How to get a password from a wifi router. How to find out the password for your Wi-Fi network

Many have found themselves in a situation where Wi-Fi is needed and a smartphone or laptop catches many networks with a good signal, but each network has a password. Of course, we can say that connecting to someone else's network against the will of the owner is ugly. But what if internet connectivity is a matter of life and death? For such cases, there are several working options for bypassing protection:

• brute force;
• change of mac-address;
• hacking programs;
• android applications;
• interception of traffic.

Brute force is a banal selection of all possible combinations of characters that a password can consist of. This is perhaps the easiest way that you can think of, since you don't need special knowledge or complicated software... But, on the other hand, the complexity of the method lies in the fact that it is quite dreary and the process can take a very long time if the owner has set a rather complex password.

Automatic selection of combinations

It is not necessary to carry out this operation manually. There are quite a few programs that automatically select combinations sequentially. It is much faster and easier for the user. But keep in mind that finding the right combination can take quite a while. long time even if you use special software. A simple password like qwertyui can be cracked in less than a minute, but decrypting / # 7 & //. 'Will take a lot of time.

WiFi Crack

One of the programs for automatic password guessing is WiFi Crack. It's very easy to use.

1. We download the program from any site that distributes such software.
2. We launch the file and see a simple interface in front of us.

   

3. At the top in the "Refresh" line, select the network that needs to be hacked and activate the program by pressing the "Scan for Access points" button.

   

4. We are waiting for the completion of the network scanning process, click on the active button, in our case, " Wi-Fi WPA», With a list of found networks.

   

5. In the "Select Target Access Point" section, click on the desired network.

   

6. In the lower part of the window, click on the "Browse" button to select a file with a dictionary of possible passwords.

   

   

   The note! Most likely, the program will require connecting a dictionary, which it will use to guess passwords. Usually, dictionaries come with the program.

7. Having configured the parameters, press the "Wi-Fi Attack" button and wait for the process to complete.

   

8. The end result of the program will be an inscription with a password under the line "Finished" at the very bottom of the window.

   

9. We return to the program interface and click on the "Key Database" button.

   

10. In the open window, you will see the connection information, including the Wi-Fi password.

    

The note! On average, the program takes 30-90 minutes to crack a password. Since users rarely set really complex passwords, most can be cracked in half an hour. But there are passwords that can take years to crack. So not every network can be hacked.

Change Mac Address

Passwords are not always used as protection for Wi-Fi. Quite often, users use the mac-address filter. From the device, this network will be detected as open and does not require a password. But connecting to it will not work, since our mac address does not pass filtering. So, the only way out is to change the mac-address of the device to a suitable one. But how to do that?

If you have followed these three steps, you will not be able to connect to your network without a password. More precisely, it is possible to connect, but it will take so much time and energy that any cracker will very quickly understand that the game is not worth the trouble.

There are many ways to hack someone else's Wi-Fi. But they are all aimed at users who have not bothered about the security of their connection.

Video - How to hack a neighbor's Wi-Fi password in 5 minutes

This page will tell you how to find out the password for your wi-fi with three different ways:

1. How to find out the password from wifi through a computer.

2. How to find out the password for Wi-Fi via a router.

3. How to find out the Wi-Fi encryption key through the phone.

4. What if all else fails?

There are different situations in life, for example, you set up Wi-Fi at home and forgot your password. Or, for example, you want to connect to a neighbor's Wi-Fi hotspot and use the Internet for free. How do I find out or recover my Wi-Fi password? How do I find out the password for my wifi?

The required steps may differ depending on your specific situation. Ideally, if the Wi-Fi network is your home network and you can get physical access to the wireless network equipment (router, modem, access point, router).

How to find out the password for wifi through a computer?

Recovery forgotten password from Wi-Fi we only need one connected computer to our network. Well, at least one computer, I hope you managed to connect it. Something I am very much extra text I'm writing, let's get down to business!

Take a computer that is successfully connected to our wireless network and right-click on the connection icon (in the lower right corner). Select "Network and Sharing Center".

A window will open in which on the right we select "Manage wireless networks".

