How to improve the work of Touch ID on your iPhone? Touch ID: What is it on the iPhone.

Touch ID - so officially called a device for reading fingerprints that are equipped with smartphones iPhone. 5S, iPhone 6 and iPhone 6 Plus as well tablets iPad. MINI 3, ipad mini. 4, iPad Air. 2 and iPad Pro. Apple claims that iPhone models 6s and iPhone 6S Plus set Touch ID more new versionAnd on the forums, users claim that the Touch ID does not work as "old" and new.

Touch ID is a solution, of course, useful, despite not only from a marketing point of view, but also with a purely practical.

Users with it can unlock their iPhone and iPad, enter accounts in various online services and even pay for purchases through Apple Pay.

But only if the Touch ID works fine. But, unfortunately, like any other electronics, this also sometimes climbs. Therefore, let's understand.

To begin with, we note that if you have problems with the touch ID on your Apple-device, after a recent update of its operating system to iOS 9 and / or even more new versions, it is likely to need a downgrade (i.e. system rollback to previous version), Or, if the problems are not so critical, then it is better to wait for the next update.

With the other problems of the fingerprint scanner in iPhone-ah from 5S and the newer, as well as in the iPad-ah Mini 3, Mini 4, Pro and Air 2, you can try to figure out, so to speak, on your own and even at home. The benefit of such problems is not very much, and their elimination methods are already known. So, if:

Touch ID does not work - failure

If the Touch ID features, it is recommended to deal with this nuisance recommended by simple reconfiguration. In other words, you need to re-teach the iPhone (or iPad) to recognize your fingerprint. Since the appearance of Apple scanners, regularly updates them to the smartphones and tablets of users to remember "fingers" of their owners longer and better.

Radical optimization seems to have been held in iOS 8, but, as practice shows, if not refreshing the imprint, then with time (from month and longer), the Touch ID failure is somehow, but it happens. The reasons may be very different, but, as a rule, they have a purely cosmetic character: light "wear" of the imprint itself, dry skin dryness, etc.

Because if the Touch ID suddenly blinded, then to start, update the print in memory of the smartphone or tablet. But before you should carefully wipe the surface of the scanner and wash your hands. Next, go to " Settings ", Then - in" Touch ID and password ". Old prints We remove the swipe on the screen on the right left. After that tadaem " Add a stamp "And reinstall the standard input procedure in accordance with the instructions.

Touch ID does not work in the App Store

This is also a problem from the category noticeable. Most often the reason that the scanner stops working with the App Store is also a cosmetic factor, but often the problem is due to failure in the work of the software. Some users complain that with iOS 8.3 in the App Store Touch ID simply is simply displayed.

In such cases, we do the following:

• we click Settings » -> « Touch ID and password «;

• in chapter " Using Touch ID »Turn off" App Store iTunes Store. «;

• reboot iPhone (or iPad);

• returning to B again "Settings" -\u003e "Touch ID and Password" and turn on " App Store, iTunes Store «.

After that, the Touch ID bug in the App Store should sort out. We recall that if you didn't buy anything during 24 hours in the App Store, then the system will require a password.

Touch ID does not work at all

Of course, the likelihood that the imprint scanner has failed, also exists. Although users complain about such breakdowns relatively rarely. If, after updating the touch ID, I did not work properly, then you can try "hard reset" by creating a pre-backup. If the problem is programmed, the rigid reboot must eliminate it. Otherwise you have to visit service centerSince without qualified diagnostics, it is hardly possible to do.

Touch ID does not work in winter or in cold

Statistics says that in low temperatures, the imprint scanner in the iPhone and iPad is buggy more often. The problem, again, in most cases has a simple explanation. The fact is that in cold weather, the papillar pattern of the fingers is changing. It is difficult to notice the naked eye to notice these changes, but the touch ID notes them and begins to collect. As you already probably guessed, the trouble is treated, too, by updating the imprint. But you can also do it easier and introduce a special "winter" imprint to the device, i.e. Scan the pattern of the fingers immediately from the cold. True, they say that both methods only partially solve the problem, but it is still worth trying.

Touch ID does not work when dirty or wet

Well, explain here especially and nothing. It is clear that moisture or dirt (whether they are on the skin of the finger or on the scanner surface) very effectively impede the scanning of any imprint. Therefore, the scanner in case of excess substances of a wet and / or dirty species, it is better to wipe with a dry clean cloth. And the finger must be flushed (you can even with your hands). However, it is not worth overdoing with water, because if you keep your hands in the water for a long time, then the pillows will turn the finger pads and the papillary pattern will change. Apple assure that in new iPhone 6s and iPhone 6S Plus Touch ID better works with wet skin, but still the manufacturer does not recommend using a wet scanner.

As about technology, it is impossible not to raise the question of setting the fingerprint scanner on the iPhone and consider possible problems.

Let me remind you that Touch ID is a great way to use a fingerprint instead of the familiar four-digit password. One pressing the "Home" button is enough to unlock your iPhone, let's figure it out how to configure Touch ID.

