As in the new version of iTunes make Ringtone. Maximum ringtone size for iPhone

All iPhones, like any other mobile phones, are equipped with a set of standard melodies. But this is also reflected the essence of the concept of "standard" means they are in all. Of course, Ringtone can just buy by sending SMS with certain number. But there is another way out, more attractive: let's talk how to make a ringtone for iphone yourself.

How to make a ringtone for iPhone through iTunes.

Standard program iTunes is an unchanged satellite of all generations of iPhones. It is downloaded and installed at the stage of activation of the device. Therefore, for a start, just open it on the computer.

1. Find the item file in the menu.

2. Press the "Add to the library" button. Then add your favorite song from which we will make a ringtone.

3. Click right-click on the Information tab.

4. We find the "Parameters" tab, celebrate there "Start" and "Stop Time". The gap must define not more than 30 seconds. Click OK.

5. We click on the right button on the melodies, choose "convert to ass" - after this procedure under the original song, a segment of a melody will appear with a duration of 30 seconds with the same name.

6. We click on the right button and select "Show in Windows Exporer" from the window. The folder will open, there must be one file weighing about 500 KB, in M4A format. This format must be changed to M4R. Check that the file name is in English. The location of the file needs to be remembered.

7. Go back to iTunes to remove our segment of the melody from the music folder, close the program.

8. Open iTunes again, find a "file" - "add to the library". Choose our in the "ringtons".

9. We connect the iPhone, click on the Rington tab, select the desired melodies and click "Apply" or "Synchronize". If the created file is available in the library, and it is impossible to transfer it to his phone, then, most likely, the problem with the length of the track. Therefore, if the melody lasts more than 30 seconds, then it must be tried in short.

10. In the "Settings" tab - "Sounds" - "Melody" put our new ringtone for incoming calls (or for SMS, MMS, alarm closer - as a soul wishes).

How to make a ringtone for iPhone using special programs (Iringer, GarageBand)

Earlier to install your own melody, even purchased through iTunes Store. It was quite and very problematic. Third-party developers have gradually introduced their own programs that allowed the ringtones for the iPhone independently. And over time, the "apple" developers went on concessions. Starting with iTunes 7.5, you can easily record even the "left" ringtones on the phone, and the package for cutting the ilife melodies is provided by default on any poppy.

Dimak detail in detail how to make a ringtone for the iPhone on the example of using GarageBand from Ilife.

1. We start the program, select the "Rington" for iPhone "to appear" Example Ringtone "in the" Example Ringtone ".

2. The main window appears the finished ringtone created by GarageBand as a sample. Delete this example using Delete.

3. Tighten the song from which we will make a ringtone for the phone, in the GarageBand window.

Tip: Be sure to view the right-hand side of the program - there is a browser with excellent ready-made melodies and SMS signals.

4. Ringtone for iPhone should not sound longer than 40 seconds. In our program, the length of the track, which you will cut, shows the yellow strip immediately above the title. The magnitude of the strip can be increased or decreased.

5. When our ringtone is ready, select the "Export" tab and "Send Ringtone in iTunes", then synchronize our phone with Poppy.

How to make a ringtone for iphone 3gs

For all generations of iPhones, ringtones are made absolutely the same. Therefore, try to use one of the above methods.

Finally, I would like to say that manufacturers are now trying to simplify their development as much as possible, so do not be afraid that you do not have enough qualifications or knowledge in order to use them. The instructions that we suggested to you will be quite enough to try creating your own unique melody for iPhone. After all, it is so nice - to create a ringtone with your own hands and highlight the phone from a variety of others.

M4R format, which is the MP4 container in which the AAC audio stream is packaged, is used as ringtones in Apple iPhone.. Therefore, a rather popular direction of conversion is the conversion of a popular MP3 music format in M4R.

Convert mp3 in M4R, using the converter software installed on the computer or specialized online services. In this article, we will just talk about the applications of various applications for converting in the direction indicated above.

Method 1: Format Factory

A universal format converter can solve the task.

1. Activate factor format. In the main window in the list of format groups, select "Audio".



2. In the audio format list that appears, look for the name. "M4R". Click on it.



3. The M4R conversion setup window opens. Press "To add a file".



4. The object selection shell opens. Move where the MP3 is posted to be converted. Warming it, press "Open".



5. The name of the marked audio file will be displayed in the conversion window in M4R. To specify where exactly you should send a converted file with the M4R extension, opposite the field "End Folder" Click on item "Change".