Another window will appear, in which we right-click on our connection and select "Properties".

Now go to the "Security" tab and opposite the "Network Security Key", we see the hidden symbols. This is our password, in order to find it out, just put a tick next to "Display entered characters" and you will see the password from your Wi-Fi networks.

Now the most important point, write this password down on a piece of paper and put it in a safe place, just do not forget where you put it.

How to find out the password for Wi-Fi through a router?

This option is perhaps the most effective and affordable, but it requires more steps. If the owner of the computer has not changed the standard access data to the router, this is only on hand (and such, as practice shows, more than 95% of Internet users).

So, we need to go to the address of the router itself. Enumeration options there can be several, for example: http://192.168.0.1/, or http://192.168.0.0/, or http://192.168.1.0/, or http://192.168.1.1/.

If you have chosen the correct address, but you will see a window for entering a login and password to access the router:

Now you need to choose a username and password. In 70% of cases, this is the admin / admin pair, but in the other 30% it can be login / password phrases: root, user. You can select rows of numbers for the password field, in the form: 123456, 12345, 1234567890, 0000, 1111, 11111, etc.

Now you need to find where to look at the password for the router in the menu. Most routers have different interfaces, but the structure is the same. The names may only partially differ, but their meaning is the same. For more convenient navigation, you should switch to the advanced settings mode.

The Wi-Fi subsection contains security settings, and we need them. We follow the links and find the window where the old wi-fi password is indicated and look at it, or change it to a new one:

You need an encryption key (this is the password for the Wi-Fi network). You can enter it on any other device and connect to the Internet.

How do I find out the Wi-Fi encryption key through my phone?

Find out your Wi Fi password on Android

If you used an Android phone or tablet to connect to the network, then you can find out the password in it.

To do this, you need the device to skillfully Root the rights and the appropriate explorer to view the system files.

I will not dwell on this in detail, since the site is not dedicated to this OS, but I can direct you.

You need to go to the root folder of the device, and there already in the data folder:

Then there is a misc folder in which the wifi folder is located, and already there is the wpa_supplicant.conf file we need, which also contains a list of all networks to which you connected:

It remains to open it in some editor and look at the contents and find the password for wi-fi.

What if all else fails?

If the data has not been changed, as mentioned earlier, you should try the password and login "admin" to enter the Wi-Fi router settings.

This is usually the standard data for many models. If you can't log in, the next thing to do is look for the initialization data on the device itself.

The only thing that remains to be done if you forgot the password, and none of the above methods can see it, is to reset the router settings.

To do this, you need to: Find the button (recess) on the router itself. Press on it with a suitable object. Log in to the computer using standard (indicated on the device) data. As you can see, there is nothing difficult in resetting the router settings. The only thing you need to know after such actions is that all network settings will need to be done anew (as when the router was just purchased).

Once, when you connect a new device to your wireless network, the understanding comes that you don't remember wifi password ... The situation is aggravated by the fact that the coveted combination from the router or Wi-Fi access point is forgotten in the same way, and the piece of paper where they are reliably captured in uneven handwriting has disappeared somewhere. If you are confident in your knowledge, then you can hardware reset ALL access point settings and configure everything again, but ... There is a less radical method see the password of the Wi-Fi network!

Instructions will be useful if you have a computer (or laptop) that already has a configured wireless connection to the router, to which you need to connect a new device via Wi-Fi. Since the most popular operating system to this day is Windows, then the proposed instruction should be executed in this OS. How to view Wi-Fi password networks on an Android device - read after the instructions for Win.

How to find out the Wi-Fi password on a computer in Windows.

Probably, it was in case of forgetting the password that the Windows developers provided in their OS such a function as the open output of the memorized in the computer Wi Fi network password. Look it can be done without any "dirty hacks" and tricks. It turns out that passwords are stored in open form without using irreversible hashing (as for accounts, for example). So, below is the instruction for the most popular at the moment Windows 7.

• 1. Click on the wireless network connections in the notification area.
• 2. Go to the Network and Sharing Center.
• 3. In the left column, select "Manage wireless networks".
• 4.In context menu select "Properties" of the Wi-Fi network you are interested in.
• 5. On the "Security" tab, enable "Display entered characters".
• 6. on a new device.

So it is possible see Wi-Fi passwords from all networks that have ever been connected to from this computer. By the way, if you do not want your passwords to wireless hotspots to "float away", then when transferring your computer or laptop into the wrong hands, we recommend delete all saved passwords... To do this, in the context menu (item 4.) select " Delete network».

If you cannot find the corresponding icon in the notification area, then you can go the other way: open the "Start" menu and in the "Find programs and files" field write " wireless". The list of search results will contain and " Wireless network management"- after clicking on it, follow steps 4 and 5 of the instructions above.

By the way, according to the instructions above, you can enter new password to connect. This is useful if the network administrator (it is quite possible - you yourself) changed Wai Fai's password on a router or access point. The above steps apply to the current versions. operating system Windows 7 and 8 (8.1), but reluctantly fading into oblivion Windows XP things are a little different.

Find out the saved WiFi password in Windows XP.

• 1. Open the "control panel".
• 2. Launch the "Wireless Network Wizard".
• 3. Select "Add new computers or devices to WiFi networks"And click" Continue ".
• 4. Select "Install manually" and click "Next".
• 5. In the window that appears, click the "Print network settings" button.

As a result of completing the steps of the instruction, a document will open, in which in the line "Network key (WPA / WEP key)" and contains Wi-FI password saved in Windows XP... As you noticed, only WEP and WPA keys are supported, which currently do not meet security standards. Only WPA2 keys can seriously resist malicious threats.

How to view Wi-Fi passwords in Android.

Android stores passwords for Wi-Fi networks as well as Windows - in cleartext. However, to view the information you need, go to mobile platform must have Root rights- and this is “ pretty evil witchcraft", Unlike Windows. So, on a device with Android 4.2.1 see passwords you can in the file " wpa_supplicant.conf"Located along the path" \ data \ misc \ fiwi \". To access it you will need root rights and some file manager, for example " Root Explorer».

Personally, for some reason I was not able to read its contents directly on my smartphone, but when I copied the file to my computer, I was able to see Wi-Fi passwords networks that have ever been connected to from this device. In fact, it is a regular text file that can be opened even with Notepad in Windows. However, it is much more convenient to use the “Far Manager” file manager - it is the built-in file viewer / editing tool of which the list of passwords was opened. The "ssid" parameter contains the name of the wireless network, and the "psk" contains the coveted combination requested upon connection.

If this instructions the key to your own wireless network has been restored, then there is nothing illegal here. However, in the event that the manual was used to gain access to someone else's "local", then illegal access to information is already clearly visible. In the same way, you can absolutely legally on your computer, but on someone else's - this is punishable by the law on the protection of information.

You can find out the password from a wi fi neighbor by the selection method yourself or using programs

In the modern world, an Internet connection is required almost everywhere. The times when you had to be in an apartment or an Internet club to access the network are long gone, and on the streets you can rarely find a zone without Wi-Fi coverage. Nevertheless, not all points of the wireless network are open for connection, so the question of how to find out the password for Wi-Fi remains incredibly relevant. Also, it is not always about cracking someone else's password. There are times when you need to find out the settings of your own Wi-Fi network or the router password, which has long been forgotten or lost after another error.

How to find out the password of the connected Wi-Fi in your apartment?

If at least 1 computer is connected to the Wi-Fi network

The first thing to consider is how you can find out your password. Today, even a child knows what Wi-Fi is, but, nevertheless, few people think about its safety. As a rule, most users do not change the password for their router, so over time they simply forget: the connection is always available and there is no particular need to know the password. Only when some changes take place, and it becomes inaccessible to sit down, you have to spend hours remembering the correct symbols. How to find out the password of the connected Wi-Fi in this case? In fact, everything is simple, for this you need to have at least one connected computer to your network.

1. First you need to go to the network control center, which can be done in the "Network" tab. To do this, click on the button in the lower left corner of the screen that opens Windows properties, and select the appropriate section.
2. After you have entered the control center, you need to find the subsection "managing wireless networks".
3. Going into it, you will see your network connection, so the next step is to open its properties.
4. In the "Security" section, check the box, after which you will be able to see the encrypted password from the network to which the computer is connected.

