What are the Castom Firmware (Firmware)?

CM - Cyanogenmod.
Lineageos.
Paranoid Android
Omnirom
Temasek's.

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK (Mokee)
Flymeos.
Bliss.
crdroid
Illusion Roms.
Pacman ROM.

Problems and disadvantages of the smartphone from Huawei and how to fix them?

If the G610 does not turn on, for example, you see white screen, hanging on the screensaver or only flashes alert indicator (perhaps after charging).
If it is hung when updating / hung on when you turn on (you need a flashing, 100%)
Not charging (usually, problems with iron)
Does not see the SIM card (SIM)
Camera does not work (for greater extent, hardware problems)
Sensor does not work (depends on the situation)

For all these issues, please contact (you just need to create a topic), the specialists will help free.

Hard Reset for Huawei G610

Instruction how to make Hard Reset. on Huawei G610 (resetting settings). We recommend to get acquainted with the visual guide, which is called on Android. .

Codes for resetting settings (open the dialer and enter them).

*2767*3855#
*#*#7780#*#*
*#*#7378423#*#*

Hard Reset via Recovery

Turn off the device-\u003e Go to Recovery
"WIPE DATA / FACTORY RESET"
"Yes - Delete All User Data" -\u003e "Reboot System"

How to go to Recovery?

hold and hold the Vol (-) [volume down], or VOL (+) [Volume Up] and the power button (POWER)
the menu will appear with Android. Everything, you in Recovery!

Reset settings on Huawei G610 can be done in a completely simple way:

Settings-\u003e Recovery and Reset
Reset settings (at the bottom)

How to reset the graphic key

How to lose graphic keyIf you forgot it, and now you can not unlock your Huawei smartphone. On the G610 model, the key or PIN code can be removed in several ways. You can remove the lock and via resetting the settings, the blocking code will be deleted and disabled.

Reset graph. Locks -
Password reset -

And article receipt Root Huawei. G610 will help you!

What is root?

For those who only became a newcomer or is not an expert in the huge world of Android and is not particularly familiar with the concept of how - Root Android and also why it is needed what can be done after receiving Root right Or, as consequently, to get rid of them if they are no longer needed, all this can be found from the detailed article -!

Primarily!

In this article there is no "left" links or not necessary actions! If you really need root rights, then read carefully and take step by step, this is a guarantee that you will do everything right! This article on obtaining root rights is divided into two parts: the first part is Required components and conditions, the second part is Instruction How to get root rights with files and programs. If in the process of getting root android rights Constantly reboots or in the eternal load process (it happens extremely rare, but still), it is worth it. Now let's get to get root rights!

Android manufacturers sometimes produce new firmwarewhere it is impossible to get root one of the proposed ways if the article still has alternative methods, try them. Can't anyway? Specify android version And the firmware version in the comments (you should not write evil shoves, that you do not put anything or others). Hang android (not loaded), read and reread from the very first paragraph, all the necessary links are present in the article!

Have questions?

Have questions left or can not get root rights to your Android? Leave comments that you have it happened or did not work out, or you did otherwise.

Necessary to get root rights

Preliminary(for method 1 and 2)

1. Computer or laptop (OS Windows)

2. intact microUSB cable

3. Charge Huawei G610 smartphone should be no less than 30%

For method number 2.

a) download the program for getting Root rights - VROOT.

For method number 3.

a) download the latest version of the application Framaroot.

Instruction ROOT HUAWEI G610

Method No. 1.

1. Archive with the program unzip

2. Run the program Eroot.

3. Connect the smartphone Huawei G610

4. Wait until Eroot. Detevis will detect

5. Press the green root button

6. Wait until Root Rights

Fashion No. 2.
1. Connect the smartphone to PC

2. Run the program to get root rights VROOT.

3. Wait until the program detects your smartphone Huawei G610

4. Press the green "root" button

7. After a couple of minutes, Root rights received

8 To provide an application rootpop-up button right button

9. If chinese characters You do not like it, it is worth thinking to replace the application Kingroot.on the SuperSu.

Replacing the Chinese Root Administrator Program Rights on SuperSU

1. Install from Google Apps Play app SuperSu.

2. Install from the Google Play application store ES file manager

3. Configure and provide Es root rights

5. Go to ES Manager on the Way / DATA / App

6. Rename the file. eU.CHAINFIRE.SUPERSU.APK -\u003e SuperUser.apk (register of letters is important)

7. Move the SuperUser.akp file in / System / Appagree to replace

8. Android reboot

9. Run the SuperSU application

10. And you agree to update binary file. SU.

5. Restart Android!

Fashion number 3.

