Installation 1 with 8 3. Installing the basic version

This article will consider in detail the algorithm for installing the client part of the system "1C: Enterprises" 8.3 (for versions 8.2 , 8.1 and 8.0 The installation algorithm is similar to the installation of the "1C: Enterprise" system 7.7 I wrote) in the operating systems of the family. Typical work options "1C: Enterprises", and will also be given short description All components of the system.

0. Initial information about the system "1C: Enterprise"

The "1C: Enterprise" system is a set of software modules intended for the development and use of applied solutions ( configurations) - on keeping and automating the economic activities of enterprises. Software modules Systems "1C: Enterprise" are universal and able to work with any configuration. R abote with information bases is possible as in fileand in client-server variant.

In the case of working with a file information base, the database files are located either directly on the user's computer running in the program "1C: Enterprise" or on the network resource to which "1C: Enterprise" is connected to work with the information base. The figures below present the most common scenarios of the operation of the "1C: Enterprise" system with file bases data.

This mode of operation is suitable for information bases that a small number of users simultaneously operates.

If it is assumed that the information base will work simultaneously big number users, or a significant load on the information base is expected, you should use cluster of servers "1C: Enterprise". In this case, database files will be located in a separately installed DBMS (database management system), and the server cluster will interact the end user with this DBMS. In the general case, the scheme of operation of the system "1C: Enterprise" will then be as follows:

I wrote in detail about the installation cluster "1C: Enterprise" in the article. Further it will be only about installing client application Systems "1C: Enterprise", i.e. system modules required to work with file information bases or to connect to the current cluster of "1C: Enterprise" servers. To do this, we need:

The computer responsible for installing the 1C: Enterprise client application is running Windows.
Local administrator rights on this computer.
Distribution for the installation of Modules of the "1C: Enterprise" system. IN this example Used version 8.3.4.389 . Installing the Modules of the "1C: Enterprise" system of earlier versions is similar.
Or, suitable for the required mode of operation "1C: Enterprise".

1. Installation of the component of the system "1C: Enterprise"

Open the directory with the "1C: Enterprise" installation files and launch the filesetup.exe..

Installation assistant 1C: Enterprise 8, click " Further" on the first page.

On the next page, you can change the folder to install the Modules "1C: Enterprise" by clicking the " Change"And specifying a new path for installation, and you must also select those components that will be installed. The list of components envy from what needs to be installed. Depending on the type of distribution, not all components can be available for installation. If you need to install any component (or cancel the installation), you need to mark it by pressing the icon to the left of the component (or key Space), In the menu that appears, select one of the options:

This component will be set to local hDD.
This component will be unavailable.

Let us give a brief description of the components installed:

1C: Enterprise - The main components of "1C: enterprises", including components for administration, configuration, thick and thin client.
1C: Enterprise - Slim Client - Components thin client Just for work in the client-server version.
1C: Enterprise - Slim Client, File Option - Thin client components, including components for working with file option information base.
Server 1C: Enterprise - Server components "1C: Enterprises" (more about the installation of the server "1C: Enterprises" Read).
Web Server Extensions Modules - Web server expansion modules needed to work for web client and Web services (more about configuring web access to "1C: Enterprise" databases.
Administering Server 1C: Enterprises - Additional components to administer the "1C: Enterprises" cluster.
Interfaces in different languages - Custom interfaces in different languages.
1C Configuration Store Server: Enterprises - Components of the 1C: Enterprise Configuration Server components.
IB 1C Converter: Enterprises 7.7 - Converter of information bases.

Selecting the necessary components for installation click " Further».

In the next step, you must select the interface language used in the future (by default, the operating system language). Indicating the language of the interface clamp " Further».

Click " Set»To start the installation of the" 1C: Enterprise "system.

Upon completion of the installation process, the assistant will offer to install the Protection Driver - HASP DEVICE DRIVER. It is necessary to install the protection driver only if in a USB port this Computer will be installed hardware key HASP4 NET protection (driver installation can be performed later using the menu item " Start» — « Programs» — « 1C Enterprise 8.» — « Installing Hasp Device Driver"). We leave or remove the flag "Install Protection Driver"And click" Further».

