DRE 4000 version 3.4.432, new software or satellite update.

DRE 4000 version 3.4.432, connecting the receiver to a TV.

Since we have shown and told you how the new software is being updated on the DRE 5000 receiver, we will not disregard one more receiver ... Which undoubtedly helped to become a digital television operator .... Who has he become now? Because the DRE 4000 was the first receiver…. From which the introduction of digital television began from today's (as many experts believe) the leader of the Russian market in the segment of digital satellite television. We will not remember where this model came from and who made it today, let's look at how the upgrade to DRE 4000 version 3.4.432 is going.

Dre 5000 v 3.4.432 new software, a few words about how the replacement is going.

Dre 5000 v 3.4.432 new software photo#1

Dre 5000 v 3.4.432, a lot of words have already been said from us about replacing the software, but as it turned out, this is not enough, maybe because many have already forgotten how to do it, maybe because someone else did it, there are many reasons and we don’t we will understand why questions arise, today we will simply change the software on the Dre 5000 v 3.4.432 receiver and show how it goes visually.

GS E 501 / GS C 591 System Update, Firmware 2.3.171 - Today we are addressing this important issue for many owners of this equipment.

System update GS E 501 / GS C 591, check software version your receiver

In order to start updating, you need to understand whether you need to do this or not? In our case, we have (according to the operator) old software and this means that we need to update our receivers, because. if this is not done, after a certain time the receivers will begin to fail to meet the operator's specifications.

To all owners of NSK CI+ conditional access modules!

According to the operator, from December 11, 2014 to January 25, 2015, the built-in conditional access system will be updated. This operation will be carried out in order to improve and improve its work as a whole. In order to update the software of your Conditional Access Module CI + module responsible for conditional access to the new version SW 1.1.0 from such satellites as Eutelsat 36A, Eutelsat 36B and Express AT-1 (broadcasting over the territory of Siberia "NSK-Siberia" ) You need:

Every user of technology on the Android platform sooner or later needs to change the software. This is quite simple to do, but the process may seem difficult due to the fact that you need to carefully follow the sequence of actions, otherwise the gadget may become inoperative.

The software of any device requires regular updates.

Let's find out why there is a need to change the software, how to reinstall Android on the device in several ways so that the device works correctly and correctly.

Reasons for changing the firmware

Often, after some time using the tablet, problems or lags occur in the system, some functions stop working normally. On each device, such problems appear after a different amount of time, in principle, there is nothing wrong with them. It just takes time to get it to work properly.

Another reason why the user thinks about changing the firmware is the release of newer software, since in the updated versions the developers are finalizing the previous “irregularities”, adding new functions, changing the design.

Moreover, flashing is of interest to those subscribers who want to install not the official, but the user or custom version of the system - such self-developed software often offers more functionality or a different design.

As you can see, there are many reasons to reinstall the firmware, and there are several ways to do it. Let's take a closer look at each of them.

Reinstalling the firmware

There are several conditions that must be met before reinstalling the system:

• Fully charge your tablet or connect it to the mains so that it does not suddenly run out of power during system installation.
• Correctly select the firmware version - if you are just updating it, then the corresponding file can be found on the official website of the manufacturer. Take a look at the back of the gadget, where its number and model should be indicated - so you can be sure to find the software version that you need. If you install custom firmware, make sure that your device supports it, otherwise it can be damaged.
• To be on the safe side, copy system files such as "wload.bin", "env.bin", and "u-boot.bin" to your computer - if something goes wrong, you can always reset them back to your device.

So, let's move on to the process of changing the firmware itself.

To do this, you will need the device itself, a computer and a memory card. Do the following:

• Connect the memory card to the computer, format its contents.
• Create a folder called SCRIPT on the freed card.
• Unpack the firmware files into this folder.
• Disconnect the card from the computer, insert it into the switched off tablet.
• Start the device, after which the system will automatically update via a memory card - do not remove it until the end of the process, make sure that the gadget does not turn off.
• Wait until the installation of the new firmware is completed, after which your device will automatically turn off. After the first turn on, it will take a little longer to load, as it is the first time it does this with a new system, then you can use your tablet as before.

Check if all functions work and if there is anything strange in the behavior of the equipment. If something went wrong, you can always install the previous firmware by replacing the system files or reinstalling the software.

There is another way to update the tablet - with the help of special programs. Among them, applications such as Odin or ROM Manager are the most popular and trusted. Using them on a computer, you just need to connect a device to it, select a file with firmware in the program, after which the utility will do everything necessary on its own.

