FlashTool - 5.1844.00.000 - flashTool program is designed to work with chinese phones. The program provides the ability to deduct and record Fulla into phones, as well as format

• Genre: software for firmware
• Activation: free, not required
• English language

Firmware MT67 **

Please note that smartphones / tablets with chipsets 67 ** You need to flash a flashlight at least with a version v5.1444.00.000

[*] USB debug [*]

Do not forget to turn on USB debug!

### -\u003e flashing instructions via Flashtool Changing computer parameters -\u003e General -\u003e Special download options -\u003e Reload now.
When you turn off, click Diagnostics -\u003e Advanced Settings -\u003e Download Options -\u003e Reload.
After the menu appears, select "Disable mandatory driver signature check.

Disable the signature check on Win8.1 is done so:

Win + i -\u003e Parameters -\u003e Changing Computer Settings -\u003e Update and Recovery -\u003e Restore -\u003e Reboot Now.
When you turn off, click Diagnostics -\u003e Advanced Settings -\u003e Download Options -\u003e Reload.
After the menu appears, click F7 and wait for the computer to restart.
Next, installing drivers according to the instructions.

At the time of connecting the phone to the computer, you see that your device appears in the "Android Composite Abd Interface" section with a yellow triangle icon, you specify the device path to the driver to the driver, but the device manager means that everything is fine with the drivers and does not want to update them You need to make the edit of the file where you need to register PID \\ VID, so this data you need to first learn from your computer. Right-click on the device with a yellow triangle, properties, device ID. There will be 2 lines. Here these lines must be duplicated in the file with drivers. Then you will need to re-specify the path to this drive.

Example:

android_winusb.inf - in this file making changes


% SingleadBinterface% \u003d USB_Install, USB \\ Vid_0BB4 & PID_0C01
% CompositeadterFace% \u003d USB_Install, USB \\ Vid_0bb4 & PID_0C01 & REV_0255

vid \\ pid may change, put your values

p.S: This is a SP Flash Tool - for flashing Chinese devices and not only. But do not confuse with FlashTool for Sony Xperia.

Important information

Please note if you are MT6575 and MT6577: You need to flash preloader and DSP_BL only in case of brick lifting! In all other regular updates and flashing, do not put these ticks in SP Flash Tool and do not turn on the formatting (then in the house. Conditions do nothing already, and incur in the service). The thoughtless firmware of these sections is a useless and very risky lesson, especially on MT6575 and MT6577.
Try not to flash the Preloader file without more need and do not turn on formatting (for all other)

Folder with a firmware and firmware copy to the root of the system disk and work out of it (do not create yourself additional problems)

In different parties, the phonows are changing hardware components that cannot work correctly with firmware for similar devices from the previous batch. The most interesting thing is that they, often, do not even indicate that this is another revision. What is it? Yes, that before the firmware, always make a complete ROM-backup.

• MT6573 / MT6513 / MT6575 / MT6515 / MT6577 / MT6517


• MT6589 / MT6572 / MT6570 / MT6582 / MT8135 / MT6592 / MT6571


• MT8127 / MT6595 / MT6752 / MT2601 / MT8173 / MT6795 / MT6798 / MT6799


• MT6735 / MT6535M / MT6753 / MT8163 / MT8590 / MT6580 / MT6757D / MT8167


• MT6755 / MT6797 / MT6737T / MT6737M / MT6750 / MT6757 / MT6757 / MT0690

Previous version 5.1804.00.000 updated to relevant on 05.08.2018 - 5.1828.01.000
Before that, appeal this version 5.1708.00.000
Version 5.1640.00.000 Updated to 5.1708.00.000

SCAT file 26.27.28.29 for FlashTool.txt is in the archive
Support Customer Parameter Feature Which Download Customized Binary In CBR Region.
Support Winbond OTP Function
1) There Are Four Security Register Banks (OTP) in Winbond Flash. The bank0 is reserved by WinBond for Future Use. We only use bank1 ~ bank3. One Banks Size IS 0x100. USER COULD Directly Use 0x0 to 0x300 Address That The Flashtool Driver Will Direct These Address from Bank1 to Bank3
2) The Winbond Flash Unique Feature Is The Security Register Banks Are Not One-Time-Program. That Could Be Erase by Specific Command. IN ORDER TO PREVENT FORMAT THESE REGIONS, User Must Use "Lock" These Regions in Order to Prevent Data Changed in Security Banks.
Bug fixes:
Fix The Bug About Create CBR FAIL CAUSED FROM BAD BLOCK MANAGEMENT METHOD
Enhancements:
Mmaa Support 4 Flash ID COMPARISON.
Memory Support:
Add New Serial Flash: SF_N25W064A11EF640F, SF_MX25U12835FZNI_10G AND SF_MX25L12835EMI_10G.
Note: SV5 Platform: MT6251, MT6276. SV3 Platform: Other Chips

Smart Phones Flash Tool (SP Flash Tool) - a utility designed for firmware of devices built on the MediaTek hardware platform (MTK) and running the Android operating system.

