Connect to iTunes via WiFi. How to connect iPhone to computer

If you did not activate the wireless way to transfer data in iTunes settings, then no one iPhone sync Or iPad with a computer can not be speech. Check yourself.

Connect the device to a USB computer.
Open iTunes. If you need, enter an Apple ID and password to enter the account.
Click on the icon of your mobile device In the iTunes window and select "Overview" on the sidebar.
Make sure that on the right side of the window "Synchronize with this [Device] via Wi-Fi is marked by a flag. If this is not the case, then tick it.
Click on the button "Apply" (or "Finish").
Disconnect the USB cable and make sure that the computer and the mobile device are connected to the same network.

If everything is configured correctly, then after these actions you can run the synchronization between devices using the Synchronize button in iTunes.

If the data sharing does not occur, try one of the solutions listed below.

What to do if iPhone or iPad is not synchronized with a computer running Windows

The problem may be caused by an error in the service that provides iTunes. Try to restart this service.

Close iTunes and disconnect the device if it is connected via USB.
Press Ctrl + Alt + Delete to launch the Task Manager.
Click the "Services" tab and find the Apple Mobile Device Service item in the list that opens, or with a similar name.
Right-click on the found item and select Restart.
Open iTunes and try synchronize devices.

What if the iPhone or iPad is not synchronized with the MAC computer

The problem may be caused by an error in the process that provides iTunes. Try to restart it.

Open the System Monitoring Utility. It is located in the Finder → "Programs" → "Utilities".
On the CPU tab, find a process with the name like applemobileDeviceHelper or iTunes Helper.
Select the found item with the left mouse button, then click on the cross in the upper left corner of the window and select "Complete".
Open iTunes and try synchronize devices.

What to do if nothing helped

Restart and reconnect your computer and mobile device.
Try running wireless synchronization via iPhone or iPad. To do this, open the "Settings" section → "Basic" → "Synchronization with iTunes via Wi-Fi" and click on the computer name that appears.
Update iOS and iTunes to recent versions.
Turn off the data transmission over the cellular network and leave only Wi-Fi only, then repeat the synchronization attempt.
Restart the computer and mobile device, then try to sync them again.
If the computer does not recognize the IOS apparatus even via USB connection, check out this.

Yes, connect the iPhone or iPad to personal computer on the windows database or Mac OS X is elementary simply and with iOS 5 and iTunes 10.5 to do this is not only a standard USB cable. If you know all the ways of connecting the "iPhone - computer" and you have no problems with it, pass by, the rest - welcome "under the cat."

Perhaps, after reading the title, experienced IOS users will throw me "rotten" comments and have it right, because to connect the iPhone to the computer is elementary simply.

As part of today's publication, we will consider ways to connect iOS-devices (iPhone and iPad) to a personal computer based on Windows and Mac OS X, get acquainted with the advantages and disadvantages of each method and try to find the best.

Ways to connect iPhone to computer

Initially, connect the iOS database to the computer only the USB cable was supplied with the device, but with the appearance of the iOS 5 version and iTunes 10.5, the second, more universal - on a wireless Wi-Fi network appeared.

To date (actual iOS 7.1.2 and iTunes 11.3), connect the iPhone or iPad to the computer in 2 ways:

USB cable;
wi-Fi wireless network.

With the first problem, there are no problems, one end of the cable with a USB connector is connected to the appropriate port of the computer (this may be uSB ports 2.0 and USB 3.0), and the other insert into the iPhone or iPad connector.

Connecting an iPhone on a wireless network requires more. If you have a wireless router and here there are no difficulties: in the IOS settings, turn on Wi-Fi (appropriate switch to "Settings -\u003e Wi-Fi"), select the network created Wi-Fi Router And wait for the connection.

What to do those who have only a computer with Wi-Fi module, laptop, for example, and iOS-device? It is necessary to create separate wireless network "Computer-computer", but about everything in order.

How to connect an iPhone to a computer USB cable

Included with each iOS device there is a standard cable with a USB connector at one end and a 30-pin or lightning connector (depends on the iOS-device model) on the other, it is customary to be called "cord" in the Apple community.

A USB cable with a 30-pin connector is used to connect to a computer: iPhone 2G-4S, iPad, iPad 2, iPad 3, iPod Touch up to 4G inclusive.

How to create a Wi-Fi network for connecting iPhone

Create a wireless network using a computer with a Wi-Fi module, a laptop, for example, is not difficult, but to connect to it iOS-device it is necessary to take into account a number of features.