If the installation is completed successfully, the final installation assistant page will appear. If you leave the flag " Open the readme file"The file will be opened with information that it seems to be read before using this version of the system. Click " Ready»To complete the wizard.

2. Adding an information base to the list of information bases

During installation on the desktop, a shortcut will be created to launch "1C: Enterprises". If you run it, the "1C: Enterprise" launch program opens with an empty list of information databases and offers to add a new information base to the list.

Subsequent actions depend on the specific situation:

If you need to create new base data to start accounting, click " Not"And first of all, install a typical configuration template, and then on the basis of the template, create a new information base. Read more about this in the article.
If you need to connect to an existing information base, click " Yes"And add this database to the list of information bases. How to do it with the article.

3. Installation of license 1C: Enterprises

Software products "1C: Enterprise" version 8 Can be protected from copying hardware LPT or USB keys type HASP4 NET from the companyAladdin. Or using the software licensing system. It is possible to simultaneously use both types of protection. After installing the system "1C: Enterprise" and creating information bases, it remains only to establish a license for the work "1C: Enterprise".

I wrote about the installation and configuration of the HASP protection keys in the article ""
I wrote about the system licensing system in the article "", as well as about the case of the primary license in the article ".

Will this article help you?

How to install 1c enterprise 8.3? This question is tormented by many newcomers, in fact it is much easier than could seem to you! For this, it is not necessary to be at all. In this step-by-step instruction, I will tell you the process of installing the program 1C 8.3 and how to set the configuration 1C on the example of "1C enterprise accounting 8" with the operating windows system. The procedure is absolutely similar to other applications, such as 1C Trade Management.

By the way, if you have not bought 1C, you can order any 1C program and customization services. Delivery and installation of 1C profs in Moscow and regions for free!

Installation can be divided into 2 small steps:

First of all, installing the 1C 8 platform itself and
Installing the configuration: Configurations 1 with a lot, and consider the installation of all is not possible. For example, I take the most popular configuration - 1C company accounting.

Get 267 video tutorials for 1C for free:

As a rule, configuration files are packed in an archive in which setup files. It looks like this:

In the archive you need to find and run the file "setup.exe".

This window will appear:

Here it is necessary for the first three items, as in the picture, set the parameter "This component will be installed on a hard disk." Also in the interface languages \u200b\u200bmenu, you can specify the need for you (the default is Russian / English).

Beginner users of programs developed on the 1C: Enterprise platform, coming up by the time of the purchase of the "box" or already acquiring it, naturally wonder: "How to install 1c enterprise?"

In fact, the installation of 1C enterprise is a simple process, possess some special skills and knowledge to do not necessarily. In this article, we will consider in detail the installation process and give step-by-step instructions to remove all possible questions when installing.

The first thing for installation it is necessary to obtain the installation distribution of the 1C platform. This can be done in three ways:

Take the distribution on the disk in the most yellow box that you received when buying any configuration 1C. In this case, you can not even look for the distribution path itself on the disk, but to use the autorun;
In the presence of the ITS subscription, it is easy to register on the support site users.v8.1c.ru and download distributions from there.
Again, in the presence of an ITS subscription to request the installation distribution from the representative of the company serving you.

* It is worth noting that regardless of where the distribution is derived from where the distribution process is obtained, the installation process of 1C 8 will remain unchanged.

Let's stop a little more on the first two ways to obtain a distribution.

1. In the box you purchased, there is a disk with the installation distributions of the platform and configuration 1C. To install, insert the disk and use the auto start. You will see the following window (it is equally for all standard 1c configurations):

Fast setting 1C 8 and launch. The program itself will install the minimum required component set.
Selective installation 1C 8. The user independently selects the necessary installation components.

To install the 1C platform, choose the item "1C: Enterprise 8". We will tell about further actions below, since they are the same for all points.

2. To download the distribution from the 1C support site, lend to the address bar of the browser address

After downloading the site, you will see the following:

In the text, active links are highlighted in color to go to the necessary sections. You will need to "update programs" or "download updates". Pressing any of the inscriptions will lead you to a page with a list of partitions to download (of course, after entering the login and password that you are asked when registering on the site).

In the list of sections you will need the very first, "technological distributions". Click on it and see subsections. You will need one of the sections shown in the screenshot below, depending on which platform you want to put.

