Configuring a working group in Windows 7. How to create a working group in a computer network

The order for the creation of the Working Group is written in cases where the task of choosing several employees is faced with the organization's director for solving any important current issue.

Any problem working group solves much more promptly and better than if one specialist worked on her. Moreover, sometimes there are situations in which employees of the enterprise to achieve common goals should be acting together.

Files

Reasons for the compilation of the order

The circumstances under which the organization arises the need to draw up an order to create a working group, may arise a lot. For example, the working group may be needed for:

creating local regulatory documentation;
work on some projects;
estimates of products manufactured;
checks of equipment and equipment, etc.

Who include in the group

The leadership and administration of each enterprise independently decide how many people and whom it is to include in the composition of a working group - in principle, it all depends on what kind of problems this employees will work together.

We only note that each of them performs a strictly reserved role, which means that all people entering the working group should have sufficient qualifications, certain education and experience. In addition, they should be able to interact with each other, despite personal sympathies and antipathy, as they carry full solidarity responsibility for the results of their work.

The working group is allowed to include not only the staff of the organization (as a rule, from different divisions), but also of third-party experts (especially, if we are talking about some complex technological processes, equipment, technician, etc.).

Who constitutes order

Since any order is always formed on behalf of the head of the enterprise, the direct responsibility for writing it is usually assigned to the secretary, legal adviser or other an employee close to the director who has an idea of \u200b\u200bhow to write managerial documents.

Regardless of the one who is busy in the formation of an order, it is important to comply with the legitimacy to comply with only one key requirement: after compiling it in obligatory It was certified by the director.

Document General Information

If you have a need to make a procedure for creating a working group, read our advice and see the sample document below.

To begin with, we will give general information about the order. Now there is no unified standard for the preparation of administrative papers, so that any such document employees of companies can write in a free form, or, if the organization has a developed and approved form of an order - according to its sample.

Forming an order, guide several simple rules.

Each order (and this including) should have a substantiation that is always written at the beginning of the document, after the words "in connection with ...". It gives an idea of \u200b\u200bthe circumstances that caused the reason for the compilation of the order. In addition, the base fit into the form - i.e. Link to the article and the point of the law, which gives the right to write this document.
The order is allowed to write on an ordinary sheet of any convenient format (most often A4 applies) or on the company's branded letterhead (as a rule, in cases where such a requirement is indicated in the regulatory acts of the company).
You can write an order from hand (the main thing is that everything is written clearly, picking up, without errors and corrections) or dial on the computer.
The document is drawn up in a single copy, which is signed by the Director (or an employee authorized to act on his behalf), as well as all the other persons mentioned in it. All autographs should be only "alive", i.e. Facsimile (printed) signatures in the form cannot be used.
Put on the order printing it is necessary only when the rule on the use of stamped products for visiting papers is fixed in accounting policies Organizations. After drawing up, the order is recorded in the journal of accounting of the administrative documentation (it must be in each company).

Sample order of creating a working group

In the "Cap" document writes:

its name (with a short meaning of meaning);
number assigned to internal document flow;
company name;
date, place of formation of the order.

Then below is the main part in which it is indicated:

justification, i.e. For what objective reasons you need to compile this order;
the composition of the working group - posts, name-name-names of employees, is allocated among them the main (chairman and member of the group);
specific goals and objectives to be solved by the Working Group;
if necessary, put a clear duration to perform responsibilities assigned to the working group.

In conclusion, a person should be entered into the execution of the order (this may be the director or any of his deputy, head of the structural unit, chairman of the working group).

Storage of document

After the order is written and decorated, as it should be found, and all interested persons familiarize themselves with him, it must be transferred to the secretary of the organization or another employee who is responsible for the preservation of the administrative papers. During the entire period, the order should lie in a separate folder along with other such documents, in the office, access to which for foreign people is limited.

After the shelf life of the order is over, it can be transferred to the archive of the enterprise and subsequently destroy in accordance with the procedure established by law.

Setting LOCK home network can be divided into a few steps:
1 We are prescribed network settings On all computers / laptops / televisions of the home network (this step is used in the absence of a router in your local network).
2 Check the name of the computers and the working group registered in the properties of computers.
3 Enabling Windows Firewall.
4 Network Verification.

