Mobile hot spot windows 10 Started file. Create an access point on a PC using a function

Finally, in Windows 10, a standard and simple feature appeared, which allows you to distribute the Internet on Wi-Fi from a laptop, or a computer. This is called the "Mobile Hot-spot" function. This is a separate tab in the parameters on which you can literally run the Wi-Fi access point in several clicks. All you need is to set a name and password Wi-Fi networkwhich will be distributed to the laptop and specify an Internet connection from which the Internet needs to be distributed to your devices.

Now, to distribute the Internet on Wi-Fi in Windows 10, you do not need to perform a complex access point in command lineAs I wrote in the article How to distribute the Internet on Wi-Fi from a laptop in Windows 10, or use third-party programs. It is enough to configure the "Mobile hot spot", and activate the function of the wireless access point. You will also be interested in 8 hidden Windows 10 functions.

So, in order to enable the access point, press the "Start" button on the taskbar and click on the "Parameters" icon or press the key combination + i

Go to the "Network and Internet" section.

In the "Network and Internet" section, open the tab "Mobile hot spot"

In the "Mobile Hot Spot" tab, we see that the name of the wireless network (SSID) and the password are assigned automatically, but you can change the network name and password by clicking on the "Edit" button

In the "Changing Network Information" window, change the network name and network password (at least 8 characters), press the "Save" button

Next in the drop-down list " Sharing Internet connections "Select the connection through which you have connected to the Internet, it does not have to be" Ethernet ", it may be wireless network Or the name of your 3G / 4G modem. See also how to see the password in the browser hidden as stars and how to register at Instagram from a computer.

To start a mobile access point, click on the switch near the "Allow the use of my Internet connection on other devices".

Now that mobile hot spot is configured and any devices with Wi-Fi support can be connected to it. At the same time, 8 devices can be connected to the access point. Information about the connected devices will be displayed in the same window.

I decided to connect my 3G USB modem to the laptop, and try to start the "mobile hot spot". After all, many use the Internet at 3G / 4G modems, and want to distribute it to their mobile devices, without buying a router. This method will suit you, everything works fine.

It will look like this.

Managing the "Mobile Hot Spot" function

Disable the function itself and stop the distribution of the Internet, you can simply install the switch to the "Off" position In a window with settings.

Everything is very convenient and easy to configure. You will also be interested top jokes from Google and Yandex developers and temporary mailbox for registration.

Possible problems When distributing the Internet in Windows 10 through mobile hot spot, and solve them

As I wrote above, in the process of starting the access point, you can encounter different errors. When I tried to launch a mobile hot spot on stationary computer With the TP-LINK TL-WN720NR adapter, I also encountered an error. "Cannot customize Mobile hot spot. Turn on Wi-Fi." What I just did not do, and could not run the virtual network. At the same time, on the same computer, with this adapter without problems it turns out to run the distribution of the Internet through the command line.

Error "Cannot customize Mobile hot spot. Turn on Wi-Fi"

This error looks like this:

According to my observations, this error appears due to problems in the Wi-Fi driver of the adapter, or due to the fact that the virtual adapter is disabled. At the same time, as I have already written above, I could not defeat this error on one computer. Although, there were all in the device dispatcher required driversAnd they worked. Even if your Wi-Fi is turned off with the button, then the mobile hot spot everything starts.

If you think logical, then the problem is definitely not in the absence of the driver wireless adapterAfter all, if the drivers were not, the tabs "Mobile hot spot" would not have anyway. Just like the "Wi-Fi" tabs in the settings.

The problem must be sought in the device manager. First of all, try updating the Wi-Fi driver of the adapter. Reinstall it by downloading from the manufacturer's website. If it did not help, go to the Device Manager, and check if there are "Microsoft Wi-Fi Direct Virtual Adapter" there. It can be with a number at the end. It is through this adapter laptop distributes Wi-Fi in this way.

To do this, you first need to turn on the display of hidden devices. If there is some kind of icon near the "Microsoft Wi-Fi Direct Virtual Adapter" adapter, then click on it with the right mouse button and select "Enter".

A few more decisions

1 Error "Unable to provide for general access This internet connection, as there is no connection to the mobile network. "

I have such an error jumped when you try to run the distribution of the Internet when connecting through a 3G modem. Everything was decided simply restarting the Internet connection. Make sure the Internet on the computer works. You can restart the computer, connect to the Internet and run all over again.