How to configure Touch ID

Apple claims that Touch ID can recognize your finger at almost any angle. This is true, with the primary scan of your fingerprint, the phone will ask you to re-send your finger to the sensor for additional scanning from different slopes and angles.

1. To begin with, we need activate Touch IDWe go on the next way:
2. Settings - Basic - Touch ID and Password - Touch ID
3. After turning on the Touch ID, the iPhone will require you to enter a normal four-digit password, it is necessary in order to provide additional protection. For example, when adding fingerprints of other fingers.
4. Now it is necessary to carefully touch the "Home" buttons until you feel a little vibration. This action must be repeated as many times as needed. In this case, the fingerprint image will be gradually filled. It is important to do everything as if you use the iPhone in everyday life, that is, the most natural possible. Note that the finger and the button are dry.
5. At some point, the phone will ask you to touch the button at an angle to scan the edges of the finger pad.

It is worth noting that the more you will use the Touch ID, the better the technology will recognize your fingers. Total iPhone allows you to register up to five fingers (you need more time to recognize), by the way, some manage to register not only fingers ... Curious fact is that Touch ID will still understand you if suddenly you get a strong finger injury, which Violates the imprint. Touch ID anyway will require you to enter a four-digit password in the following cases:

• after rebooting the phone;
• for available in the "Touch ID and Password" section;
• after 48 hours from the moment the last unlocking.

What can I use Touch ID?

At this time, Apple is very scoop using Touch ID technology. With your fingerprint, you can only be content with the possibilities of unlocking iPhone and shopping in iTunes Store, App Store and iBooks Store. without entering a password.

By the way, the ability to purchase content in the above-mentioned stores can be disabled, for this you need to go to the next section of the menu:

Settings - Basic - Touch ID and Password - Touch ID

There is a corresponding toggle switch "iTunes Store, App Store".

But users can afford much more, such as the fingerprint protection to open certain folders or applications.

Touch ID does not work

If you are faced with problems when working with Tocuh IDs, the reasons can be very different. Apple recommends in such cases any banalcin - make sure that you have the last iOS version, the "Home" button does not make a mud, pay attention, whether the entire finger closes the sensor and everything in such a spirit ...

If all of the above does not have a place to be in your case, you can recommend trying to register your fingerprint.

Problem still exists? Your case is the most terrible. Apparently, you are faced with a production marriage Touch ID. Most often, this is accompanied by an error " When scanning there was a failure, go back and try again."When scanning a fingerprint scanning and if the iPhone restarts you did not help, then the phone needs to be included in the service center.

The most disgusting in such a problem is that sometimes the seller is to blame. The fact is that if there is marriage, unscrupulous sellers are collected from two iPhone one, and since the Touch ID sensor is associated with the native processor, they cannot find each other in the body of a single phone. This is just one of possible causes, you should not assume only it, but this option is quite possible.

What to do if Touch ID works badly

Often, users iPhone and iPad complain about bad work Touch ID. Moreover, difficulties with the recognition of fingerprints may occur even with a purified dirt and dust with a button and clean dry fingers.

Few people know, but the IOS is built in the program for adjusting data on the prints of your fingers. In other words, the accuracy of recognition Touch ID can be improved and it is quite simple:

• Go to: Settings - Main - Touch ID and Password - Touch ID;
• register a few fingerprints if you have not done this earlier;
• now in the main menu of Touch ID settings, just touch the Home button and you will see how the registered "finger" will be highlighted with gray;
• repeat this procedure several times regarding the sensor at different angles.

Thus, you will be able to "train" the Touch ID and it will not even be necessary to re-register your fingers.

If you did not find an answer to your question or something did not work out, and in the comment below there is no suitable solution, ask a question through our

Biometric sensor Touch ID For the first time appeared in apple devices in . A year later, he twisted in ,. Of the pleasant additions for owners flagship smartphone Fingerprint scanner has turned into a real tool to protect access not only to mobile device, but also separate applications, and also became an integral element payment system . Unfortunately, Touch ID still does not always work as intended and how users would like. Let's try it fix.

All the very profitable offer On iPhones (there is even 20 thousand cheaper than the market). Something change and even give free.

In May last year, the novel of Yuriev already told this topic in detail how to configure Touch ID so that then forget the failures of the sensor and enter the password manually for a long time. Unfortunately, with the time the algorithm for the work of the fingerprint scanner still begins to work with some "faders", which are subsequently only participating. For example, after switching to the iPhone 6, I was in full delighted with the updated Touch ID - it perfectly and clearly worked for more than a month, and then suddenly began to climb, and this happened every day more and more often.

The main thing is not to lower your hands, or in this case fingers. The problem is solved, and with undergraduate means and will not require a lot of your time. This method For the first time was described about a year ago, but for some reason passed by most thematic resources, although the method is really working, what I was convinced of my own experience.

