Infinite preparation of automatic recovery. Start recovery tool does not work

Each user operating windows systems 10 There are various problems. No error can guarantee any developer. IN previous versions Systems when any problems occur single way Their corrections were reinstalling Windows. Currently, there are many ways to restore the system's performance without its complete reinstallation.

Incorrect starting system

If, after turning on the computer, you saw a notification of automatic recovery with the words "Computer launched incorrectly", then, it means that problems arose in the system. They could appear for the following reasons:

damage to the system itself - system files could be damaged due to incorrect termination of the device, actions malicious programs (viruses) or just with careless handling of them;
damage to the registry system - registry entries can also be corrupted by viruses or programs for cleaning its damage. Therefore, it is always worth making copies of the registry before it changes;
wrong installed update - if the update files loaded not completely or were installed with an error, then you can get such a problem at the next time you start the operating system;
some system loading errors - due to problems hard disk The operating system can be loaded incorrectly.

At the same time, the restart of the computer helps not always. If damage to the system files really happened, then after rebooting, you will again see the same window.

If, after restarting the computer, you received a black screen, then, it means that the system has not been able to load the initial shell of Windows.

Methods for correcting the error when starting the system

The easiest way to restart the computer. If this does not help or the error returns from time to time, it is worth trying to disable fast loading of the operating system. When quickly downloading Windows skips a number of steps that can eliminate this problem. To disable it, do the following:

Press WIN + X and through the menu quick access Open the Control Panel. Open the "Control Panel" through the quick menu
Select the "Power" section. If you do not see it, then change the display mode of the control panel to "large icons".
Select the "Power" section in the "Control Panel"
Select "Actions of the power buttons" for a thinner setting of this section.
Select "Actions Power Buttons" in the left side of the window
Open the "Changing the parameters that are not available now."
Select the section "Changing the parameters that are not available now"
Remove the box next to the "Enable Run" string. Ready, quick start of the operating system is disabled.
Remove the checkbox from the "Enable Run" item and confirm the changes.
Click "Save Changes".

This method will not help if you are not able to get into the system. But in case the error is irregular, it will correct it. In addition, you can run the system in safe mode, and only then perform all the necessary actions. This is done as follows:

Click on the "Advanced Settings" button in the automatic recovery window.
Click the "Advanced Settings" button in the automatic recovery window
Select the "Troubleshooting" menu, and then go to "Advanced Parameters".
Select the Troubleshooting menu »
Click on download options.
Click on "Download Options"
Browse the list of possible options.
Select the Action You need in "Download options" using the F1-F9 keys
Press the F4 key to restart the computer in safe mode.

Video: how to download windows 10 in safe mode

Disable automatic recovery

Solve the problem can also be disconnected by the automatic recovery procedure itself. But note that this will not fix the situation, due to which the message arises, and may even complicate its decision in the future, since without access to the window, it will be more difficult to get into the system recovery option. Therefore, it is worth doing only if you are confident that the appearance of notification of automatic recovery is the only problem. To disable this window, do the following:

Click on the "Advanced Settings" button.
Open the "Advanced Settings" window in the Automatic Recovery menu
Open the Troubleshooting section and select "Advanced Parameters".
Select the Opening of the "Command Line".
Open the "Command Line" in the "Advanced parameters" of the recovery
Enter the bcdedit command. She will show important information On the loading of the operating system.
Find among this information the ResumeObject item and save the data opposite this item.
Copy the information from the "Command Line"
Enter the BCDEDIT / SET (Object) command, where, instead of the word Object, you will need to insert the data saved. Confirm the entry of this command.
Enter a new command with information that you have copied earlier.
The automatic recovery window will no longer distort you, even if the problem with the operating system is not solved yet.

Perform operating system rollback

If nothing helps, it means that you need to start directly to restore the operating system files. And this action can also be performed in different ways.

Return to rollback point

The rollback (recovery) point is the status of computer system files at a certain point in time. To create it, you need to do the following:

Now, in case of problems, you can return to the kickback point. It is possible to do this one of two ways:

Regardless of the method that was selected, you will only have several steps:

Video: How to restore Windows 10 using the recovery point

Resetting the system to initial state

If you return to the recovery point there is no possibility, then you will help the operating system reset to the original state. This action is designed to replace the operating system reinstallation. Windows 10 reset is performed as follows:

Click by windows icon In the left corner of the desktop.
Select the section "Parameters", it is marked with the image of the gear.
Select the "Parameters" section in the Start menu
Open the "Update and Security" item.
Open the "Update and insoleness" section for access to the Windows Update Center
In the contribution of "Restore" to learn the PC Return point in the initial state. After that, click on the "Start" button.
Press the "Start" key under the computer return option to the original state.
Select the desired action in the next window. Consider, when you click on "Delete All" all data from a hard disk, except the operating system, will be deleted.
Specify how the system should enroll with files on your device.
If you decide to get rid of the data, it will take some time to analyze them. Wait for the end of this process.
Wait until the system checks the files on your computer.
Explore information about which programs and applications will be removed from the computer. Check out this list before the continuation.
Check out the information you have made and confirm it by clicking on the appropriate button.