2 Error: "Failed to customize the mobile hot spot, because there is no computer connect Ethernet, Wi-Fi or connection to the cellular network. "

You will most likely see such a mistake only when your computer is really not connected to the Internet. Check the connection.

Also, this error appears in the case when you have the Internet connected via PPPoE (high-speed connection). Mobile hot spot does not sees such connections to the Internet.

3 devices are not connected to the running Wi-Fi network. I did not come across such a problem, but everything could be. Most often, the connection is blocked by antiviruses and firewalls. Disconnect them and check the connection to the network.

Thanks to the function of mobile hot spot, which appeared in last update Windows 10, users can easily share the Internet with other computers and gadgets.

Unlike similar functions on smartphones, creating an access point on a computer provides the best throughput Communication channels and allows you to connect up to 8 devices to one source.

Hot spot (or access point) is an area in the range of which acts an active Internet connection. Access point works thanks to wireless technology Distribution of communication channels.

Before setting, you need to perform check the following parameters:

Version of Windows 10;
Availability of the latest updates of the network adapter drivers;
Check support for the posted network.

Check version OS.

The built-in access point function appeared in the last update of the W10 OS.

Previously, users could not configure the wireless distribution of the Internet without the help of third-party gadgets or programs.

Mobile point option is supported only in version 1607 Update licensed tens.

Before starting the distribution setting, you should check the version used operating system.

Follow the instructions:

Click on the key "Center notifications";
In the left side of the screen, the last events and keys for quick access to system settings. Click on the "Parameters" tile;

In the window that opens, find the "System" tile and click on it;

Open the "On System" tab. On the right side of the window, information on PC parameters and installed OS will appear;
Check the value of the "version" field. For the operation of the mobile spot function will only suit W. 10 U. pDATE 1607 or more a new version Systems.

If the computer is not installed on the computer 1607, check it out for your PC and laptop you can as follows.:

1. Once again, go to the notification center and open the window "Parameters";

2. Click on "Update and Security";

3. In a new window, click on the checkpoint for updates and wait for the process to complete. If you have access to available updates for your PC, the appropriate message appears on the screen with the installation key. To scan and install, you need an active connection to the Internet.

Important! Before installing updates, save the result of all open softwareSince the computer will be rebooted.

Updating Adapter Drivers

After turning on the function, the distribution of the Internet may not be supported by other gadgets due to lack of on PC required drivers Network adapter.

To update software, actions should be performed:

Open Device Manager windowby pressing the right mouse button on the "Windows" button;

In a new window, find the tab "Network adapters" and deploy it. Then click on the right mouse button and click on the "Update Configuration" item. Make sure the connection with the global network is included;

Now network devices Without problems will interact with this feature.

Support for the posted network

The function will not work if the computer or laptop does not support the posted network.

You can check this parameter using the OS command prompt.

Placed Network - This is a technology that allows the system to create one or more virtual adapters based on the physical (which is embedded in the computer).

To verify the option follow the instructions:

Run the command line using the window "Search in Windows";
Enter the following command to the window specified in the picture below. ENTER for execution;

In the system information find the specified in the figure below the string. The parameter value must be positive. Only in this case, it turns out to configure the working distribution of the Internet for other gadgets.

If the network support is missing, it means that you need to purchase an additional physical USB adapter.which works with such a function. The device is connected to the computer and with it is configured mobile access.

Create through the interfaceOS.

If you were convinced that you are using the correct version, I downloaded the latest drivers for network adapters and checked the support of the posted network, you can start setting up distribution.

Pre-checking all functions will allow not encountered errors as a result of creating an access point.

Easy way to create spot - use the interface Windows :

1. Go to the window "Windows Settings" and click on the section "Network and Internet";

2. In the list "Sharing" Select the connection type to the Internet that is used on the computer. Wireless connection - A Wi-Fi router is connected to the PC, Ethernet - Connecting through the cable, 3G. - Connection with a global network through a 3G modem. If at the moment the PC is connected to the Internet with only one type of connection, the system will automatically determine it;

3. Open the tab "Mobile Hot Spot" and on the right side of the window activate the inclusion slider;

Also, the window will feature information for connecting to the network. Network Name is the name of your computer you set up during the initial Windows setup.