In addition, ROM Manager always backs up files before installing new software, so if something goes wrong, you can always restore the previous version of the software and not worry about the health of the tablet.

For some gadgets, developers supply disks with which you can update the firmware, but this is quite rare.

In extreme cases, you can always contact specialists to update the software, but, in principle, you can reinstall the firmware yourself without any difficulties. If you learn how to do it yourself, you will not have to contact the service every time, where such services are often unreasonably expensive.

Replacing computer software is not an easy task. The easiest way is to reinstall the operating system. Software is usually changed due to its obsolescence, inconsistency with user requests, incorrect operation, and so on.

You will need

• - distributions of programs that you want to install on your computer.

Instruction

Decide how exactly you will replace the software - completely with the operating system or just reinstall a few programs.

If you want to change the computer software completely, then restart the computer, and when you turn it on, press the Esc key, set the boot from the disk drive in the settings in the window that appears and save the changes.

Insert the operating system disc into the drive. When the monitor displays “Press any key to boot from CD” when booting the computer, press any key and the Windows setup menu will appear in front of you. Read the terms of the agreement, accept the license agreement and click "Next".

Select a partition for installing the operating system, select the installation mode - with formatting the disk or replacing files. Keep in mind that formatting will destroy all the data on the drive, so you'd better save it in advance on removable media.

Follow the instructions in the operating system installation menu and make all the necessary settings: enter the organization name, computer name, administrator password, set the time zone and create a Windows user account.

Install drivers for all devices available in the configuration. Usually they are supplied with the computer in the form of discs. Install the software one by one on the motherboard, video card, sound device, modems, printers, cameras, and so on.

Install a good antivirus program to protect your computer's file system from infection and malware, such as Norton, Nod or Kaspersky Anti-Virus.

Install the applications you need to work from the available disks or by downloading them from the Internet. When installing, it's best to enable software updates.

If you are going to just replace a few applications on your computer, open the "Control Panel", go to the "Add or Remove Programs" menu, find the ones you want to replace in the list. Select them, click the "Delete" button. The uninstallation process may take several minutes. Then restart your computer and reinstall the programs you need for your work.

If you are just starting to master the computer and do not even know yet, how to install the program, then I am sure after reading this article you will no longer have questions on this topic. Installation of various programs may differ, but it is almost the same everywhere, and in fact, installing a program is much easier than some beginners think at the beginning of their journey.

In general, it’s worth saying that if you do nothing, but simply follow the usual instructions in the windows when installing programs, that is, just press the available buttons: “Next”, “Next” or “OK”, then you can easily install the program. But we decided to learn, didn't we? And we need to know what actions lead to what when installing programs.

Installing programs. Example!

Now, using the example of installing a real program, let's consider how this is done correctly.

After from the Internet or from some disk, we usually have such a file on our computer.

The first step is to launch it by double-clicking the left mouse button. We will open the first window. In 99% of cases this window " Software Installation Wizard where we are greeted. There we can see the name of the program, and sometimes we are reminded that it is advisable to close other applications before installation. In this window, we need to click the " Next".

Almost always, when installing programs, we need to check the box " I accept the terms of the license agreement”, well, that is, it means that we agree with the rules for using this program. Here is an example:

The next window, which is always present during installation, is the selection of a folder. During the installation of the program, a window should appear in which it will be indicated where the files will be copied for its full operation.

Usually the program is installed on the system drive "C" in the folder " Program Files». You can of course change this path by clicking the "Browse" button and selecting the folder where you want install the program. I usually leave it as is, that is, by default! And all the installed software I have is in the “Program Files” folder on the “C” drive.

Very often when installing free programs, they are trying to install some more additional applications for us, or change the start page in the browser. Pay attention to this, and if you don’t need such additions, then uncheck the extra checkboxes, and only then click " Next».

Another window that is always present, and usually after installing the program, is a window in which you need to leave checkmarks in front of the items of interest to us. For example, it can be creating a shortcut on the desktop, or a folder with a program in the start menu, and so on. Read and everything will be clear.

The most important stage is itself, during which the necessary files are copied.

In the last window, after everything has been copied and installed, we are offered to click the button " Finish"And the program will start if we have not unchecked the corresponding checkbox.

We have now described the main windows that appear when software installation. In different cases, they may differ, but the essence remains the same. There are also other points: windows with a choice of the program language, installation of an add-on where you need to uncheck it, etc.