1. Start the Framaroot application

2. Select Supersu from the proposed selection

3. Choose and click on any proposed character - Sam, Frodo, Legolas, Aragorn, Gandalf

4. Wait for the warning about successful ROOT Rights

5. Reload the smartphone

6. After downloading, find the SuperSU application in the menu, if you have ROOT rights received and you did everything right.

One of the most successful solutions when buying an Android smartphone in the middle level in 2013-2014 was the choice of the Huawei G610-U20 model. This is a truly balanced device due to the quality of the hardware components used and the assembly still serves its owners. The article will deal with how to carry out the firmware of the Huawei G610-U20, which will literally breathe the second life in the device.

Reinstalling the HUAWEI G610-U20 software usually does not cause difficulties even at novice users. It is important only to properly prepare the smartphone and the software instruments necessary in the process, as well as clearly execute instructions.

All responsibility for the results of manipulations with the software part of the smartphone lies only on the user! The resource administration for the possible negative consequences of the implementation of the following instructions is not responsible.

As mentioned above, the correct preparation of the immediate manipulation with the memory of the smartphone largely predetermines the success of the entire process. As for the model under consideration, it is important to fulfill all the following steps.

Step 1: Install Driver

In almost all methods of installing software, as well as when restoring Huawei G610-U20, a PC is used. The ability to pair the device and computer appears after the installation of the drivers.

About how to install drivers for Android devices, described in detail in the article:

Step 2: Getting Ruttle Ruth

In general, for the firmware of the superuser's right, the superuser's right is not needed. The need for such appears when installing various modified software components. In addition, the root is needed to create a full-fledged backup, and in the model under consideration this action is extremely preferably carried out in advance. The procedure will not cause difficulties when applying one of the simple tools to select the user - or. Select the appropriate option and perform steps instructions for receiving the root from articles:

Step 3: Data Backup

It is worth noting that a good solution for creating backup copies of user data and subsequent recovery is the branded utility for the Huawei Hisuite smartphone. To copy information from the device in the PC applies tab "Reserve" In the main program window.

Step 4: NVRAM Bacup

One of the most important points before serious actions with the sections of the device's memory, to which it is recommended to pay special attention is NVRAM backup. Manipulations with the G610-U20 quite often lead to damage to this section, and recovery without a saved backup is difficult.

We perform the following.

Firmware Huawei G610-U20

Like many other devices operating under the control of Android, the model under consideration can be flashed in various ways. The choice of the method depends on the goals set, the state of the device, as well as the level of user competencies in working with device memory sections. The following instructions are arranged in order "from simple to complex", and the results obtained after their fulfillment can satisfy the needs, including the demanding owners of the G610-U20.

Method 1: DLOAD

The easiest way to reinstall and / or update the G610-U20 smartphone software, as, however, and many other Huawei models are the use of the mode "DLOAD". Among users, this method was called "Three buttons". After reading the following instructions, the origin of this name will be clear.

Method 2: Engineering Mode

The method of running the Huawei G610-U20 smartphone software update procedure from the engineering menu as a whole is very similar to the above-described method of working with update firmware "through three buttons".

Method 3: SP Flashtool

Huawei G610-U20 is based on the MTK processor, which means that the firmware procedure is available through a special application. In general, the process is standard, but there are certain nuances for the model we are considered. The device has been released for a long time, so it is necessary to use not the latest version of the application with SECBoot support - v3.1320.0.174.. The desired package is available for download by reference:

It is important to note that the firmware via SP Flashtool according to the instructions below is an effective way to restore the non-working in the Huawei G610 smartphone software.

It is extremely recommended to use on versions below B116! This can lead to the inoperability of the smartphone screen after the firmware! If still installed the old version and the device does not work, simply flash Android from B116 and higher according to the instructions.

Download and unpack a package with the program. The name of the folder containing the SP Flashtool files should not contain Russian letters and spaces.

We download and install the drivers in any available way. To check the correctness of the driver installation, you need to connect the shut off smartphone to the PC when open "Device Manager". For a short time, the item should appear in the list of devices. "MediaTek Preloader USB VCOM (Android)".

Download the necessary official firmware for SP FT. Multiple versions are available for download.
Unpack the received package to the folder whose name does not contain spaces and Russian letters.

Turn off your smartphone and remove the battery. We connect the machine without battery to the USB port of the computer.
Run SP Flash Tool by clicking twice the file Flash_Tool.exe.Located in the folder with the application.