The password is determined by a set of random characters. You can change these parameters by creating more reliable password or new network name.

Just click on the key "Change" and enter the desired values \u200b\u200bin the window that opens:

Now the created access point will be displayed on all devices that work with Wi-Fi networks. Run the scanning of available networks and select the name of the earlier access point. Enter the password and connect. Internet connection on another gadget will be actively as long as the computer is enabled on the computer "Mobile Hot Spot".

On the computer, in the creation and setup window, the number of devices that are connected to the distribution of Wi-Fi will be displayed.

Also, you can view the device name, its IP address and physical identifier.

Distribution using the command line - suitable for all versionsWindows

This option to create hot spot suitable for all versions of the system Windows 10 . The only minus method - the function with the function does not happen through the operating system program interface, and through the command line:

Open the command line on behalf of the administrator;
Enter the following command below, where NetworkName. - this is the name of the network, NetworkPassword. -pal access;

As a result of a successful execution of the team the following message will appear:

Solving trouble

When you try to create, an error message may appear in the functions window. So far, the problem is not eliminated, you can not use the function.

We will analyze all types of errorswhich can meet in the process of adjusting the access point.

Hotspot Setup Error

If you see a message that you failed to configure, to start, check the connection to the router.

Access point is not created due to the fact that there is no connection to the Internet in the computer.

Check Wi-Fi Connection Status Or connecting to another router by clicking on the appropriate symbol on the main panel of the elements. The inscription will be displayed near the network with active connection. "Connected", but not "Without Internet access". Otherwise, restart the router and try the connection.

Missing network connection

Another type of error is that due to the lack of the necessary drivers of network adapters, the system cannot configure the point. The Internet is on the computer, but it is not created.

If in the Settings window you see the same message as in the figure below, perform the driver update. The update instruction was described above in the form of a separate subsection.

After updating the driver, go to "Windows Settings" and open the tab "Network and Internet".

Then select "Condition" In the open window, click on the field "Network Reset". Then connect to Wi-Fi, Ethernet or the modem is reused.

Gadgets are not connected to hotspot. What to do?

There are cases when the user has made a distribution and no system error messages appeared, but other gadgets cannot connect to hotspot.

In this case, you need to disable the fayer of the computer. Standard or third-party anti-virus software can block the function of sharing the global network.

To disable Standard « Windows Defender» , in the OS Parameters window, open the field "Defender" And deactivate the function as shown in the figure below.

Then disconnect and start the re-mobile access. Now the gadgets must easily connect to the distribution of the Internet.

Advantages of connection

Use the following advantages:

Mobility . The user can configure the access point anywhere, regardless of its location or external conditions. The only requirement is the availability of the Internet on the PC;
Wireless connection . Internet distribution does not require availability additional programs, adapters or gadgets. Use only your PC and another device to be connected to the global network;
Data transfer rate reaches 11 Mbps . It is worth noting that the connection speed also depends on tariff plan Provider, and on the number of devices connected to the point of access. Than them are less, the speed of the Internet is better;
Easy setup function . It can be created in a few minutes with windows interface 10;
Hot spot beneficial to use On travel, business trips and just in everyday life, because you do not need to connect a paid tariff for using the Internet for each of your computer and smartphone. Enough and one device that has access to the Internet.

Rules for safe use of the access point

If you care about the safety of your data (information on payment cards, logins, passwords, messages), always follow rules for safe use of the HotSpot function:

When creating distribution for the network, always set a challenging access password . You can not leave the access point free for the use of unauthorized gadgets. The password should consist of the numbers and letters of the upper and lower register, as well as from special symbols;
If a computer or smartphone has found a free access point in a public place, it should be connected to it only if you are not going to make any payment operations or enter login / passwords in the browser. An attacker can easily learn this data in open network. Another way out of the safe use of free networks is programs for creating VPN. ;
If you still need to use an unreliable open network and log in to the site, use two-factor authorization . It can be enabled in the settings social network, online banking or mail client. To enter the site, you will need to enter not only a pair of login password, but also unique code Access that will come to the attached number in the form of an SMS message.

Thematic videos:

Before setting up the wireless access point, make sure that there is an Internet connection and a Wi-Fi adapter works.