We register manually network settings on all home network devices (for networks in which there is no router / router)

We go to the control panel (" Starting panel Control") And choose" Network and Shared Access Control Center».

After that, click " Change adapter settings».

In the window network connections, choose the connection of interest to us and click on it the right mouse button, choose " Properties", In the connection properties window, choose" Internet Protocol version 4 (TCP / IPv4)"And press the active button" Properties" In the Internet Protocol Properties window, version 4 (TCP / IPv4) register an IP address 192.168.1.1 (we prescribe the rest of the machines 192.168.1.2 , 192.168.1.3 etc.) The subnet mask in all computers must be 255.255.255.0 . The gateway should not match the IP address of the computer, in the gateway, write the IP of another network computer (if you do not specify the gateway, you will not be able to specify the network, you will have a public one by default, this will be discussed below).

When you first connect to the network, you must select network accommodation. From this selection, the configuration of the firewall and security settings for the type of network, which is connected to. If the computer connects to multiple networks (for example, a home network, a network in a local cafe or at work), the network location selection ensures the necessary level of security for the computer.

There are four types of network accommodation.
home network To work in home networks or networks, users and devices of which are known and they can be trusted. Home network computers can belong to a home group. For home networks, the network is turned on, which ensures the use of other computers and devices connected to the network, and also allows other users to access the computer from the network.
Working network To work in a small office network or other workplace. Network Detection, which provides the use of other computers and devices connected to the network, and also allows other users to access the computer from the network, is enabled by default, but it is impossible to create a home group or join it.
Public Network For networks in public places (such as cafes and airports). This network location is configured to make the computer "invisible" for other users and increase its protection against malicious software from the Internet. The home group is not available in public networks, and the network detection is disabled. This option should also be selected if direct Internet connection is used without a router or a mobile high-speed connection.
Domain Used for domain networks, such as those used in workplaces in organizations. Network placement of this type controls the network administrator and cannot be selected or changed.
In practice, I would recommend to choose a home network Working networkSince unlike home network, there is no need to enter a password to provide general access to resources. Of course, the public network for a local network at home is not worth choosing, I'm generally silent about domain, because in this case you need to install, configure the domain controller for the home network is not worth it.

Check the name of the computers and the working group.

It is necessary to check that all devices in the home network entered one workgroup, while have different names. For this come in " Start-panel control system " This procedure must be performed on all computers / laptops of the network.

In the Computer Name field, the domain name and the working group parameters, we look at the written computer name and the working group.

Checking the Windows Firewall Service.

The next step should check whether the Windows Firewall service is enabled. For this come in " Starting control panel- administration»

In the window that opens, click " Computer Management».

Next, come Services and application services", Find the service there Windows Firewall and see what it would be enabled if it is disabled, you need to run it and check that in the type of launch it was exhibited " Automatically"For this, you press the double-click on this service and see the window that opens, and if you want to correct the start type.

Checking the network.

The last step is to check the work of the home network, for this, on one of the computers, run the command line. Press " Start»Whether writing in the search bar cmd. and press the " ENTER».

Opens command line, it is necessary to enter the command ping. and the iP address of another computer home network, press the " ENTER».

If everything is done successfully, you should not have packet losses.

On this home network setting, you can be finished, the next step can be configured network printer Or do folders for shared access (network folders) This will be discussed in the following articles.

Hello, friends! In this article we will touch on the network setting in operating system Windows 7. Namely we will deal with home groups. This feature in allows you to simplify the exchange of information between users in the home network. Here we will analyze the setting of IP addresses for computers, so that you can create a home group and setting up network location. Let's see how to create home groups, how to join them and naturally how to make sharing directories, so that other users could work with them. We also consider the place from where it is convenient to control the shared resources on. I hope, after reading this article, you can easily configure the home network between computers with Windows 7.

FirstlySo that computers working properly on the network need to synchronize the time between them. On all network computers necessary exhibit rective time And to do so it would be.