First write the section "SEC_RO". Add a scatter file to the application containing a description of this section. To do this, use a button. The required file is located in the folder "REWORK-SECRO", in the directory with a unpacked firmware.

Press the button "DOWNLOAD" and confirm the consent to the start of the recording process of a separate section by pressing the button "Yes" in the window "Download Warning".

After the progressbar is displayed «0%» , insert the battery to the USB device connected via USB.

The process of recording the section will begin "SEC_RO",

upon completion of which the window appears "Download OK"containing a green circle image. The whole process passes almost instantly.

The message confirming the success of the procedure must be closed. Then turn off the USB device, remove the battery and connect the YUSB cable to the smartphone again.
We download the data to the remaining G610-U20 memory partitions. Add a scatter file located in the main folder with the firmware - MT6589_Android_scatter_emmc.txt.

As you can see, as a result of the previous step in the partitions field and paths, the SP Flash Tool applies checkboxes in all check boxes. We are convinced of this and press the button "DOWNLOAD".

We wait for the end of the process of checking the checksums accompanied by repeatedly filling the progressbar violet color.

After the appearance of the value «0%» In the progressbar insert the battery to the smartphone connected to the USB.

The process of transferring information to the device memory is accompanied by filling out the execution indicator.

Upon completion of all manipulations, a window appears again. "Download OK"confirming the success of operations.

Turn off the USB cable from the machine and start it with a long press key "Food". The first launch after the above operations is quite long.

Method 4: Custom firmware

All of the above methods of firmware G610-U20 as a result of its execution provide the user with the official software from the manufacturer. Unfortunately, the time that has passed since the removal of the model from production is too large - the official updates of the G610-U20 software, Huawei does not plan. The latest released version is B126, which is based on the outdated Android 4.2.1.

The provision with official software in the case of the apparatus under consideration, does not instim optimism, should be stated. But there is a way out. And this is the installation of custom firmware. This solution will allow you to get on the device relative to Fresh Android 4.4.4 and the new application of applications from Google - Art.

The popularity of Huawei G610-U20 led to the appearance of a huge number of customers for the device, as well as various ports from other devices.

The example described below uses one of the most stable solutions among customs for the G610 - AOSP, as well as as an installation tool. Unfortunately, on the official website of the TeamWin version of the medium for the device under consideration is missing, but there are useful options ported from other smartphones of this recovery. Installing such a recovery environment is also somewhat non-standard.

We establish a modified recovery. For G610, the installation of the environment is made via SP FlashTool. Instructions for installing additional components through the application are set out in the article:
The second method, with which you can easily install custom recovery without a PC, is the use of android application MobileUncle MTK Tools. We use this wonderful tool. We download the latest version of the program on the link above and install how any other APK file.

We place the file image of the recovery in the root of the memory card installed in the device.

Run MobileUncle Tools. We provide a superuser program.

Select item "Recovery Update". The screen opens, at the top of which the file image is automatically added from the recovery, copied to the root of the memory card. Click to the name of the file.

Confirm the installation by pressing the button Ok.

Upon completion of the MobileUuncle procedure, it proposes to reboot immediately into the recovery. Press the button "Cancel".

If file zip. With custom firmware, it was not copied to a memory card in advance, carry it there before rebooting on the recovery environment.
Reboot to the recovery through MobileUncle by selecting the Main Menu application. And confirm the reboot by pressing the button Ok.

We flash the zip-package with software. Details of the manipulation are described in the article on the link above, we will dwell here only at some points. The first and mandatory step after loading in TWRP when switching to custom firmware is cleaning sections "DATA", "Cache", "Dalvik".

Install the caste through the menu "Installation" On the main screen TWRP.

Install Gapps if the firmware does not contain Google services. You can download the desired package containing Google applications by reference above or from the official project site:

On the official website of the project, we choose the architecture - "ARM", Android version - "4.4". And also determine the composition of the package, after which we press the button "Download" With the image of the arrow.
Upon completion of all manipulations, you need to restart the smartphone. And here at this final step, we are not waiting for a very pleasant feature of the device. Reload from TWRP in Android by selecting the item will not work. Smartphone just turns off and run it by pressing a button "Food" will not work.

The way out of the situation is quite simple. After all manipulations in TWRP, we complete work with the recovery environment by the choice of items - "Turning off". Then remove the battery and insert it again. Run Huawei G610-U20 by pressing a button "Food". The first launch is quite long.

Thus, applying the above methods of working with the memory sections of the smartphone, the ability to fully update the software part of the apparatus and recover if necessary.