When creating a Wi-Fi network, I propose to use the recommended settings for routers and Wi-Fi access points from Apple.

Creating a Wi-Fi network on Mac in OS X

Under hand, there was no computer based on OS Windows, consider the procedure for creating a network on a poppy, for Windows Procedure I will describe the text.

In the Mac OS X environment, go to "System Settings -\u003e Network" and select "Wi-Fi" in the list on the left.
Click on the "Network Name" drop-down list and select "Create Network".
In the "Computer-Computer Network" window, enter the network name, the channel can be left by default, in my case 11th and opposite "Security" click on "not selected".
In the list of the list, select the type of data encryption when they are transmitted via a wireless network:
- not selected - encryption is disabled, it is not necessary to enter the password to connect to the network, each (even an attacker) can access the wireless network;
- 40 BIT WEP - WEP encryption type (Wired Equivalent Privacy) Password length: 5 ASCII characters or 10 hexadecimal numbers (when you enter a sufficient number of characters, the "Create" button will become active).
- 128 BIT WEP - WEP encryption type Password length: 13 ASCII characters or 26 hexadecimal numbers.
Personally, I do not understand why apple company It recommends setting WPA2 encryption for Wi-Fi networks, while only WEP is available in OS X, but you do not have to choose.

Tip: In OS X, choose the type of encryption with maximum length key, i.e. "140 WEP BIT", the password will need to enter only 3 times, 2 times when creating a network (input and confirmation) and 1 time on the iPhone when connected. Network settings in the iPhone are automatically saved and when the created network is available, the device will connect to it "on the machine" (with each connection to enter the password to the well-known network you do not need).

Select the desired encryption type and click on "Create".
Wireless networkWi-Fi will be created, Mac will automatically be connected to it (since it is its source), it remains to connect an iPhone to the created network.
On the iPhone (or iPad), go to "Settings -\u003e Wi-Fi" and turn on the Wi-Fi device module with the corresponding switch.
In the "Select Network" list, a Wireless Network created in Mac OS X will appear, tap by its name and enter the password. Ready!
After connecting to the generalWi-Fi network of iPhone and Mac, run iTunes and your "Devices" menu will appear.

Creating a Wi-Fi network to connect an iPhone to a Windows laptop

If there are no problems with the compatibility of iOS devices with desktop or portable computers, there are no problems (stable connection), then when connecting iPhone to Windows PCs on Wi-Fi sometimes difficulties arise:

iPhone and iPad are not connected to Wi-Fi network with WPA2-encryption;
iOS devices are not connected to the 802.11n Wi-Fi networks if the multimedia support feature is disabled in WMM networks (Wi-Fi Multimedia).

In the Windows DCHP server, which is responsible for assigning the IP address, the connected devices does not always work correctly and stably, therefore, when distributing addresses in automatic mode (when the DHCP server is enabled), the wireless connection "Computer-iPhone" can be unstable. That is why the computer's wireless network adapter must be assigned a static IP address:

In Windows 7, go to "Control Panel -\u003e Network Management Center and Sharing" and click on changing the adapter parameters.
Right-click on "Wireless network connection»Call context menu and select "Properties".
In the list "The marked components are used by this connection", select "Internet Protocol version 4 (TCP / IPv4)" and click the "Properties" button.
Install the ticks opposite "Use the following IP address" and "use the following DNS servers addresses", enter: Enter the following fields:
- IP address: 192.168.xxx.xxx;
- Subnet mask: 255.255.255.0;
- Main Gateway: Leave empty;
- Preferred DNS server: Leave empty;
- Alternative DNS server: Leave empty.
Instead of "xxx.xxx", specify the parameters of your subnet (first "XXX") and assign a fixed address (second "XXX" from 1 to 254).

If you use a wired LAN connection to the Internet and the IP address "192.168.0.1" or "192.168.1.1" is assigned to it, wireless connection It should be assigned the address "192.168.2.1".

