What to do, the iPhone cannot restore the backup. What if the iPhone gives an error in iTunes when restoring or updating

Confident that many have encountered hanging in the reim of recovery after updating iOS 12/11 / 10.3 / 10.2.1 / 10.2 / 10.1 / 10/9, especially users phone iPhone. X / 8/7/7 Plus, SE, 6S / 6S Plus / 6/6 Plus, 5S / 5C / 5, 4S, tablet iPad. or iPod Touch player. When you see on the screen of your iPhone - USB cable and iTunes icon, means that an iPhone is in recovery mode. Today I will tell you how to bring an iPhone from recovery regime, how to solve the iPhone hung in recovery mode.

Solve hanging in the reim of recovery with Tenorshare Reiboot (for free and one click)

First download and arrange on your computer. Connect the iPhone / iPad / iPod Touch to a computer using USB cables. Then Tenorshare Reiboot recognizes your device in recovery mode, click the "Exit Restore Mode" button. Wait a bit and the device reboots safely. In this process, do not disconnect the device.

Of course, Tenorshare Reiboot quickly and easily solve your problems with hanging and display the iPhone from Recovery Mode. If your iPhone is still stuck in recovery mode or after a while the system got on the screen, did not react, maybe due to damage file System, Correct operating systemTo restore it completely without data loss.

Other ways to bring iPhone from "Recovery Mode" (difficult and loss of data)

The way out of Recovery Mode is forced to restart by holding the home button (HOME) + Turning on (POWER), and not releasing Holding these buttons 10-15 seconds. After that, your device reboots.

If it does not work, there is a second way to get rid of the black screen with the image of the cable and iTunes- to recover in iTunes, but it will erase all the contents, so creating backup Before using it.

• Download and install Aytyuns on your laptop.
• Open iTunes, connect the device to a PC using a USB cable.
• Wait for the appearance of an iPhone image on the screen with a connected cable.
• Press the "Restore" button in Aytyuns. The device will start working again as usual.

What is Recovery Mode?

Recovery Mode, open mode when the device is turned off, and the USB connection is active. It is through this mode that overlashing and "update" occurs. If you connect iDeys in this mode to iTunes, then you will make a message that the program has detected a "device in recovery mode". A USB cable and iTunes icon will be displayed on the screen.

Causes why iPhone hung in recovery mode

the iPhone hangs in recovery mode, there are several phenomena. May be:

• hardware I. software failure
• after / during jailbreak
• after / during update iOS 12/11 / 10.3 / 10.2.1 / 10.2 / 10.1 / 10
• file System Damage

With TENOESHARE TENORSHARE REIBOOT, you can quickly and easily solve problems, including the apple logo / on the black screen / during startup / on blue screen Death, delay in DFU mode / in recovery mode / button home, errors (iTunes program was mistaken in sync / update / restoring iOS. Devices) on iPhone / iPad / iPod, without loss and damage to data. Welcome to the use of our products.

You probably turned out to be in a situation at which your iPhone seems not working (while the white on the black download screen is displayed). As a rule, users cannot understand how this could happen, and wonder about the iPhone. To sort out the situation, try to trace your actions. Try to remember whether you have set any new applications lately. Did you make a hard reset of the device when your iPhone hung for any reason?

Of course, a reboot can help in this problem, however, try to avoid hardware reset device, make it only after you are 100% sure that your phone does not respond. Below is a description of how to restore iPhone 3G and later versions.

Most users resort to such an option to solve the problem as a recovery of an iPhone (loading the device in recovery mode), but sometimes it still fails to connect to iTunes. In order for the device again it worked correctly, perform step-by-step instructions of how to restore the iPhone.

1. Turn off the gadget. You may have to make hard reset (hold hOME buttons And Sleep until the screen turns off).

2. Connect the USB cable to the iPhone and run iTunes.

3. Now the most difficult part of the process begins.

You must get your iPhone in (update the device firmware). For this:

a) hold the HOME and SLEEP buttons for 10 seconds;

b) after 10 seconds release the SLEEP button;

c) Continue to hold Home Button for another 10 seconds.

If you executed the actions described above correctly, you will see the appropriate message in iTunes. If not, repeat the above steps - time decides everything.

4. At the following stages, iTunes will restore original firmware Your iPhone.

After the process is completed, the recovery of the iPhone takes place, but it will load empty already.

5. After the recovery process, the gadget is rebooted. If you are still connected to iTunes, you will be able to restore the contents of your iPhone from the backup.

If you stop the process during the process iPhone syncIt will not be completed in full and upon subsequent attempts. You will then not be able to restore the contents from the backup if you have not completed full copying for the first time after recovery. It is for this reason that you can meet user feedback that cannot understand why they could not restore the iPhone.

Remember that the process reserve copy It will not move in a steady pace on the last 5-10%. At this stage, the indicator will stand still for a long period of time (1 - 3 hours). Do not stop the recovery process. Everything is in order, he just takes a lot of time. On average, it will take 2.5 hours to complete this process. If you want to know, iPhone, count for a long time.

6. After the recovery process is completed, iTunes will start working faster and iPhone will reboot.

7. After that you will need if iTunes is configured to start automatic synchronization, you do not need to do anything.

As a rule, manual for how to restore the iPhone via DFU mode helps to completely return the device functionality. However, deciding to resort to this process, remember that you should have enough time in stock, since the entire procedure can take up to 3 hours.

Hello everyone! The topic of the restoration of IOS firmware has long been reviewed on the Internet along and across. And, frankly, at first I did not want to write about what is already in the network. Why make the same type of instructions? But then it was still decided (these are the torch of the author of this blog! :)) that there is a need for this.

So why another instruction? Everything is very simple - I have a lot of questions, both in the mail, and in the comments about various failures in the iPhone software and, in most cases, you can cure them only with the help of software recovery. So the process is important and bypassing it in any way can not, and I will be easier to answer your questions - simply pointing to this article. Eh, it seems to be justified :) Let's go!

Several important comments:

1. When restoring the iPhone, absolutely everything is removed from it. It turns out such a phone as if you just bought it in the store.
2. You can restore only with the help of the computer and iTunes program. "By air", via iCloud or otherwise do it impossible.
3. The procedure is performed both with a fully operational device and in the event that the iOS system is not loaded (in this case, you need to enter into DFU mode).

By the way, recovery is the only way Remove the jailbreak with the iPhone correctly.

Detailed IPhone Restore Instructions

So, full and detailed step-by-step instruction. We start iTunes on your computer and connect the iPhone if everything has passed successfully, then in the main program window, the phone model is displayed, its firmware and other data. At this stage, two errors are possible:

1. The computer does not define the iPhone - about it.
2. If the device does not submit signs of life - we try.

As a result, with any successful connection we get one of two windows.

And here we are interested in only one button - "Restore". If you just click on it, then iTunes will begin to prepare the iPhone, downloads the last relevant firmware from the Apple servers and starts it to install it.

Attention! The "Find iPhone" function must be disabled!

The largest "snag" is precisely in the firmware loading. Sometimes this process occupies enough a large number of time, especially with a slow Internet. Plus, if the connection is not distinguished by stability and possible communication breaks, then iTunes every time it will begin to download it again, which will agree not very nice and long.

But there is a way to speed up the recovery process. To do this, you must independently download the file. software In format.IPSW (from any third-party resource, such as 4PDA) and save it on the computer. Note - for each models iPhone.will have your own other than others, the file!

Now, clamp the "SHIFT" key on the keyboard and then press the "Restore" button. A window will open asking you to specify the firmware file. We choose in advance downloaded and waiting - iTunes will do it yourself.

Why can't you restore the iPhone and what to do?

There can actually have a lot of reasons. Moreover, they are connected with both a computer or device, and simply with inattention.

Here are the most basic:

1. Lack of Internet access on a PC or periodic of its cliffs and shutdowns.
2. Antiviruses, firewalls and other programs preventing the normal functioning of iTunes. Maybe your security settings are configured in such a way that iTunes elementary does not access Apple servers.
3. Slow internet. Not even so. Very slow Internet. Now it is rare, but I remember my attempts to reanimate the iPhone in the distant 2009 using the access to the network with a USB modem. I will not paint everything, I will say the result - the recovery failed.
4. In the case when you independently download the firmware - see if it approaches exactly for your phone model.
5. Check for iTunes. If yes, install last version programs.
6. It is very desirable, what is already there, be sure to use the original USB cable, not certified can contribute to the appearance various errors. Unoriginal can only be, and it is not always, but for flashing (recovery) they are not suitable.
7. It is possible that the problems are already inside, that is, "iron". Faults can be mass - from the loop, to motherboard. Remember, not or too much.

As you can see, there are really many options. Please pay attention to any trifle - after all, it is because of it that may arise with the recovery of the iPhone. Anyway, something does not work? Be sure to write in the comments - let's try to figure together!

P.S. They say that the recovery is successful and correctly, you need to put a "like" of this article. They lie probably, but just in case I put it ... and everything turned out! :)

If the user faces problems on the iOS device, the most effective decision There will be an iPhone recovery to factory settings or from a backup. However, it does not always work out. As practice shows, the recovery of iPhone from the backup in iTunes or ICloud does not always end with success. In some, judging by the reviews on the forums, such errors as 3194, 4013 occur during the recovery process. If you encountered a similar problem, use the solution described below.

Not restored by iPhone after updating on iOS 11

If you installed on your mobile device The latest version of the software and now want to recover the iPhone via iTunes, but iTunes does not recognize your device when connected, most likely the problem lies in the apple mediacombine.

Check what version of iTunes. You have installed - it is possible that it is already outdated. If yes, then install the most relevant. After that, put your device into recovery mode and connect again to iTunes to re-attempt. If necessary, use the TuneScare program to solve problems with the synchronization of mobile device with iTunes.

It is impossible to restore the iPhone - an unknown error

If you connect your smartphone to a computer and run iTunes, then start the recovery procedure, and an alert appears on your screen that the iPhone cannot be restored, since an error occurred (error code), then you should use the program.

The most frequent errors are usually 3194, 9, 4014. Each of them indicates a certain problem. For example, an error 4014 indicates a faulty cable, a damaged port or some other problem with the equipment. If the error is related to the work of the iTunes program, then it must be eliminated.

Restore from the backup of ICloud goes too long

If you are in the process of activating and configuring your iPhone, you have chosen the recovery function from iCloud backup, and the process lasts too long and does not end up, most likely, the device has lost a stable connection to the network.

Check out wi-Fi connectionTo which the iPhone is connected. If necessary, connect the phone to the power source. Only then run the recovery process again.

4 Situation. iPhone hung in recovery mode

You are trying to restore your device, and it hung up in recovery mode. Trying to update it through iTunes, but a message appears about the need to restore it. After the recovery process is completed, the phone restarts and again requests recovery or update.

To get out of this closed circle, use the program. The free tool will allow you to exit the recovery mode with one click. After that you can re-recover through iTunes.

It is impossible to restore the iPhone after jailbreak

A common situation among the jailbreak community. An attempt to restore your phone after the jailbreak is turned into a collapse and pop-up message that the device is not suitable for the requested assembly. What to do in this case?

Turn your phone to DFU mode and try to restore again. Also help cope with an error can program ReiBoot - With it, you can return the iPhone to the factory settings.

How to reset iPhone / iPhone to factory settings without iTunes & Poring

How to restore the iPhone if it is blocked

Another possible situation in case you have forgotten the password from the phone, made some unsuccessful attempts to enter the PIN code, and the device was blocked. If in this case try to make recovery through iTunes, at a certain point you will still be asked to enter a password from the device.

If you have a "Find iPhone" function on your phone, you can open icloud, log in through the Apple ID, in the "My Devices" section, select your phone and click on the "Erase" button. After that, you will need to restore all the data from the backup.

iPhone is not restored - not enough memory

Very often when restoring iPhone program iTunes refuses to do this and writes that the device is not enough memory. You can get acquainted with the memory flow statistics through the application Settings - Main - StorageiPhone..

If, really, memory is not enough - delete large applications, photos and other data. If there is a place, and the message pops up anyway, it means you need to update iTunes to the latest version, update iOS, restart the computer and iPhone.

If you hit one of these situations, we hope that the decisions description helped you to correct the problem. If you still can't restore the iPhone, ask us your questions in the comments.

What is the recovery of the iPhone and how it differs from the update to know should each owner of the iOS-device, be it a beginner user or guik. Moreover, all this is quite simple, if not to say more - elementary.

For those who are not "in the subject" within the framework of today's instructions, we will get acquainted with what is the iphone flashing, which there are options and methods of flashing than the restoration of the iOS-device differs from the update and how to reflash the iPhone.

Why we argue that the skills iPhone firmware Or should I have each device owner? Do not gag's owner of such an expensive and exclusive apparatus run service center Whenever at the program level arose difficulties in the work of iOS-device or Apple has presented new version Mobile operating system iOS. Moreover, the process itself takes no more than 10 minutes and from the user, in most cases, a minimum of effort is required.

We consider the subject of today's instructions on the example of the iPhone, it will be easier for us, and you, dear readers.

What is the iPhone firmware?

If we are talking about the iOS-device firmware as a software component, the iPhone firmware is its software or operating system. IN apple companies iPhone software iPod Touch. And the iPad is called briefly iOS, which is translated from English if iPhone Operation System.

If we talk about the iOS-device firmware as a process, the iPhone firmware is the process of restoring or updating the device software. The term "flashing" is most often used.

Options for flashing iPhone

2 processes include 2 processing of iOS-device:

• restoration;
• update.

In essence, the processes are identical that in the first one that in the second case, as a result of flashing on the iPhone, it will be installed new iOS.. Moreover, the concept of "new" in the case of the iPhone recovery refers not to the version of the operating system, but to its state, in other words - "clean".

IPhone flashing methods

You can reflash the iPhone 2 ways, one of them is universal, i.e. Used both to restore and update, second - only for updating:

1. IPhone firmware via iTunes;

In the first case, software is booting to a computer and using the iTunes mediacombine it is loaded directly to iOS-devices. Relevant for iOS 4.3.5 inclusive. For iOS 5 and above, the second method is possible, which implies iOS update directly from the device via the Internet wireless network (Wi-Fi).

What is the difference between the recovery of the iPhone from the update?

As we said, the recovery or update of the iPhone refers precisely to the software component.

The iPhone restore is the process of restoring the source settings of the device. When restoring the iPhone, all content (photos, video, music) and personal data will be removed (photos, video, music) and personal data ( phone book, Information from the calendar), the device settings will be reset to factory.

If we speak in a nutshell, the iPhone restore is a reset device to the factory state and the installation of "clean" iOS is the latest version.

Under the update of the iPhone implies the process of transition from more old version iOS to a newer one. As a result of updating, the entire content, personal data and settings will remain intact and iOS will be updated to the new version.

As you can see, the principal difference between the recovery and update of the iPhone consists only in the fact that as a result of updates, content and personal data from the phone are not deleted.

As a result, it turns out:

IPhone Recovery \u003d Content Delete + Reset Settings + IOS Update

As you know, the iPhone, like any other iOS device, can be in several modes provided by the manufacturer: Normal Mode, (Recovery Mode) and (DFU MODE).

It is possible to restore or update the iPhone located in the following modes:

• in normal mode;
• in Recovery Mode;
• in DFU mode.

How to restore iPhone through iTunes?

In order to restore the iPhone through iTunes we will need:

• the latest version of iTunes (preferably). At the time of writing the material, it is relevant to iTunes 11.1.5.5. ;

ITunes window that updating is not required

• pre-downloaded file with a version that currently Installed on the iPhone (optional).

Warning in iTunes when firmware iOS

So, suppose that the latest version of iTunes is installed on your computer, and you downloaded the firmware file for your iPhone model on hDD.

1 If your iPhone includes the "" function, disconnect it in the device settings;

Warning iTunes that you need to disable find iPhone

2 Connect the iPhone to the computer using a USB cable.
If the iTunes settings are not specified automatic start programs when connecting iOS-devices, run iTunes;

Selecting a device in iTunes

3 Go to the configuration page of the device synchronization from iTunes by clicking the button with the name of the type of machine in the upper right corner next to the "button" iTunes Store.»;

Device Information in iTunes

4 Hold down the key Shift.»On the keyboard, click on the button" Restore"(For Mac, click the button Alt + Restore). The firmware selection window will appear local disk;

5 Select the previously downloaded firmware file with the extension ". iPSW " and click on the button " Open". Confirm the iPhone Restore Request. iTunes initiates the recovery process. More than any action from you will not need, iTunes will automatically delete the entire content and load the "fresh" firmware in internal memory iPhone. At the same time, the device will be translated into and the restoration of the device to the factory state will be performed.

Confirmation of the start of the firmware process in iTunes

iPhone is stitched

It's important to know

The iPhone restore process can be fully trusted iTunes, and you do not need to download the firmware file to the hard disk, but after such a recovery, if more is available in iTunes fresh version iOS, it will be installed on the iPhone. In fact, the content is removed, reset the settings and update the iPhone to a new iOS.

How to restore the iPhone from Recovery Mode and Dfu Mode?

IPhone recovery procedure from recovery mode ( Recovery Mode.) or firmware update mode ( DFu.-Reply) completely identical, for the exception, before restoring it is necessary to enter the iPhone in Recovery Mode or DFU MODE, respectively.

2. Connect the device to a computer using a USB cable and run iTunes. The program will determine the iPhone in recovery mode;

iTunes defined iPhone in recovery mode

3. Hold down the " Shift.»On the keyboard click on" Restore"(Mac users should press a combination" Alt + Restore«);

IOS firmware selection window

4. Open the previously downloaded firmware file with the extension " .IPSW.". For further work, iTunes will take over the end of the process.

The beginning of the iPhone firmware process in iTunes

Is it possible to reset the iPhone settings without updating iOS?

If we talk about the "clean" iPhone restore via iTunes, as a result, the latest version of iOS will be installed on the device, i.e. In fact, the firmware will be updated, and this is not always necessary, especially the owners of jailbroken devices. Why? Because the jailbreak for the actual version of the iPhone firmware appears, as a rule, with a large delay, and as a result, the iPhone update will entail the loss of the jailbreak.

Recovery / Updating "Local" (blocked under a specific operator cellular communication) iPhone with jailbreak entails:

• blocking the "locked" iPhone - you will not be able to connect the device to the mobile network of another operator;
• loss of jailbreak.

Fortunately, there is a way and remove all content from it without updating version of iOS. And without loss of jailbreak. We have already talked about the semirestore utility that allows you to clear the contents of the iOS-device and reset its settings to the factory without loss. Take advantage if you have "locked" or "jabraken" apparatus.

Update iPhone

We have already mentioned that there are 2 ways to update iOS-device for the latest version of iOS:

1. C connection to a computer through iTunes.;
2. Directly from iOS-device via wi-fi.

The first method is practically no different from the recovery of the iPhone on the current firmware version. The second allows you to update the iPhone to the current iOS without connecting to the Wi-Fi computer.

IPhone update from computer via iTunes

1. Connect the iPhone to the computer using a USB cable and run iTunes. Go to the "Devices" menu and select your device;

Selecting a device in iTunes

2. On the Synchronization Settings and device settings page for iTunes, click the left mouse button on " Refresh". Confirm the iPhone update to the current version of iOS.

3. You can save time and do not wait download iOS. On the iTunes service folder, after downloading the current iOS to the hard disk. With the help of a combination " Shift + update»Initiate firmware update from hard disk.

After the update, you will receive an iPhone with an actual iOS "on board", all user content and settings will be saved.

IPhone update via Wi-Fi

With the advent of iOS 5.0, the developers integrated the ability to update the firmware directly into the mobile operating system. Starting with iOS 5.0 and higher, the "Update software" menu is available in the IOS-Device settings. Update is available only when Internet connected to Wi-Fi. Bandwidth Connections to the Internet of cellular networks does not allow you to update the iOS 2G or 3G connections.

1. On the iPhone, go to Settings – Maintenance – Software Update;

Go to update software in iPhone settings

2. Tap on " Download and install"And in the next window, accept the Terms of Use. Wait until the end of the process.

It looks like an iPhone update via WiFi

Recall once again that the iOS update does not entail the loss of user data and content and reset the settings, but it is dangerous for "jailbroken" and "mounted" devices.

Video How to update to iOS 11 via WiFi on iPhone 6S

Video instructions for restoring and updating iPhone

As you could make sure that nothing complicated in flashing the iPhone, which includes and the update and the restoration is not. To learn the elementary skills on the management of IOS devices and is useful, and allows you to save on campaigns to service centers.

If you have any difficulties or when flashing in iTunes errors appear, write to us in the comments, we will try to help you!