Motorola smartphone firmware via RSD Lite. Motorola Xoom: firmware, Russification and installation of applications Firmware for Motorola Xoom IS 4G

At the request of friends I was froze on the evening with a new gadget.

Optimized and used the following installation process:

1. Installing drivers. Unlock, installation of firmware and getting root.

Installing drivers: Drivers need to put up all the next actions performed !!!

All run on behalf of the administrator !!!

(Set in the following order: 1. Motohelper_2.0.49_driver_5.0.0 2. USBDRIVER (1) (it is installed through the device manager if it is exclamation point On an unknown device or will be contained in the name ATB or MOT device), click Update the driver, then search for this computer, select the driver from the list of already installed, specify the path to the driver, for example: G: \\ USBDRIVER (1) \\ android_usb.inf).

Do not forget about the tick in the XOOM settings on USB debugging, the program actually will remind the program before starting the process directly. The process proceeds almost independently need only to be convinced of the correctness of his actions, turning with constantly pop-up tips at every step.

Getting ROOT made using the program: rootmyxoom.03.exe Run the program, follow the instructions.

everything is done here, with almost one click. + Follow the instructions that appear on the device's screen.

2. Installing applications. To do this, used Program: Auto-APK Installer

all the files you want to install with the APK extension are shown to the folder with the unzipped program called Place-APK-Here

after that, run the excess Auto-apk installer.exe

click everywhere OK and yes. After confirming that your device is connected, the process will continue automatically.

after installation, all completed (installed) packages can be found in the program folder, it is called Installed, the files that remained in the PLACE-APK-HERE folder were not installed. You need to re-run auto-apk installer.exe so that it will determine all the programs. (Device is on all the time during installation.)

3. Using the program: jp.co.c_lis.ccl.morelocale.apk

Install through the AUTO-APK Installer described above. Run on the device, choose Russian. Russified, the truth is not all, for example, the settings on my sample remained unchanged English.

Who is friendly with English here on the manual with a video on this topic (everything is done on the video manually).

Collected the archive, everything can be useful in it to achieve the desired \u003d)

List of files attached to the archive, because Tortured to collect everything you need according to the immense open spaces and broken links, everything that is invested in the archive was used in person to obtain results:

Folder 01:

instalpk.

Motohelper_2.0.49_driver_5.0.0.

uSBDRiver (1)

XOOM_MANUAL-DL

Xoom folder: (Contains the rootmyxoom.03.exe program)

Folder 02:

AUTO-APK Installer

Rusifier folder:

jp.co.c_lis.ccl.morelocale

Use in accordance with the folder hierarchy. Those. in order \u003d)

Motorola devices are firmware with RSD Lite. The process is the same, but depending on the model, adjustments are made in the process. Consider this in detail on the process of firmware of the smartphone RAZR M XT907.

RSD Lite - Motorola tool for installation software, downloads only official firmware And not suitable for third-party modifications. The program checks the region of the device and will not allow European or Asian firmware on the American smartphone, and vice versa. In addition, in most cases, it is impossible to lower the firmware version or certain partitions (except for the unlocked loader).

Preparation

Specify the device model, guided by information in the "About Phone" section in the settings. This will help choose a correct file and avoid problems in the process.
Decide which type of firmware you need. In the end of the file name, the CFC and 1FF combinations are contained, they do not differ in their structure, with the exception of the firmware file.
- CFC - when firmware, all information from the phone is erased (stitches from scratch).
- 1FF - intended to update and does not affect the internal memory data
Download the firmware, but first make sure that the disk space on a computer is at least 2 times more than the firmware itself weighs.
Download and install from the official Motorola driver page, as well as the RSD Lite program by reference. Drivers and program Be sure to download the latest version.

Important! For safety reasons, RSD will prevent the installation of inappropriate firmware, but exceptions occur, which can damage the smartphone. As you follow, prepare and do not make hasty actions.

Preparation for the firmware

For security purposes, remove SIM and MicroSD cardMake data from internal memory.
Make sure the battery is charged at least 75%.
Unpack the firmware you downloaded if it is in the archive.
Inside the extracted folder contains an XML file, open it wordPad program or notepad. In the code that appears, delete the lines, this will avoid software damage to the device:

Look for in keywords - TZ and GPT.

Also, if you have a device from the American operator Verizon, deleting a string Solim possible error When flashing. If there are no lines, follow the instructions below.

Important! Installing the official firmware Motorola is the same for all models. In some cases, pre-editing is required. xML fileand sometimes not. The instruction describes an example of improving the firmware Motorola RAZR M XT907 with Android 4.1.2 to Android 4.4.2. This does not require unlocked boot, and to lower, for example, android 4.4.2 before Android 4.1.2 - the unlocked loader is required. Then from xml android firmware 4.1.2 Delete the following lines:

Whether and what codes need to be deleted to your model, specify on profile forums.

5. We make a reset to factory settings or delete cache and date in recovery mode. To get into the recovery (recovery mode), turn off the machine, simultaneously clamp the power and volume buttons, keep until the logo with the text at the top of the screen appears. We find the desired item, shifting the volume button down (scrolling cyclic), the selection is carried out with the up key. In a new window (with a lying green robot) simultaneously clamp both volume keys. In the list of actions that appears, clean the cache and data.

6. We translate the smartphone to the firmware mode through RSD Lite, for devices until 2013 do it manually, in other cases RSD will do it yourself. The sequence of actions is the same as in the previous paragraph, just select the AP FastBoot.