Secondly. You must specify computers that they were on the same network. This feature is usually assigned to a router or router. Then it assigns an address from the specified range to each connected computer. If you do not have, then you need to configure the addresses manually.

This is done as follows

1. In the notification area, click the left button on the icon Net. In the window that opens, click on the link Network and General Management Centeraccess

In the network and shared access control center opened in the left side of the Click

In the window that opens, all network connections of yours are displayed. Choose, then connecting through which you will connect to the home network. It can be a software connection wireless network Or another. Select it with the left mouse button and call context menu Right-click. Choose Properties

In the window that opens, we need to be ticked client for Microsoft networks, file access and Microsoft network printers and Internet Protocol version 4 (TCP / IPv4). Choose the last and press the button Properties

In TCP / IP properties, choose Use the following IP address. In the field, enter the address and mask of the subnet (for example, such as in the image of IP - 192.168.0.1 and the subnet mask - 255.255.255.0)

In the window that opens, install a tick Get the latest troubleshooting tools

In Microsoft, a bunch of people work, whatever we can correct typical errors with this fund.

Now, if troubleshooting occurs, not only with the home group, you can use the most recent facilities.

The home group is created, the settings are specified. Now you need to connect the remaining computers on the network.

On the computer that we want to connect to the home group, this element

Since the group has already been created to us will be offered Join

We ask the libraries that we want to make publicly available and click Further

In the next window we enter a password To the home group and click Further

Successfully connected to a home group. In the same way, plug in all other computers.

Setting up shared access

All that was higher is preparatory actions for ease and ease of setting up shared network access.

Give common access to users home group can be as follows. Open. Find I. we highlight the folder To which we need to give access. In the toolbar, press the button General access and from the drop-down menu choose Home Group (reading) or Home Group (reading and writing) If you wish that users could change and delete files in this folder

Here you can disable access Semit Nobody from users. In this case, the folder icon will be marked with a lock

When creating or connecting to a home group in the field of transitions, the Explorer appears the corresponding section. From here it is convenient to access the shared folders of other network computers

After some time, you can forget which folders on your computer are in general access. To remember, you can go through the network to your computer. It is convenient to do with using the network item in the transition menu.

You can see, but it's not convenient to manage from here. There is a separate tool for this.

Run the utility Computer Management

In the window, computer controls, left in the console tree reveal the item Common folders and choose Shared resources. The table in the center will be displayed all your shared resources and here you can stop sharing any of them.

From the General Resources section you can open access. To do this, reveal the menu Act and choose New Shared Resource ...

Wizard Create Shared Resources Following the instructions of which you solve the folder

By default, general access to the libraries is only given for reading. You can access and write from the conductor. Select the desired library in the field of explodge transitions, call the context menu and select the sharing and home group (reading and writing)

This is the simple way to open and prohibit access to your computer resources in the Windows 7 home group.

Conclusion

In this article I hope was able to explain how it is done setting windows networks 7 . We set up computers to work on the same network, created a home group and learned how to give and close access to various computer resources. In principle, this should be enough. It remains only to add several recommendations to ensure greater security when working on the network.

Working groups - an effective task solving tool that require the coordinated action of employees of various divisions. However, in order to fully implement the potential of the Working Group, it is necessary to approach the decision related to its organization and coordination with particular attention to solving issues related to its organization and coordination.

As part of this article, the main problems will be considered, and approaches to overcome them, with which the author had to face in the process of organizing a number of working groups. The statement of the material will be illustrated a real example Creation and maintenance of a working group organized to reduce time loss when transition from one type of product to another.

Formulation of the problem

The creation of working groups is justified in two cases:

When there is a problem, the solution of which is outside the competence of individual workers or managers;

When it is required to find a method for a fundamental improvement in activities that serves as an inhibitory factor on the development of the company.

And in that and in another case, the group should clearly imagine the task that it has to be solved. If the working group is created to solve a more abstract problem, for example, increasing productivity or reduce production costs, then its activity is likely to be not too efficient. The reason for this lies in the weak ability of people to combine their efforts to achieve abstract purposes. At the same time, everyone understands the need for change, but not only a few aware of their role in achieving the result.