6. The shell appears "Folder Review". Go to where the folder is where you want to send a converted audio file. Mark this directory and press Ok.



7. The address of the selected directory will appear in the area "End Folder". Most often the specified parameters are quite enough, but if you wish to produce more detailed settingClick "Tune".



8. Window opens "Sound Setup". Click in block "Profile" on the field with a drop-down list, in which the default value is set "Higher Quality".



9. Opened to select three options:
   • Higher quality;
   • Average;
   • Low.

   The more high quality It is selected that it is expressed in a higher bitrate and sampling frequency, the final audio file will take more space, and the conversion process will take a greater time period.



10. After choosing quality, press Ok.



11. Returning to the conversion window and specifying the parameters, click Ok.



12. Returns to the main factor format window. The list displays the mp3 conversion task in the M4R, which we added above. To activate the conversion, select it and press "Start".



13. The transformation procedure will begin, the progress of which will be displayed as percentage values \u200b\u200band is visually duplicated by a dynamic indicator.



14. Following the completion of the conversion in the row of the task in the column "Condition" The inscription will appear "Done".



15. You can find a converted audio file in the folder that previously pointed out to send the M4R object. To go to this directory, click on the green arrow in the row of the completed task.



16. Opens "Windows Explorer" It is in the directory where the transformed object is located.

Method 2: iTunes

W. apple companies There is an application, among the functions of which just a possibility of converting MP3 to the M4R ringtones.

1. Run iTunes. Before switching to conversion, you need to add an audio file in "Mediatka"If it was not added there earlier. To do this in the menu click "File" and select "Add file to a library ..." or apply Ctrl + O..



2. The add file appears. Move to the directory directory and mark the desired MP3 object. Press "Open".



3. Then go to the very "Mediatka". To do this, in the content selection field, which is located in the upper left corner of the program interface, select the value "Music". In block "Mediamatka" On the left side of the application shell click "Songs".



4. Opens "Mediamatka" With a list of songs added to her. Find the track in the list that you should convert. Further steps with editing the parameters of the file playback of the file It makes sense only if the resulting object in M4R format is planning to use the ringtone as it is iPhone devices. If you plan to use it for other purposes, then manipulation in the window "Intelligence"which will be discussed further to produce. So, click on the title of the track right mouse button ( PKM.). From the list, select "Intelligence".



5. The window is started "Intelligence". Move it into the tab "Parameters". Install the ticks opposite the items "Start" and "The end". The fact is that in iTunes devices, the ringtone should not exceed 39 seconds. Therefore, if the selected audio file is played more than the specified time, then in the fields "Start" and "The end" You need to specify the start and end time of the melody, counting from the start of the file launch. Start time You can specify any, but the segment between the beginning and the end should not exceed 39 seconds. After executing this setting, press Ok.



6. After that, the return to the track list is again. Again highlight the desired track, and then click "File". Choose in the list "Convert". In the additional list click on "Create a version in AAC format".



7. The conversion procedure is performed.



8. After converting completed, click PKM. By the title of the transformed file. In the list notes "Show B. Windows Explorer» .



9. Opens "Conductor"where the object is placed. But if you have in operating system Enabled expansion shows, you will see that the file has no M4R extension, but M4A. If you do not enable extensions, it should be activated to make sure to make sure the above fact and change the required parameter. The fact is that the expansion of M4A and M4R is essentially the same format, but only the target destination they have different. In the first case, this is the standard iPhone musical extension, and in the second - specially intended for ringtones. That is, we are just enough to manually rename the file by changing its expansion.

   Click PKM. According to the audio file with the expansion of M4A. Choose in the list "Rename".



10. After that, the name of the file will be active. Highlight the expansion name in it. "M4A" and enter instead of it "M4R". Then click ENTER.



11. A dialog box opens in which there will be a warning that when changing the extension, the file may be inaccessible. Confirm your actions by clicking "Yes".



12. Converting an audio file in M4R fully completed.

Method 3: Any Video Converter

The next converter that will help solve the described question is. As in the previous case, it will be possible to convert a file from MP3 to M4A, and then manually change the extension on the M4R.

1. Run Ani video converter. In the window that opens, click on the button "Add video". Let this name be confused by this name, since this way you can add audio files.



