How to find computer settings on Windows 10. Viewing basic information about your Windows computer

In this article, we will show you how to find out the characteristics of your computer using the built-in tools of Windows 10, as well as using third-party programs. This information can be useful when installing drivers, computer games, or comparing configurations of different computers.

Method number 1. Information about the computer and Device Manager.

The easiest way to find out the basic specifications of your computer is to open the Computer Information window. This window can be accessed by following the path "Control Panel - System and Security - System" or by using the Windows + Pause / Break key combination.

In the "Computer Information" window you can, its clock frequency as well. In addition, a large amount of information about the operating system is available here. For example, this includes the Windows edition, bitness, computer name, workgroup name, and so on.

In addition, on the right side of the "Computer Information" window is, with which you can also find out some of the characteristics of your computer.

Subject to the presence of installed drivers, in the "Device Manager" you can find out the names of almost all components of the computer. Among which are a processor, video card, sound card, network card, etc.

But, if the drivers are not installed, then the "Device Manager" may not help you, because the computer components will be displayed as unknown devices.

Method number 2. DirectX Diagnostic Tool (dxdiag).

The DirectX Diagnostic Tool is a utility built into Windows 10 that targets. But, with its help, you can also find out all the basic characteristics of your computer. In order to open the "DirectX Diagnostic Tool" you need to press the key combination Windows + R, enter the command "dxdiag" and press Enter.

This will open the DirectX Diagnostic Tool window. Here you can see the manufacturer and the name of the computer (often the same as the manufacturer and the name of the motherboard), information about the BIOS, the name of the processor and the amount of RAM.

If you go to the "Display" tab, you can find out some more information about the characteristics of your computer. In particular, the name of the video card, monitor, resolution, etc. is indicated here.

As with Device Manager, if the drivers are not installed on the computer, the information about the characteristics of the computer may not be complete.

Method number 3. Third-party programs.

If drivers are not installed on your computer or you need the most detailed information about the characteristics of your computer, then you cannot do without third-party programs. There are many different programs for viewing the characteristics of a computer. In this article, we will consider only a few of the most popular ones.

CPU-Z is a free program for viewing the characteristics of the processor and other computer components. Using CPU-Z, you can find out the characteristics of the processor, motherboard, RAM and video card.

You can download CPU-Z.

In Windows 10, you can see the characteristics of your computer, including the BIOS version, motherboard model, processor, hard drive, graphics, OS, and other specifications in various ways. The information available will vary slightly depending on the tool you are using.

Testing a Configuration Using the Options Tool

If you want a basic overview of your PC's configuration, the Settings app can provide a variety of information about your hardware and software.

Follow these steps:

• Right-click the Start menu, then open Settings
• "System".
• "About the program".

How to find out the configuration using system information

System Information is not a very new solution, but it is still one of the best. It can be used to view complete system specifications.

To open the data, do the following:

• In the "Start" menu go to the "Run" item, type and press Enter.

Whatever hardware is on your computer, chances are that you will be able to find it in your system data. When you run the tool, you will see a summary that includes your motherboard, BIOS, CPU, last firmware update date, and installed memory.

The graphics card model is not available in the Summary, but if you want to find out, you can quickly find this information by expanding Components and clicking Display.

How to create a complete report

One of the important features of System Information is the ability to create a report with all specifications. This is very useful if you are experiencing a hardware failure and the machine will not boot. If you run it by saving it to OneDrive, it will be available anyway, even if the PC itself is no longer running.

To create, do the following:

This summary is a text file and can be viewed in any editor.

How to find parameters from the command line

You can also use systeminfo.exe. The tool is a command line tool; it allows you to get more data about your PC. It will even show you when Windows was installed!

• From the start menu, launch Command Prompt (PowerShell).
• Type and press Enter.

You can view the characteristics of a computer on Windows 10 by holding down a few keys. Most of the information is presented in the Task Manager. You just need to know where to look. The rest of the data can be retrieved from the Options snap-in.

Today is not the best day to look at the System Properties for the specified purpose, but we will do that too. So that readers have a full range of knowledge on the specified topic. You will see that you can find out almost everything about your PC without resorting to specialized utilities.