If no device is connected to the Wi-Fi network

Although the previously described method is the simplest, and the entire algorithm of actions can be performed even by someone who has never entered the system settings, it is far from always possible to use it. The point is that if you do not have a computer that has a connection to the desired network, then this method will be completely useless. How do I find out the password for a Wi-Fi network if you have no current connections? In this case, you cannot do without the settings of your router.

The most in an efficient way, which is guaranteed to make it possible to find out the password from the wireless network, is setting up the router. It is there that the Current password that is valid for all connected devices.

1. The first thing to do is go to the router settings. It is worth clarifying that while performing this procedure, the device must be connected to your computer, otherwise you simply will not be able to find it.
2. Open the menu in the lower left corner of the screen and select the "Network" tab, where you will see your device. An alternative way would be to load the desired ip-address in your browser, which will also bring up the desired window. As a rule, for routers from different manufacturers, you must enter different numbers, therefore universal way go to its settings does not exist. The required ip-address, as well as the default login and password are always written in the instructions for the device or on the router itself. Check the rating sticker on the back of the adapter.
3. When you have found the required ip-address and data to enter the settings, just enter them in the appropriate fields.
4. After the desired menu opens in front of you, find the control tab wireless network, where your password will be located in the required column.
5. Next, you can either save it and connect from other devices, or change it to more memorable words or numbers.

Video on how to find out the password from wi fi

Many users often ask how to find out the password from a Wi-Fi router if they cannot enter its settings. If for some reason you changed the username or password, which stood by default, but at the same time forgot them, then the only way will reset the device settings. This will allow you to return to the factory default specifications and use the login information provided in the instructions.

How to find out Wi-Fi password on Android?

Given the abundance of various mobile gadgets, many are interested in how to find out the Wi-Fi password on an android. This can only be done if you have root rights to the device. There are two easy ways:

• With the help of a conductor. Download any file manager (the standard one is not suitable, since it does not see hidden and system folders), go to data / misc / and select the wifi folder. In the wpa_supplicant.conf file you will find all saved passwords from any network, so just choose the name you want.
• Find on Google play any application for displaying social media passwords.
• If you are not rooted on the device, then download required application and do everything that is written in the instructions. If your actions are successful and you will receive full access to your tablet or smartphone, then use any of the previous options.

Video on how to find out the wi fi password on android

How to find out the password for someone else's Wi-Fi?

To begin with, it is worth discarding any moral questions and considering directly the methods of hacking someone else's Wi-Fi network. Naturally, everyone pursues different goals, but as a result, hacking is indispensable to gain access to a closed Wi-Fi hotspot. Highlighting the main reasons, the most popular options can be noted:

• A banal desire to find out a neighbor's Wi-Fi password to save money.
• Expensive rates for using the Internet in hotels.
• Fraudulent activities with other people's passwords and data.
• An intentional hack to test the security level.

The last option should be discarded due to the fact that there are only a few such cases and, as a rule, only professionals crack passwords. Fraudulent intentions must also be excluded, since this qualifies as a crime, therefore it is better to focus on how to find out the password from someone else's Wi-Fi for free use of the Internet.

The first method is the simplest and most common, and is achieved by the usual selection simple passwords... As a rule, most of the users are not bothered to set up complex encryption of their network. Moreover, many do not even change standard settings... That is why you can experiment with numbers, for example "1234" or the most popular phrases (qwerty, the name of the network itself, username, etc.). If your neighbor is not particularly resourceful, then sooner or later you will achieve your goal and get access to his wireless network.

When it comes to the selection of symbols in organizations, hotels and other public places, things are a little more complicated. Usually, in such cases, a series of not particularly complex numbers is used, so that the password is easy to remember, but not picked up in a few minutes. For example, seven sevens or the reverse order of the numbers from 9 to 1 are fairly common choices, so it's best to start with them.