2. Opening a shell of adding. Move it to it where the audio file MP3 is posted, highlight it and press it. "Open".



3. The name of the audio file will be shown mainly by the Ani video converter. Now you should set the format to which conversion will be made. Click on the area "Select output profile".



4. Launches list of formats. In the left part of it, click the icon "Audio Files" in the form of a musical note. A list of audio formats opens. Click in "MPEG-4 Audio (* .m4a)".



5. After that, go to the settings block « Basic installations» . To set a directory where the converted object is shifted, click the icon in the folder form to the right of the area "Output Catalog". Of course, if you do not want the file to be saved in the default directory, which is displayed in the field "Output Catalog".



6. Already familiar to us to work with one of the previous programs tool "Folder Review". Highlight the directory in it, where you wish to send an object after conversion.



7. Next, everything is in the same block "Basic Settings" You can set the quality of the output audio file. To do this, click on the field "Quality" And select one of the presented options:
   • Low;
   • Normal;
   • High.

   It also acts the principle: the higher the quality, the larger the file, the file and the conversion process will take a larger length of time.



8. If you want to set more accurate settings, then click on the name of the block "Audio parameters".

   

   Here you can choose a specific audio codec ( aAC_LOW., aAC_Main., aAC_LTP.), Specify the value of the bitrate (from 32 to 320), the sampling rate (from 8000 to 48000), the number of audio channels. Here, if desired, you can turn off the sound. Although this feature is practically not applied.



9. After specifying the settings, press "Convert!".



10. The procedure for converting an MP3 audio file in M4A is performed. Her progress will be displayed as a percentage.



11. After completing the conversion, automatically without user intervention will start "Conductor" In the folder in which the M4A converted file is located. Now you should change the expansion in it. Click on this file. PKM.. Choose from the Locked List "Rename".



12. Change the expansion of S. "M4A" on the "M4R" and press ENTER With the subsequent confirmation of the action in the dialog box. At the exit, we will get a ready-made Audio File M4R.

As you can see, there are a number of converter software, with which you can convert mp3 to ringtone audio file for iPhone M4R. True, most often the application performs conversion in M4A, and in the future it requires a manual change of expansion on M4R by usual renaming in "Explorer". Exception is converter Format Factory.where you can perform a complete conversion procedure.

Recently, we get a lot of questions from new technician users. Apple Regarding the creation of ringtones for the iPhone. The thing is that melodies for calls are one of the branded restrictions of "apple" phones. Do not panic, you need to take it and find out how quickly and just create a ringtone from your favorite song.

In contact with

To create a ringtone on a call, we will need Mac or Windows Computer from installed program iTunes. (You can download at the bottom) and, in fact, the composition, from which we will do it. The song used should be in one of the supported formats, for example, in * .mp3. So.

How to create a ringtone for iPhone with iTunes

1. Run iTunes on your computer and add the necessary song to the library. To do this, press the menu File -\u003e Add to Medics. After that, select the file and it is imported into iTunes. 2. Press the right mouse button on the downloaded file in iTunes and select the item " Intelligence". Go to the tab " Parameters«.

3. Rington duration for iPhone is limited to the 30th seconds. You need to install checkboxes at " Start"And" the end"And specify the time interval that will be used in the ringtone. Click "OK".
4. Now you need to click on the right mouse on the song in iTunes and choose the item " Create version in AAC format". There will be a duplicate of our song in the library. 5. Now press the right mouse button on the new file and choose the item " Show to Finder» (« Show in Execient»For Windows). The folder opens with this file.

6. Initially, it is created in format * .m4a. and it must be changed on * .m4r. (This is the ringtones format for the iPhone). It is enough to enable the file renaming ("ENTER" button for OS X or "F2" for Windows), and replace the extension. If in Windows it is not displayed should be enabled " Displaying Extensions for Registered File Types»In the conductor menu Service -\u003e Parameters folders (tab View).
7. Now you need to return to iTunes and delete the file we created. Click on it right mouse button and choose the item " Delete»In the dialog box that appears, we specify" Leave file«.

8. It remains only to return in the conductor to the renamed file and press it twice. After that, Ringtone is imported into iTunes to the " Calls". Instead of double pressing, you can repeat the import procedure from the "1" point and specify the new Created Ringtone.
9. We connect the iPhone to the computer, go to section " Calls»On the device and turn on synchronization. After selecting ringtones and pressing the " Synchronize"All melodies will fall on the phone.
10. Go to B. iOS settings and go to point Sounds -\u003e Ringtone. Among standard melodies will appear your new downloads, they can be selected as a ringtone for a call.