IP addresses wireless and connecting local network Do not coincide and be within the same subnet.
Install the box next to "Confirm the Options Options" and click on OK.
In the center of network management and shared access, you must create a computer-computer wireless network ("Point-to-point" or AD-HOCK), to "configure a new connection or network", select "Configuring a computer-computer wireless network" and Double click "Next".
On the "Give the name of this network page and select Security Settings" Fill the fields:
- Network Name: Enter any name for your Wi-Fi network (SSID);
- Security Type: Select WEP;
- Security key: Enter the password to the wireless network, it will be necessary to enter it on the iPhone when connected to this network;
- Install the "Save Settings of this Network" checkbox if you plan to connect the device to a computer on a given network continuously and click Next. Network setting will begin.
In the "SSID Network" network window ready for use »Click on the inscription" Enable general access To Internet connection, "if your computer has an Internet connection over a wired connection. It will give the opportunity to "share" the Internet from the computer for Wi-Fi on the iPhone, i.e. The iPhone will be connected to the Internet via the computer (PC will perform the gateway function).
In the window with the message "Sharing Internet Connection Enabled", click "Close". The wireless network is created, the computer is automatically connected to it (it is not necessary to connect separately) and it looks forward to connecting devices with a wireless way.
On the iPhone, go to "Settings -\u003e Wi-Fi" and turn on the wireless module switch.
After the network created is found, tap on its name and wait until the device connects to it. Ready!

Use the iPhone connection to a Wi-Fi computer can be used for wireless synchronization, backup, download music, video, contact imports, installation of programs and games from App Store. etc.

Comparison of iPhone, iPod Touch and iPad connection methods

Capabilities	USB	Wi-Fi
Synchronization with computer	+	+
Restoration of firmware	+	—
Update firmware	+	—
Creating a backup	+
Restore from backup	+	—
Installing and removing applications from the App Store	+	+
Loading music, video, television show, ringtones	+	+
Unloading from the memory of the device of music, video, television show, ringtones	file Manager	file Manager
Charges battery	+	—
Discharge battery	—	+
Data transfer rate	+	—
Easy connection setup	+	—
Radius of action	—	+
Additional accessories are needed	+	—
Occupies free ports of the computer	+	—

As you can see, each method (USB cable or Wi-Fi) has its drawbacks, and advantages. To solve individual tasks, you can use the most convenient as possible: Wi-Fi connection Allows you to "split" to an iPhone wired Internet connection, you can restore or update the firmware via the USB cable.

If you can't connect the device to a computer via Wi-Fi, the PC does not "see" an iPhone or appear, write to us in the comments, we will try to help you.

In this article, we will talk about how to synchronize the iPhone with a computer through Wi Fi. The iPhone synchronization is usually carried out through the iTunes utility. But methods can be different - via wifi using a USB cable.

Synchronization is needed to exchange data between iPhone and computer. For example, when the user bought an interesting film to watch it on a laptop. But at a certain point he wanted to enjoy the same film on the smartphone. Just thanks to synchronization, he can do it.

During this important process, the iTunes utility checks whether the newest data is present on a laptop or in a mobile device. After that, it is determined which information will be synchronized. And then the specific way is selected for this.

Before detailed description Procedures, how to synchronize an iPhone with a computer through Aytyuns, for those who do not know, tell me how to install iTunes and run necessary process. For this you need:

Load the utility and install it (the version must be "fresh").
Open utility.
The phone connected via the USB cord to the computer is found in the installed program.
In the Overview tab, click on the iPhone Synchronization item on WiFi.
Press the button confirming the operation, after which you pull the cable from the USB port.
Mark the files to be synchronized and click on the appropriate button.

In the event that the mobile device and the computer are connected to the same Internet, a new device with an IOS operating system will appear in the utility interface. If the smartphone is in charge and on the computer is running Aytyuns, the whole process will start and end on the machine. No active actions will be required.

Synchronization via iTunes on WiFi

As you understood, you can not only wife and master the virtual networks, but also to deal with something more interesting - for example, share information between this device and the computer, and vice versa. After such an exchange of audio and video files on a PC and in the library, the utyuns utility will be completely the same. And this means that watching any movie or listening to the music track will be available from the phone, and from the computer. Without a doubt, it is very convenient. Further we will focus in detail on one of the most convenient ways of synchronization, and first you need to prepare.

Preparatory stage

Before starting all actions, it is necessary to concern how to connect the device to the Internet. As a rule, on all mobile devices from EPL, the Wi Fi connection is configured. If there are problems with connecting, you need to fix it, but only then go to the main one.

Also before the start of all actions, you should contact the Aytyuns utility to carry out automatic synchronization. First, you need to check if it is installed on the user's PC. And, secondly, it is important to check this program to "Freshness".

What files are subject to synchronization?

These are the following types of information:

Separate tracks.
Music albums.
Text files (books, etc.).
Ringtones.
Photographs.
Videos.
Contact information.
Calendars.
Bacups.