After installing 5 - 10 different programs, thoughtfully and independently, you will no longer have questions in which window what to do, and roughly speaking, the brain itself will work out the necessary actions.

And on the desktop, a shortcut usually appears to launch the installed program.

Good afternoon friends, in this article we will talk about how to install the program on a computer. Various Softs are mostly distributed over the Internet in a compressed form, in order for the program to function correctly, you need to unpack and know how to install the program on your computer.

For the most part, one of the programs is unpacked by the archiver, for example, WinRar. To unpack the newly downloaded program, you need to right-click on it. Then click on the "Extract to current folder" command. The unpacked program will be in the same folder.

All together the programs installed on your computer are called − Software (software). Without it, the computer will not work as the user needs, i.e. will be inadequate.

As I said earlier, the operating system (OS) controls all programs. People in most cases use the Microsoft Windows operating system (2000, XP, Vista, 7, 8). More than 90% of users use the services of this company. Microsoft Windows has earned this trust because of its simplicity, reliable performance, and because Microsoft Windows is compatible with most computer hardware. That is why, under the Microsoft Windows operating system, the vast majority of various programs and all kinds of games are being developed.

In this case, we are talking about operating systems for various PCs and laptops on which we will try to install the program. For various mini computers, tablets, e-readers, smartphones, etc. they are constantly developing special OS, such as Android, Symbian, etc. On these devices, you can install only a special program that is suitable specifically for these systems. In the future, we will talk exactly how to install the program on a computer in a Microsoft Windows system.

Let me remind you that an operating system is a joint interaction in a single shell of various programs and applications that allows a person to control a PC using a graphical interface and ensure that the necessary functions are performed. Those programs and utilities that are included in (OS) Windows are not enough for most users. These are programs such as the Internet Explorer browser, text editors Notepad, WordPad, Windows Media Player, etc. Based on this, it becomes necessary to install more functional programs.

Installing the program on a computer is quite simple.

As I said, most programs are distributed in packaged form. There is a need for proper unpacking and installation on this PC, namely, on hard drive. Installation or installation is when you unpack and place a program or utility. In most cases, it is done automatically and you do not need to know about this part. We download programs from the Internet or purchase them in specialized stores.

To install programs and utilities, you just need to double-click on a special file called the installer. In programs, it is referred to as setup or install. Or you need to click on the name of the program and it will begin to install. After that, just answer the questions of this program and press the key Further.

But let's take a closer look

For example, I decided to install the Wise Registry Cleaner program. It cleans the registry and optimizes the system. After I downloaded it, it goes into the Downloads folder. To get there, double-click on the shortcut "Computer" with the left mouse button and enter the "Explorer" panel. Click on the "Downloads" folder:

We will enter the window with our downloaded programs, select this software, and double-click on it.

The security system will ask us - Run this file? We will agree.

Then, we agree to the terms of the manufacturer. To do this, we need to check the box above the top line.

Then, we will have a window where we will have this program installed. By default, it will be installed in the system drive C. I recommend that you choose any other drive and create a folder in it specifically for installed programs, such as Progs. To select another drive, you must click Browse. But this is in the future, at the initial stage, just agree with the installation path and click Next.

We will open a new window where we need to click on Install.

That's it, we have the program installed, we just have to click "Finish" and the program will start. Also pay attention to the checkboxes. If you don't know what they mean, it's best to remove them.

Our software is installed. You can clean up the operating system. If you are interested in this system cleaner and want to know more about it, just follow the link Wise Registry Cleaner.

Also, many programs will require code input (if the product is paid) and the presence in (OS) of other programs (many games need a new version of DirectX, some programs need NET Framework on your PC, etc.). During the installation, a check is made for the presence of the necessary components in the system and, if they are absent, the user is notified about this. If these components are missing, the user must first install the missing items and only then install the selected program.

Some programs require you to restart your computer after installation. Next, run the selected program, go through the "Start" and select "Programs".

Uninstalling a program

To properly remove (uninstall) the program, you will need to perform certain actions and their sequence. If we remove the program from the system disk without the help of the uninstaller program, then in most cases, traces of this Software will remain in the registry of our operating system and in other parts of Windows (various system registry entries, etc.). Therefore, it is advisable to remove programs using the uninstaller program. You can launch it from the control panel ("Start" - "Settings") and double-click on "Add or Remove Programs". There we will see all the programs that we have installed on our PC.

To remove a program, select it from the list and click the "Delete" button. You can also use for these purposes programs specialized in removal such as Revo Uninstaller, etc. To do this, open Revo Uninstaller,