If on your iPhone with jailbreak, then you can use.

Standard melodies Call on Apple devices are always recognizable and are very popular. However, if you want to put a favorite song as a ringtone, you will have to make some efforts. Today we will look at how you can create a ringtone for the iPhone, and then add it to the device.

Apple's call melodies have defined requirements: duration should not exceed 40 seconds, and the format must be M4R. Only subject to these conditions, the ringtone can be copied to the device.

Below we will look at several ways to create a ringtone for your iPhone: using the online service, the iTunes brand program and the device itself.

Method 1: Online Service

Today, the Internet provides enough online services that allow in two accounts to create ringtones for an iPhone. The only nuance - to copy the finished melody, it will still need to use the ITYUNS program, but a little later.

On this, the creation of a ringtone with the help of the online service is completed.

Method 2: iTunes

We now move directly to, namely the built-in means of this program that allow us to create a ringtone.

1. To do this, run iTunes, go to the left right corner of the program to the tab "Music", and in the left area of \u200b\u200bthe window, open the section "Songs".



2. Click on the track that will be turned into a ringtone, right-click and in the displayed context menu Select "Intelligence".



3. "Parameters". Here are contained "Start" and "The end", Near which you need to put ticks, and then specify the exact time of the beginning and the end of your ringtone.

Note, you can specify any segment of the selected song, but the ringtone duration should not exceed 39 seconds.



4. For convenience, open the song in any other player, for example, in the standard to correctly select the necessary time intervals. When finished with the time, click on the button "OK".



5. Select the trimbed track with one click, and then click on the tab. "File" and go to the section "Convert" - "Create a version in AAC format".



6. In the list of tracks will appear two versions of your song: one source, and the other, respectively, cut. We need it.



7. Right-click on the ringtone and select the item in the displayed context menu. "Show in Windows Explorer".



8. Copy the ringtone and paste the copy at any convenient place on your computer, for example, by placing on your desktop. We will continue to work with this copy.



9. If you look at the properties of the file, you will see that its format m4A.. But in order for iTunes to recognize the ringtone, the file format must be changed on m4R..



10. To do this, open the menu "Control Panel", in the upper right corner, set the view mode "Small badges"and then open the section "Explorer parameters" (or "Folders settings").



11. In the window that opens, go to the tab "View", go down to the end of the list and remove the checkbox from the point. "Hide extensions for registered file types". Save the changes.



12. Return to a copy of the ringtone, which in our case is located on the desktop, right-click on it and in the pop-up context menu, click on the button "Rename".



13. Manually change the file extension with the M4A on the M4R, click the key ENTERAnd then agree with the introduction.

Now everything is ready for copying the track on the iPhone.

Method 3: iPhone

Ringtone can be created and with the help of the iPhone itself, but here without special applications not enough. In this case, the smartphone will need to install Ringtonio.

1. Run ringtonio. First of all, you will need to add a song to the app, which will later and become a ringtone. To do this, tap in the upper right corner on the icon with the folder, after which provide access to your musical collection.



2. From the list, select the desired song.



3. Now spend your finger sound trackHaving distinguished this area that does not enter the ringtone. To remove it, use the tool "Scissors". Leave only the part that will become a ringtone call.



4. The application will not save the ringtone until its duration is more than 40 seconds. As soon as this condition is respected - the button "Save" will be active.



5. To complete, if necessary, specify the name of the file.



6. The melody is stored in Ringtonio, but it will be required from the application to "pull out". To do this, connect the phone to the computer and run iTunes. When the device is determined in the program, click on the upper part of the window on the miniature iPhone icon.



7. In the left area of \u200b\u200bthe window, go to the section « General files» . To the right to highlight the ringtonio mouse with one click.



8. The previously created ringtone will be seen to the right, which will be needed to simply drag from iTunes to any place on the computer, for example, on the desktop.

Transfer Ringtone on the iPhone

So, using any of three ways, you will create a ringtone that will be stored on your computer. The point is left for small - add it to an iPhone through Aytyuns.

