Iphon 4 picked on the iTunes shoelace. IPhone does not turn on and asks to urgently connect it to iTunes, how to be

Owners of devices such as iPhone, iPad or iPod Touch. They may encounter one unpleasant problem - hanging iTunes when connecting the device. The reasons for the occurrence of this phenomenon, as well as the ways to solve this problem will be discussed below.

The reasons

Causes of freezes may hide in:

Solving the main problems

Let's look at each of the above cases and ways to eliminate this problem.

Software Update

If iTunes hangs when connecting the iPhone, then the first of possible causes There may be an error in software. It may also occur if the device for a long time Not updated and no longer able to correctly display new versions of the program.

In this case, you must perform the following actions:

• using the center windows updates, set the latest software versions for your computer (recommended only for official assemblies);
• update the iTunes client by downloading it using Apple update or downloaded the latest version from the company's official website.

Video: Restore iPhone 5 through iTunes program

Disable automatic synchronization

Also may also be associated with the automatic synchronization process. When this problem occurs, it must be turned off.

This can be done as follows:

After that, reconnect the device. If the problem no longer appears, it means that its reason was a specific type of content. What should we do in this case?

To completely eliminate the problem you need:

Disable podcasts and external modules

Sometimes it leads to hang a large number of saved podcasts. To eliminate the problem, it is enough to delete them by highlighting the releases in the list and clicking "Delete". After that, you need to restart the iPhone or iPad, re-connect to the computer and try to enter the program.

Other ways to get rid of problems

In the event that previous solutions of the freezing problem did not help, it is necessary to check its presence when connected to another computer:

Attention! In the test, the PC must be installed latest version iTunes programs With all the updates.

Repeat problems with a new account

To check if the freezing is repeated when using a new accountWe will need to start it to start it:

Note! To resort to the restoration of the factory settings of the device only as a last resort. If it is recognized on another computer, you first have to try other measures.

If nothing else remains, except to produce full backup Devices, it is important to take care of the following:

With a new account, the device works fine

What if after creating a new account, the problem disappeared?

In this case, we need to restore performance:

1. restart the device;
2. go to the program using an old account;
3. create a new media library;
4. check for error.

If the problem is resolved, we complete the work of iTunes and return previous version Mediamatka, making the following:

• re-run the program while keeping the "SHIFT" key;
• in the menu that appears, select and restore the library file used earlier (by default it is in the "My Music Music" directories).

We looked at the most common causes leading to iTunes hangs when it starts. Follow simple instructionsThe user without much difficulties will be able to eliminate this problem himself. If you have questions or comments - use the comment form located under the article.

Owners of devices such as iPhone, iPad or iPod Touch may encounter one unpleasant problem - iTunes hang when the device is connected. The reasons for the occurrence of this phenomenon, as well as the ways to solve this problem will be discussed below.

The reasons

Causes of freezes may hide in:

Solving the main problems

Let's look at each of the above cases and ways to eliminate this problem.

Software Update

If iTunes hangs when connecting the iPhone, then the first of the possible causes may be an error in the software. It may also occur if the device has not been updated for a long time and no longer capable of correctly displaying new versions of the program.

In this case, you must perform the following actions:

• using the Windows Update Center, install the latest software versions for your computer (recommended only for official assemblies);
• update the iTunes client by downloading it using Apple update or downloaded the latest version from the company's official website.

Video: Restore iPhone 5 through iTunes program

Disable automatic synchronization

Also may also be associated with the automatic synchronization process. When this problem occurs, it must be turned off.

This can be done as follows:

After that, reconnect the device. If the problem no longer appears, it means that its reason was a specific type of content. What should we do in this case?

To completely eliminate the problem you need:

Disable podcasts and external modules

Sometimes there is a large number of preserved podcasts. To eliminate the problem, it is enough to delete them by highlighting the releases in the list and clicking "Delete". After that, you need to restart the iPhone or iPad, re-connect to the computer and try to enter the program.

Other ways to get rid of problems

In the event that previous solutions of the freezing problem did not help, it is necessary to check its presence when connected to another computer:

Attention! The latest version of iTunes program should be installed on the PC tested version with all updates.

Repeat problems with a new account

To check whether the hang is repeated when using a new account, we will need to start it:

Note! To resort to the restoration of the factory settings of the device only as a last resort. If it is recognized on another computer, you first have to try other measures.

If nothing else remains, except for making a complete device backup, it is important to take care of the following:

With a new account, the device works fine

What if after creating a new account, the problem disappeared?