In our example, we will install the version 8.3 platform

Go to this subsection and see available versions. We will put the last one, but if necessary, you can choose any of them.

Pressing on the desired versionYou get into the options menu for download. Let you not frighten the abundance of items: you will need only one of two - a technological platform for 32x or 64x-bit * versions of Windows.

* It is important to remember one nuance: the platform for 32x-bit versions works perfectly on 64x-bit, but not vice versa.

After selecting the version, you fall on the page with the download link. Download the archive with the platform to any place on the hard disk. After unpacking, you will receive a folder with the following files:

You will need a "setup" file. He is the penultimate in the list of files. Run it with double clicking, and the installation begins.

Directly installing 1C.

The 1C installation process itself is very simple. As a rule, it is enough to agree with the proposed options for settings when installed.

In the first window, click "Next", in the second - select Components for installation. Here you can change anything. To work with 1C, it is enough to install the minimum set of components specified by the default system. You can also select a folder to which 1C will be installed. By default, this is C. C. Click "Next".

In the next window you will be offered to select the interface language. 3 options available: system settings (default your language windows version), English and Russian. Choose the desired option. In the next window, the program will report that everything is ready to install. Press the "Install" button. We wait for the end of the installation and in the window that appears we see the offer to install the protection driver. If you purchased 1C version (USB), then do not take a tick. If you have a version with software protection, you can remove it. Click "Next".

In the next window, the program will report that the 1C installation is completed. Uncheck the tick if you do not want to read the help information and click Finish.

So we finished: completed the installation of 1C. After that, a shortcut must appear on the desktop quickly launch programs. Ahead of you will be waiting for the installation and configuration setting - the configuration in which you have to work.

Hello dear blog readers. In this article I would like to consider in detail the question of independent installations on computer software 1C On the example of the configuration 1C ZUP. Most regional representatives of 1C, selling software products, promise free installationwhich will be included in the price of the purchased program. However, recently begins to get the distribution of the purchase of 1C programs via the Internet with delivery to your region. At the same time, the savings are obtained significant. For example, one famous online store offers to purchase the basic versions of 1C ZUP in just 2,550 rubles. (against 4,600 rubles. at regional representatives 1C - savings 45%) and 1C of Jul in just 2,599 rubles. (against 3 300 rubles. - savings greater than 20%). The only thing that in this regard may cause difficulty is to install the program. However, I assure you, and you will soon make sure that in installing the program 1c there is nothing supernatural and everyone can implement it.

The installation of any software product 1c can be divided into three stages:

Installation of the 1C platform - The platform is the foundation that builds various programs 1C, whether it is a salary, accounting, trade and others;
Installing the configuration 1C. - Actually, the installation of the program or configuration itself, as it is called in the documentation for 1C (ZUP, Buch, trade and other);
Database creation - If you run 1C, the first thing the database selection window opens. This list can be more than one base if you use 1C ZUP and Broke, or keep taking into account several organizations in different information bases, and if you are a programmer or 1C consultant, then in this list, as a rule, complete mess and chaos.

✅

1C comes in the form of a box, therefore 1c and called a boxed product. This box contains an installation disk, an ITS disk (information and technological support), 1C books (usually 1 book about the configuration itself and several to administer 1C). To install the platform, you must place the installation disk in the computer's drive, the window will open where you want to select the installation of the platform. If the disc itself was not promoted and the window did not appear, then we open the "My Computer" to find a disk label and go to it. On the disk, you need to find either filetostart.exe- to start the disk or setup.exe- to start the installation. A welcome window will open, where you need to click "Next".

Click "Install". After that, the installation process will begin, at the end of which will be asked to install the Protection Driver.

After the installation of the platform is complete, 1C label should appear on the desktop, running which we will see an empty list of information bases.

Installing the configuration 1C.

✅ Seminar "Lifehaki 1C ZUP 3.1"
Analysis of 15 lifehams according to 1C ZUP 3.1:

✅ Check-list for checking salary calculation in 1C ZUP 3.1
Video - Monthly independent accounting check:

✅ Accrual of salary in 1C ZUP 3.1
Step-by-step instruction for beginners:

The configuration is configured to install 1C configuration templates, of which it will then be possible to create information bases for accounting. So, in order to make it necessary to activate the initial window, which opens when the installation disk is promoting. In this window, select the configuration setting. A welcoming window will open, where we click "Next".