The second method is more complicated, but it is guaranteed to achieve the goal. It is an automated form of the first option and is called "boot-force". Firstly, you need to have a laptop, as well as a fairly powerful internet connection so that the cracking program can brute-force the password from the databases. It usually takes a certain amount of time, but in the end provides almost 100% of the result. The only exceptions are the most complex passwords of numerous letters, numbers and other characters, which are extremely difficult to find even with the help of the program.

The third way to hack is to exploit the vulnerability of the WPS connection. If a particular access point supports this technology, then hacking will not be difficult. It is worth clarifying that without certain knowledge and understanding of the process, it is unlikely that you will be able to achieve your goal in this way. Nevertheless, if you understand how to proceed, then even passwords of 30-40 characters will not be an obstacle.

How to protect your network from hacking?

You need to think not only about how to strengthen the Wi-Fi signal, but also how you can protect your network from hacking attempts. It is worth clarifying that this is due not only to a reluctance to share their own Internet, but also to maintain its speed.

• Use the most complex passwords. It should be understood that the cat's birthday or numbers from 1 to 5 are not the values ​​that will avoid hacking. Use passwords with different characters, uppercase and lowercase letters, and numbers. Try to keep the password as incomprehensible as possible, but at the same time you can remember it.
• If your Wi-Fi hotspot supports WPS, then disable this function in the settings to avoid hacking using its vulnerability.
• Change your password once a month. Even if they try to hack you with automatic programs, then the usual scheduled password change, for example, every 2-4 weeks, will completely eliminate the occurrence of such problems.

Have you found yourself in a situation where you needed to somehow find out the password for Wi-Fi? What did you do for this? Tell us about it in

The access key to the network or to the network administrator page, lost do not be discouraged. It is possible to restore them. This article will help you solve this problem.

Standard passwords for routers

Each wifi router operates on the basis of access data to the Internet and the local network, which are login and password. They are created at the very beginning of use at the first stages of setting up network equipment. The login is always the same word in the Latin alphabet "admin", and the password can be either the word "admin" or the numbers 1234, 123, 0000.

Also, the password may not be present at all. And for the operator Kyivstar, such a login is possible.

In any case, in order not to try your luck and not waste time on random selection, you need to look at the data sheet of the router, which is included in the kit and may look like a brochure. If the router came to the user as a second-hand product and the technical passport is not available, you should ask your friends, acquaintances or relatives who use a network device produced by the same manufacturer. login and password will be the same.

Factory settings

At the initial stage of configuration, after entering the standard identification data, the user will be offered the opportunity to change the login and password to make it difficult for unauthorized users to enter the domain. Those. on the computer screen, the interface will display all the necessary data, as well as hints on the formation of an "access key", which includes the login and password.

After passing this stage, the user will be prompted to create local area network with automatic connection to the Internet for the convenience of working in the future. At the same time, you should not confuse the login and password for accessing a local network operating on the basis of a router and the Internet, because they are two different things.

Forgot the password from the router, what to do

What to do if you forgot your router password is a common question for many users who have forgotten or lost their data. How to be in this situation? Recovering the key is easy. It all depends on which network password and login was lost. If the matter is in the local network, i.e. in your router, there is no serious 2. difficulty to restore it.

Video: Resetting TP-Link Router Interface Password

If the user has forgotten the password of the Wi-Fi router, he needs to act as follows:

How to recover the password and login for the router, if they are required to access the Internet?

In case of loss of data for the use of resources world wide web the following procedure is required:

Thus, the user has the opportunity to independently correct the situation without outside help.

Recovering an administrator's domain

In addition to those users who have lost data on access to the local network and the Internet, there are those who manage to lose access to the administrator page ( home page router). In this case, there is no chance to recover the lost information and change the settings of the network device. On the forums, there is often a question like: “I forgot my login and password from the admin panel. What do i do?". It's easier to reset the settings in network device and re-create a new local network.

To reset the parameters of the router, just press and hold the button on the rear panel in this position for a few seconds.

In this case, the lights on the front panel of the device will go out for a while, and then work again. The button itself is located in a small hole to prevent accidental reset, and you can press it only with the help of an additional device, which can act as a match, needle, pin, etc.