So, to begin with, it is best to remove all prints and adjust them again, as described last year's. After that, restart the smartphone by completing the previously all applications. Maybe these steps and extra, but let them be for the purity of the experiment. Now we go to B. Settings -\u003e Touch ID and Password -\u003e Enter the password, if necessary and fall into the most menu where your fingerprints are stored.

Now - attention - no longer needed any manipulations and transitions, just touch the scanner So, how do you do it to unlock the device. Note when you delay the well-known finger system on the sensor, one of the prints in the list on the screen highlighted. This is a fingerprint of this finger, and you just conducted an additional scanning it, the results of which iOS saved somewhere in the system on the chip.

So hard happened training Touch IDThe biometric sensor receives additional pictures of your finger and can use them for unlocking. Spend five to seven minutes to do scan each of the stored fingersBy applying them to the button while in this menu. Each time one of the prints is highlighted - this means that the procedure has passed successfully. In the device's memory, additional scans of your finger will appear in the device, and the Touch ID will work much better, the triggering process will occur markedly faster.

Repeat again: each finger, in different ways, many times - the result will be noticeable immediately and will be saved in the daily use of Touch ID.

website Biometric Touch ID Code first appeared in Apple devices in iPhone 5S. A year later, he migrated to the iPhone 6 and iPhone 6 Plus, iPad Air 2 and iPad Mini 3. Of the pleasant additions for the owners of the flagship smartphone, the fingerprint scanner turned into a real tool to protect access not only to the mobile device itself, but also ...

Even the grandmother Petrovna knows: in the iPhone SE there is an alleged "bad" sensor Touch ID! Buying such a smartphone Well, no way, fail, "not a cake", all that.

it truth?

To start a fact: When assembling the iPhone SE, the sensor is used as the same model as in the iPhone 5S - the very first smartphone apple with reader prints. The iPhone 6 is the same model of the Touch ID, and in 6S - quickly fast.

Total 2 Generations of sensors, in iPhone SE, iPhone 6 and iPhone 5S worth exactly the first.

But the criticism at the same time is forgotten: not the "piece of iron" dies to the device, but how it really works. Next, see a short video.

Compare Speed \u200b\u200bTouch ID on iPhone SE, iPhone 5S and iPhone 6S

We checked repeatedly on different fingers, and also rebooted devices. The result does not change: iPhone 5S always "merges" iPhone SE and more than 6s. May lose for a whole second, maybe for a moment.

According to the logic of Internet soldiers between 5S and SE, there should be parity, but it was never happening.

Why is that? Our theory - the sensor is simply easier to breathe due good processor. The rest on the Apple conscience: who knows, maybe there are improvements and software? Who knows.

Output: The argument about the touch ID does not roll. On the iPhone SE, it is faster than 5s. And there is nothing more to add.

P.S.: The difference in the display of colors on the screens is a consequence of shooting in conditions of home lighting and white balance displayed by the "warm" from the displays. Our 6s and 5S screens with a bias in "yellow", so sorry.

website Spent a real test, removed the result on video. Judging by the comments to our review, even the grandmother Petrovna knows: in the iPhone SE there is an alleged "bad" sensor Touch ID! Buying such a smartphone Well, no way, fail, "not a cake", all that. It's true? To begin with the fact: when assembling an iPhone SE, the sensor is used as the same model as in the iPhone 5S ...

A new feature from the iPhone 5S called Touch ID, caused a considerable excitement around fans apple companies and their devices. However, now there are restrictions between users, because only owners can use the fingerprint scanner last iPhone 5s until the remaining users are forced to continue using the standard lock button. To date, the use of a fingerprint sensor is available only for Apple. The principles of the company are still folded in this way: they do not want to give access to new system Safety, as it can destroy all the idea. Now Touch ID can be used to unlock the device, authorization and purchases in two stores of the iTunes Store and the App Store.

Today, one of the developers of tweaks for jailbreak, came up with a novelty, which will charge some users and imitate the print scanner on any iPhone. All you need for this is the availability of iPhone on iOS 7 and the installed jailbreak with Evasi0N.

How to doTouchIdon anyiPhone.andiPad.:

1. Go to the main device settings, then go to password protection and install it. This is a mandatory operation that will be needed for the correct operation of the tweak.
2. Make sure the jailbreak is available if it is missing on your iPhone or iPad, then it is necessary to do it.
3. Open Cydia, download free tweak called Activator. If you do not want to look for it among the repository, then simply enter the tweak name in the Search tab.
4. After installing the tweak, click on the RESPRING button and open Cydia again. Now download and install a tweak called Bypass.
5. Close Cydia and return to the settings. Now the tweak tab of Activator will appear there.
6. Open the "On Lock Screen" section, then the Home button tab and fall into the short hold.
7. Install a tick next to BYPASS

This procedure is completed. Now try blocking and unlock your device. When unlocking, you will appear with a password window. However, if you hold one quarter of a second button Home.The device is automatically unlocked. As a result, we got such a funny and someone convenient feature. We hope that you liked this undertaking.