The algorithm of the process through Aytyuns

So, after preparatory actions, you can proceed directly to the most important thing - the exchange of actual data between the computer and the mobile gadget. For this you need:

Open / run a PC or laptop utility (depending on which device you will work).
Connect the iPhone to the computer through the USB cord (the accessory must be original!). At the very top of the window, the phone icon pops up.
Press this icon. In the settings, the utility displays a list of all types of information that makes up the library. Love from these files, which make up the library, can be moved to the gadget from the EPLL.
Decide on the type of information that will be transmitted from one device to another, namely, specific files from video, audio, etc.
In the utility interface, put the synchronization flag (if this mark is already there, it means that the process is running, and you do not need to do anything).

Reference. If there is no file in the file repository of the ITYUNS file, the tabs of the tabs may be invisible. Suppose if there are no podcasts, you will not see the tab with the corresponding name.

Also note that some types of synchronization information with ITYUNS are not subject to. In this regard, to manage notes, bookmarks and mail, usefully. In addition, in the IOS operating system there are programs capable of helping the user to transfer data that it can fully replace the synchronization function.

Reference. If a message will pop up at this stage that the iPhone is already synchronized with the utility media storage, it means that the device has previously connected to another PC. However, it should be known to you (of course, if you buy a new certified smartphone, and not a Chinese fake). If you press the button that assumes the performance of the Erase of Information, all previous data will be replaced with information from that computer. With which you are currently working, and to which the phone was connected. At one point in time, synchronization of a device operating on iOS is permissible, exclusively with the 1st media library.

If the process has been launched not in the utility, which is considered, and in another program, for example, iCloud, the similar process in the ITYUNS can be disconnected. Here you should stay at the following important points:

After starting the data exchange process in obligatory on the screen will be reflected additional options Settings. They need to be included that the process takes place successfully.
The last 2 stages in the above instructions (steps 4-5) must be repeated for each type of content to be synchronized.
To save the process settings, you must click the Apply button at the bottom of the display on the right.
Sometimes the process on the machine does not start possible due to software failures). In such a situation, it is necessary to simply press the synchronization button. After turning on this button, the action will start automatically with any iOS-device connection to the PC on which the ITYUNS utility is launched.

And another situation that requires attention - when information about the impossibility of sharing the same or other data pops up. This means that PC has not passed authorization for this type of content.

If the data exchange failed ...

It happens that there is no possibility to install the ITYUNS utility for exchanging data between the mobile device and the computer through Wi Fi. In such a situation, take advantage of the following recommendations:

Perform a PC reboot.
Check that the computer and iPhone can be connected to unified Network Communication.

Reference. Synchronize data through Ethernet is not possible.

Check the firewall settings. If the PC uses the software to protect the device, you can contact developers in the support service on the use of these programs.
Once again to familiarize yourself with the documentation for the router. Probably there is information about how to open the TCP ports 123 and 3689, and still UDP 123 and 5353.

Turning off the process

If you need to perform the opposite action, i.e. Cancel (disable) synchronization, follow these steps:

Run Aytyuns on a PC or laptop, after having previously convinced that the version of the utility is the most "fresh". If it is not, download and install the last version of the program.
Connect the smartphone to the PC using the USB cord.
From above, in the left corner of the display there will be a phone icon. It will appear immediately as soon as you connect the iPhone to the port of the computer.
Click on this icon.
In the program settings (left in the window), check the files for which the synchronization is required.
In the main window, Aytyuns remove the checkbox from the sync flag.

After that, all the information marked with you will be removed from the smartphone memory. And the last, the final step of the process is to press the Apply button.

The happy owners of the iPhone have to overcome one inconvenience - in contrast to smartphones on the operating room android system They have to use softwareSo that the computer can detect a smartphone. At the same time, IOS fans have several ways with which it can connect an iPhone to a computer.

What programs will need to connect an iPhone to PC?

In order for a computer to recognize your smartphone, you must install on its special software. It applies free from the official Apple website. You will need to download two programs:

icloud - convenient way Share files through cloud storage. In order to use it without installing the direct connection of the computer and the phone, you must upload the application to all the devices you use. This program will allow you to access the smartphone files from any device through the browser.
iTunes is the main service that is used to connect iPhones to the computer. Through it, you can also listen to music, download programs and files to smartphones, use the App Store, to update the system.

There are also several unofficial programs similar to the functionality with iTunes. But we do not recommend using them.