Windows users often encounter the problem of the "blue death screen". What is it? The fact is that damaged system files May lead to the appearance of a critical error that does not allow the computer to start correct operation. In this case, and appears " blue screen" But do not panic! After all, you can eliminate the problem yourself. Let's figure out exactly how.

Causes of the appearance of a blue and black screen

In Windows 10, you may encounter the following error messages: "The computer is launched incorrectly", "the system requires recovery," etc. The reason for their appearance lies in the damaged system files, due to which Windows could not boot.

The system may be damaged due to the incorrect actions of the user itself, which made changes to the registry or disk files of C. or the cause of the breakage can be a virus. Error also sometimes occurs due to incompatibility with third-party drivers or activated fast loading. However, most often the critical error appears due to the interrupted update or incorrectly off the computer. For example, the computer completed the work forcibly, as the power was gone or the voltage jump occurred. The processes and files regulated by them are broken, after which the re-using them becomes impossible.

In case of damage, the system first tries to recover on its own, restarting the computer every time. If after this error is not eliminated, the control is provided to the user. Sometimes it happens that the system freezes and reboots a large number of Once, after which a black screen appears. In this situation, it is necessary to interrupt the procedure and continue the restoration manually.

Video: Danger of "Blue Death Screen" in Windows 10

Automatic system restoration

First, give the computer the ability to independently understand the error. Keep in mind that the automatic recovery procedure can go for more than an hour. In no case are not interrupting it, as this can lead to even more tragic consequences. Go to manual recovery only if the system hung or one of the messages appeared: "The computer is launched incorrectly," it seems, Windows boot incorrectly. "

The appearance of the "blue screen of death" indicates the presence of critical error in system

Reboot

This method will suit you if the system issued a message with a choice of two options: "Restart" and "Advanced Parameters". If it is not, you will have to take advantage of other ways.

What should be done:

After receiving a notification, go to the "Advanced Settings" section.
Start the recovery of the system by turning to additional parameters
Select the troubleshooting unit.
Open the "Search and Fault Correction" tab
Select a section with additional parameters.
Select "Advanced Parameters"
Go to the Download Options tab.
Open the Download Settings section
In the list that opens, click "Restart".
Click "Restart"
A list with download parameters will open. Select the 6th option - support mode command line. Wait until the system restarts and the command line will appear.
Select a reboot with command line support
In the command prompt, execute three commands sequentially:
- sFC / SCANNOW;
- dISM / ONLINE / CLEANUP-IMAGE / RESTOREHEALTH;
- shutdown -r.

Execution of commands takes time wait for their completion

Video: How to eliminate "Blue Death Screen" in Windows 10

Deactivation of quick launch

The reason for the impossibility of recovery can be a quick load activated by default. Since in this case there is no access to the system, you will have to deactivate the function via BIOS:

If this method has not worked, go to the next.

Deactivation of automatic recovery

It happens that the system resorts to restoration without reasonable causes by mistake. Therefore, it is worth trying to prohibit it calling the recovery procedure by following these steps:

When the message appears, go to the optional parameters and call the command line.
In the "Advanced Settings" menu, open the command prompt.
Using the bcdedit command, find the ResumeObject string and copy its value.
Run the bcdedit command to go to the dispatcher windows downloads
Run the bcdedit / set (x) recoveryenabled command, where X is a previously copied string enclosed in curly brackets. After that, exit the command prompt by the EXIT command.
Run BCDedit / Set (X) RecoveryEnabled to disable automatic recovery

Ready! Now try downloading the system.

Manual launch of diagnosis

Going to the command prompt using the method described in the "Deactivation of Automatic Recovery" or "Reboot", follow these commands:

cHKDSK / R C:;
sFC / SCANNOW.

Run the CHKDSK / R C; SFC / SCANNOW command

These commands scan system files and correct the errors found. After executing them, write an exit to exit the command line and check whether the problem disappeared.