At the same time, to put in front of the group a particular purpose, for example, to reduce equipment downtime by 30%, will also not be true. Thus, it is possible to significantly reduce the motivation of the group participants to the search the best solution. They make up the feeling that someone already knows the ability to improve. In such a situation, an invalid desire arises to adjust the decision on the result.

We should not forget that the main purpose of the group is to find causal mechanismsthat lead to the emergence of the problem. The development of measures to eliminate identified reasons is only the second stage of the Group's work, which can generally be delegated to specific production processes or divisions. Thus, the group is sufficiently understanding that the problem exists and can be clearly described. For example, losses due to the release of inappropriate products amount to more than 1 million rubles per month. In this case, the next task may be set to the group: find the reasons leading to the emergence of marriage and offer measures to eliminate them.

Definition of the composition of working groups

Preparation of the organization of the Working Group should begin with the definition of its participants. Who should enter the group? To answer this question, a preliminary analysis of the problem will be solved by the Working Group.

First, it is necessary to determine the circle of employees for whom the solution to this problem is most relevant. Best option There will be an attraction of workers who will receive real, measurable benefits in the decision: relief of working conditions, safety or productivity, increase wages etc. The presence of such incentives significantly improves the effectiveness of solving the problem. If direct motivational factors seem to be able to find, it is necessary to consider creating artificial motivation for group members. For example, establish an award for solving the tasks set, and the size of premium payments to add dependent on the economic benefit received. Immediately I want to make a reservation that artificial motivation factors are better to use as an addition to natural incentives that serve as a stronger motivation to solve the problem.

Secondly, it is necessary to determine the required level of competence of the members of the Group. This means that the latter should clearly imagine the essence of the problem and the negative consequences that are connected with it. Members of the group must be potentially able to overcome the difficulties associated with solving the problem, that is, possess the necessary knowledge and methodological base. It should be understood that the level of competence depends on the role performed by a specific member of the Group. The group may include both managers of various levels and simple workers. Naturally, the competence of those and others can differ significantly. It is only important that it is enough to fulfill the tasks that will be assigned to the employee under the Working Group. However, all members of the Group must have basic knowledge relating to the well-known methods of eliminating the problem. To this end, it is extremely desirable to conduct general training with the relevant methods of all members of the group.

Third, the powers of the group members should have enough to make the necessary organizational decisions. Speech, of course, does not mean to include in the group general DirectorIf the group's results need to publish an order. But it should be understood that usually the functioning of the group is associated with changes in the regulations of personnel actions, implementation additional work According to control, the collection of statistical information, etc. In this regard, members of the group should be able to promptly affect the executive staff.

Regulation of the work of the Working Group

In the process of creating a working group, you must always remember that for members of the group, operations within its framework is an additional load that requires additional costs of time and strength. And how difficult it is to resist the temptation to threaten to participate in the group, referring to strong employment! To avoid a destructive version of the development of events, it is necessary to collectively accept such an order of the Group's activities that would suit all its members.

When creating a regulatory document, attention should be paid to a number of important organizational moments.

1. The place and time of the meetings of the Working Group. The ideal for meetings will be the choice of neutral territory, for example, a meeting room, a meeting room, a school class, etc. In this case, it is easier to overcome the psychological barrier that exists between the heads and subordinates in the daily work environment. But the use of the Cabinet for the Cabinet of any chief, on the contrary, will lead to a more cramped atmosphere. Place for meetings It is desirable to equip the minimum set of accessories for visual exchange of information and its registration. It is desirable to have a set of markers and a cross clipboard. In this case, there will be no problems with the consecration of the essence of the discussion to all members of the Group, and in the drawings it will be possible to restore the course of discussion later. The working group meetings should be carried out periodically. The time interval between meetings should be reasonably set in such a way that on one side the course of the discussion does not erase from the memory of the members of the group, and on the other hand, during the meetings, it was possible to make certain moves in the implementation of decisions adopted at the meeting. Of course, the ideal option is to maintain the protocol meetings of the Group, but, as practice shows, the efforts spent on this are not paying off by the benefit. As a rule, the protocols made throughout the form of anyone are not needed, and the working materials are quite enough to track the course of the discussion. Therefore, it is best to establish the place of storage of working materials and return to them as needed. As for the frequency of meetings, it is most advisable to collect them once a week. The best days for this is Tuesday, Wednesday. In this case, the serious start of the week is behind, but there is still enough time, to implement solutions to the Working Group on Hot Fiction. It will not be superfluous to be appointed an employee responsible for the decision of organizational issues: the alert of the participants of the group, the transfer, if necessary, meetings, registration of documentation, and so on.