Command line

The command line is becoming more and more like a tool to execute. The only difference is in the method of calling:

1. Command line via Win + X.
2. Run - Win + R.

Both tools can be called crosswise. Command line from Run via cmd, and Run from the command line via C: \\ Windows \\ system32 \\ rundll32.exe shell32.dll, # 61. You should understand that both instruments are very similar to each other. Find out the characteristics of the OS:

What have we learned from this screen? A lot of things:

• The professional version of the dozen is used.
• Anniversary Update 1607 installed.
• Build - 14393.693.

But these data are still scarce. Why Billy Gates did not specify the bit depth remains a mystery. Generally speaking, Microsoft has taken a course to get rid of 32-bit hardware, so in 5 years no one will have such questions as we do.

Via System Properties

Press Win + Break to see a little more information.

Some data about the hardware are already presented here. In addition, we see that the system capacity is 64 bits. Here's what you can understand from the screen:

1. Intel processor generation i5 with a frequency of 3.2 GHz.
2. The RAM size is 16 GB, of which so many are available.
3. The name of the PC and its working group have become known.

Actually, that's all. In our opinion, it is bad that the number of cores, the type of graphics, the location and occupancy of DIMM slots, and the speed of memory access are not indicated. On some laptops, this combination does not work (given the fact that sometimes you have to press Fn). In this case, go through the Control Panel:

Via Options

In fact, we see the same as in the Properties ...

Task Manager

We still have to learn something about the graphics part of the PC.

Other information via DirectX dialog

• Win + R.
• We type dxdiag.
• Enter.

Motherboard

Already in the first window we see the missing information.

After the language, the data goes in order:

1. Motherboard manufacturer.
2. The name of the motherboard.
3. BIOS firmware version.
4. The size of the paging file.
5. DirectX version.

Graphics

The following screen demonstrates the capabilities of the graphics.

In order, here are indicated:

1. Graphics type. In this case, it is the HD Graphics 530 integrated into the processor.
2. Memory.
3. Current screen resolution.

You can look at other bookmarks, but the information taken from there will tell a lot only to professionals.

What else?

What more could you want more than we already have? Well, I would like to have an idea about the following parameters:

1. Processor socket name.
2. The number of connectors for graphics accelerators.
3. Hard disk interface.

Actually, many will limit themselves to this. That is, we have already received all the information from the system utilities, and now we are thinking about where to get the rest. Usually they use AIDA. Here is an example of CPU data.

Socket type is now known - LGA 1151. With this data, you can look after a new processor. Could this information have been dispensed with? Oh sure. Third-party utilities are needed by professionals whose time is money. Billy Gates will help mere mortals to get the system settings in Windows 10.

feetch.com

Viewing computer characteristics on Win 10

Each user of a personal computer sooner or later thinks about its internal components. This can be due to both disappointing PC performance and curiosity. This article will fully describe all the paths by which you can learn everything about your computer.

Components, their impact on overall performance

1. Although the computer is based on the motherboard, the most important component is the processor. Depending on the manufacturer (amd or intel), the series, the number of its cores and the clock frequency, its power depends.
2. Next on the list is the video card. Here you only need to look closely at the manufacturer (Radeon or Nvidia), the amount of video memory and the series. More often than not, the higher the series number of a video card, the higher its performance and value. For example, GTX GeForce 760
3. RAM directly affects the performance of a PC, so the more memory, the more concurrent processes you can run. Frequency rarely affects anything, so be guided by its quantity. For example 4096 MB

Knowing the name of the motherboard, you can easily determine any property, whether a new processor, video card or memory is suitable for it. It is the connecting component of all other components, so you should not neglect it either.

No system is complete without a power supply. But if you need to see its power, you will not be able to do it with the help of all kinds of programs. In any case, you will have to open the case cover and look at the sticker.

How to view computer parameters. There are many ways to find out the properties of your PC. We will tell you about the simplest and most practical ways, both for beginners and experienced ones.