In this case, we need to restore performance:

1. restart the device;
2. go to the program using an old account;
3. create a new media library;
4. check for error.

If the problem is resolved, we complete the work of iTunes and return the previous version of the library by making the following:

• re-run the program while keeping the "SHIFT" key;
• in the menu that appears, select and restore the library of the library used earlier (by default it is in the "My Music \\ iTunes" directories).

We looked at the most common causes leading to iTunes hangs when it starts. Following simple instructions, the user without much difficulties can eliminate this problem. If you have questions or comments - use the comment form located under the article.

The iTunes cord and icon on the iPhone screen can suddenly appear during the iOS firmware update. Such an error means that in the installation process was interrupted with the Internet or on the phone there is not enough memory to install additional components.

If after iPhone updates asks to connect to iTunes, you will not be able to use the phone in as usual mode. The device stops responding to an attempt to enable and start the desktop. Consider more detailed how you can easily eliminate the update problem and restore the phone.

Among the causes of the error can be allocated as follows:

• Incorrect installation of a new firmware;
• Sudden shut off the cord in the process of updating the phone via iTunes;
• Error trying to install jailbreak;
• Wi-Fi module shift or shift.

Standard ways of recovery

If you encountered a software malfunction, first try to restart Recovery Mode. The fact is that the image of the cord and iTunes icon means that the recovery mode is launched on the iPhone, however, due to software error It can not be completed. Hold the HOME and POWER buttons at the same time for 15 seconds. Next will be re-enabling the phone, and the error will disappear.

K. backup. For this method you need to perform connect iPhone To desktop application iTunes.. Next, open the Main Program window and in the Restore field, roll back the phone to the backup preset. It will take 15-20 minutes.

In most cases, all the reduction methods presented above will be able to eliminate the error and will occur. automatic reset iPhone. However, there are several more reasons why iPhone asks to connect iTunes.

Exit from Recovery Loop

The cable and iTunes sign can mean not only the active recovery mode, but also the "Eternal Cycle" attempts to make the same recovery, that is, Recovery Loop. In the second case, the phone is not so easy to derive from this state, because instead operating system Smartphone reloads the error screen.

You can exit Recovery Loop using the Tiny Umbrella utility. After installing the application to your PC, you need to connect the iPhone to the computer. The utility automatically recognizes the connected device. Then follow the instructions that are displayed in the main program window to complete the setting. Another application that eliminates the infinite Recovery Loop is redsn0w. Connect an iPhone to PC. In the main window RedSn0W, click on Extras - "Recovery Fix".

Breakdown Wi-Fi chip. What to do in this case?

If all the methods described above did not help you solve the problem, we can say that the iPhone is damaged wi-Fi module Connections. During an attempt to activate the operation of the device, the system cannot find Wi-Fi. Next turns on the recovery mode and the connection window to iTunes.

To eliminate a malfunction, you can perform a calcination of an existing chip. Remember that poor-quality work can lead to a breakdown of more important components of the phone, for example, a central processor.

It is impossible to replace separately the chip, since immediately after the first attempt to turn on the iPhone phone will not be able to identify the authenticity of the part. As a result, you will receive non-working "brick", which can no longer be restored. Only effective method Repair - replacement motherboard On iPhone.

Any instructions for independent iPhone repair can be found on our website, or make a challenge of a specialist for At any place convenient for you.

Users of smartphones and other mobile devices From the company EPLs may encounter a situation when the iPhone hangs on the lace. Most often, if the iPhone hovers and the iTunes program logo appears on its screen, it means that the device is running the firmware recovery process. In this case, it is enough to wait some time until the iPhone updates the software, it will restart and will work again in normal mode.

However, there are situations where the iPhone is hung, the iTunes program logo, USB cable and in such a state of several hours appeared on his display. In order for you to cope with this problem yourself, we analyzed the common reasons for its appearance and ways to eliminate.

IPhone hangs on the lace in the usual recovery mode

The main reason for the iPhone hung on the iTunes lace is updated software. If before the iPhone hangs on the Lace of Aytyuns, you installed new software products, then to solve the problem you can do the following:

• wait until the firmware restoration and the iPhone reboot
• forcibly withdraw a smartphone from the firmware update mode

In order not to wait when the firmware update end itself, use the hard restart of the device. To do this, press the HOME buttons simultaneously and hold on / off. After these steps, the iTunes program will disappear and the iPhone functionality is completely restored.

Why is an iPhone hanging on a shoelace?