2. The format of the activities of the Working Group. It should be aware that the effectiveness of the Working Group is determined not only by compliance with the Rules of Meetings. The main activity of the Group is the activities of its members beyond the meetings. These are activities to approbate new approaches to the organization of labor, the collection and processing activities, activities to study the methodological aspects of the problem. In order for it to be not allowed on samone, it is also necessary to regulate. The regulation may provide for the following procedure. At the end of the next meeting, each member of the group receives its task that must be fulfilled to the next meeting. At the meeting, first of all, the analysis of the tasks assigned. If one task requires a longer period of implementation, then the member of the group received it should report on the progress of its implementation. Further, the exchange of views on the effectiveness of the measures taken and the effectiveness of achieving the goal is estimated, in general. As a result, a new task unit is formed for group members. For the subsequent analysis of the effectiveness of the working group, it is convenient to maintain a table reflecting the tasks set before each group member and the degree of their implementation.

3. Control by senior management. The results of the working group should be regularly reported by the management of the enterprise (if the head is not a member of the group). It is not necessary to do as often as meetings. It is enough to make a brief report once a month to which you can attach a table of solved tasks. The head of the enterprise is very important to have an idea of \u200b\u200bthe current results of the Group's activities and the contribution of each member to this result. If there is a disproportionality of the participation of the members of the Group in its work, then measures should be taken to eliminate it. Also, if the work of the group is not effective due to the problems of an organizational nature, measures should be taken to eliminate such problems.

An example of the organization of the Working Group

As an example, consider the approach to the organization of the Working Group to reduce transition time between different types of products. As an object of management, we consider an enterprise that produces several different types of products on the same production line. The production line consists of 3-sections. When moving from one type of products to another, the operating of the equipment occurs on each site.

The purpose of the Group's work is to reduce the time spent on transitions between different types of products.

The following participants are included in the Working Group.

Senior Sales Manager. Its participation is due to the fact that references are related to the need to meet consumer demand for various types of products. Applications for the production of these types of products is formed by the Sales Department. The most competent, in the details of the formation of applications, the senior manager of the department is submitted.

Engineer (economist) on production planning. It is a key figure forming production tasks, as well as a production schedule based on application applications.

Masters of production sites (3 people). They are responsible for the stable work of the relevant production sites, including for the work on targeting equipment.

Primary motivational factors for these employees are: an increase in the amount of orders made, systematization of planning activities, an increase in labor productivity, reducing the cost of products. As an additional motivation to the members of the Group, a fixed part of the award was established for reducing average target time for every 15%.

On the 1st meeting of the group The following questions were considered.

The purpose of the Group's work is formulated - reducing the specific time of transitions between different types of products by 50%.

The principle of calculating the target indicator is defined as the ratio of the total time spent on transitions to the operation time of the production workshop.

Defined the rules of the Group's work. Meetings 1 time per week, every Wednesday at 15 o'clock in the meeting room. Appointed responsible for organizational issues.

The main directions of activity to reduce the specific time of transitions are identified: the formation of blocks of applications for the production of products of one species, optimal choice The sequence of the production of formed bodies blocks, acceleration of equipment reference.

Tasks are defined for group members. Senior Sales Manager To analyze orders received from customers for the previous month. Evaluate the ability to combine applications in blocks by types of products. Estimate the potential winnings in the number of transitions last month. Organize timing of the duration of transitions between different types of products on their sites. Production Planning Engineer Develop a convenient form of registration of time reader data duration and ensure the collection and processing of filled forms, as well as the calculation of the current value of the target. Preliminary processing results prepare for the next meeting.