First part. Windows built-in utilities

The very first on this list will be the msinfo32 command. You need to enter it using the Run program, which can be invoked by the Win + R key combination, or by right-clicking on Start and finding it in the list.

A plus is the presence of msinfo32 on all Windows operating systems, from XP to Windows 10. The processor name is on the main page, but to find out information about the video card, you need to go to Components -> Display, where you will find all the information you need.

The only drawback is the non-intuitive arrangement of the parameters, which can be a critical factor for beginners. Also, even on powerful systems, the menu itself can slow down when moving to other sections, which significantly reduces the practicality of this utility.

Systeminfo command

The systeminfo command is also present on all popular versions of Windows, but this method is not suitable for beginners. It is popular among sysadmins, since one list contains a lot of accurate data, which, moreover, can be easily copied in a couple of clicks.

To see all the parameters of the computer following this method, you need to enter the command "cmd" in the same "Run" to bring up a command prompt window. And already in the line itself we enter the command "systeminfo". It looks like this.

It is worth noting that complete information about the network adapter and memory (physical, virtual) is provided here, despite the fact that there is no information about the video card here.

Information via DirectX

The third method is rather non-standard, but simple. In the Run window, just enter the dxdiag command. It provides information about the DirectX version, which is also important.

There are also alternative methods, which you can familiarize yourself with by watching several videos.

In fact, the most practical and popular way is to install additional software. It is very convenient to use for both beginners and avid users. Especially when you consider the number and variety of existing software products. Although, despite this, only a couple of them are worth recommending.

Leader - AIDA64

AIDA64 is currently the leader in the field of programs that visualize the state of the computer. In addition to the components, you can check the voltage that is supplied to each element of the PC. You can check the temperature and look at the values ​​of all kinds of sensors.

The leadership of AIDA64 can be attributed to the fact that both beginners and experienced programmers use it. In addition, there are several versions of AIDA64, in the form of an engineering, extreme, business version, and others.

If you want to evaluate its interface and work, you can watch a couple of thematic videos.

The second, less popular among professionals, is the Piriform Speccy program. Its target functionality is information about components and nothing more. Quite minimalistic in design, easy to work with. For beginners in the field of components - just right. It is worth noting that in it you can see the number of free slots in the motherboard for RAM, since it takes all the information directly from the BIOS.

Of course, you always have the right to choose the program that will meet your requirements. Here is a list of additional notorious programs that you may want to look at.

• CPU-Z. Very much to the liking of overclockers and people whose work is directly related to the control of the life of the PC.
• HWMonitor. Probably, it most fully visualizes all kinds of data, in the form of temperature, speed and load of coolers, voltage, etc.
• SiSoftware Sandra. Has fallen in love with users since the days of Windows XP and Windows 7 for its pleasant interface.

Bottom line.

If, before reading this article, you were puzzled about how to find out the computer settings, now you know which option suits you best. As we found out, installing additional programs is not something special, but on the contrary, a thing that greatly facilitates working with a PC.

secretwindows.ru

How to view computer settings - all methods

Often, computer users do not even know about all the capabilities of their device. With the aim of enlightening them, this article has been written. The following are the main ways to view the computer settings: system and software. Reasons for familiarizing yourself with computer settings. The question of what are the parameters of a particular computer occurs in the following situations:

• if necessary, install the drivers;
• in cases when it is necessary to test the temperature conditions of the components;
• in case of failures and "glitches";
• when you need to create a competent description of the device for subsequent sale;
• when installing powerful software / video games, etc.

The main methods are similar for modern versions of Windows OS (7-8-10), but they still need to be considered in more detail.

How to view computer settings on Windows 7

It's worth starting with the simplest ways:

• launching the "System Information" utility;
• viewing information through the system properties panel;
• through the device manager;
• through the system utility for DirectX diagnostics.

Method number 1. You can use this function in any operating system listed above. First you need to enter "Start" or start "Run" by pressing the key combination "Win" + "R". How to call the command line was written here.

