When you acquire a new smartphone or a tablet, the question arises how to back up Android data applications, photos, contacts and other information. First of all, users are set to find the appropriate program that will do it. But not all newcomers in possession of devices with the Android system know what its subtleties that allow you to restore the installation on the phone programs, photos, etc.

If your smartphone has become buggy, works at a slow speed, then, most likely, you have already followed the advice of acquaintances and made a return to the factory settings. Although there is such a situation when you just bought the device and want all programs, snapshots and contacts on it. But a lot to transfer at the expense of the staff of the OS does not work, if you do not resort to installing additional character applications.

Backup goals

In our article you can find out not only how to make a backup copy on Android, but also that is this task, its main goals. The only condition, you still need to know the Google account data. To do this, go to the Go to Settings and Accounts and Synchronization menu. It will also be important to know how to disable backup if necessary.

Modern world is full of information. It is more valuable than the carrier itself is usually. If the smartphone fails, like a memory card, then with an annoying fact you can reconcile and buy a new one, but the unlimited loss of information can lead to serious problems. Just think that you will lose all contacts on the work, which I had to work for many years. Basic activities will depend on them. The loss is simply impossible to compare with what you remained without a gadget.

Moreover, due to the backup option, you can quickly transfer information to a new smartphone. Apply standard means of the Android or utilities for backup from third-party developers. It will not be necessary to the user on the new device to re-install the necessary applications, to carry out their setting for themselves, engage in contacting contacts, photo or calendar schedule.

Backup storage location

Android can store a backup to Google in the cloud service or application developers servers, which is used to create a backup.

Backup applications allow you to save a backup on the microSD memory card, the internal memory of the device. But note that the option is not the best. In the event of a memory card breakdown or phone loss, the backup will also be lost.

A backup file to move better on the hard disk or copy it. It can also be done on the card that was decided to connect to the PC.

Data backup: How to perform an operation at the expense of own android OS

To fully use the Android device, you need to have an account in Google. He has a lot of options, but one of them is related to providing backup saving user data in Google service contacts, disc, photo, notes, documents.

Bacup with the help of Google is done in accordance with this algorithm:

In the settings on Android, find the section "Restore and Reset". Click on it.

Turn on the "data backup" by clicking on the switch so that it moves to the right side.

Return to the previous screen with the settings and open the section that received the name "Accounts", it is worth choosing Google.

Click on your account name and select those data that you want to turn on the copy. The noted will be stored in the Cloud service from the company Google.

This option is convenient because the settings do not worry about the safety of the contacts that may be lost if the device has breakdown. It will be enough to go on another machine to the account to synchronize the saved information earlier.

True, Vatsapandroid will not save the message history in Messenger and on the phone itself, the call log and the application settings that you use. Also note that in the latest versions of the Android, there is no possibility to receive a backup file to store it on another carrier. To obtain a complete backup, special applications will be used much more convenient to use, which in Google playlessly a huge amount. You should only decide on them.

To this end, you need to enter "Backup" in the paging line. Google Play will bring a large list of applications that are distributed in accordance with the largest number of user reviews, which amounted to ratings.

Backup in Android OS with Super Backup

So, first is necessary to download the SuperBackup application, to do this, visit Google Play. When you open it, it will display the settings on the autopheck schedule. If there is a desire to do everything manually, then give up its applications. You will see the corresponding button in front of you.

Open settings. Press images of 3 vertical points that can be seen in the upper right corner of the screen by clicking on the item called "Settings".

Specify and storing a backup file that you want to determine in the settings. The path to it can be specified by means of internal memory or an additional card. Press the "View" button that opens a list to determine the specific folder. Finishing with the name of the backup storage location, press the "OK" button.

Switch to the main application screen. Choose the desired type of information. It can be SMS, call log, applications, etc. Click on the Save button to create a copy.

To restore data from the backup file, press the Restore button. Specify the backup file that will run the process. It should be noted that SuperBackup is able to save a backup in the cloud service Google Disc, which is to get rid of the need to occupy a place in the device's memory. Those. This will ensure reliable backup security.

Backup Android to Computer

Wanting to make backup to Android PC, without creating a backup or configuring google account, use the ADB RUN utility. It is in free access and does not require payment. But note that it is necessary to include debugging

USB on smartphone, and install drivers for it on PC. They must match the model that will be connected. If this is complied with, you can move back to the backup.

Nothing is forever, and, oddly enough, various mobile gadgets and devices including. Did you come across at least once with the situation when your phone turned out to be in the hands of third-party persons (simple theft) or simply crashed at speed or from the roof of the building? In 50% of cases, it is possible to restore data, because the SD card remains in the preservation or memory of the phone is not damaged, but you have to pay huge amounts of money (from 1000 to 10,000) for restoring information in various service centers, and no one guarantees you 100 % Data Return.

What to do in this case? Any user, ahead of events, can predict such a situation and make a backup data in advance. Even if during the period of time between the last backup and the loss of access to the phone will pass, the percentage of lost information will be minimized. We will tell you how to make a backup android, which methods for this are provided and with which frequency need to perform similar operations.

Why need backup and what means to use

Bacup implies the creation of a copy of certain information on any device, system. In this material, we are talking about the Android operating system, which is installed on smartphones and tablets. Not only SMS messages or contacts, calendars, but also all applications and programs installed on the phone can be stored in the copy.

To make a backup, you must first decide what exactly you need to save. For Android there is a huge number of ways, each allows you to make backup data without any problems. In the article, we describe the main ones and indicate, to work with what data is the most suitable for one way or another.

Backup contacts, SMS, calendars in android

Suppose you need to make copies of only contacts or with them still standard text information, such as calendars, call log, etc. For this suit such ways:

• Standard contact sync in Google
• Specialized programs, such as Super Backup, Helium

The process of synchronization of contacts we described in the article -.

With programs that are specified above, any user can work without any problems. In the Google Play service, they are provided free of charge. The described method is suitable for those people who need to make backup without applications and games!