Manual system restoration

If none of the described methods helped eliminate the problem, you will have to return the system to the operating state manually. There are several ways to make it.

Point of recovery

This method is good because your data (photos, music, archives and other files) will not be deleted or changed. System settings, updates and driver versions roll up to the state in which they were at the time of creating a recovery point. If it was not automatically created or manually in advance, then use the method will not succeed.

Perform the following steps:

After that, the procedure for rollback will begin, which can last about an hour. Do not interrupt it - it will lead to big problems. As a result of rollback, system files are regenerated, so that errors should not occur.

Reset to factory settings

This method allows you to reset all system settings, installed programs and created tasks, and at the same time save personal data of the user stored in system section. This method Replaces the reinstalling system, allowing you to accomplish it much faster.

Perform the following:

A rollback procedure will start, which can last more than an hour. Do not interrupt it, otherwise the system will damn so much that direct reinstallation cannot be avoided. At one of the stages, you will ask, whether to save personal data or not. If you select the option "Do not save", you can get absolutely clean Windows 10.

Select, save your personal data or not

Manual entry in the recovery menu

For manual login, the recovery menu will require a recovery medium. The installation flash card that has at least 8 GB of memory will be used as it.

To create installation carrier, Follow the instructions:

Insert the flash card into the working computer, find its icon in the explorer, click on it right key and select the "Format" function. Call, create a media in any version of Windows, but the "Format" function is present only in Windows 10. In previous systems You have to use a third-party program, such as USB Disk Storage Format Tool. Formatting format - FAT32.
Before forming a flash card, select Format file System FAT32.
After the format is completed, go to the Microsoft website to the Windows download page and download the installation program.
Go to the Microsoft website and download the system installer
Run the downloaded program. Note that you want to update another device.
Select "Create installation media"
When you are asked to choose the characteristics of the recorded system, specify that the data that coincides with the characteristic system in need of restoration.
Specify the characteristics of the system you want to restore
Specify which media is worth using, and wait for the record. Ready, installation media created.
Specify the media - flash card or disk
After the operation is completed, run the flash card on the non-working computer. To do this, enter the BIOS (how to do this, described in the first step of the point "Deactivation quickly launch») And change the load order so that the connected media dismissed hDD from the first place.
Set the installation media for first place.
Exit BIOS and wait for the installation window appears. Go through the first step of selecting the language, and on the second interrupt the installation procedure by pressing the "system restoration".
Click "System Restore" in the second step of installing Windows

By completing these actions, you will find yourself in the recovery menu and you can use all the instructions described above.

System image generation

If you have another computer with the same features of Windows 10, as the non-working computer, you can write the image image. Thus, you will create a recovery point and you can use the correction method above. windows errors Using the recovery point.

To generate a system image, do these steps:

In the Control Panel menu, go to the "File Story" section.
Specify the media to which the system image will be recorded.

The appearance of a blue or black screen with an error informs the presence of a collection or damaged files in the system. You can fix the problem using the automatic system restore parameters. If it does not work, use one of the methods of manual recovery. Follow the instructions from the article and you will definitely work out!

If a problem occurs, the computer itself decides on the automatic recovery of parameters to the working stage. This is one of the measures of self-defense, if you can call it. However, this process is not always possible to complete. This does not mean that the computer cannot be helped.

In an attempt to restore performance by "rollback" to the previous settings, the operating system fails for several reasons:

due to the power failure, the previous session ended incorrectly;
errors in the work of the installed antivirus program;
too many battered system files or drivers;
registry damage;
worn "";
invalid system folder recognition;
the removable drive prevents (that is why it is recommended to remove all flash cards before recovery).

This is a list, according to experts, the most probable reasons. Most likely, because to bring an exhaustive list of all incidents that do not allow to complete the recovery will not be able to do not be the Aichi master.

That is why representatives of the technical support service of Microsoft officially advise you to launch the restoration of the "windows" version of at least three times. Even if previous attempts were not successful. The fact is that even the Windows Recovery Service is limited. If there are too many problems, it cannot solve them immediately.

Options to force the operating system to earn in proper mode some:

select the recovery item (to which version "roll back" the settings - until the fact that failures were not observed, or at all to factory settings);
through the command line;
in safe mode;
through. boot disk or image;
using recovery environment

Some methods are cleaned excess unnecessary data, others simply "roll back" settings to the working version.

Similar actions are applicable to Windows 8, and to Windows 10.

The easiest way

The easiest way to do this is: After pressing the power button, when the display turns around and the system will start loading, press F8. The system will suspend and asks which boot option to choose. In the menu that opens, you need to select the latest successful configuration.

The operating system will execute the command and the computer will restrict without interference.

Another way to restore manually also forces to any user, even without experience.

If the "Restore" system is not active

Usually this possibility is provided. But sometimes still the computer says that it is not active.

Activation is simple:

Now the settings can be "" to the selected point.

Choose the desired functionThe system will perceive the command and start recovery. It may take up to a few minutes. After the process is successfully completed, a window will appear with a notification that the recovery was managed and can be pressed below the button for immediate reboot.

Preparation of automatic recovery of Windows 10: Black Screen and Causes of Process Cancellation

Users who are downloaded windows version 10, often complain that automatic process Recovery hangs and a black screen appears instead that does not show absolutely nothing.

This happens according to one of the reasons:

the illiteracy of the computer's host (incorrect changes in the system disk or registry);
serious virus;
damaged system files;
incompatibility of drivers;
constant incorrect shutdown with a computer;
interrupted recovery process.

There are three options for the elimination of this incident:

Recovery by secure mode.
Replacing hard drive.
Restoring the settings via BIOS.

You can try to restore manually. This is possible if the start menu is displayed.

Manual recovery by command line

To do this, you need to turn off the machine (long press the starting button), then run again.

The system will be loaded in the right mode and the incidents should not appear more.

Restoration through bios

Attention! This method is suitable if there is a removable medium with a distributional certified "Operation"!

So, it is, you can move to the following actions:

You can insert an external medium with a distribution kit and run a computer.

Sometimes it happens that it is not possible. In this case, unsuccessful recovery is associated with viral infection, to get rid of which it is possible using an antivirus program from an external medium.

Video - Automatic Windows Recovery from Console

The article is dedicated to messages that appear on the Automatic Recovery screen and inform the user that the operating system started incorrectly or the computer is launched incorrectly Windows 10. In the article we will deal with the reasons for their appearance and consider how to get rid of such messages and prevent them.

What should be done first

When alert appears that the PC is incorrectly loaded, you must restart the computer. In cases where the message pops up when rebooting the system due to interruption windows updates, It helps.

The second thing that can be the source of the problem is the abnormal mode of functioning of the power supply, as a result of which the hardware components operate in the mode differing from typical. Due to the two unsuccessful attempts to download Windows 10, the latter calls the system recovery function, thereby providing the user to solve the problem.

Perhaps the cause of the problem are drivers. Remember or look, the drivers of which components were installed last and perform their rollback.

The appearance of the message after resetting or updating Windows

A common algorithm, the execution of which leads to the appearance of an error is the following: Turning on the PC after the update / reset Windows It is accompanied by a blue screen, and after collecting information, a window is launched with options for restoring the operating system.

In this case, go to "Additional Parameters".
Call "troubleshooting".
We again go to "Additional Parameters".
Click "Start Parameters".
We click "Reload".

After restarting the computer, "boot parameters" will open, where you run through the F6 key safe mode With the support of the command line work.

Perform command sequence:

sFC / SCANNOW - checking system files with recovery damaged;
dISM / ONLINE / CLEANUP-IMAGE / RESTOREHEALTH;

The appearance of an error "Computer is launched incorrectly"

It happens that, due to the inclusion of the computer, an alert appears that reports on the implementation of the computer / laptop diagnostics. The latter ends with a blue screen with the text "Computer run incorrectly" and open the "Advanced Settings" recommendation after rebooting.

Specifies this situation on the damage of system files is often the registry.

The culprit of the situation is:

power supply interruptions;
work viruses or antivirus program;
windows 10 updates;
deleting or incorrect values \u200b\u200bof critical to operation of a key.

To solve the problem, we do the following.

1. Go to "Advanced Parameters".

2. Click on the "Troubleshooting" item.

3. Click on the button with the inscription "System Restore".

4. With the active function of creating rollback points, we choose one of the last snapshots of the system and click "Next", then "ready."

Often, the resumption of Windows 10 solves such a problem.

5. If the option is disabled (it should be enabled after returning the system to the operating status), a window appears where you want to select "Troubleshooting".

6. Click "Return PC to the original state", in order to reset Windows 10.

7. Be sure to select an option with maintaining personal files (all the files located on the C \\ disk: files will remain on our own places after Windows reset, but installed programs This does not concern).

Further actions can edit the situation and exacerbate it. Their execution may lead to unexpected consequences. Following the steps below subjected the system at risk, remember this.