The reason why the iPhone hangs on the shoelace and the iTunes program icon appears on its screen, it may not only be in software updating. There are other breakdown options, to eliminate which follows differently. It is possible an iPhone hanging on a lace and issues errors for the following reasons:

• software crashes - to eliminate the error, you need to install a new licensed firmware on iPhone
• processor failed - if the iPhone issues an error, hung on the Aytyuns lace and does not respond to the reboot command, then the processor repair is required
• IPhone hung on the Lace of Aytyuns because of the strike - determine which item broke and requires replacement, only by professional diagnostics
• the iPhone power management microcircuit is damaged - due to hitting or wetting the phone, the loop breaks, so the phone first gives an error, and then discharges completely

If the phone is discharged and does not turn on, the usual flashing may not be enough. Find the exact reason why the iPhone was discharged and not charged, it does not turn on after the firmware is restored or an error message appears on its screen, experienced masters will be able to.

Professional repair of smartphone

If you could not independently display the iPhone from the software update or restore mode and the USB cable is still on its display, refer to the experienced masters registered on Youdo. Professional setup, repair and flashing of an EPL smartphone by private owners is performed promptly, while you get the following advantages:

• free diagnostics when ordering subsequent repairs
• setting, flashing and repair iPhone at a convenient time you
• replacing the loop and other parts is performed using original spare parts
• for all work performed, experts give a guarantee

If you do not have experience independent repair Smartphones, as well as special tools at hand, do not risk and refer to professionals. An experienced master will determine why the iPhone hangs on the shoelace, and will repair the device in a short time.

Do you have an iPhone turning on and asks iTunes? Well, what is here, in the life of the users of "apple" techniques, no situation occurs. We will drown the device, and it does not turn on, the screen will break, and then in general, incomprehensible cases are. One of these problems happened to the device called iPhone 5S. Namely: the phone was delivered to the service, the problem was that he did not turn on. When you try to enable on the screen, a cable appeared with the iTunes icon. As repair specialists say: "hung on the shoelace."

So what to do in such a situation?

It is necessary to figure out in detail that with the phone, because he could simply hang and throw off the firmware, a problem with the board of the apparatus itself could also occur, so the first thing you need to try is the firmware of the device. Make it just enough if you act in steps:

1. Download the current version of iTunes.
2. Download the required version of the OS.
3. In the off state, connect the gadget to iTunes.
4. Click the "Home" button, press and hold the power button in 5 seconds. This operation takes about 10-15 seconds.
5. Next, iTunes must find the device and displays the corresponding icon.
6. Press and hold the "SHIFT" button, then choose "Restore".
7. In the window that appears, select the desired firmware (file.IPSW)
8. Select the firmware file and click "Open", then you should wait until the installation process is completed.

If a window appears in the firmware installation process, an error number 9 appears. This error means problems with the nind flash chip, that is, the microcircuit is in non-working condition. Most often, when you hit, it can simply "fall off", that is, the rolled balls on which it holds, fall off and the connection with the board is interrupted. In this case, the NEnd flash iPhone transplant is required. If there are special equipment and primary means, the master makes this operation for 1-2 hours.
Step-by-step reinstalling the chip looks like this:

1. It is required to conduct a complete dissection of the device:
A) Turn off the phone.
B) unscrew the lower two bolts.
C) carefully remove the module.
D) unscrew the protection with the module and battery connectors.
E) disconnect the module and battery.
E) Next, remove the fee, reloading all the guides and holding bolts.
G) Remove the protection from the board using a hair dryer and tongs (it keeps on a number of latches from several sides, take off gently).

2. With the help of heating (hairdryer, the temperature should be 340-370 degrees) and the scalpel inserted under the chip after heating, it is extremely gently to remove the nind flash chip.

3. Clean the chip from the old compound the compound (thermoplastic polymer resin) chip and fee on the site of the chip using the same hair dryer and scalpel.
4. With a special stencil, liquid tin (PPD) and a hair dryer, when heated at 330 degrees rolling the nind flash chip and sits in place.
5. After all these operations, the board needs to be cooled. To do this, it is best to leave it for 10-15 minutes alone, at this time having prepared the battery, the system of the system time and the module for verification.

6. Connecting the battery, lower loop and module, connect the phone to DFU mode To the computer and re-flash. If it is flashing, the microcircuit is transplanted correctly and now the device is ready to use.

7. If everything works and everything is done correctly, and according to the instructions, then the iPhone should be collected by following the reverse order of this Instruction.

This work is done by the repairman, transplancing the chips on the Iphona board. Upon receipt of experience in this sphere, skill on point technically complex repairs is added every day. The main thing is to have such qualities as an idolism, because it is necessary to face small-scale operations.