On the 2nd Meeting of the Group

According to the senior manager, it is possible to potential reduction in the specific time of transitions in blocking placement of production orders by 2 times due to a decrease in the number of transitions, but the time of execution of orders does not allow randomly to combine products into blocks. Taking into account the unification in blocks only orders close to the execution timing, a possible gain is 10%. However, it is necessary to get the clients to place their orders for 2-3 days earlier.

Masters of production sites began to conduct timbering of technological transitions. The collected information is not enough to analyze statistical data on the duration of transitions between specific types of products, but the planning engineer found out that the transitions between some types of products take longer than between others. Prerequisites were also received on the current specific duration of transitions. In the process of timing, it turned out that the transition time in section No. 3 is 5 times less than in sites No. 1 and No. 2, and the transition in section No. 2 becomes possible only after the end of the transition in section No. 1.

Senior manager Find out the potential readiness of customers to report orders for 2-3 days earlier. Masters of production plots Determine the potential possibility of separate reference of the equipment at sections No. 1 and No. 2, as well as to continue the collection of statistical information. Planning engineer Suggest a method for determining the optimal sequence of placement of orders for production, taking into account the minimum total duration of reference.

On the 3rd meeting of the group The following questions were discussed.

The senior manager found out that up to 30% of regular customers are ready to report their orders in advance. Another 20% of customers are ready to provide their long-term plans to place orders. Potential winnings in the specific period of reference time is about 8.5%. Masters of production sites found out that the separation reference of the equipment of the plots No. 1 and No. 2 is not possible due to the need to adjust the equipment of the site No. 2 on the basis of the overlaid indicators of the plot number 1. However, it is possible to pre-roughly adjust the equipment of the site No. 2 based on the collection of statistical information on the parameters of the site No. 1. The potential gain can be up to 25%. Planning engineer proposed table form Submission of statistical information about the transitions, the use of which during the placement of applications for production will determine the optimal sequence of production, but it will require additional statistical information to be filled.

As a result of the discussion, the following tasks were identified. Senior manager The distribution department is to develop an algorithm for the formation of bodies of applications coming from various managers in order to centralized transmission to production. Masters of production plots Continue collecting information about the duration of the reference and organize the collection of information about the settings of the equipment of the site No. 2, depending on the parameters of the equipment of the plot number 1. Planning engineer Prepare the transition table for use when planning applications for production. Processing statistical information of installation equipment installations No. 2.

On the 4th Meeting of the Group The following questions were discussed.

The algorithm proposed by the senior manager requires the joint activities of the Sales and planning department. There is a need for regulating the activities of this kind. Masters of production sites confirmed the possibility of using statistical information for the pre-coarse setting of equipment of the plot number 2. Planning engineer prepared statistical information reference books to determine the optimal sequence of reference and pre-coarse equipment settings, section No. 2.

As a result of the discussion, the following tasks were identified. The senior manager, together with the planning engineer, to prepare the charter of joint activities to determine the optimal sequence of placing orders in production based on the received statistical information. Masters of production sites Prepare the regulations for the preliminary settings of the parameters of the site No. 2 based on statistical data on the parameters of line No. 1.

I will not continue the description of the Group's activities further. Moreover, the innovative part of the activity will end. Next will be followed by the development and coordination-approval of documents, staff training, activities to introduce regulations, numerous improvements, etc. Word, all what is called "Tea". This example, I only wanted to illustrate the idea of \u200b\u200bcreating a full-fledged, efficient working group, in which everyone feels responsible for the success of a common cause.

Conclusion

I would like to repeat once again that, with the right organization, working groups are a powerful tool for improving production relations. The special importance of working groups have in the introduction of leaning tools. In this case, the organization of working groups is the first step towards universal involvement of personnel, a kind of mechanism of informing the idea to the broad masses of employees of the enterprise. A weighted approach to the process of creating and coordinating the activities of groups is a guarantee of the full introduction of any innovations in your enterprise.

Those basic principles that were considered in the article do not in any way claim complete or absolute objectivity, but they may well serve as a starting point for the formation of your own approach to the subject matter.