How to enable wireless access point in Windows 10 settings

To configure a wireless access point in Windows 10, you can do without special programs and enter commands into the console. It is enough to make a couple of clicks in the "parameters".

Click on the "Start" menu on the gear "Parameters" → "Network and Internet" → "Mobile hot spot".

In the "Sharing Internet Connection", specify the connection through which the computer gets access to the Internet. For example, Ethernet.

Under these networks, click on "Change".
In the form that opens, specify the network name and password - their users will enter to connect. Save them.

Top Page Include "Allow the use of my Internet connection on other devices".

Ready. You can connect to the hot spot to eight devices by the name of the network and password. And you can disable the distribution of the Internet in the same place where the wireless connection is turned off - in the "Network" window on the taskbar.

And a small lifehak: so that the hot spot does not work to be frightened, you can run it remotely from another device. The function is activated in the same access point settings and works if you turn on Bluetooth on both devices and connect them to each other.

What to do if mobile hot spot on windows 10 does not turn on

And here the most interesting part begins. Configure the wireless access point in parameters is very simple in theory, but in practice, many users of the system gives one of the errors.

The author, for example, it turned out "It is not possible to set up a mobile hot spot. Turn on Wi-Fi. " Judging by the requests to Google and themes on the forums, this problem is often encountered and its reason can wage in the Wi-Fi adapter driver.

There are several solutions to the problem.

Reset settings: "Network and Internet" → "Condition" → "Network Reset".
Delete a Wi-Fi driver and download new on the manufacturer's website. If the manufacturer has not released drivers for Windows 10 (as in the case of a five-year-old author's laptop), you can download the driver for Windows 8.
To see if the Microsoft virtual adapter is in the list of "Device Manager", and turn it on.
Spit on all this and set up hot spot in.

How to configure a wireless access point via Windows 10 command prompt

If the light path did not work, then this, most likely, will help distribute the Internet.

Right-click on the "Start" button, in the menu that opens, select "Command Line (Administrator)" and alternately enter the following commands to it.
- nETSH WLAN SHOW DRIVERS - To find out whether the Wi-Fi device has a distribution. In the text that appears in the Text window, find the "Support of the Placed Network" line and make sure that it is indicated "Yes." If "No", try reinstalling or rollback of the driver and try again.

netsh WLAN Set HostedNetwork Mode \u003d ALLOW SSID \u003d Stacy Key \u003d 4419e1z # - To create hot spot. Only instead Stacy and 4419e1z # Enter your network name and password.
netsh Wlan Start HostedNetwork - To start the wireless access point.

Right click on the "Start" button again, select " Network connections»→ Right click on the current connection →" Properties ".

Open "Access", check in the "Allow other network users to use Internet Connecting to the Internet this computer" And in the below section, select the "Connection on the Local Network ..." section below.

Everything, you can now connect your device to hot spot, as any sources of Wi-Fi: Select your network in the list of available, enter the password and use.

You can turn off the distribution of the Internet by the Netsh Wlan Stop HostedNetwork command.

Thanks to the function of mobile hot spot, which appeared, users can easily share the Internet with other computers and gadgets.

Building:

Check version OS.

The built-in access point function appeared in the last update of the W10 OS.

Previously, users could not configure the wireless distribution of the Internet without the help of third-party gadgets or programs.

Mobile point option is supported only in version 1607 Update licensed tens.

Before starting the distribution setting, check the version of the operating system used.

Follow the instructions:

Click on the key "Center notifications" ;
On the left side of the screen, the last events tab and the shortcut keys will appear. Click on the "Parameters" tile;

In the window that opens, find the "System" tile and click on it;

Open the "On System" tab. On the right side of the window, information on PC parameters and installed OS will appear;
Check the value of the "version" field. For the operation of the mobile spot function will only suit W. 10 U. pDATE 1607 or a newer version of the system.

If the computer is not installed on the computer 1607, check it out for your PC and laptop you can as follows.:

1 Once again, go to the notification center and open the window "Parameters";

2 Click on "Update and Security";

3 In a new window, click on the checkpoint for updates and wait for the process to complete. If you have access to available updates for your PC, the appropriate message appears on the screen with the installation key. To scan and install, you need an active connection to the Internet.

Important! Before you start installing updates, save the result of all open programs, as the computer will be rebooted.

Updating Adapter Drivers

After switching on the function, the distribution of the Internet may not be supported by other gadgets due to the lack of the necessary network adapter drivers on the PC.

To update the software, actions should be performed:

Open Device Manager windowby pressing the right mouse button on the "Windows" button;

In a new window, find the tab "Network adapters" and deploy it. Then click on the right mouse button and click on the item "Update configuration". Make sure the connection with the global network is included;

Now network devices will easily interact with this feature.

Support for the posted network

The function will not work if the computer or laptop does not support the posted network.

You can check this parameter using the OS command prompt.

To verify the option follow the instructions:

Run the command line using the window "Search in Windows";
Enter the following command to the window specified in the picture below. ENTER for execution;

In the system information find the specified in the figure below the string. The parameter value must be positive. Only in this case, it turns out to configure the working distribution of the Internet for other gadgets.

Create through the OS interface

If you were convinced that you are using the correct version, the last and checked the support of the posted network, you can start setting up distribution.

Pre-checking all functions will allow not encountered errors as a result of creating an access point.

Easy way to create spot - use the interface Windows :

1 Go to the window "Windows Settings" and click on the section "Network and Internet";

2 in the list "Sharing" Select the connection type to the Internet that is used on the computer. Wireless connection - to PC connected, Ethernet - Connecting through the cable, 3G. - Connection with a global network through. If at the moment the PC is connected to the Internet with only one type of connection, the system will automatically determine it;

3 Open tab "Mobile Hot Spot" and on the right side of the window activate the inclusion slider;

Also, the window will feature information for connecting to the network. Network Name is the name of your computer you asked during the initial one.

The password is determined by a set of random characters. You can change these parameters by creating a more reliable password or a new network name.

Just click on the key "Change" and enter the desired values \u200b\u200bin the window that opens:

Now the created access point will be displayed on all devices that work with. Run the scanning of available networks and select the name of the earlier access point. Enter the password and connect. Internet connection on another gadget will be actively as long as the computer is enabled on the computer "Mobile Hot Spot".

On the computer, in the creation and setup window, the number of devices that are connected to the distribution of Wi-Fi will be displayed.

Also, you can view the device name, its and physical identifier.

Distribution using the command line - Suitable for all versions of Windows

Open the command line on behalf of the administrator;
Enter the following command below, where NetworkName. - this is the name of the network, NetworkPassword. -pal access;

As a result of a successful execution of the team the following message will appear:

Solving trouble

When you try to create, an error message may appear in the functions window. So far, the problem is not eliminated, you can not use the function.

We will analyze all types of errorswhich can meet in the process of adjusting the access point.

Hotspot Setup Error

If you see a message that you failed to configure, to start, check the connection to the router.

Access point is not created due to the fact that there is no computer.

Missing network connection

Another type of error is that due to the lack of the necessary drivers, the system cannot configure the point. The Internet is on the computer, but it is not created.

If you see the same message in the settings window as in the figure below, perform. The update instruction was described above in the form of a separate subsection.

After updating the driver, go to "Windows Settings" and open the tab "Network and Internet".

Then select "Condition" In the open window, click on the field "Network Reset". Then connect to Wi-Fi, Ethernet or the modem is reused.

Gadgets are not connected to hotspot. What to do?

There are cases when the user has completed a distribution and no system error messages appeared, but other gadgets cannot.

In this case, you need to disable the fayer of the computer. Standard or third-party anti-virus software can block the function of sharing the global network.

To disable Standard "Windows Defender", in the OS Parameters window, open the field "Defender" And deactivate the function as shown in the figure below.

Then disconnect and start the re-mobile access. Now the gadgets must easily connect to the distribution of the Internet.

Advantages of connection

Use the following advantages:

Mobility . The user can configure the access point anywhere, regardless of its location or external conditions. The only requirement is the availability of the Internet on the PC;
Wireless connection . Internet distribution does not require additional programs, adapters or gadgets. Use only your PC and another device to be connected to the global network;
Data transfer rate reaches 11 Mbps . It is worth noting that the connection speed also depends on the provider's tariff plan, and on the number of devices connected to the point. Than them are less, the speed of the Internet is better;
Easy setup function . It can be created in a few minutes using;
Hot spot beneficial to use Traveling, business trips and just in everyday life, because you do not need to connect a paid tariff for using the Internet for each and. Enough and one device that has access to the Internet.

Rules for safe use of the access point

If you care about the safety of your data (information on payment cards, logins, passwords, messages), always follow rules for safe use of the HotSpot function:

When creating distribution for the network, always set a challenging access password . You can not leave the access point free for the use of unauthorized gadgets. The password should consist of the numbers and letters of the upper and lower register, as well as from special symbols;
If a computer or smartphone has found a free access point in a public place, it should be connected to it only if you are not going to make any payment operations or enter login / passwords in the browser. An attacker can easily learn this data in an open network. Another way out of the safe use of free networks is programs for creating VPN. ;
If you still need to use an unreliable open network and log in to the site, use two-factor authorization . It can be enabled in the settings of the social network, online banking or postcase. To enter the site, you will need to enter not only a pair of login password, but also a unique access code that will come to the attached number in the form of an SMS message.

Thematic videos:

Finally, in Windows 10, a standard and simple feature appeared, which allows you to distribute the Internet on Wi-Fi from a laptop, or a computer. This is called the "Mobile Hot-spot" function. This is a separate tab in the parameters on which you can literally run the Wi-Fi access point in several clicks. All you need is to ask the name and wi-Fi password The network that the laptop will be distributed and specify an Internet connection from which the Internet needs to be distributed to your devices.

Now, in order to distribute the Internet by Wi-Fi in Windows 10, you do not need to perform a challenging access point through the command line, as I wrote in the article How to distribute the Internet on Wi-Fi from a laptop in Windows 10, or use third-party programs. It is enough to configure the "Mobile hot spot", and activate the function of the wireless access point. You will also be interested in 8 hidden Windows 10 functions.

So, in order to enable the access point, press the "Start" button on the taskbar and click on the "Parameters" icon or press the key combination + i

Go to the "Network and Internet" section.

In the "Network and Internet" section, open the tab "Mobile hot spot"

In the "Changing Network Information" window, change the network name and network password (at least 8 characters), press the "Save" button

Next, in the "Sharing Internet Connection" drop-down list, select the connection through which the Internet is connected with you, it does not have to be "Ethernet", it can be a wireless network or the name of your 3G / 4G modem. See also how to see the password in the browser hidden as stars and how to register at Instagram from a computer.

To start a mobile access point, click on the switch near the "Allow the use of my Internet connection on other devices".

It will look like this.

Managing the "Mobile Hot Spot" function

Disable the function itself and stop the distribution of the Internet, you can simply install the switch to the "Off" position In a window with settings.

Everything is very convenient and easy to configure. You will also be interested top jokes from Google and Yandex developers and temporary mailbox for registration.

Possible problems when distributing the Internet in Windows 10 through mobile hot spot, and solve them

As I wrote above, in the process of starting the access point, you can encounter different errors. When I tried to start the mobile hot spot on a stationary computer with the TP-LINK TL-WN720NR adapter, I also encountered an error. "Unable to configure mobile hot spot. Turn on Wi-Fi." What I just did not do, and could not run the virtual network. At the same time, on the same computer, with this adapter without problems it turns out to run the distribution of the Internet through the command line.

Error "Cannot customize Mobile hot spot. Turn on Wi-Fi"

This error looks like this:

According to my observations, this error appears due to problems in the Wi-Fi driver of the adapter, or due to the fact that the virtual adapter is disabled. At the same time, as I have already written above, I could not defeat this error on one computer. Although, there were all the necessary drivers in the device manager, and they worked. Even if your Wi-Fi is turned off with the button, then the mobile hot spot everything starts.

If you think it is logical, then the problem is definitely not in the absence of a wireless adapter driver, because if the drivers were not there, then the tabs "Mobile hot spot" would not have been. Just like the "Wi-Fi" tabs in the settings.

A few more decisions

1 Error "Unable to provide for shared access this connection to the Internet, as there is no connection to the mobile network."

2 Error: "Failed to configure mobile hot spot, because the computer does not have an Ethernet connection, Wi-Fi or connection to the cellular network."

You will most likely see such a mistake only when your computer is really not connected to the Internet. Check the connection.

Also, this error appears in the case when you have the Internet connected via PPPoE (high-speed connection). Mobile hot spot does not sees such connections to the Internet.