Full Backup data in Android - Popular Methods

If you decide to make a complete copy of the information on your device, including applications and games, you can use the standard tools of the operating system or install an additional program that will create backup data from the specified parameters in a few minutes.

Here is the main list of tools for work:

• Standard android settings
• Recovery mode
• Titanium Backup program (Root-right to device is required)
• SAFE Backup program (ROOT rights are not required)

Creating a backup of android through system settings

Few people know, but in the android there is a standard functionality to create copies. And so, the procedure for action is:

1. Open the "Settings" of the phone and select the All Settings tab. Next, find the "Restore and Reset" item. In some Android versions, this item is located immediately after settings.
2. You will find a standard control menu in which there are about a dozen tab for data management on your phone. We are interested in the "Backup" item. Specify the name for the future file with copies.
3. Next, in the menu that opens, select All Data Types to be saved. Note that in addition to the applications (full list of games and programs) you can copy also SMS, which is very important, contacts (although Google synchronization is available), call lists and much more.
4. Mandatory at the bottom of the window, select the location where the data will be saved. If the SD card is installed on your phone, the backup can be saved there. As soon as the copy is created, it will be possible to transfer it to the computer, send by mail, transfer to Bluetooth.
5. Attention! To publish this copy, select "Data Recovery" and follow the system prompts.

Creating a backup via Recovery mode

In the article "" we told how to go to Recovery mode on most devices (Key combination, volume up, loudness down). See material and basic combinations, go to this mode.

1. Suppose you went to this mode. You will appear on the screen in which you want to select the Backup and Restore tab.
2. Next, click on the Backup menu item, after which it will be necessary to wait from 5 to 30 minutes, depending on the number of information on your device and its system characteristics.

Creating a backup application to Titanium Backup

This is a universal tool for working with backups. With this program you can not only create, but also restore any backup on your device. It is only worth considering that this application requires root rights!

The program is provided in two versions: free and paid (from 247 rubles), however, the first option will be enough for standard operations. All files are saved to a single ZIP format file that can be transferred to another device or save on a USB drive.

To make a copy, follow these steps:

1. Download and install Titanium Backup from Google Play. The program has many linguistic packages, including Russian.
2. Open the program. There will be a notification of the presence of root rights. Allow the application full access to data. We recommend that you carefully read each item in this software, because settings here are a lot, as well as additional menu items, so it's easy to get confused by an inexperienced user.
3. Select the Backup Copies tab. The system displays a complete list of applications and next to them icons. If the icon displays a triangle with a question, then a copy of this program has not yet been created earlier. It also displays the icon and the location of programs and games.
4. Select all applications that need to be purchased in Backup. Next, click the "Save" button. All saved programs will change the icon next to the title with a triangle on a cheerful emoticon.

It was described the process of creating copies specifically for applications! To restore them later, you will also need Titanium Backup. Only this time you will need to choose a full or partial list of applications, checking the checkboxes and click the Restore button. Recovery is available in several modes:

• Only data from programs (for example, if you have installed applications).
• Only software (if you are missing programs).
• Software + data (full recovery of copies of applications with all data).

Creating a full copy of the data in Titanium Backup (in the paid version)

The difference between the paid version from the free thing is that in the first version you will be available for additional options for creating copies. In addition to applications, it is possible to save system data, user software, check copies and much more.

After buying a paid version, you will have an additional item for managing all processes. Believe me, the price of 247 rubles is the minimum loss for you if the information is really important.

Creating a copy of android in the Safe Backup program

Almost all programs to create copies require root rights. But what to do a person if he does not have such access? In this case, we suggest you use the Safe Backup tool. The program is distributed free of charge, has only a few items in the menu (which is very convenient) with the Russian interface.

1. Download and install the application on Google Play.
2. Open the program and select "Save".
3. Next, specify a complete list of information that will need to be thrown into the backup.
4. Specify the place on the map or the phone where the copy will be stored.

To restore the previously created backup you will need to click the Restore button and specify the version of the file.

conclusions

This is not a complete list of possible ways to create a copy of Android, but they will be fully enough to preserve, at a minimum, 90% of the most important information.

And one more important advice! All applications are saved for your account on Google Play. If you are not important data (settings, progress in games), then the copies can not be created. It will be enough to go to the Play Market and restore previously downloaded programs and games. All data for authorization will have to be proceeded.

Backup copies are often indispensable. There is nothing worse than losing all valuable information on your phone or computer and then find out that you never created backup copies of your smartphone valuable data, photo albums or documents.

Experienced users are advised to always make a backup before installing the root rights or a new ROM firmware. The reason is simple: some actions require resetting settings and, therefore, erase your data, so it is better to move them to another place to be able to restore them.

So, here are some ways to make a backup of Android.

Google backup

As you probably know, Google is always ready to help protect all your applications and data, and you can use this by completing some simple steps:

1. Go to settings.
2. Open the " Reset and backup».
3. Next, find an option to back up the data of the desired type (including Wi-Fi passwords, settings, application data).

Remember that all this will be associated with your Google Account, and you can select the automatic data recovery option when you re-install the application.

Backing up the application data using Google account is one of the easiest ways.

How to make a backup of everything using software tools: Mobikin Assistant

You never know when you can accidentally delete something valuable. Consequently, the backup of your data is absolutely necessary, and we are confident that many of you have passed this difficult path. This concerns not only the case when you have lost your phone - installing updates sometimes can also lead to the loss of your data.

An easy way to provide backup your data is to use the Mobikin Assistant for Android application, which exports everything, including contacts, text messages, applications, photos, music, video and much more in their original format and quality.

Mobikin interface is convenient for the user.

If you just want to get the desired result, this application will reach it without any problems. All you need to do is download Mobikin Assistant from reliable sources.

After downloading and installing the above on your device simply follow the instructions, and soon your data will be securely saved, and, plus, a certain amount of internal memory of your device will be released.

Are you a iPhone user? Mobikin also has an assistant for iOS devices. If you need to make a backup of your iPhone or iPad, try Mobikin Assistant for iOS.

Manual backup with PC

If you do not want to trust the work of third-party software, there is always a "DIY" method.

1. Connect your phone to a computer using a USB cable.
2. Open the Windows Explorer window and go to your device.
3. Here you will see a number of folders, including photos, videos, music and documents.
4. Go to each folder and copy / insert the material you want to save to your computer for safe storage.

This is a pretty comfortable thing, even if you have other backup solutions, because there is no such thing as too many backup copies. If you want to gain access to backups in the future, you will need to seek help to your PC.

Super easy way to make a backup of your phone.

Backup application (for phones with root rights)

If your phone is already endowed with root-rights, then there is no better backup solution than Titanium Backup. This application allows you to create backup copies of absolutely everything on your phone. A full backup can be restored at any time, and you can configure backup on a schedule so that you have a regular "snapshot" of the contents of your Android phone.

Titanium Backup in many ways is the Gold Standard for Android backups.

Backup can be performed, without even closing the applications that you use at the moment. They can be saved in the form of quick zip files. Titanium also allows you to easily transmit files between the SD card and the phone.

How to make a backup of everything on Android using Titanium Backup

• Download the Titanium Backup application on your Android device with root;
• run the application and provide it with superuser privileges;
• after that, you will be asked to familiarize yourself with the statements about the refusal of responsibility, etc.

Important moment: on your phone should be enabled "Debugging by USB".

In Titanium, you will see three tabs. The first is the tab "Overview" with information about your device, the second - " Backup / Restoration"Where all fun things happen, and the third is to plan a regular backup:

• click the " Backup and restore»;
• after that you will see a list of contents of your phone along with icons that indicate whether copies were made;
• triangular warning badges mean that you have no backup, emoticon icons speak for themselves.

The "Overview" section provides information about your device, and the most interesting item is "Backup and Restore".

• If you want to back up system data or applications, tap a small document with a mark at the top. This will lead you to the list of batch actions;
• then click on the icon "Run" next to the action you want to implement;
• if you wish to back up your applications, click on the icon "Run" next to the inscription " Backup all user applications»;
• are you planning to back up system data? Then click on the icon "Run" Near " Backup all system data».

Batch actions give you the ability to create backup copies of applications, data and more.

When you run all the above steps, Titanium will launch the backup process. This may take some time.

Upon completion, the backup will be marked with the date when it was performed and saved. You can also create a Update.zip file for firmware via Recovery, if you want, or you can restore through the Titanium application itself.

• To restore Data from a backup using Titanium, go back to package Action Screen and scroll down.
• After that in the settings "Restoration" You will see the parameters for the actions that you have completed earlier: in this case it is "Restoration all applications with data"I. "Restoring all system data."

Restoring applications and system data is equally easy.

Now you should click on the "Run" icon next to the actions you want to use. After that you will have the opportunity to restore all the backups or only some of their sections. Make your choice and touch the green tick in the upper right corner.

How to transfer backup Android copies

As you can see, depending on the methods and type of backup, the transfer of files on Android can be made in different ways. As a rule, if you used Titanium Backup or Helium, you should simply reinstall the application and copy the backup folder to the smartphone if it is no longer there.

Always transfer backups to your computer or another device outside your smartphone. Thus, you can return your files back later, without any unpleasant surprises.

Solutions of manufacturers

Some manufacturers offer file transmission services in a very simple way. This applies to, for example, Samsung, Motorola or Sony.

The advantage is that almost the entire backup process occurs in automatic mode, and the disadvantage is that data transmission is possible only on the device of the same brand. Check out the model of your device to see if you have this option.

What backup method do you prefer and why? Tell us about it in the comments.

To quickly restore lost data on a smartphone, you need to know what a backup is and how to create it on android.

With it, you will quickly return all deleted files, restore the settings for games and programs, as well as IMEI, identification numbers, passwords, and all other information that is contained on the device.

Definition

Backup is an archived backup of a phone or computer files. Bacup can be created in any operating system. Its purpose is to save all user data and setting up the system at the time of creation of the archive.

After resetting to the factory settings or forced system recovery, you can quickly return all lost data to the backup and not spend time on re-installing programs and setting up the OS.

A copy of the data is created using special programs. The most popular utilities:

• Titanium Backup;
• Super Backup;
• Nandroid Manager;
• Helium and others;
• SP FlashTools.

Varieties of backups in Android

In the Android OS, users can create a backup copy of the entire system or individual components:

• Copy of SMS messages and contact list;
• Backup of the entire system, taking into account the security settings (save all passwords of the lock);
• Backing up any selected files;
• Bacup of photos and videos;
• Copy of Google Account Information;
• Bacup for IMEI.

Why is it important to periodically create a backup?

Backup allows you to get rid of problems associated with a sudden data loss on your smartphone. Periodic creating backup will allow you to save all the settings of the operating system, as well as messages and multimedia files.

In the event of errors, to solve which you need to reset the phone settings, you can easily return all remote information. In the Android Bacup, you can create using the built-in system options or take advantage of special programs.

In what cases should the backup should be made?

1. Before updating the firmware. It does not matter if you download the new version of Android "by air" or install updates manually, create a copy of the installed OS. All photos, videos and music We advise you to move to a memory card or download this data to the cloud storage;

2. Before resetting the settings. Over time, smartphone users can observe a decrease in the performance of their gadget. This is due to the load of RAM, viruses. The easiest way to restore the device is to reset the OS to the factory settings. Before it is better to create a phonebook backup and SMS not to lose important data;

3. To reset the lock password. If you installed a password, a graphical key or pin-code and forgot it, to reset it without data loss, using a backup. The only requirement of the archive with a copy of the data must be created until the password is set.

Also, the periodic creation of a backup phone book will allow you to quickly return lost numbers in case of a sim card error or after cleaning the memory card.

What is needed to create a copy?

To create a backup in an android OS in the standard way, you will need:

• Supervent Management Rights - root must be active on a smartphone at the time of generating a copy;
• Copy storage medium - this can be a built-in memory card, any cloud storage or your computer's memory;
• A program for creating a backup. The software that works with backup copies with active root rights allows you to create a copy of all data in the operating system - from contacts to arbitrary files and settings of each program.

Another way to create backup is the use of third-party programs that do not require superuser rights. They allow you to archive only the basic data of the OS. For example, a phone book, messages associated with accounts. Create and restoring copies can be carried out using a single program that must be installed on the smartphone.

Backup software

After flashing your gadget, you get an absolutely "clean" software shell. You will not be able to return any programs, accounts and settings of their last version of the OS, if you did not take care of creating a backup.

Many users prefer to install applications from scratch. However, it is much easier to use backup and return all application settings using one archive. Restore the previous settings does not affect the operation of the OS, does not provoke bugs and errors.

Actual backup programs will be for those applications that are not in the official PlayMarket.

Titanium Backup and Helium is the two most popular programs for working with backup applications in Android OS any version. To start working with each of these utilities, the superuser rights will be needed.

To create a backup of one installed program or several species at once, use the instructions for one of the following utilities.

Titanium Backup.

The utility has more than 5 million official downloads to Play Market. The application allows not only to restore the operating system data, but also works with the software installed by the manufacturer, deletes the components and settings that the usual user can not be removed using the standard window of the settings.

The main functions of Titanium Backup:

• Configure Backup on a specific schedule;
• Moving programs between the internal and external memory without the need to close the application;
• Quick scanning for the presence of a new firmware version;
• Installation of firmware;
• Storage of the history of calls and text messages of the cellular operator;
• BACKAP BOOZER BOOKS;
• Backup of the router access point;
• Data synchronization with Dropbox cloud services, Onedrive, Google Drive;
• Assigning any system status program (option is configured by the user);
• Creating a backup archive that can be reset to the smartphone using the console;
• Synchronization of settings and application data between multiple gadgets.

Convenient transfer of settings from one gadget to another is the most useful Titanium Backup feature. If it happened that your smartphone broke, or you lost it, thanks to the backup you can easily restore all contacts and messages in popular messengers and transfer information to another device.

To transfer data, you will not need an old SIM card. All you need is the second gadget, the archive with the backup and the Titanium Backup utility. All backups created in the program are automatically synchronized with one of your cloud warehouses:

• Go to the Titanium Backup utility window;
• In the list of software installed on your smartphone, select the desired messenger or other application to create a backup of its settings. In our case, we will archive all the rooms and messages from whatsapp;
• Click on the name of the program by holding it for a few seconds. In the pop-up window, click on the "Save" field;
• Next, select the cloud storage to which the archive will be sent to the software settings.

To move program data to the second gadget or restore the settings after resetting to the factory settings, re-install the WhatsApp and Titanium Backup messenger. Open the recovery tool and synchronize the cloud utility.

In the list of all the programs installed on the smartphone, select the desired messenger, click on it and on the options menu, click on "Restore". Titanium Backup will automatically go in the cloud the desired backup and returns all the lost files to the program. You can again use all contacts and access lost chats.

Similarly, you can transfer this any other program to the second gadget. Most often, the application backup feature is useful for transferring these messengers, preserving progress in games.

Helium.

Helium is another simple and useful utility to quickly restore the device. Works on all devices, regardless of the availability of superuser rights. The only requirement is synchronization with the cloud. The utility does not save a backup to a memory card or an external drive.

Helium functions:

1. Synchronization of applications on multiple devices;

2. Bacup System;

3. Convenient explorer files;

4. Remove programs and rollback of their updates.

To create a backup copy of the installed program, follow the instructions:

• Open the Helium application. In the main window of the utility, the CARBON file conductor appears - this is a built-in service to view the list of all installed applications. Click on the desired program and select "Backup" in the action menu;
• Wait for the creation of copying. The created archive will be sent to the cloud;

To restore information from a copy with Helium, open the utility on another device. In the settings, activate the "Synchronization with the Cloud" item. Next in the main program window, go to the "Restore and Synchronization" tab.

Select the program whose data want to return and click on "Restore".

To create any other type of backup, go to the Overview tab and select one of the backup options.

Keep IMEI

IMEI is an international numerical identifier of your device. With this set of numbers, you can find the gadget manufacturer, its model and status. Phones and tablets without IMEI are considered stolen and unofficially prohibited for use in the CIS.

As a result of resetting or program errors, IMEI identifier can be lost. However, it is possible to restore it using a backup.

Signs of lost IMEI:

• After flashing or discharged to factory settings, communication problems arise (cellular network, Bluetooth, Wi-Fi);
• Full absence of a compound with GPS;
• The phone does not see any SIM card.

You can restore the identifier only with the availability of superuser rights. To return IMEI, you will need to install the Android Terminal Emulator console utility (if the phone does not see the network, download the installation APK to the computer, and then move the file to the phone using a USB connection).

Follow the instructions:

• To begin with, we will need to find out the EFS code. To do this, enter the MOUNT command and press ENTER to perform it;
• In the console window, the text appears in which you must find the EFS command written through the slash. Text identifier in front of the command and the code you need. Code search example:

• Write down the code found on the sheet of paper and restart the application. After re-starting the emulator, enter the command to restore IMEI (each of the strings must be entered via ENTER). XXXXX is a found EFS code;

• To save the IMEI settings, do not leav from the program, enter such lines:

After successfully executing all the commands, exit the emulator window, restart the smartphone and check the operation of the cellular network, geolocation and Internet connection. Everything should work fine. If you wish, you can check the availability of IMEI using the engineering menu.

Bacup photo and video

As a result, theft of smartphone or reset to factory settings, the most unpleasant is a loss of photographs, video, music and other personal data. All programs can be rented again, but the personal information is almost impossible to return without premature preparation.

Even if you are sure that nothing happens to your gadget, we recommend that you configure at least one of the ways of saving your multimedia data described below.

Use Google+ application

The standard application from Google is pre-installed on all devices from the OS android. Google+ OS - Combining and synchronizing all Google services in one account. If your device is installed on your device, the Google Drive cloud storage and the Google+ application does not mean that file synchronization is configured.

The fact is that in the mobile version of Google Drive you cannot configure the synchronization of a particular folder. Users can only through the smartphone settings to activate the automatic sending of all photos that are made on the gadget chamber.

Follow the instructions to synchronize any folder on your smartphone with One Drive and automatically send copy files to the cloud:

1. Install the Foldersync application on your smartphone or update it to the new version if the utility is already on your smartphone. The utility allows you to select any folder in the memory of the smartphone and configure it to synchronize with the cloud (link to the Play Market :) page;

2. Further, for devices with the Android0 OS and above, you do not need to allow access to all folders and files on your smartphone. To do this, simply open the FOLDERSYNC program immediately after the first installation and in the pop-up window, click on the "Allow" key;

3. To configure the automatic backup photo, video and other files in the Main Foldersync window, click on the "Create New Sync" button;

4. Then the built-in helper window opens. It is necessary to enter a name for the "Folder-Cloud Storage" pair;

6. In the horse that appears, select the ONEDRIVE cloud service or another site you want to configure binding;

8. To confirm the actions and save the settings, click on Authenticate Account;

All user data is added to the repository. What would not happen to the phone, you can always return your photos using any computer or browser.

At the selection stage, you will be asked to configure one of the following connection options to the cloud storage:

• Connection with a local folder (select if the data for the backup will be created and only on your smartphone);
• Synchronization with a remote folder (if you want to create a backup for a folder on your computer);
• The hybrid version (to create a backup of this smartphone and other remote gadgets).

In the connection settings, a schedule selection is available, according to which synchronization will occur. We recommend sending data to the cloud every day. In case of an error or breakdown of the phone, all important files will have a backup.

other methods

In addition to the Google Drive repository, you can also choose any of the services presented:

• Dropbox is the world's most popular cloudy storage. His feature is that the program is able to automatically create a photo backup of the phone and immediately delete them, freeing the memory. You can access a folder with all images at any time from all devices. It will only be necessary to connect to the Internet;
• MEGA - a cloud that provides free 50 GB of space on a virtual disk space. The user can configure synchronization with any device, download client programs for a PC and smartphone, manage access to folders and files;
• Mail.ru Cloud - after registration you will be available 100 GB completely free. Manage simple file synchronization and view in any browser.

All these cloud storages have client applications in the Google Play store and the ability to synchronize the phone data with the server through the usual program settings.

Create backup of any files

In addition to the above-described options for creating a backup photo, music, video, users can download such programs to work with backup copies of documents of any formats:

• Datasync;
• Dropsync.

Datasync.

The application works by analogy with the additionersync discussed above and allows you to create a backup of any information that is stored in the internal or external memory of the device (with the exception of installed programs and system settings).

Also, DataSync allows you to configure the sending backup from one device to another via Bluetooth connection, which is convenient to the moments when you need to save important information, and there is no connections to the Internet.

Thanks to the option of double-sided synchronization, two gadgets will be able to exchange these games. Thus, all mission and progress will be saved immediately on both devices.

Dropsync.

Dropsync is another popular utility for sending backup. Its feature is an additional monitoring of phone performance. If the smartphone has a low battery charge, the application will not synchronize the data in order not to reduce the operation time of the device.

Users can choose synchronization type:

• Only download data to the storage (after synchronization, the data remains in the memory of the smartphone);
• Loading and deleting (automatically delete information from the phone's memory to free up space. Users can access files using cloud storage tied to the program);
• Only download is to obtain a backup from the cloud and adding its contents to the memory of the smartphone.

Backup for all data and settings

Nand (or Nandroid Backup) is a concept that is used in Android OS to designate the full backup installed on the firmware smartphone, including all system data and its settings. Bacup also includes all installed programs.

The full backup feature is supported by TWRP or CWM recovery menu. TWRP is an advanced recovery menu that is installed on the user by the user itself, and CWM is an alternative recovery menu.

The firmware with one of two types of recovery is installed in the system section of the smartphone memory, after which you can create a backup of absolutely all data. After recovery, it is possible to use all lost programs, contacts and files again.

Also, created in CWM or TWRP backup can be installed on any other device Android, if it supports work with the created firmware version. Nandroid Backup Online

Nandroid Manager.

To create a complete backup of the device's software shell, you need to download and install the Nandroid Manager program.

The utility allows you to create a quick standard (copying all data) or custom backup system (the user chooses what needs to be saved), without entering the recovery menu. In the application settings, you can select such backup parameters:

• The name of the backup - contains a unique name, date, code and firmware name;
• Creating mode - normal (full), user selection of memory sections;
• Copy type - CWM or TWRP. Also, it is possible to choose compression to save space on the disk;
• The place where the backup will be stored. You can add it to the phone's memory, download on the PC or download to the cloud;
• Exception from the contents of temporary files, bugs, erroneous settings of the system, cache and viruses found.

The Nandroid Manager utility synchronizes the created backup archive with the cloud, the FTP server. The users are available for creating a schedule to update the backup. To save battery charge, we advise you to adjust the unloading of the new version of the backup only in the period when the gadget is charging.

Note! Uploading the full backup of the operating system through the Nandroid Manager can affect the performance of the gadget.

Backup with adb

ADB is a debug bridge for Android. Simple words, using ADB, you can create a backup system by connecting the smartphone to a computer. ADB is a console application in the window of which the user enters system programs performed on the phone.

AdB Features:

• View the contents and system settings of connected gadgets;
• Client-server interaction between the smartphone and PC;
• View logs;
• Deleting or cleaning the DATA system partition;
• Quick copy files of any formats between devices;
• Firmware;
• Application of control scripts;
• Removal of superuser rights;
• Manage network connection parameters.

To start work, download and install the ADB RUN utility on your computer.

Run the folder that appeared on the desktop of the computer as a result of installing ADB RUN. Connect the phone to the PC and in the AdB Run program folder, create a text document Devices.cmd (the file must be an object of a standard notepad or any other text editor. Immediately after the creation, rename TXT format on CMD).

Open Devices.cmd and suck the following commands in the file:

• echo Off
• adB Devices.
• pause

After the text appears on the successful execution of the operation, enter a new command to create a backup of the current firmware state:

adB Create Backup [-l] [-R] where Name is the name of the archive with a copy of the firmware.

A backup will save to the root folder of the ADB Run utility on your computer. You can move it to any other folder or cloud.

Super Backup application - Create copies without root

To create a backup copy of the smartphone data, you can use third-party programs that are able to configure the backup of the selected information without the superuser.

Super Backup is one of these applications. His main feature is wide functionality.

The user can create copies of the following types of information:

1. Applications;

3. Call log;

4. Calendar;

5. Bookmarks;

6. Contact your phone book.

To start working with the program, select the desired data type, the backup of which will be created. Next, select Cloud Storage, enter the name of the archive with the copy and wait until the copy process is completed.

To restore information, re-run the program, go to the "Restore" section. Next, go to the cloud memory and select the desired archive.

Conclusion

To never lose important data on your smartphone, follow the following backup items:

• Always keep at least one backup for your phone on each of your gadgets. In the case of a simultaneous breakdown of several devices, you can always restore their work;
• Automatic copy copy. It is recommended to configure the regular generation of backup and unloading it into the cloud. The operation will be occurring in the background, and you will never forget to copy the desired data for recovery;
• Using a backup is an extreme measure. Try to restore the OS only in those cases when you no longer found the ability to correct the error or return the data;
• Do not create too many copies of the same operating system and marked each backup file by the name of the firmware and the date of its creation. So it will be much easier for you to determine what exactly and for what period you will restore.

Thematic videos:

As the famous Iitish wisdom says, the sysadmins are divided into those who do not make backups, and those who already make backups. I think, each at least once after the firmware or failure had to configure the phone / tablet from scratch. But it's not necessary to do it at all if there is a saved backup. In this article, we will consider different types of backup (backup) content of Android devices for all occasions.

Introduction

Having received a root on the smartphone, the average user starts experimenting with the device and set various interface modifications, topics, fonts, new kernels, firmware, radio and root applications. As a permanent, long-time and active user of 4PDA and XDA developers forums, I can say that very often such experiments end in issues with wording: "The phone does not load, what should I do?" I even carefully read the instructions, you can allow a typo or click on the wrong button, after which you get bootloop - the eternal load of the phone with repeating butanimations. In the worst case, you can get "brick" - the phone will not turn on at all. It happens very rarely, and, frankly, you need to try to, for example, kill flash memory. Usually the fact that users consider "brick" can be successfully restored by simple manipulations. And the backup will help us very much. The basic features of the backup that will satisfy most of the usual users offers Google herself. In the phone settings there is the Account tab, in which you can set the necessary checkboxes. After flashing or resetting the device to the factory settings or activation of the new Android phone itself, it will restore contacts, the history and tabs of the Chrome browser, the notes of Google Keep, photos, application data, calendar events, and so on. In the latest versions of Android, you can restore the desktop with all the shortcuts and automatically deliver all previously installed applications. However, Google cannot take everything. System settings and applications will reset, saved passwords (or rather, authentication tokens) will disappear, applications from third-party markets will not be re-installed. Therefore, we need tools that can save everything at all. We will talk about them.

Warning

Most applications described in the article require root and busybox.

Bacup applications and their data.

I myself stick to the "Clean Installation" approach. When moving to a new firmware, it is easier for me to configure programs from scratch. Yes, and the appearance of bugs in this case is reduced to no, especially when moving to the next major firmware version. But many users are more convenient to save application settings and restore them on a new firmware. Especially relevant for third-party programs that are not in the market. I will focus on the two most popular applications that have millions of downloads.

Titanium Backup.

The most powerful backup, recovery, freezing and removal of applications along with their data (including system and pre-installed by the manufacturer). Allows you to configure automatic backup on schedule without closing applications, and transfer any application on an SD card. You can store different backups of a single application, save SMS, MMS, call history, browser bookmarks, Wi-Fi access points in the form of an XML file. Can synchronize all backups in Dropbox, Box and Google Drive. With this application it is easy to make any user application system, add encryption, link the application to the market after recovery (for further updates). Convenient feature - Creating based on application backup and Update.zip archive data, which can be flashed from the recovery console to restore applications and settings. One of the most useful applications Titanium Backup is to transfer applications and their settings between devices. As an example, I will show how to make the popular Whatsapp messenger on the tablet without a SIM card. When searching for the program in the market on the page describing it will be indicated that this program is not supported on your device. Even if you download and install APK, to activate the program, you need a dialing to the device, which the tablet without SIM (or LTE with the tariff without voice calls or drank from the firmware dive) cannot do. So, we go to Titanium, we are looking for the desired application, click on it and in the pop-up menu click "Save". If you make a swipe left in the menu, you can call additional functions. The same menu can be called long tap on the application in the list. After working out the script, a new record of the creation of a successful backup will appear in the notification panel. For convenience, I advise you to configure backups in the cloud in the program. Synchronization can be configured on the third tab - "Schedules". Click "Start" on the "Synchronization with Google Disc" paragraph, and a successful execution will report notice in the curtain. On the tablet, launch Titanium and synchronize backups with a cloud. It just made backup from the phone just downloaded. Whatsapp will be at the very end of the list of programs. The stricken name means that the program on the tablet is not installed. Click on the program and select "Restore" in the pop-up menu. Everything. You can run WhatsApp.

Helium - App Sync and Backup

The main difference of the program is the ability to work without the availability of superuser rights (the application uses the standard Backup Manager, available in any Android since version 4.0. - Ed.). In this case, part of the functions are cut and require an application-companion on the computer. The program will allow you to make a user dining room backup, messages and call logs, Wi-Fi access points. System applications can not be back, even if there is a root. Also, reservation can be prohibited by developers of some programs. They will be at the bottom of the list. For example, the same WhatsApp will not work. Helium remembers all the devices on which it was running, and allows you to restore backups separately on different devices. Backups can be stored on a memory card or in the cloud (Google Disk, Box, Dropbox), as well as make them on schedule. Another feature of the application - data between devices is easy to transfer, for example, starting the game on one device, you can continue on the other.

IMEI

There are no cases when cellular communication and the Internet stops after the firmware. This is a sure sign that IMEI (International Mobile Equipment Identity is an international mobile equipment identifier). This number is unique for each machine and serves to identify the device on the network. If it fails, it can reset, and the device will cease to see the network. To avoid such cases, I advise you to make a backup of the EFS partition containing IMEI: Using the programs from the market, hands through the console (AdB Shell) or on the device through the terminal emulator. It is worth noting that for different devices, the partition table can differ radically depending on the chips used. In the case of Nexus 4, in the terminal you need to enter the following commands: Bacup IMEI: SU DD if \u003d / dev / block / mmcblk0p8 of \u003d / sdcard / m9kefs1.img dd if \u003d / dev / block / mmcblk0p9 of \u003d / sdcard / m9kefs2.img Restoration IMEI: SU DD if \u003d / sdcard / m9kefs1.img of \u003d / dev / block / mmcblk0p8 dd if \u003d / sdcard / m9kefs2.img of \u003d / dev / block / mmcblk0p9 Nexus 5 does not have a separate EFS partition. Therefore, it is necessary to publish sections 12 and 13 containing not only IMEI, but also other data: SU DD if \u003d / dev / block / mmcblk0p12 of \u003d / sdcard / modemst1.img dd if \u003d / dev / block / mmcblk0p13 of \u003d / sdcard / Modemst2.img Restoration is carried out by a similar team.

Photos and video

After an unsuccessful firmware or, for example, damage or theft of the phone, the most unpleasant sensations causes the loss of shot of video and photographs. After all, applications can be renovated, passwords, if necessary, restore, and the photos, if you do not progress in advance, will disappear forever. And in the market there are programs for every taste for saving your photos and videos. Consider a few of them.

Google+

Standard program from the "Corporation of Good", pre-installed on all stock firmware. I have long been on all devices (at the moment there are more than 10 thousand photos in albums). Automatically synchronizes all captured photos with closed Picassa albums (soon the same function will appear in Google Drive). Photos will be available on all devices on which an entrance to one account is made. If there is an Internet, all photos can be viewed even on a new device by running input to Google Account. A nice bonus is an autocorrection of some photos, the creation of collages from similar photos and Gif animations from the series of photos. Also automatically appear "car crafts" - cutting to the music from a variety of photos and video taken in one day. When changing the selection of photos and videos, "Stories" and "Travel" usually appear.

Other options

• Mega. - It gives the default storage of 50 GB, has flexible settings, a synchronization client for a computer and an extension for the Chrome browser. Different viewing modes, the ability to open folders for other users.

• Cloud Mail.ru. - 100 GB for new users. It has a nice interface and client for a computer.

• Dropbox. - Interest in what has a Carousel app-Companion, which can not just automatically load the pictures, but also clean the smartphone from those that are already loaded.

Info

Important backups are better stored in a cloud or on a computer to use even after a complete wipe device.

Bacup of arbitrary files

For backup files on the SD card also have various programs. In general, they have similar functions and are distinguished by an interface or supported cloud services.

Foldersync.

Material Design, Support Amazon Cloud Drive, Box, Dropbox, FTP, Google Drive, Mega, OneDrive, SMB / CIFS, WebDav, Yandex Disk. It has a built-in file manager, a variety of settings, filters, convenient planning. Ability to configure double-sided synchronization, transfer of hidden files, setting the transmission via Wi-Fi / Mobile Internet, Taskera support, PIN protection, the ability to synchronize nested folders.

Datasync.

The ability to synchronize between devices via Bluetooth, schedule, application data, files and folders. Automatic bilateral data synchronization will allow you to save game progress and automatically download it to all related devices when changing data on one of them.

Dropsync.

Advanced synchronization client with Dropbox. Download photo and video, battery charge monitoring, Wi-Fi / 3G / 4G / WiMAX connections and adaptation in accordance with user preferences, customizable autosynchronization interval, plug-in to Tasque, the ability to select synchronization mode: only loading, loading and deletion, only Download, Mirror download and more. In fact, this is an analogue of the Dropbox desktop client with synchronization on the fly (as in the Linux version of the client, the file changes are tracked using the Inotify mechanism, so it is synchronized with everything at once, and not at certain time intervals).

Info

The Linux / Unix users will suit RSync Backup for Android, which will allow you to send and receive files from a remote server via SSH. Has support for Tasker.

Full device backup

Nandroid Backup (from Nand - the type of memory used in modern smartphones) - the full backup of the entire firmware is entirely with the applications given and the settings. The function is supported by TWRP or CWM. In addition, the backup can be done directly from Android using the Online Nandroid Backup program. Restore individual data will help the Titanium, as well as Nandroid Manager. First, let's see how to make a backup from the recovery console.

CWM.

To create a backup, you must select Backup and Restore, and then Backup to / SDCard. Before clicking, you can select a backup format or release unused data. To restore, select Backup and Restore and further Restore From / SDCard. If you select Advanced Restore From / SDCard, you can specify to restore the Boot, System, Data, Cache, SD-EXT sections separately. For greater safety, the resulting backup can be transferred to the computer. But there is one snag. The fact is that if the device has an "external" (real) memory card, CWM will place backup in it and it will be available to save on a computer with standard tools (CLOCKWORKMOD / Backup directory / date-and-time-backup on the memory card ). Here everything is in order.

Lyrical retreat, or recognition in love for Nexus devices If you look at the structure of the Nexus device partitions using the ADB Shell BusyBox FDisk / DeV / BLOCK / MMCBLK0 command (you need root and installed from the BusyBox market), you can see the following picture (see Screenshot "Partition structure on Nexus 5 and Nexus 4"). The ABoot section is the primary bootloader. It can be damaged if, for example, to flash kernel or bootloader from another device or pull the cord from the phone during the firmware process. At the same time, the partition table flies and the phone stops loading into the bootloader and recovery, and also stops responding to the FastBoot and ADB commands. An ordinary user thinks that it is "brick", and carries the phone to the service center, where pays more than a hundred dollars for a new one in return to the alleged burnt fee. In fact, in section 15 at Nexus 4 and section 11, Nexus 5 contains a backup copy of the bootloader - ABOOTB. This is one of the reasons that it is almost impossible to kill Nexus, because the backup bootloader can be restored without any problems. Turn off your smartphone and turn on with simultaneous keystroke . Then simultaneously press and hold the combination of buttons (It will work only if the main bootloader is killed). After that, connect the device to the computer (now it is determined and the ADB will earn) and copy the backup loader to the section of the main commands of $ ADB SHELL SU. The partition table will be restored, and if necessary, you can further flash the desired bootloader.

However, in smartphones without a memory card slot or in the absence of a backup, it will be invisible to the user. This is due to the fact that from version 4.2 in Android has changed internal memory mounting points to ensure work in multiplayer mode. The virtual (internal) memory card itself is mounted in / Data / Media, and there is a CWM backup. But the main user data is in / data / media / 0, and this directory is then mounted as / sdcard. Therefore, the backup will remain unavailable using standard tools and without root rights. You can get backup from / Data / Media using a file manager with superuser rights or by connecting a smartphone to the computer in Recovery mode. Next, enter the ADB Shell command, and then LS / SDCard / ClockworkMod / Backup / to search for a catalog with the last backup. We carry backup approximately such a command: $ adb pull /ssdcard/clockworkmod/Backup/2015-04-20.15.46.18 \\ "D: \\ Nexus5 \\ Backup \\ Nandroid \\ 2015-04-20.15.46.18" Where the numbers are previously found backup, The corresponding date and time of appearance, and at the end - the path on the bag for storing a backup, which can be arbitrary.

TWRP.

To create a backup, press the backup button and the crosses mark the necessary sections (not sure - choose everything). Additionally, you can remove encryption, enable compression, skip the creation of MD5-hash and select saving to USB - OTG USB flash drive. As a result, the backup will be in the / sdcard / TWRP / backups directory / date-and-time-backup. Unlike CWM, it will be available regardless of the availability of a memory card. For recovery, click Restore and choose the desired one.

Info

The market has a large number of programs for a separate backup and restoration of SMS, calls, contacts, nuclei, recovery, and so on.

Nandroid Manager.

This is a universal tool for managing all Nandroid backups. Using Nandroid Manager, you can recover from Nandroid applications and data, SMS, call log, Wi-Fi access points, saved Bluetooth conjugate devices, user dictionary. The application sees backups created in both custom recovery, and allows them to rename and search for information in separate bases inside the backup.
Features Nandroid Manager

Online Nandroid Backup.

Allows you to make a backup on the device running in normal mode without rebugs into the recovery. In the settings, you can select the following parameters:

• Backup name - each time manually / by time zone UTC / by the time zone of the phone / based on the firmware version number, including the creation time.

• Bacup type - CWM / TWRP with or without compression.

• The mode is normal (full) / selection of sections for copying. When choosing the latter, the list opens with the choice.

• Place to save backup.

• The number of backups for storage from "all" to 10 (when overflowing is older is removed).

• Saving sections YaffS2 as tar-files.

• Exclusion Dalvik Cache from backup.

• Exclusion Google Music files from backup.

The program supports uploading backup files in a cloud, FTP or Google Drive. A custom schedule is available for automatic backups, from "every day" to "every 30 days" with the option "Only when the device is charging". In addition, with the plug-in supported actions for Tasker.

Bacup with ADB

The way, so to speak, for gickers. We connect the smartphone to the computer, turn on USB debugging. Next, we use the ADB Backup command, which has the following keys:

• -F file is the location and name of the file created by the backup on the computer. If there is no one parameter, the backup will be created in the current folder with the name Backup.ab. In the case of Windows, the paths with spaces and special symbols should be included in quotes.

• -APK | -Noapk - save or not in the backup APK application. By default - do not save.

• -System | -Nosystem - Save system applications in backup. Default - save. Select -NOSYSTEM Disable Save system applications when the key is set.

• -all - save all installed applications in the backup, including systemic.

• --Shared | -Noshared - whether the application data and the contents of the memory card are included in the backup. By default - do not save.

• - Here you can write a list of applications that will be backup. Ignores -Nosystem.

Accordingly, to perform a complete backup, we use such a command: $ ADB Backup -f "D: \\ Backup \\ ADB-2015-04-20.ab" -APK -shared -all -System After that, now NOW UNLOCK Your Device and and the console will appear in the console Confirm the Backup Operation, and on the phone a notification request to confirm the operation and install an optional password on the backup. The process of creating a backup can last more than forty minutes, so it is not necessary to nervous. To restore, use the command "ADB Restore path-to-file" command, for the example above it will be: $ ADB Restore "D: \\ Backup \\ ADB-2015-04-20.ab" Confirm the request on the phone, enter the password (if installed when Backup) and waiting for recovery that can take even more time than the creation of the backup itself.

Info

You can find out the IMEI numbers all their devices tied to Google (including older), on the Google.com/Settings/Dashboard page, open the Android list.

Conclusion

I hope this article will help you save time and nerves in experiments with the device. And even the loss or theft of the phone will not be a tragedy when photograph and applications stored in the cloud cloud.