Articles or other materials used for you useful? Site authors and all community members will be very grateful if you support the project in any, accessible and convenient for you. . Supporting the portal you will help increase the popularity of the resource and attracting more broad Circle Visitors to solving the problems considered on the site.

When quoting the materials of the article necessarily indicate a reference to the source. Full reprint of the text of the article is possible only with the permission of the author.

13. In order to prepare draft laws included in the government's draft law, as a rule, working groups are formed (hereinafter referred to as the Working Group). The list of bills on which the working groups should be formed are approved by the Commission.

14. The Working Party is formed in order to develop a bill, agreeing with interested federal executive bodies and organizations, participation in consideration by the draft law by the Chambers of the Federal Assembly (including expert-legal support), development of draft regulatory legal acts of the President Russian Federation, Governments and federal executive bodies subject to adoption in connection with this draft law (hereinafter - the regulatory legal acts necessary for the implementation of the relevant federal Law), as well as the development of proposals for its improvement.

15. The working group includes representatives of the federal executive authority or the organization - a heading contract for the draft law, other interested federal executive bodies (compulsory - deputy heads of interested federal executive bodies and organizations and (or) heads of structural divisions of federal executive bodies The authorities and organizations responsible for the appropriate activity), if necessary, representatives of the chambers of the Federal Assembly and their devices, employees of the government office, executive authorities of the constituent entities of the Russian Federation, other government agencies, as well as representatives of research, public and other organizations.

16. Consistent with interested federal executive authorities and organizations proposals on the composition of the working group are submitted to the commission by the head of the federal executive body or the organization - the head of the draft law or State Secretary - Deputy Head of this federal executive authority within 30 days from the date of approval List of bills for which working groups are formed.

Decisions on the formation of the Working Group and the approval of its composition are accepted at the Commission meeting.

The Working Group is headed by Deputy Head of the Federal Body of Executive Authorities or an organization - a heading performer on the draft law. The head of the Working Group approves the procedure and work plan of the Working Group and is personally responsible for the timely preparation of the draft law.

According to the written submission of the head of the Working Group, members of the Working Group - civil servants of the federal executive bodies in coordination with the leader (deputy head) of the relevant federal executive authority are exempt from the implementation of other official duties at the service site for the period defined in accordance with the work plan of the Working Group.

17. Working Group:

a) ensures the preparation of the draft law;

b) promotes the coordination of the draft law in the prescribed manner with interested government agencies;

c) initiates at any stage of preparing the bill to consider his consideration from the head of the federal executive body or the organization - the head performer on the draft law, the Deputy Chairman of the Government (in accordance with the distribution of obligations) in order to resolve the disagreements arising in the process of activity of the Working Group, as well as decision-making conceptual nature;

d) represents the bill at the meetings of the Commission and the Government;

e) ensures the expert and legal support of the draft law with its chambers of the Federal Assembly, including at the plenary sessions of the Chambers of the Federal Assembly, adopts in accordance with the established procedure to participate in the work of the Committees and Commissions Chambers of the Federal Assembly and in other chambers of the Federal Assembly of Events related to consideration of the draft law prepared by the Working Group;

e) participates in the development of the government's position on the amendments proposed by the subjects of the law of the legislative initiative at the stage of preparation of the draft law to consideration by the State Duma in the second reading;

g) participates in the preparation of projects of federal laws subject to adoption in connection with this draft law;

h) participates in the preparation of draft regulatory legal acts necessary for the implementation of the relevant federal law;

and) develops proposals for improving the provisions of the Federal Law, the preparation of the project of which it carried out;

k) participates in consideration of the draft laws on the amendments to the Federal Law, the preparation of the project of which it carried out;

l) presents progress reports on the preparation of the draft law, as well as draft regulatory legal acts necessary for the implementation of the relevant federal law.

18. The members of the Working Group are indicated as developers on the title page of the draft law.

19. The Working Group ensures the preparation of the draft law and other materials in accordance with the Rules of the Government of the Russian Federation.

In order to ensure the timeliness of the adoption of the regulatory legal acts necessary for the implementation of the Federal Law, the Working Group provides for such acts in the list of preparation of their projects, taking into account the alleged time of entry into force of the relevant Federal Law.