Firmware via RDS Lite

1. Connect the USB cord into the connector on the rear wall of the computer, do not use USB hub or extension cords, use only original cable or high-quality analog. Close all background programs, make sure that the computer does not reboot in the process, and the cord is tightly inserted on both sides.

2. Run RSD Lite, in the "FileName" field, insert the path with the location of the firmware or look for it when you press the button with the Troyaty. Click the Show Device button to update the list of models. Below, in the left window, information about the connected device is displayed, in the right of the selected firmware.

3. If everything is in order, press the "Start" button, after which the firmware starts. From now on, in no case, do not touch the phone, do not perform any actions on the computer.

4. We are waiting until the files are downloaded. Most of the time will take the "System.img" firmware (3-5 minutes). In the process, the smartphone will reboot 1-2 times, do not be afraid.

5. After graduation, the system will start on the smartphone itself (the first load of 1.5-2 times longer than the subsequent), and the Pass will be written in the RESULT column. If you still have "in progress ...", do not touch the device for 5 minutes, and then disconnect.

6. If necessary, make a reset to factory settings (recommended).

If the firmware failed in the "Result" column, "FAIL" will appear. Description Causes of Error in Log filewhich is located in one folder with RSD Lite. Open and inform the error on the profile forum to help you understand the problem.

And the article Getting Motorola Xoom will help you!

What is root?

For those who only became a newcomer or is not an expert in the huge world of Android and is not particularly familiar with the concept of how - Root Android And also why it is needed, what can be done after receiving root rights or as a consequence to get rid of them if they are no longer needed, all this can be found from the detailed article -!

Primarily!

In this article there is no "left" links or not necessary actions! If you really need root rights, then read carefully and take step by step, this is a guarantee that you will do everything right! This article on obtaining root rights is divided into two parts: the first part is Required components and conditions, the second part is Instruction how to get received files and programs root rightbut. If in the process of getting root android rights Constantly reboots or in the eternal load process (it happens extremely rare, but still), it is worth it. Now let's get to get root rights!

Android manufacturers sometimes produce new firmwarewhere it is impossible to get root one of the proposed ways if the article still has alternative methods, try them. Can't anyway? Specify the version of Android and the firmware version in the comments (you should not write evil shoves, you do not put anything or others). Hang android (not loaded), read and reread from the very first paragraph, all the necessary links are present in the article!

Have questions?

Have questions left or can not get root rights to your Android? Leave comments that you have it happened or did not work out, or you did otherwise.

Necessary to get root rights

Attention! To get root rights you need to unlock the bootloader, which will lead to an imminent loss. personal information And other data, back up.

1. Computer or laptop (Windows XP / VISTA / 7/8 / 8.1)

2. Non-damped USB cable

3. The charge of the tablet is at least 30%

7. Download Firmable Archive-UpdateUpdate-SuperSu.zip and Move in memory of the tablet

Finding Root Motorola Xoom Instructions

(BOOTLOADER unlock)

1. Connect the tablet to PC

2. Run the AdB Run program and go to the menu Manual Command. -\u003e ADB.

3. Enter the command:

adB Reboot Bootloader.

4. Tablet Restart Bootloader mode

5. Enter the command:

fastBoot OEM Unlock.

After that, take the tablet in the hands and press the volume button up to confirm

6. Enter the command:

fastBoot Reboot-Bootloader

(getting root)

7. Previously downloaded file recovery-Cwm.img. Move to folder C: adbprogbin.

8. In the AdB Run program, enter the command:

fastBoot Flash Recovery Recovery-Cwm.img

After which the CWM Recovery will be stitched

8. Enter the command:

fastBoot Reboot Recovery.

9. Tablet Restart on the RECOVERY menu

10. From the RECOVERY menu firmable archive-updateUpdate-SuperSu.zip.

11. Reload the Motorola Xoom and Root tablet!

Decided to reflash your smartphone? Rootgadget will tell how to update the firmware on Motorola Xoom 2 safely. We wrote detailed instructions for you.

What to update the firmware on Android

All are guided by different reasons.

Problem with frontal or rear chamber.
Bad response display on pressing.
I want to view new Android PIE 9.0.
Tired old android version, I want to expand functionality.
The phone does not want to turn on.
The phone stopped charging.

First you need to download the firmware by selecting one of the options below. Together with it in the archive, the necessary set of programs (TWRP and others).
Next, unpack the archive and find the file "Instructions_rootgadget.txt". Unpacking the archive can be performed by any archiver (7zip, WinRAR and others).
Lying zip. archive The firmware file must be downloaded to the memory card or in the memory of the smartphone.
The rest of the information and the sequence of actions, see the text instruction.

Motorola Xoom 2 Firmware

Choose what you like, but it is best to download the most modern versions, there is more optimized power consumption and other joys of life.

Android PIE 9.0 - You can say the flagship OS, but a little more unfinished
8.0 Oreo is an excellent option, minimum bugs and rich functionality, but 9 version of course better.
7.0 Nougat is a stable version in all respects, it works even on low-power hardware.
6.0 Marshmallow - 5 and 6 version - this is already a real older, although once there were a top of progress. But if you go to them from 3 or 4 versions, then of course the difference is very noticeable.

ROOT rights

If you wish to get root access can use the universal program RookThp Pro 2.4., Website address: rootkhp.pro.. Investment on the use of the program can be found. And also from universal can advise Zykurot. version 2.2. You can find out information about it on zykuroot.info
We will not talk about more popular programs, the same Kingo and Framaroot is always on a hearing, although they take a little passing positions