How to connect the iPhone to a computer via USB - the easiest and most reliable way

The package of your iPhone includes a cable used to connect to a computer. It may have a thin connector (modern) or wide (for old versions of devices). It needs to be used to connect to a computer. If you have lost such a cable, then you need to purchase an original replacement. You should not use cheap fakes, since the computer can not recognize the device.

To connect on a computer, you should use only USB 2.0 or 3.0 ports, since the connection speeds with USB 1.0 will not be enough - an error will appear on the screen.

We give instructions like an iPhone to connect to a computer via USB:

install a fresh version of iTunes on the PC;
turn on your smartphone;
connect the device and PC cable;
when you first connect the computer will see your smartphone and automatically load drivers for its operation;
note on the phone acknowledgment to access its files;
iTunes should start on the PC screen, after which the synchronization icon will appear in its state panel;
after finishing it, you can access the phone files in the iTunes window.

On the windows devices The smartphone will also be displayed in the "My Computer" panel, but it is no senseless to use the folder overview of the folders, will not be read by the device due to the use of another storage system on iOS.

Connect iPhone to PC via Wi-Fi.

There is another way to connect a smartphone with a computer - creating a wireless connection. The most high-speed option is to use Wi -Fi, but in this case you will not be able to update the software or restore the device from its backup.

It should be remembered that the active use of Wi -Fi will quickly discharge the battery.

Creating a direct connection on Windows Computer

When connecting the iPhone to a computer running on the operating system may occur. To avoid them, it is necessary to take into account the features of iOS smartphones:

do not use the network with WPA 2 encryption;
the 802.11n standard is also not suitable for a device if the multimedia support feature is disabled.

Connection setting occurs according to the instructions:

Open the "Network Management Center" on your computer. For this you need to go to the "Control Panel". On the left, select "Change Adapter Settings".
Right-click on the Wireless Connection used and select the option "Properties".
From the list of components, select "Internet Protocol version 4 (TCP / IPv4)", highlight it and click on the "Properties" button.
Enter in the appropriate lines: your IP address, subnet mask 255.255.255.0. Leave other fields empty. If you use a Wi -Fi connection, then IP will be 192.168.2.1, one of the addresses is assigned to the computer with a wired connected connection: 192.168.0.1 or 192.168.1.1.
Install the marker on the "Confirm parameters at the entrance" item.
Return to the "Network Management Center" and select "Creating a computer-computer network". At the same time, you make an access point for two devices. Follow the wizard prompt to connect the smartphone and computer.
When you configure network settings, you have to specify: any network name, WEP security and key that needs to be entered to enter.
In the network availability window, mark the "Enable Sharing" item. Complete the setting.
Now you need to enable Wi -Fi on your smartphone and find your computer in the list of devices distributing. Connect to the network and you can work with your PC smartphone files.

This method can be used if you have no cable for connecting and you can't find it.

Adjust connecting iPhone to Windows Wi-Fi With iTunes.

For those who have not lost the USB-Shop or can use it, the instruction will be different. They can not configure the connection to the computer, but only in one network with it. In this case, the setting will be carried out like this:

open your smartphone settings and activate the connection via Wi -fi;
log in to the home network;
now you need to set synchronization parameters - for this you have to connect a smartphone with an active Wi -Fi to a computer using a USB -Cab;
open iTunes and go to the Device Management section;
find the "Synchronize via Wi -fi" item in the menu;
apply the selected setting;
now turn off the cable;
go to the smartphone settings;
select "Synchronize with iTunes" and activate this option.

Now you will have a change in settings and synchronization using Wi -Fi. Next time to synchronize with this computer, you will not need to enter additional passwords. It does not matter what operating system manages your computer.

Creating a Wi -Fi network on Mac on direct Wi-Fi Connection

If you do not have a cable at hand, then computer MAC. You will have to create a direct Wi -fi connection between the device and the computer. This procedure is carried out according to the instructions:

Go to system settings And select Wi -Fi.
Click on the name of your network, you will find a list available for connecting options.
At the bottom of this list, find the "Create Network" item.
Set the network name, leave the channel number in the form in which it is.
In the "Security" row, click on the arrow revealed list. Select the WEP encryption type with a maximum key length and set the password. Click on the "Create" button.
Connect your iPhone to this network.
Start iTunes on PC and work with your device's memory.

Install connection to Mac even if the cable is missing as easy as possible, since you do not have to change the settings of the local network.