If for some reason you cannot enter the name of the utility from the keyboard, then you need to get to the startup file along the following path:

Method number 2. Again, the method is not complicated, since you can get to the desired menu if you select "Properties" by right-clicking on the "Computer" icon that is on the desktop, or, if it is not there, then do it with the "Computer" item in the "Start" ".

You can also get to this section of properties through the "Control Panel", after entering which you need to select the "Properties" icon of the same name.

In addition to viewing information about the PC in this paragraph, you can evaluate the entire system by clicking a button with the appropriate name, which will make it possible to judge the performance of a particular device. Method number 3. The above method allows you to view only general information about the computer and the system, and you can study the configuration of the existing equipment in more detail if you select the "Device Manager" item in the open above menu.

As you can see in the screenshot, in the window that opens, you can view the list of devices connected to the computer, and by double-clicking on any of the objects, you can study more detailed information about it. Method number 4. And this method is not much different from the first, since you must enter the name of the program, as shown in the screenshot, all in the same lines "Start" or "Run".

This method is also the easiest, provided that the DirectX version (software package) is installed.

If you want to know the characteristics of a video card, then here is a separate article.

How to view computer settings on Windows 8

Some of the above methods work for Windows 8, but there are other functions in this version of the OS:

How to view computer settings on Windows 10

The newest OS, in fact, differs only in that access to all the menus we need is located in one place. It is enough to right-click on the "Start" icon to open the context menu, and then select:

If, for example, you need to study in more detail the information about the graphics adapter installed on a specific computer with Windows 10, then you should right-click on an empty space on the desktop and then proceed as shown in the screenshots.

Programs for viewing and analyzing computer parameters

Above, it is described in detail where to look at the parameters of the computer, if you use only system tools, but an even more detailed description of the main points can be obtained by installing special software. To date, there are a lot of such programs and many of them are completely free of charge provided by developers for non-commercial use on home PCs.

TOP-3 software for viewing and evaluating PC parameters:

Viewing parameters via BIOS

This method is not particularly effective, but if, for example, there is no way to start the system, then you can always look at some parameters in the BIOS. To do this, even when you turn on the computer, you need to press the desired button in the first window. Below is a list of buttons for major PC and laptop manufacturers.

There is a separate article on how to enter bios on different computers.

Above is a detailed description of how to check the PC parameters. Follow the instructions and then properly configure or install the software to match the information.

it-increment.ru

How to open Windows 10 system properties

Windows system properties

The interface changes from version to version in Windows operating systems. The user has to get used to the new interface, which sometimes leads to difficulties in setting up the system. However, at a fundamental level, all operating systems from Microsoft are not strikingly different. And all settings can be easily found in any version of Windows. Let's take a look at the example of opening the system properties window in Windows 10.

Hotkeys for calling a window with system properties

Win + Pause / Break - the key combination calls the system properties in any version of Windows from XP to Windows 10. The simplest and fastest way.

Opening system properties using a keyboard shortcut

Only two keys on the keyboard. In some laptop models, you will have to additionally hold down the Fn key, since Pause is there as an additional function on the Break key.

Text command to launch basic properties of Windows 10 system

Perhaps someone will find it much more difficult than the previous method. It may seem useless. However, there are situations when it is impossible to press a key combination. For example, when connected to a computer remotely, hotkeys may not be available.

Through the "Run" applet

In this case, you can start viewing basic information about the computer using the command line or the "Run ..." applet. The latter can be opened through the Start menu, or by the Win + R key combination.

Type the command:

control / name microsoft.system

Command to open windows system properties

It is not difficult to remember it, and in extreme situations it will work in any version of Windows, except XP. It works in the 10th version of the system, it will probably work in many more subsequent ones. It could be much faster than looking for where the developers removed access to the system properties this time. This command can be further simplified and simply typed

Through the command line

The same command is entered through the Windows 10 command line. It, in turn, can also be called through the "execute" applet by typing cmd

Through the start menu

Through Start, you can open system properties in Windows 10 in several ways. I find all of them inconvenient, but they are there and our guide would be incomplete if we left them out.

Computer settings

This option appeared only in Windows 10. Something similar exists in Windows 8, but there the settings are launched from a different location.

Open system properties in Windows 10

So click Start> Settings> System> About System> System Information

Through Windows Utilities

In this case, the sequence of clicks will be different Start> All Applications> System-Windows> This PC> in the right-click Properties dialog box

My Computer icon in Windows 10

Surely many people remember that in previous versions the icon "My Computer" was located on the desktop. And in the context menu of this icon there was the "Properties" item. So in this method we use the same icon. We can simply drag it to the desktop with Drag-n-Drop and open the properties of the computer through its context menu.

This icon, of course, differs from the same "My Computer", since in Windows 7 and earlier it was not a shortcut, but a special icon. Now we can only create a shortcut to it, which is why in the context menu you can see two items "Properties". The second is just the properties of the shortcut, so the first is needed.

Through the control panel

System properties can also be opened through the control panel. Which can also be launched in two ways.

Quick access to the control panel in Windows from the keyboard

My favorite way is with the command through the "Run ..." applet You can also type this command in the console.

Windows Control Panel Quick Launch

This method of opening Control Panel works in Windows 10, however it works for any version of Windows.

Launching the Windows 10 Control Panel from the Start Menu

Click the following items in the menu:

Start> All Programs> System-Windows> Control Panel

Open system properties through Windows 10 Control Panel

In the control panel, you need to open "System and Security" then click the main item "System" or the sub-item "View the amount of RAM and processor speed"

Opening Windows 10 System Properties through Control Panel

answit.com

How to find out the version of the operating system Windows 7, 8, 10 on a computer or laptop

Finding out the version of the installed operating system from Microsoft is quite simple. This action does not require downloading additional software products - all the required tools are built out of the box in Windows.

For example, you can use the console. To access the command line you need:

1. Using the Win + R key combination, call the Run utility, enter cmd in it and press the Enter key;
2. You can also just write cmd in the search.

Here you need to use the systeminfo system command, after which all detailed information will appear on the screen:

The first value of the first marked parameter shows the version of the system, the number after the dot changes after a large-scale update, and the last value provides information about the assembly or, as they say, "build". The system type data shows a 32 or 64 bit system. The difference between them is that the former can use no more than 4GB of RAM, while the latter is able to use much larger resources than even 32GB of RAM.

At boot time

When releasing a new system, Microsoft is developing a unique logo for it, so you can draw initial conclusions during the launch process.

This is what Windows 7 looks like:

Windows 8 interface:

This is what the current Windows 10 looks like at boot time:

It is recommended to use the system information for more detailed information.

We use information about the system

Windows 7

The interface in different versions of Windows has its own individual characteristics, so the procedure may differ. For example, in Window 7, the easiest way to get the information you need is as follows:

The version of the operating system is marked with a red marker, the building is highlighted in blue, purple indicates the system bitness. The final performance of the device is highlighted in green, and the maximum possible score here is at around 10 points.

How to set up local network in Windows 10

Windows 8

It is also quite easy to obtain information in this version of the operating system. This requires:

Windows 10

The latest version of the operating system of the American corporation is also notable for its availability and simplicity. There is an alternative command for the console, after entering which the following window will pop up:

To display it, you need to enter the line winver in cmd. This window does not provide such detailed information as what is opened using systeminfo, but it copes with the main task.

In addition, you can use the following instruction:

You can also go to "Options" using the keyboard by pressing the Win + I buttons.

In addition, it is possible to use the shortcut "My Computer", which is called "This Computer" here and is not present by default. To display it on the desktop, right-click anywhere in it and go to the "Personalization" section. In the window that appears, click on "Desktop Icon Options".

1. It is urgently needed, in other words, how to use the operating system (without opening the lid of the system unit) to determine the model of the processor, video card, motherboard, and so on?
2. Hi admin! Recently, my friends and I decided to make a gift to a friend for an anniversary, they asked what he needed, and he said - give me a video card and an interesting computer toy. We came to a computer store and say - sell us a video card, and sales consultants say - please, tell us the characteristics of your computer! And how do we know these characteristics. We called a friend, but he also has no idea, he just knows the processor from Intel. Interestingly, they don't sell the toy either, they say - find out the characteristics of the computer and we will pick up a toy for you, otherwise the toy will not go and bring it back, there are many of you such illiterate people walking around here. Find out at least what kind of processor you have and what power supply unit you have.

In short, it turns out that among all my friends, only you are the administrator who understands computers. We are waiting for help from your site!

How to find out the characteristics of your computer

Friends, there are a dozen ways find out the characteristics of your computer in a few seconds. Let's not waste your time talking and get down to business.

The # 1 way to find out the characteristics of your computer

In the input field, enter the command Msinfo32

and press Enter on the keyboard. In a second, complete information about our computer and the installed operating system comes out. We immediately see the model of our processor, its frequency and number of cores, the manufacturer of the motherboard, the amount of RAM and a lot of other information.

If we want to install the video card model, click on the plus sign and open the Components branch and select the Display item, see the name of our video card, its memory size, driver version, and so on.

The way to find out the characteristics of your computer number 2

Right-click on the This computer icon and select Properties.

The System window will open, as we see there is also a lot of information, the release of Windows, the name of the processor model and its frequency. This is the easiest way.

The way to find out the characteristics of your computer number 3

Right-click in the left corner of the desktop and select Run.

In the input field, enter the dxdiag.exe command, the System window will open, it also displays the characteristics of our computer: operating system, processor, memory.

Go to the Screen tab and see the characteristics of the video card and monitor.

The way to find out the characteristics of your computer number 4.

Download the cool tiny little program CPU-Z (I carry it with me on a flash drive all the time) on the site http://www.cpuid.com/softwares/cpu-z.html and you will find out the most detailed characteristics of your processor (CPU tab),

Motherboard - model, chipset, (Mainboard tab),

RAM (Memory tab)

And video cards (Graphics tab).

Or you can use for these purposes.

The way to find out the characteristics of your computer number 5

A lot of things can be learned in the BIOS of your computer, press the Delete key when the computer boots up and enter the BIOS. We immediately see the model of our motherboard and processor, the amount of installed RAM.

other methods

When you turn on the computer, look at the information on the monitor screen, pause on the keyboard and rewrite the characteristics.

And finally, the power of the power supply can only be found by removing the side cover of the system unit and looking at the sticker of the power supply itself. You will not get anything for this and the computer should not be removed from the warranty.

Read, where in Windows 10 to view complete information about the computer and its devices... What standard applications or third-party utilities to use for this. Sometimes you may need to quickly find information about your computer's configuration, operating system, installed drivers and supported technical modules, for example, the exact model of the network card, version "BIOS" or "UEFI", or which version "DirectX" installed on your PC.

In this article, I will discuss some of the standard operating system tools that provide this system information, both general and more detailed.

Content:

We learn basic information using a standard application "Options"

If you want to see a basic overview of your system, then it can be found in the standard appendix "Options", for both Windows 8 and Windows 10. To open an application, press "Start" and then click on the button "Options"(gear icon) in the lower left corner of the window, or press the keyboard shortcut Windows + I... Next in the application, click on the icon "System".

After that, on the page that opens, go to the tab in the menu on the left.

Three sections with information will be displayed on the right side of the window. In the first, information about the protection of your PC in real time will be shown, the section provides basic information about the configuration of your PC, processor model, amount of RAM, device and product identifiers, and the type of system used (32-bit or 64-bit) ...

The section contains the name and version of your operating system, the date of installation and the build number of Windows. Also in this window, you can follow the links: key update and OS reactivation, read the license agreement and service agreement Microsoft.

The standard subroutine gives more detailed information

The (System Information) application was added back in Windows XP. With its help, you can see a much more detailed overview of both system information and information about the equipment used, much more informative than the previous method.

To open the window, press the combination Windows + R, and in the opened dialog "Run" enter "Msinfo32" and click "Enter".

The home page will immediately provide much more information than we saw in the app. "Options"... Here it is listed in more detail, your PC manufacturer, detailed configuration information, BIOS version, motherboard model, installed RAM, etc.