Recovery methods

The router settings will be of no use if the user loses the access keys to the admin page, router, local network and the Internet. In this case, each of the access keys will be restored in a different way. The main methods are hardware and software.

The hardware access recovery method is associated with checking the parameters on the home page of the router, and the software method relies on the use of the software registry and special working applications that scan all information on the computer about the use of the network.

When restoring hardware to the network, at least a login and password to the administrative page is required, on which all the parameters and settings of the local network and Internet connection are formed. To enter the administrator's page, you need to type the manufacturer's ip-address in the address bar of the Internet browser.

The IP address can be found on a sticker on the bottom of the router.

If there is none, then the home addresses of the routers look like this:

1. D-link 192.168.0.1
2. Zyxel 192.168.1.1
3. Asus 192.168.1.1
4. Netgear 192.168.1.1
5. TPlink 192.168.1.1

After entering the corresponding address of the router, the user will be presented with an interface with many settings and network parameters. In order to find out the data on the local network, you need to enter the "local network" tab. Also, this tab can be called a wi-fi network or have names similar in meaning.

After that, the user should find the "wpa key" parameter. Opposite it will be located the password to access the router.

Password, access to the router - that's not all. In addition to the key for entering the local network, you may also need login data for the provider's domain. This data is also specified in the settings of the network device.

To do this, after fixing the data on access to the local network, you need to go to the "Internet" tab, where not only the parameters and connection technology will be indicated, but also the data on entering the Internet.

Most often, the login and password are located next to the line "setting account”Or“ connection setup ”.

Restoration by utility (program)

except hardware way elimination of the problem of loss of identification data when entering the Internet and a local network, there is also a software one. It is used by professional users and is not suitable for beginners. Thus, the participation of a second user with a higher level of knowledge in this area will be required.

With the programmatic method, the following working applications are used to help restore the necessary data by logins and access passwords:

1. Dialupass;
2. Remote Desktop PassView;
3. RouterPassView;
4. WirelessKeyView;
5. Wireless Password Recovery.

And this is not the whole list. By themselves, these programs are amateur developments, and not the result of the work of professional teams, so the interface of these programs is not always convenient and understandable for a beginner. But if the user nevertheless decided on independent actions, then he needs to be prepared for the fact that most links to such working applications may contain malicious software.

Throughout the entire operation of the profile program for searching and detecting the login and password from the network, an antivirus with the maximum possible set of functions must work on the computer in order to prevent infection of its personal computer and damage or theft of personal data.

The operation of such programs is based on the basic principles of the operation of the operating system, which, in turn, records every step of the user in the electronic information space. At the same time, a register is formed that describes all the actions taken recently. They will be stored as encrypted files until all memory on the hard drive is full.

It is impossible to open these files without special knowledge and professional skills.... Not a single program known to many users will be able to read them and display the necessary information on the computer screen. In this case, we need special applications to help uncover encrypted logins and passwords.

After the appropriate use of the program, the owner of the PC will be able to independently use both the local and the Internet network. But at the same time, we must not forget that all access keys to the networks must be saved in mandatory both in the form of a regular file with printed text, and in writing, so as not to experience significant difficulties in connection in the future.

Video: installing and configuring a Wi-Fi router

To prevent the loss of data for access to the local network and the Internet, novice users are advised to take the following steps:

1. during configuration and installation of drivers on network equipment, the program will offer to save a file with backup data for access on the PC desktop;
2. after creating with the network access data, the file must be copied to removable media and another copy made in any other folder;
3. after copying the files, you must manually write down on paper all the necessary logins and passwords from the network.

In addition, do not forget that the keys are also freely available for viewing from the computer of the user configuring the router. This data can be seen in the properties of the network. To do this, you need to find the network connection icon on the taskbar on the desktop in the lower right corner.

Then move the cursor to the name home network and press the right button. When a new window appears, select the "properties" option and in the next new window you can already see all the necessary keys.

Using these tips will reduce the likelihood of total loss. necessary information for the local Internet network.

Question answer:

How do I view the Wi-Fi password in Windows?

To view the password for accessing the wireless LAN in Windows, you must: