IPhone writes that charging is not supported. Message to iPhone: "This accessory is probably not supported"

Trying to charge your iPhone The owner of the gadget can suddenly encounter a message on the screen of the smartphone "This accessory is probably not supported." Attempts to somehow influence the situation do not give anything, forcing the user to refer to the network capabilities for solving the problem. Below I will figure out what the essence of this dysfunction on the iPhone, what are the factors of its occurrence, and what can be taken in the situation when this iPhone Does not support this accessory.

The appearance of the message under consideration "This accessory is probably not supported" usually signals, something went wrong when connecting the accessory to the charging port (Lightning iPhone). The variability of factors causing this problem is usually as follows:

Your acceumar is not MFI certified;
Software serving your iPhone works incorrectly;
Accessory is polluted, damaged or completely broken;
Port Lightning iPhone is contaminated, damaged, or completely broken;
Charging the gadget is contaminated, damaged or failed.

We will analyze the steps that can help us correct the error to support the accessory on the iPhone.

Step number 1. Make sure your cable has MFI certification

In most cases, the dysfunction under consideration occurs in a situation where the user uses a cable to charge his iPhone, which has not passed MFI certification. This means that this cable is not made in accordance with the proprietary standards "EPL", and the chip-built chip for authentication of MFI certification works incorrectly, or there is no one at all.

Fake cables are much cheaper than the original, and you can easily buy them on some cheap sales or the Chinese on, and Ali. Typically, such accessories have no MFI certification, and in a number of launched cases, they can cause a breakdown of your gadget due to its overheating.

If you have the opportunity, use the original cable for your iPhone, which you can purchase in the nearest certified stores "EPL".

Step number 2. Restart your iPhone

In some cases, the error "This accessory is probably not supported" on the iPhone may occur due to a random failure in the work of the service software. When connecting an accessory to "Lighting Port", the program installed on the iPhone determines the need to connect the gadget to this accessory, and in the case of its unstable work causes the error under consideration.

Try restarting your gadget that sometimes it can fix minor problems in the work of software. If you have an iPhone model 8 or earlier, press and hold the power button, then swipe the power icons from left to right. Wait 15-30 seconds, then turn on your iOS device while holding the "Power" button or the "Side" button (iPhone X). Once your device turns on, try to connect your accessory again.

Step number 3. Survey your accessory in case of accessory support error

If you are doing well with MFI certification, you are not good and the software is not buggy, make sure that your accessory (and usually charges the charging cable) is not damaged. Take a look at the Lightning Connector (parts of the accessory, which is connected in the Lightning Port of your iPhone). Does it have any signs of damage, discoloration or wear, since even in the case of a certified accessory, this may cause an error of the device connection.

The effect of water can also cause dysfunction of your cable, because if you have recently shed water on it, it may well fail.

Explore the accessory for damage

Also look at the port of YUSB for the presence of dirt, vague or residues of any substances. If any, get rid of them using an antistatic brush or not used toothbrush.

Step number 4. Check the Lightning Port Your Device

If there are no problems with the accessory, look at the Lightning port of your iPhone. Any forms of dirt and residues of substances can prevent your "apple" in the implementation of the correct connect of the accessory. Use a pocket flashlight, and examine the mentioned port. If you see there is something too much, remove it with an antistatic brush or unused toothbrush.

Get rid of dirt in "Lightning Port"

Step number 5. Make sure you charge your gadget

Also, the cause of the problem "This accessory is probably not supported" may be dysfunction in charging. Survey the YUSB port of your charging, make sure that there are no dirt, fibers and other unnecessary substances, and if necessary, get rid of them with the help of the 4 tools described by me.

Try to use alternative charging to make sure that this device is not the cause of the problem. If with another charging problem does not occur, then there is a possibility that your initial charging is damaged and needs to be repaired (or replace).

Step number 6. Update your iOS.

Some accessories (especially created by EPL) require presence on the iPhone defined version of iOS. Go to the settings of your gadget, select the "General" subsection, then the data update option, and tap on "Download and Install".

Before installing the necessary updates, make sure your iPhone is charged at least 50% of the battery. When the installation starts, your iPhone will turn off, and only the update status strip will be displayed on the screen. When it is filled, the update will be completed, and your gadget will return to its standard functionality.

Step number 7. Little tricks

If the listed methods did not help, you can try to use various ingenious methods proposed by users, allowing you to get rid of the "Accessory not supported" error. For example:

Conclusion

If you have dysfunction, "This accessory is probably not supported" on the EPL it is recommended to make sure that the user used by the cable is certified. If apple is certified by this accessory, and the mentioned error is observed on it. I recommend using the other steps listed in this material, allow you to correct the IOS accessory support error.

In contact with

Let's figure it out now why you have a message "This accessory is probably not supported by the iPhone. Let's see what to do so that it is lost and what accessories you need to use.

This article is suitable for all iPhone models XS / XR / X / 8/7 / 6/5 and Plus on iOS 12. On older versions may differ or missing the menu items and hardware support specified in the article.

Causes of the appearance of the message "This accessory is probably not supported"

An error on the smartphone screen is displayed in situations when the user tries through the port for charging (Lightning) to the gadget to connect the accessory. There may be several reasons for the appearance of this error:

Software Iphona made a failure.
Accessory has no MFI certificate.
Lightning port on the iPhone is broken, damaged or contaminated.
Gadget is broken, designer or damaged.
Accessory that is trying to connect is broken, damaged or evaporated.

Let's look at what steps should be performed to determine the cause of the error and correct it.

Reconnecting Lightning Cable

In most cases, it is very simple to solve the problem. To do this, you need to reconnect your device several times to the Lightning cable to try to get rid of this error. In practice, users see that after performing several reconnecting charging to the device iPad or iPhone, this error disappears.

Change USB port on PC or Mac

If the error "This accessory is probably not supported" appeared when the iPhone is connected to a PC or Mac, then possible cause This problem may be a defective USB port. Apple gadget should be connected to another USB port and see what happens from this. If the error has disappeared when connected, it is likely that the problem is related directly to the USB port on the MacBook or on the computer.

Connect the Lightning cable to Afone.
We expect until the error "This accessory is probably not supported" again will not appear on the display.
Restart the device with a connected charging cable.
When devices turn on, check the presence of an error.

Similar to the tricky way, users bypass this problem.

Error cunning

Lightning cable Connect to the device from Apple and expect an error appearance. When an error message appears, you must click on the "Close" button and hold your finger on it, and then turn off the lightning cable from the device.

Then connect and check again whether it turned out to correct the problem. This method helps infrequently, but can work.

Clean the charging port on the gadget

The cause of the error may be related to the port contamination to charge an iPhone. The problem is solved by easy cleaning port of the connection.

We take a clip and try to carefully clean the lightning connector on the gadget from all the garbage, which can be there. There is a chance that dust has gathered there or something went there and prevents the correct connection with the device.

After cleaning, you should try to connect the LIGHTNING cable to iPhone. It was pollution that became one of the most common causes of this problem. If it is not in the contamination of the connector, then problems can be serious.

Replacing Lightning Cable

Of the above instructions, nothing helps, and you can't charge an iPhone? Then you can use the exclusion method to determine the cause of the error when the accessory is not supported. The essence of the problem is in the Lightning cable or in the port on the device for it.

When using some third-party cable, not from apple companiesIt should be replaced with the original certificate with the MFI. A similar solution will cost more, but will be able to solve problems.

If the original cable is used, then it could be damaged. Apple users often complain about incredibly fast failure cable Lightning. In this situation, you will need to find a new original Lightning cable.

If it is clear that the case is not in the cable, then the error is the port on the gadget. The device could be damaged due to some events, after which the phone to charging was impossible to connect. If you think the reason for this is worth contacting the specialists in service center.

Once you saw an unexpected message on the screen of your iPhone: "This accessory is probably not supported." Most likely, before this, you tried to charge the device or transfer data to a laptop with it. Why did the error arise? How to fix it?

Why does Error-Molenge appear on the screen: "This accessory is probably not supported"?

Most often, a similar error message appears when trying to use non-license and low-quality accessories. Developers operating system IOS took care of the maximum user protection. To do this, it was necessary to enhance compliance with the rules asked by the developer and enter the restriction on the use of accessories not intended for Apple devices.

The problem concerns primarily the lightning cables, and is an important way to preserve the efficiency of the apple device. When using a poor-quality accessory, numerous breakdowns are possible: spoiled batteries and smartphone chips, fire. This is especially true of the cheap substitutes of the original Lighting cable from Apple.

Other reasons for the error message "This accessory is probably not supported.

In some cases, your cable may be original, but if a message appeared, this indicates the following problems:

the wire is damaged due to wear;
there is damage or pollution USB port iPhone, computer entry or maccake.

MFI standard

It is best to charge an iPhone from Apple's native charger or purchased in the Apple Store brand store. Such a measure most protects you from the occurrence of problems when charging a good device. If you are using an apple not original accessory, check the presence of MFI marking on your Marking cable. This certificate guarantees the apple quality check.

We solve the problem quick

In some cases, the problem with connecting the cable is solved quite quickly. Do not rush to run to the store for new charger or wire. So that the error message disappear will help simple actions.

Reconnect Ligtning Cable

Sometimes it is enough to reconnect your device to the cable to restore communication with the device.

USB port change

If you tried to connect an iPhone before receiving an error to your MAC device or laptop, try changing the USB port. If after that the error message will disappear, then the cause of the problem was in the port fault.

Reboot

The famous advice of our computer grandmothers "one hundred troubles - one reset" sometimes works for modern iPhones. Try to restart the device with the already connected Lightning cable.

Clean the port on iPhone

In some cases, the error "This accessory is probably not supported" is issued due to the contaminated port of your iPhone. If you are watching pollution traces, try cleaning the port from dust, bread crumbs using a small acute object and repeat the cable connection again. Be careful not to damage the apple device with excessive diligence.

Serious methods

If a emergency helpThe described above does not help get rid of the error, perhaps you are using third-party cable. Replace it on the original or MFI. Such a solution will cost you cheaper than the subsequent probable repair of the device in the workshop. Before that, for reliability, if you feel the strength to combat capricious technique, you can reinstall the system on the iPhone.

To restore the performance of the iPhone, you can reinstall in dFU mode. It can be held with using iTunes. or third-party application. In ReiBoot, reinstalling iOS is carried out using understandable manipulations and in some cases may be accessible.

The most rigid method of "treatment" of the iPhone from the error is to give the device to the service center. Professionals will help solve problems if ports are damaged on your smartphone or other malfunctions are present.

To correct the problem when you see the inscription connected charging, you do not need to go to the service. Contact us and call the repairman if the gadget writes "This accessory is probably not supported device iPhone."And it is impossible to connect it. Thanks to the competent organization of work, the engineer in most cases arrives within 30 minutes. An employee will bring the necessary accessories, so the recovery of the device will be completed quickly.

Take advantage of the workshop. Attractive prices are explained by the established work with apple owners. If you need to replace the details, it is not necessary to order it, a large selection of components are assembled in the company's warehouse. Thanks to direct cooperation with manufacturers, we offer spare parts at a bargain price.

Causes of the inscription "Not supported by the device"

A similar message about the accessory can appear because of various reasons, below are the main:

The user probably charges an iPhone wire low quality, characterized by several millimeters from the original, with the time the connector expands, the solution is to replace the lower loop.
Used original charging, but intended for iPad. The phone adapter at the output of 1 volt, at the 2 volts tablet, if you charge a more powerful device, the battery capacity is reduced and the microcircuit can burn the power controller, without suppressing a more powerful load.
In rare cases, the reason for the message appears on the iPhone 6 This accessory is probably not supported, in the contamination of the lower connector. In this case, you can try to clean it with a special spray "Contact Cleaner".

Call our consultant, it will immediately determine how much repairs will cost, tell me how to correct the problem. If the device recovery is required urgently, the initially indicated rates will not rise. Despite the operational execution of procedures, when headphones, charging or other elements are not connected to the iPhone, do not have to pay extra for urgency.

Users Apple (iPhone, iPad, iPod) technology can be very often visible on the screen of your gadget message: "This accessory is probably not supported."

There are still a couple of similar notifications, but usually they appear in the same reason. Let's tell you why it appears and how to deal with such a problem.

Causes The appearance of the message: "This accessory is probably not supported"

Well, I will begin a little bit from the background and talk a little about the cables for charging our favorite Apple gadgets. I think everyone knows everything perfectly that at first it was 30-pin cable and starting with the iPhone 5 began the era of Lightning.

How many years this technique exists, so many years you can observe the complaints of users about these cables. But the thing is that the complete option can turn into something terrible literally after a couple of months.

The reason for this can serve as daily use and materials that are used. Apple always fought for the purity of nature and therefore, the cable shell is made from a material that is not harmful to the environment.

Although some people manage to use standard cables long enough and then you start thinking that they are wizards.

So, moving to the point, when the cable breaks, then buy a new branded cable is really expensive and people buy Chinese options. They cost enough cheaply and you can immediately catch the way.

In fact, this is the main reason for the appearance of the message "This cable is not sure and the reliability of its operation is not guaranteed." Now everything will be analyzed in more detail and even more:

Just the first reason for such a message is a Chinese cheap cable. Very often, people buy this type of cables and then have problems.
At best, the phone will be charged and everything will be fine. But there is a high probability that you can harm your device and nothing good will definitely.
By the way, it happens that with one version of iOS. Chinese cable works. But when you are updated, the notification appears.
Also, this kind of message appears if the standard Lightning has damage. If you see that the cable was damaged or just an old one, then the reason is that.
Well, in the most worst version, you have something happened to the connector itself. If the phone fell, water fell there and many similar situations.

These are approximately moments and let's go to these problems. After all, exits from the situation exist and I will be happy to share this information.

What to do in such a situation?

The very cool that sometimes even with a cable without damage can also appear such a message and then you just need to try everything to implement again and there is a high probability that everything will work fine.

This is a way out of the easiest situation and therefore now consider solving problems from the past section:

Here in principle, and all situations that may arise in general. I described the most popular options, but I think people could have happened and something else.

RESULTS

So if the message "appears on your iPhone or iPad" This accessory Not supported, "I don't stand at all and just follow my advice.

I think all the normal specialists who understand the technique will tell you absolutely the same things. So take care of your devices and use high-quality accessories.