But this is just the beginning. Expand the tree of tabs in the menu on the left, and you will see the real functionality of this application. Most of this information is probably useful only for software developers and system administrators, but at the same time, there is almost all the necessary data about the system.

For example, in the section "Components" click on the field "Network" and further "Adapter" and the program will display complete information about the device: name, model of your network card, manufacturer, driver versions, current state, as well as all related settings that are currently used.

Another great feature of this software is the ability to export information of interest to a text file. This option is extremely useful when you need to send data about your system or hardware errors to another user, for example, to support, or if you just want to keep a copy of your configuration and system settings just in case.

First, you need to select the desired section or subsection, the information from which you want to export. If you select a section, the exported file will contain data from all sections that are available in the application. But you can also select any individual section or subsection to save only specific information.

Then open the menu "File" and click on the command "Export".

A standard dialog for saving a file in Windows will open, just go to the desired directory and enter the names of the new report and press the button "Save".

Now at any time, you can easily open this file and view all the information and settings that interest you.

System Information on the Command Line

If Windows does not boot in normal operating mode, you can use the special command to get system information. "Command line"... Using this option, you will not be able to get as detailed information as in the application, and, perhaps, this option is more complex than a regular application, but still this command will be extremely useful in the case when the operating system starts "Show off" and stops loading normally.

After the standard command line prompt, you need to go to the directory where this program is located, enter the following command "Cd C: \ Windows \ System32"... Next enter the command "Systeminfo" and press "Enter"... After a little analysis, the program will display several lines of information you need about the build and OS version, processor, BIOS version, boot disk, memory and network information.

Device Manager in Windows 10

Device Manager is a standard component of the operating system that provides information about all devices connected and in use at the moment. It is also the only driver management tool for each installed device, manages the resources allocated to it (interrupt requests, DMA channels, memory areas, I / O ports). It also provides a lot of additional information.

You can open it in Windows 10 in several ways, the easiest is through the search, for this click on the icon "Search" and start typing the expression, our option will be at the very top of the search results list.

In the window that opens, all installed devices on your PC will be presented.

Go to any section, for example "Network adapters" and click on the line with the device name.

The properties window of this equipment will immediately open, at the top you will see several tabs: events related to the operation of the device, the resources it uses, power management, general information about the device and driver management. Actually, all the functionality of managing this device is collected here, you can update the driver, remove the device, turn it off, and so on.

How to find out the version "DirectX"

"DirectX" Is a special set of ready-made graphic elements, procedures and functions that the Windows operating system provides for use by external programs. "DirectX" specially designed by the company Microsoft to facilitate the development of graphical applications for Windows, most programs, one way or another, but use it to visualize all kinds of data. Most often it is used to write computer games. And if you installed a game that needs a newer version to work properly "DirectX" than the one installed on your PC. Then, having found out which version is installed, you can understand whether you need to update it or not.

The easiest way to do this is by running the standard OS utility. To do this, press the keyboard shortcut Windows + R, and in the window that appears "Run" enter and press "Enter".

As a result, the utility will start DirectX Diagnostic Tool... The first tab of the program window will display some information about the PC and version information "DirectX"... In fact, this inscription only says which version of the program is active and in use at the moment, and not which version is the last one installed on your PC. After updating the "Windows 10 Fall Creators Update" in this window, the utility always shows version 12. But then the question arises that not every video card can support this "DirectX"... The version of the program that your device supports can be found in the section "Screen" standard application "Options" Windows.

Additional utilities

Of course, there is a whole host of third-party paid and free software available on the Internet that can provide even more specialized information.

For example, if you reinstalled the operating system, and the new OS did not install the necessary drivers for all the necessary devices, and they are not displayed correctly in "Task Manager" or are not working at full capacity. Then free software can help in such a situation - "CPU-Z"... You can easily download it from the official website of the developers.

The program will scan your system and display the most complete information about the configuration of your PC, even without the installed drivers. Information about the motherboard, processor, RAM and slots for it, information about the video card, the program will allow you to test the performance of your processor and compare its results with the rest. It will also provide the ability to save the full report in text or "Html file".