Almost every user of the Android device is familiar with the word "firmware". Someone could hear about this procedure in service centerSomeone read on the Internet. Not few of these users who mastered the art of firmware smartphones and tablets and successfully apply it in practice. It is worth noting that in the presence of high-quality and reliable tools - the program for the firmware - learn how to spend any manipulations with the Android-devices software is not so difficult. One of these solutions is the SP Flash Tool application.

MEDIATEK and Android hardware combination is one of the most common solutions in the smartphone market, tablet PCs, TV consoles and many other devices, so the SP Flash Tool application is used in most cases, if necessary, make the MTK-devices firmware. In addition, SP Flash Tool is in many situations a non-alternative solution when working with MTK devices.

After starting the SP Flash Tool, the app immediately proposes to perform the main function - downloading software to the device flash memory. This speaks immediately open tab "DOWNLOAD".

The android device firmware procedure using SP Flash Tool is carried out practically in automatic mode. From the user, in general, you need to specify the path to image files that will be recorded in each section of the device's memory. Flash memory MTK device is divided into multiple partition blocks and in order not to manually point exactly what data and which memory item to enter, each firmware for SP Flash Tool contains a scatter file - essentially a description of all sections of the device's memory in understandable for the program-firmware form. Just load a scatter file (1) from the folder containing the firmware and files Automatically distributed by the program "in its place" (2).

An important component of the Main Window Flashtool is big picture Smartphone in the left side. After downloading the scatter file, the "screen" of this smartphone is displayed. Mtxxxx.where xxxx is a digital model encoding central processor Devices for which the firmware downloaded to the program are designed. In other words, the program already in the first steps gives the user the ability to check the applicability of the downloaded firmware for specific device. In most cases, if the processor model displayed by the program does not coincide with the real platform used in the device being stitched, it is necessary to refuse firmware. Most likely incorrect image files downloaded, and further manipulations will result in errors in the program and, possibly, damage to the device.

In addition to selecting file-images, the user is given the ability to select one of the firmware modes in the drop-down list.

• "DOWNLOAD" - This mode assumes the possibility of a complete or partial firmware of sections. Used in most cases.
• Firmware Upgrade. The mode assumes only the full firmware of the sections specified in the scatter file.
• In mode "FORMAT ALL + DOWNLOAD" Initially, a complete cleaning of the device flash memory is performed from all data - formatting, and after cleaning - a complete or partial partial entry. This mode applies only with serious problems with the device or in the absence of success when firmware in other modes.

After defining all parameters, the program is ready to record device partitions. To transfer the flash station to the standby mode, the button for the firmware is used. "DOWNLOAD".

Backup Flash Memory Sections

The device firmware function is the main in the flashlight program, but far from the only one. Manipulations with memory sections lead to the loss of the information contained in them, so to save important user data, as well as the "factory" settings or complete backup Memory need backup device. In the SP Flash Tool the ability to create a backup to become available after the transition to the tab "READBACK". After making the necessary data - the storage locations of the future backup file and the instructions of the initial and end address of the memory blocks for the redundancy - the procedure is started by the button «READ BACK».

Formatting flash memory

Since in its destination SP Flash Tool is a service utility, the developers could not not add a flash memory format function to their solution. This procedure in some "severe" cases is a necessary step before carrying out other operations with the device. Access to formatting features is carried out when switching to the tab. "Format".
After selecting automatic - "AUTO FORMAT FLASH" or manual - "MANUAL FORMAT FLASH" Procedure mode, it starts to press the button "Start".

Full memory test

An important step when identifying hardware problems with MTK devices is to test flash memory blocks. Flashtool, as a full-fledged working tool of the service engineer, provides the ability to carry out such a procedure. Memory test function with the choice of the required blocks is available on the tab. "Memory Test".

reference system

The latter not considered above in the program available to the user SP Flash Tool when you go to the tab "Welcome" - This is a kind of reference system, where information about the main possibilities and modes of operation of the utility is very superficiated.

All information is set forth on english languageBut even knowing it at the level of high school, it is not difficult to understand, besides there are pictures that displays actions and their consequences.

Programs settings

In conclusion, it is worth noting the SP Flash Tool settings section. Calling the settings window is made from the menu "Options"containing the only point - "Option ...". The list of settings available for change is quite sozden and in reality their variations are not enough for what.

Single window sections "OPTION"representing practical interest is "Connection" and "DOWNLOAD". With the help of item "Connection" The computer's hardware interfaces is configured through which the device is connected for various operations.

Section "DOWNLOAD" Allows you to specify the program to check the hash-sum of the image files used to transfer to the device to check their integrity. This manipulation allows you to avoid some errors in the firmware process.

In general, we can say that the settings section does not provide a serious change in functionality and in most cases users leave the values \u200b\u200bof its default items.

Dignity

• The program is free of charge to all users (many similar service utilities for other hardware platforms "closed" for ordinary users by the manufacturer);
• Does not require installation;
• The interface is not overloaded with extra functions;
• Works with a huge list of Android devices;
• Built-in protection against "rough" user errors.

disadvantages

• Lack of Russian language in the interface;
• In the absence of proper preparation of devices for manipulation and incorrect user actions, the utility can damage the software and hardware part of the device being stitched, sometimes irretrievably.
Windows 7, 8, 8.1, 10, XP, Vista

SP Flash Tool - Program for the firmware android devices based on MediaTek chips (MTK). Unfortunately, sometimes quality chinese firmware leaves much to be desired, otherwise the manufacturer stops updating the phone. Some functions stop working, the smartphone begins to quickly discharge and the desire to acquire a new one appears. Extend to him life will help independent flashing Using the popular SP Flash Tool and Computer program.

Capabilities

Note! During the firmware, unforeseen situations may occur. All actions The user performs at its discretion. Loading data using a third-party program may result in errors. It should be previously examined on specialized precautions forums, detailed instructions And choose the working version of the firmware of your smartphone. This is especially true for custom (created by simple users based on official) software. The manufacturer will refuse warranty service when the "unofficial" intervention is found in the operation of the device.

The SP Flash Tool program has such features:

• firmware / flashing the original version of Android. Manufacturers often forget about their creations, even came out not so long ago. Android version with new frills may not come to the phone. But if its characteristics allow you to install it, then you can do it using a computer and Flash Tool. There are such cases: the manufacturer itself adds its own innovations into the usual firmware. You can put a "clean" version if they did not like to taste. Moreover, they work freeze. The flashing saves from the brakes of the system, removing the extra and accumulated garbage.
• firmware with custom (unofficial) software. Special for third-party developers improves performance, appearance And adds previously inaccessible capabilities.
• getting root rights (superuser). Opens previously inaccessible to simple user capabilities. The manufacturer specially underestimates the characteristics of the phone (for example, that the volume level invested in the permitted indicators of the EU special commissions) - this can be corrected.
• installing third-party recovery (recovery). Allows you to make a backup or restore from it, install custom firmware, updates and fixes OS, format a memory card, etc.

Before the firmware you need to fully charge the phone, otherwise it slows down the battery. And if it is not enough for the whole process, it will lead to errors or a complete breakdown.

Pros and cons

Main advantages:

• completely free and accessible to everyone (many similar programs for other platforms are not available for ordinary users);
• works immediately without installing on a PC;
• easy to handle;
• support for a wide list of android devices;
• protection against "serious" user errors.

Basic Disadvantages:

• lack of a Russian-language version;
• the lack of preparation and incorrect actions may result in errors or even to complete device breakdown.

Download

SP Flash Tool can be downloaded for free from our site. This program will help "extend" the life of the beloved gadget. In the case of the slightest uncertainty, it is better to consult on the relevant forum.

Sp Flash Tool - Smart and convenient tool designed to firmware devices built on the basis of MediaTek chipsets. If you decide to flash an Android smartphone or a tablet with such a processor "under the hood", then you need to take care of the opportunity to make backup ROM apparatus if something goes wrong. In addition to the usual reason (precautions), there is another reason here: not every firmware you chose can approach specifically for your device. Therefore, it is necessary to make sure that the requirements for the characteristics of the display, the amount of memory and the other regulatory new firmware The parameters are fully observed. Otherwise, the software, and with it the device, may be partially or completely inoperative. Practice shows that when the Android-smartphone firmware is coincided with the SP Flash Tool, it goes smoothly, but we still decided to lead the backup instructions.

Creating a full backup of the flash memory of the smartphone

To create a backup copy of the Android-smartphone flash memory, you must have the utility itself and.

1. Run the flash drive, then in the "Download" tab, download the scatter file (it can be borrowed from the Android device with a similar processor). Do not be afraid if you do not see any firmware files in the folder with the Scatter file - this is normal. Leave a tick on the first line (Preloader), remove the rest.

2. Determine how much information and from where you need to read. After that, go to the "Memory Test" tab. Here, too, only one tick on " Ram Test", the rest must be removed.

Next, act in the following way:
2.1. Press the START button;

2.2. Through the USB port, connect the android device turned off to the PC;

2.3. The memory test that will occur after the connection will show you the information you need on the EMMC blocks (not pay attention to the blocks with zero volume, you will need only having size;

3. Copy the information received into Notepad, then go to the "Readback" tab and click "Add".

3.1. Double click on the appeared line;

3.2. Set the file name (by default ROM_0), and also specify the place where the memory block will be saved;

3.3. Focusing on the data obtained earlier, fill out three parameters in the window that appears.

You received the names of your regions, the size is known, and the starting address in each of them will be 0x0.
Example:
Region: Emmc_user Start Address: 0x0 Length: 0x3ab400000
After filling in the parameters, it remains to click the "OK" button.

note : on the device taken as an example, there are 4 regions, but this does not mean that they are as much on other gadgets. Flash memory can be 3, 2 or even one region ("User"). In the latter case, you do not have to choose the region - in the menu, designed to enter the block read options, this option will be absent. As a rule, such a situation occurs when working with Android devices based on the chipsets of the early anniversary.

3.4. Press the "READBACK" button, reconnect to the USB port of the off gadget - reading will begin;

3.5. After the block reading is completed, repeat the manipulation described in clause 3 with all other regions.

So you get a full copy of your Android flash memory.

If you decide to use the Sp Flash utility, it is easier to take to firmware (modified recovery for your device) and download the appropriate MTK gadget processor to the home computer. All old drivers belonging to Android devices will need pre-delete. You will also need to download the option for Windows or Linux. And do not forget that the SP Flash Tool utility for MTK devices can be compatible with a 32 or 64-bit version of the PC OS - it is important to choose the correct corresponding system installed on the home computer.

From the hardware will be needed:
1. Home windows computer / Linux;
2. Good USB cord for switching with an Android device;
3. Android smartphone or tablet PC.

SP Flash Tool can flash devices based on MT 6575 chipset, MT6577, MT6577T, MT6582, MT6572, MT6582, MT6572, MT6589, MT6589T.

Installation Driver

Suppose that your PC already has an archive of drivers - for example MTK_DRIVERS.RAR.. The first step is to turn off the smartphone or tablet and run the "Device Manager" from the control panel. Connect the Android device to a computer via USB cord and wait until the "Dispatcher" updates and detect an unknown device. Next, you need to act very quickly: while the smartphone has not switched to charging mode, right-click on an unidentified device and select the item in the window that opens. Refresh Driver".

Driver installation is performed manually. In the next window, select "Install the driver from the specified location", then specify the path to the driver archive (it must be pre-unpacked) and set the desired one. Now you can disconnect the Android device from the PC, but it is too early to turn it on. But you can go directly to the firmware itself.

Instructions for firmware smartphones based on MTK

Here we give a complete step-by-step instructionsBy following which you can independently perform an Android-smartphone firmware or tablet based on MediaTek processors.

1. Download the SP Flash Tool and unpack the archive to the computer;
2. If you have a device with a MT6575 or MT6577 processor based on the AGOLD project, download the SP_MDT program to the computer with the ability to select components in UBoot and unpack it;
3. Download and install VCOM USB drivers;
4. Unpacking the archive with the factory firmware for your Android device (the name of the directory for the unpacked folder with the factory firmware files should not include the Cyrillic characters);
5. Turn off your smartphone or tablet, the USB cord must not be connected to the computer;
6. Remove the battery, then insert it back;
7. If the drivers are not yet installed, connect the machine to the PC by using a USB cord. Operating system After that, find a new device, and you must specify a folder with the USB VCOM driver for your OS version. Install the drivers and disconnect the PC cord.
8. Run SP Flash Tool;

9. Click on the Scatter-Loading button and in the firmware folder, select the MTXXXX_Android_scatter_emmc.txt file (in MTXXXX LITERA X, replace the numbers corresponding to the processor of your device - the scatter file for each of them your own).

ATTENTION! For machines based on MT6575 and MT6577 processors, remove the checkboxes from the Preloader and DSP_BL items for all other devices with mEDIATEK chipsets Remove the checkbox only from the Preloader item;

10. Click the download button;

11. Disabled smartphone or tablet Connect to a computer via a USB cable. As soon as the new device is detected, its firmware should begin. If this did not happen, disconnect the machine from the PC, remove and insert it back its battery and connect to the computer again. In the process of firmware, subject to the correctly installed drivers, MTK USB Port must be observed in the device manager (MediaTek Preloader USB VCOM Port). If an error occurs, the gadget will stop displaying. Upon completion of the firmware, it also disappears from the device manager.

Firmware safely completed? It remains only to disconnect the Android device from the computer and turn it on. Type of Discaled File: Program
Supported OS: Android 2.2.3+
Installer Type: EXE
Developer: MediaTek
Official site: link
Release took place: May 20, 2015

Interface language: Russian
Publication Type: FREE
ROOT RIGHTS: NOT REQUIRED

Description:
SP Flash Tool - represents a utility for "firmware" android devices on the MTK platform. In this topic, I will try to understand clearly about the possibilities of the program, as well as disassemble and systematize errors that occur when working with this program. Also here will be topical versions of drivers. It is planned to replenish information on issues and errors, as well as their decision on personal experience users. If you met a mistake, the descriptions of which are not here and you know / do not know how to solve it, then this topic is for you. I also warn that this topic concerns only SP Flash Tool, errors and problems flashTool programs (This is another program), as well as other programs here will not be discussed.

Distribution list:

Sp_flash_tool_exe_windows_v5.1516.00
Minimum version of the firmware
Special version of the firmware with the support of Secure Boot
The most stable version of the firmware

Current version of the program for manual selection of camera drivers and display: Folder sp_mdt_exe_v3.1304.00_a2013.02.26_customer.zip (4.25 MB)

Current drivers: DRIVERS folder. (8.65 MB)

Universal driver: universaladbdriversetup6.msi (8.78 MB)

Only an ADB driver (manual drivers is performed only in this package): MTK_Android_USB_DRIVER folder. (8.26 MB)

A huge package of a variety of drivers for MTK devices: MTKUSBallV0.6 folder. (22.47 MB)

Another MTK driver package (with the driver of the driver for firmware through bat file.): Folder MTK_DRIVERS. (821.41 KB)

ADB Driver Auto Installation Package: adbdriverinstaller.exe

Program for displaying and removing USB drivers Installed on the computer
Folder: USBDEView.v2.30.x32. (78.23 KB)
Folder: USBDEView.v2.30.x64. (96.29 kb)

Additional Information:

Important information Read all without exception!

It is not a secret that in different parts of China phons sometimes change hardware components that cannot work correctly with firmware for similar devices from the previous party, of course, you do not get a non-working phone, but here softwareThe manufacturer provided by the manufacturer retailers often turns out to be not the "most fresh" and after the firmware of new devices of the version for the old revisions of the device, the user risks to get partially non-working telephone. To avoid this, it is extremely strictly recommended before flashing the device to make a full rom-backup phone!
Connects phones on the MT6575 and MT6577 processor: sew Preloader and DSP_BL only in the case of brick lifting! In all other standard updates and flashing, do not put these ticks in SP Flash Tool and do not turn on formatting!, Because You can like problems with which at home or can not cope or it will be difficult to do. The thoughtless firmware of these sections is absolutely useless and very risky lesson, especially on the platforms MT6575 and MT6577.
Requests the other phones on the MTK database when flashing devices via SP_FLASH_TOOL Do not go the Preloader file without much need.
SP_FLASH_TOOL program logs are stored along the way: C: \\ ProgramData \\ SP_FT_LOGS \\ "Folder with date" \\ sp_flash_tool.log

Installation Description:

1. First download the version you need the Sp Flash Tool.
2. To install the application, open the folder and find the file in it: Flash_Tool
3. Next, run the program and start sewing.

Video review:

Video instructions

Start Put the video for installing drivers for firmware, ADB, MTP in Windows 7 \\ 8 \\ 8.1

What is important to do before the firmware (do Full Rom Bacup) and (backup nvram)

Android firmware from computer SP Flas Tool Ohm (with battery, without battery, with Unreamed battery I. chinese copy phones)

Rollback to the Full ROM factory firmware via the Write Memory tab (telephone with a cigarette cam and unshemored)

Modpecavery Firmware (CWM) using SP Flash Tool (or how to flash one or more blocks)

An example of restoring a loss unit Preloader (bypasses the error SP Flash Tool (4032) in conventional method And through the test point and lifting the brick by closing the 4th and 5th contacts on the micro USB phone input)

An example of the phone firmware SP Flash Tool on remote computer Using Skype and TeamViewer

An example of the revitalization of the "brick" program SP Flash Tool after unsuccessful memory redemption

S_CHKSUM_ERROR (1041) Error when firmware Lenovo (decision not software, this brow helped only a drop-in flash memory chip)