Creating a ringtone for the iPhone for the first time it may seem like a fairly time-consuming. If you can - use comfortable and free online services Or applications, if there is no - iTunes will create the same ringtone, but the time for its creation will leave a little more.

Apple brand smartphones, also called iPhone, attract many customers of ease of use and design. This is a thin phone with a variety of features available to the user around the clock. It is produced on the IOS operating system. On the market mobile phones This is the main competitor for all Android phones.

We all users of smartphones, love our phone to look unique - for this we use various personalization elements - menu design, wallpapers on the main screen, and, of course, ringtone. But not all the tracks that we like are starting quite loud or from the moment that I would like. To do this, there are ways to trim the melody.

Make Ringtone for iPhone 4, 5 can be using multiple programs (iTunes, ITools (OS X / Windows); (GarageBand (OS X); Fried Cookies' Ringtone Maker (Windows), as well as on online services.

Creating Rington for iPhone using iTunes

So how to create a ringtone in iTunes:

1. Download and install the iTunes program on a computer.
2. Load the song that we want to trim for a call to the phone.
3. In the program interface in the "Music" tab, we find the necessary track.
4. Press the right mouse button on the desired song, select the "Information" section. We go to the "Parameters" tab.
5. In the Options tab, we see the Start Line and the Stop Time. We put the checkboxes and assign these parameters to your discretion. For example: 0:35:00 and 0:01:05.
   • Tip: Let's listen to the track in advance and define the exact time of the beginning and end.
   • Maximum length Rington for iPhone - 30 seconds.
6. Click OK and see the initial menu - a list of music tracks.
7. Right-click on the track again, then select "Create a version in AAS format". Now, our list appeared in the list with the same name as the trimbed song, but its duration is 30 seconds.
8. Press the right mouse button on the resulting file, select "Show in Windows Explorer". A folder opens in which our file in M4A format is located.
9. In order to read the iTunes file, you need to change its name and immediately format. Thus, our file, for example, Song.m4a should be Song.m4r. After saving, we will see that the file icon will change. If the file format cannot be changed:
   • When only our folder opened, click the alt key - The above menu appears. Press the service - folder parameters.
   • In the window that opens, go to the second tab ("View"), the list of the list down and remove the check mark in front of the string "hide extensions for registered file types" - apply - approx.
10. When we successfully changed the format, press the left mouse button on our music file, it will have to play in the program.
11. After that, click on the "Music" button in the upper left corner - sounds (ringtone). Different versions Programs may have differences in the names. We go into this deposit and see our file there.
12. But the phone still can not read this file, so we need to synchronize sounds.
    • Press iPhone button. In the window that opens, we see a lot of tabs: sounds, music, photos, videos and others.
    • We choose the tab "Sounds" and celebrate our created ringtone.
    • Press the "Apply" button. We wait for the end of synchronization, and the ringtone becomes available in the phone.
13. We go back to the "Music" tab using the button in the upper left corner and delete the 30 second file that was created because it will only interfere.
14. Do not forget that we are in the properties of our full-size track put a duration from 35 seconds. In this case, if the track is in the playlist, it will automatically be played from 35 seconds and go 30 seconds. We go into the "Information" section and in the "Parameters" tab, we remove the checkbox at the time frame, which we put it, click "OK".

Additionally, read articles: and.

Creating a ringtone using the iTools program

Perhaps the interface of this program will seem easier for you. it alternative way Rington creation for iPhone 4, 5.

1. Download the ITools program and run it on your computer. Of course, our phone is already connected.
2. After connection, the program window will appear. In the menu on the left, select the Media tab - "Ringtones" (with the bell icon).
3. At the top, on the panel that appears, we find the icon of the bell and click.
4. In the window that appears, you can choose any fragment of the ringtone for up to 25 seconds for SMS and up to 40 for calls, we can listen to it immediately. Install the framework, press the Save button.
5. In the window that appears, select the "Import to Device" function. You can also save on a PC, but this is at your discretion.
6. We complete the work with the device and be satisfied with the new ringtone, which has become available in the phone.

Methods for creating ringtones online

There are several online services that can make Ringtone on an iPhone online. All of them work in this way:

• we load the track to the server that we want to trim;
• cut it off;
• the site issues a link to download ringtone in two types: .mp3 and M4R formats. One of the bottom for listening to the computer, if there is such a need, and the other to install it as a ringtone for our iPhone.

Here is a list of some of the most common online services, on which we can create your ringtones.