Press the Add button. In the window that opens, select "Creating a new information base" and click "Next".

In the next window, enter the name of the created base. For example, Alpha ZUP LLC. Click "Next".

The next window is final. It has a lot of settings, but it's better to leave everything by default. We click "Finish."

Now you can run the information base. However, if you have software protection 1C (currently in overwhelming majority), then when you first start the program, you have to get a license. To do this, it is necessary that the computer has a connection to the Internet. Of course, there are ways to activate the program and without the Internet, but it is not very fast and convenient. Choose "Obtain a license".

It is necessary to introduce the "set number" and "pins". These data are in one of the envelopes that can be found in the box.

Actually, after entering this data, you can open the created information base and start keeping accounting.

Today it's all! I will be happy to see you again on my blog. Soon there will be new interesting materials.

To find out the first on new publications, subscribe to updating my blog:

You have become a happy owner of one of the "yellow" boxes with the program of the company 1C. We have already told how to independently install the 1C: Enterprise platform, and now let's go directly to the configuration setting with which you have to work. The process will illustrate the screenshots of the establishment of the most popular solution in Russia - "1C: Accounting 8".

Install the accounting configuration is not more difficult than the 1c platform, but there is one nuance: you will need an installation distribution, but download it from the 1C support site, as in the case of the platform, it is not always possible, since The principle for which the developer is laying the installation distributions of configurations, is known only to it. Therefore, it is worth remembering that the distribution site will be far from the support site for each configuration. The easiest way is to take the distribution from the installation disk, which you will find in a box with a purchased accounting program, or request from a representative of the serving company if you have a contract with it.

Installation "1C: Accounting"

When installing the configuration from the disk, it is best to use autorun. When installing 1C: Accounting discovery of the automotive disk will result in entering the main menu ::

We will need a "selective installation" item. When you click on it, you fall into the next menu in which we are interested in the "Configuration of the Company's Accounting".

After that, the installation of the accounting configuration template begins, from which we will create a new base.

When you start a distribution received from a representative of a serving company or downloaded from the support site (for some configurations, the developer lays out setting distributions), you see the archive that must be unpacked to open the view folder:

We are interested in the setup file. We launch it double by pressing that it will start setting the conference template to the hard disk. You will see the window:

The program will ask where to install the configuration template? You can leave the standard path, you can specify your own.

The installation process takes up, as a rule, a few seconds. After that you will see the window:

The configuration template in which we have to work is created.

We see a window with a list of information bases.

If you create the database for the first time, the Bases list will be empty and the program itself will offer you to create a new base. If, as in our case, the list of database is not empty, you can create a new database by clicking the "Add" button on the right side of the window.

We are interested in the clause "Creating a new information base". Accordingly, click "Next".

Here you have to choose "Creating from the template", as well as the version of the candy that we have installed earlier.

If the window with a list of configuration templates is empty, then we return to the list of the databases and click the "Settings" button. It is located there, where the "Add" button is slightly lower.

Check that the path you installed the configuration template is registered in the directories window, as shown in the screenshot. Next, we return to the previous window. We choose the configuration that we want to create and click "Next".

The program will propose to come up with a configuration name. This name will be displayed in the database list. Click "Next".

Specify the path to the folder in which our new base will lie.

It follows the window designed to adjust the start parameters. But we will not do this, leaving everything as default. If you have already installed the 1C platform on your computer, then in the last window, the "version of 1C of the enterprise" is to specify the version of the platform. If you write 8.2 or 8.3 in the window, the program will be launched on the last found version of the corresponding platform. You can also specify the version of the platform completely. In this case, the configuration will be launched only under this version, despite the presence of other versions.

We press "ready" and stupid. Creating a base takes about 3-7 minutes depending on the parameters of your computer.

After creating the database, the program redirects you to the initial window with a database list, where you will see your new configuration.

After that, you can only start the Mode "1C: Enterprise" or "Configurator" and get started. Ready, we completed the installation of 1C accounting!