How to connect an iPhone to a computer via Bluetooth

If you want to connect the phone to a laptop that has a Bluetooth -module, you can use this wireless network. The lack of it is that the connection will occur slowly, the battery will be discharged quickly, and you can work with Bluetooth only by placing the device nearby.

Computers on Windows have another drawback - not all devices allow you to conveniently activate the connection. It is for this reason that Bluetooth uses not all laptop owners. This problem was solved, an icon for activating a wireless connection was carried to the panel quick access In the lower right corner of the screen. There you can customize the use of the network by including your computer's visibility.

If you could activate on your computer, then follow the instructions:

Go to the settings of your smartphone.
Turn on Bluetooth Device Detection.
Among the devices found, find the name of your computer.
A code message appears on the device screen. It is used to synchronize a PC and smartphone. In some cases, the figures will have to be administered manually.

The rest of the work with the smartphone will be carried out according to the same principles as in other cases - you need to open iTunes and synchronize devices.

Now you know how to connect an iPhone to a computer. If you have problems or questions, ask them in the comments - we will definitely support you and help get out of the difficult situation. Share the article with friends to and they can synchronize your device with PC in different ways.

One of the functions that extends the capabilities of Apple mobile devices is synchronization with computers. And if it was previously released using a cable connection through uSB interface, then a modern way assumes wireless wi-Fi technology. Here you will learn how to connect the iPhone to the computer official and alternative way.

Conditions

Using the iTunes wireless synchronization via Wi-Fi is convenient to send any movies and programs, make settings from both devices without problems. True, the quality of data transfer will be slightly worse than the cable connection.

However, it is possible to provide a full amount of data between digital devices, only under the observance of three mandatory conditions:

Connect to one Wi Fi network;
Update on iPhone operating system at least to the fifth version;
Availability on PC branded iTunes applications 6.

Attention: Many gadget owners may be outdated models iPhone. (2 or 3G). The firmware before the specified version of the OS cannot be performed for technical reasons. That is, official Wi-Fi synchronization will not take place. But how alternative option permissible to use sourid app Wi-Fi Sync.

How to connect an iPhone to a computer and use iTunes program, see next video:

Instruction

Note that to start the synchronization process always need a large number of Energy. So charging while finding in offline mode Must be at a level not lower than 20%. If you look into official information, you can read the recommendation of the mandatory connection to the device's power grid, in order to avoid the breakdown of the synchronization process.

Follow our instruction . First install and check special software. Let's start by S. stationary computer Or a laptop, where ITYUNS is connected or not. We download the application to synchronize iPhone from PC to your laptop computer, and tear it with a standard way, with the installer.

It is important to make a reservation here. The connection, though it implies a connection without a wire, but the first setting will still require a USB cable.

Opening the menu iTunes programs, Find the Overview tab and the corresponding item "Synchronize with this iPhone via Wi-Fi". Tick \u200b\u200band click "Apply".

This action you will find a specific apple device In the nearest environment for synchronization on the computer monitor. After that, remove the cord from the mobile device. Now you have a physical interface for sharing via Wi-Fi network.

Attention! Synchronization is possible only for multimedia files, text and backups. If you try, for example, synchronize databases, a message will face a warning that this type of data has not passed authorization.

Directly the start of synchronization begins with settings in the iPhone main screen by switching to the "Settings" application. Moving down the menu, select and click "Sync from iTunes by Wi-Fi". After that, summary information about active computers will be available.

It remains only to confirm the intention to synchronize with the necessary PC. This is done by pressing the "Synchronize Now" button at the bottom of the current window.

I draw your attention to the following: with a successful connector, the inscription on the button should change to "Cancel Synchronization".

Video instructions are available here:

The difference between the official and unofficial synchronization

It exists and affects the purely technical aspects. The difference in the number of simultaneous connections. The unofficial utility allows settings iPhone Get access to exchange only with one computer. Whereas the official installation will allow you to complete the synchronization of all PCs located in the area of \u200b\u200bone Wi Fi network.

Possible mistakes

The algorithm is simple, but how to synchronize the iPhone with a computer, if you suddenly have a freelance situation? Perhaps the first time synchronization will not start, since communication errors are issued on the computer.

In some cases, it is useful to restart the PC. Nevertheless, solving problems, as a rule, is associated with the ports of the router. We are talking about ports TCP 123 and 3689, UDP 123 and 5353.

Also check the PC firewall. Its current security policy may interfere with wireless synchronization.

That's all I wanted to tell. I think there will be no difficulties here. But if you have any questions or, after reading, comments appeared, be sure to write! So far!