Using the command line, as in the past method, check the integrity of the system files, correct damaged, and also restore the registry files from the backup.

8. We execute the "diskpart" command in order to call a tool for working with sections.

9. Enter "List Volume" - a consequence of the execution of the command will be visualizing the list of volumes of all connected to the PC discs.

10. In the list we find a system disk and reserved by the system and remember their letter tags.

11. Close the program by performing "exit".

12. Enter "SFC / SCANNOW / OFFBOOTDIR \u003d F: \\ / OFFWINDIR \u003d C: \\ Windows" and click "Enter".

Here: F - reserved by the system volume or drive (with a loader), C is a system partition.

13. "C:" - go to the system disk where Windows is located

14. MD ConfigBackup - Create a CONFIGBACKUP directory.

15. "CD Windows \\ System32 \\ Config \\" - go to the appropriate folder.

16. "Copy * C: \\ ConfigBackup \\" - copy a directory previously created to it.

17. "CD Windows \\ System32 \\ CONFIG \\ REGBACK \\" - go to the RegBack system folder.

18. "Copy * C: \\ Windows \\ System32 \\ Config \\" - copy the contents of the specified directory to active.

19. Click "A" with the Latin keyboard layout and "Enter" to confirm the overwriting of the files.

These actions will restore the registry files from the automatically created backup.

20. Close the command prompt window and click on the button with the text "Continue. Exit and use Windows 10. "

With a large share of the probability of Windows 10, after performing this simple algorithm it will start.

Cases completely "kill" Windows 10 by manipulations with the registry files are extremely rare, but still happen. If this happened or the actions did not bring the desired result, one of two solutions remains:

Reset Windows 10;
Reinstall the operating system.

The first is done through the "Search / Troubleshooting" item in additional parameters. Even in critical situations, you can get there by using the bootable media with the Windows 10 distribution.

In the second case, you will need a loading flash drive and about 30 minutes of partially free time.

Automatic windows restoration - the first function to which you should resort if operating system An critical error occurred.

Restoration opportunities

IN new windows 8 Microsoft made additional tools to roll back the OS. On the official website, they are disassembled in more detail and even casually mentioned at the presentation. Briefly about the possibilities:

PC restoration without data loss. Used in case of reduction of computer performance;
Reset all settings (basic equipment). Allows the user to completely delete all the files available on the device and return it to the original state;
Return to the recovery point. Allow you to roll back the system to a previously saved state (talk about it below);
System rollback from disk. Not quite new (it was already implemented on the "seven"), but a more perfect function that allows you to restore the OS from the disk. Used in the case when a black screen hangs on the PC.

Since we are not radically configured, we will not use the second possibility with the deletion of all files.

Windows 8 recovery

Click the "Restore" button. After that, the long preparation for the rollback procedure will begin.

We are waiting for the window about the start of the disc check on the failures. This process is short, but after it there may be a characteristic inscription "The facility cannot automatically restore the system." If it happened, moving on.

In the window with the parameters, select the section "Diagnostics":

Not paying attention to the other functions, click on « Restore » :

Comment. In the same window, you can choose to "return to the original state", which will allow you to roll back the system at the time of purchase of the device. Such an action will completely delete all files.

As soon as the preparation is complete, and the OS rollback will be completed, when the computer starts, a report will appear about all programs remote after the procedure.

The utilities were not lost forever, in the report they are represented as references by clicking on which you can again install them.

The presented method is not bad, but relevant only in the case when Windows 8 is partially started. But if the computer just started to feed the signs of refusal: the performance has fallen, failed when working, it is wise not to wait for a complete system failure, but to roll back it using a recovery point.

Creating a Point

We follow the algorithm:

On the Windows 8 panel, we go to the parameter section, and then to the "Control Panel" (in this section, you can go using Win + W search):

In the control panel, go to the "Recovery" section. Do not forget to set the "Minor Icons" parameter in viewing, otherwise this item will not:

Select the recovery point of the recovery point and the disk on which the system is:

Click the setup icon. Turn on the system protection by selecting the appropriate section. Change the maximum use of up to 15%:

Configuration is complete, now you need to create a point and apply it in practice.

To open a point, go back to the control panel to the recovery section, but now instead of setting the clique, create. We enter a description or name for a kickback point.

Comment. The system automatically creates points when the user installs third-party programs on the computer, updates the drivers, etc.

Using the kickback point

If you have noticed that after installing programs, glitches appeared, performance decline, etc., then it's time to use the system rollback. For this:

In the control panel, go to the "Restore" section and then in the OS rollback settings. Click on restore: