Tip 1: How to Disable PIN Code

Instruction

To begin with, visit the menu of your mobile phone, find "Parameters" or "Settings" of the phone. The name is determined depending on the model of the mobile device.

Open this folder and find links such as "Phone and SIM card" or "PIN". In order to PIN, select the Turn off PIN link, but to perform this feature it will be necessary to enter your PIN, which belongs to this SIM card. After entering the code, the phone will complete the operation and the PIN code will no longer be requested by your mobile device when the device is turned on.

To make it more clear how to disable the PIN code in your mobile device, we will examine 2 specific examples. Take the phone of the Nokia model with the touch screen, as well as the phone model Sumsung without such a screen.

So, Nokia phone. Come in the menu, select the "Parameters" folder, after which the new window opens, where you select the "Phone" folder, then "Telephone Management", "Protection" and ultimately go to the "Phone and SIM card" folder. Here you find a "PIN code request", click on this window, select Disable and on the request of the phone, enter the PIN, which belongs to this SIM card. After the PIN operation you did turned off.

The second option is on the example of the phone of the model Sumsung. Come in the Mobile Phone menu, select the "Settings" folder, then "Security, then" PIN Check ", click on the" Disable "window, after which it will be necessary to enter PIN. Upon completion of this operation, it turns off.

note

If you enter an incorrect PIN code several times, your SIM card is blocked. In this case, you will have to refer to the mobile operator that serves you.

Helpful advice

Before entering the PIN code, make sure that you have not forgotten it, otherwise it can lead to blocking your SIM card

Many of us use protective phone codes - mainly in order to limit confidential information from both third parties and simply from random witnesses. It happens that it is quite by chance that we suddenly forget the protective code, and for reasons of security we have not been recorded anywhere. In order to restore or knock down the protective phone code, you can use certain methods.

Instruction

In case the information that is hidden for is not particularly valuable for you personally and easily restored, reflash. To do this, you first synchronize it with a computer using the date cable and drivers that must be included with the phone. In the event that an incomplete phone set, or you simply do not have this, buy a date cable, and download the drivers from the network.

In order to reflash the phone, use special software and the factory firmware version. All of this you can easily find on the Internet. Before flashing, be sure to save the source version of the firmware - in case something goes wrong with the new firmware version.

To disable the mobile high-speed pin-code, open the component called "network connection" by clicking on the network icon of notifications located in the notification area. Right-click on this icon and in the menu that opens, select "Properties" and the Safety tab. After that, click on the "Disconnect PIN" button, enter it and press the "OK" button - the PIN code will turn off.

If in attempts to disable PIN code you enter it incorrectly several times, the connection will be blocked and you will have to take the unlock key from the operator. If at the moment the PIN code is disabled or its use is not supported by the device, the "Disable PIN" button will be inactive and inaccessible.

To change the existing High Speed \u200b\u200bConnection PIN, open the same "Connection to the Network" component by clicking on the network icon in the notification area. Right-click the Menu, select "Properties" and the Safety tab. Click the "Change PIN" button, then enter the current code first, and then new. Once again, enter a new PIN code - it is necessary to check. Click OK.

If the device does not support the use of a PIN code, the tab called "Security" will be unavailable for you. If the code is disabled, the "Change PIN" button will also be inaccessible. To change it, you first need to turn it on.

Video on the topic

If your phone does not accept the keyboard blocking code known to you and refuses to translate the phone into normal mode, then someone has fun and changed the code. If the phone has a BB5 platform, it is not easy to remove the blocking code. You will need a phone connection cable to a computer, computer itself and NSS program.

You will need

• NSS program.

Instruction

Load the NSS program to the hard drive of the computer. You can find this application on Nokia phone service sites or on one of the software portals, for example, Softodrom.ru. Connect the phone to the computer using a special cable. Connection is carried out first, and only then to the personal computer. Install the NSS program, in the process, notice the Virtual USB Device item.

Run the program and click the SCAN for New Device button as a small magnifying glass located in the upper right corner of the program window. The program window will change, wait until READY flashes in the status panel (Lower line of the program window). Press the Phone Info button to scan the device. Wait for READY inscriptions and click the Scan button on the right. In the program window, information about your phone version and its IMEI will appear. Press the Permanent Memory button in the lower right corner.

Enter the number 0 in the Start field, and in the End - 512 field, check the to file checkbox. Then click Read so that the program shape the phone settings file. Find this file along the path specified in the end of the information dedicated. This file can be opened by a simple "notepad". In a string starting symbols 5 \u003d and the unlock code will be specified after each number 3. Remove every odd digit 3, and you will receive the desired code. Enter this code to the phone. After unlocking the phone, go to the settings and change the code to the usual one, or remove at all.

Video on the topic

note

This manual and NSS program are suitable for all phones on the BB5 platform.

Some USB flash drive owners face such a problem when copying data from a computer to media occurs error message. The reasons for the appearance of this problem may be several.

You will need

• - Flash drive;
• - a computer.

Instruction

Remember how you removed the USB port flash drive last time? If you did not use the "Safe Removing Device" functionality - a file system fails.

Keep in mind, physical damage affects the performance of the device. Carefully consider the flash drive - is there scratches on it, traces from impact? Some devices are equipped with recording protection. If the side found a small lever, try to move it.

If the error appeared in view of the file system failure, use the programs "HPUSB DISK" or "Jetflesh Recovery Tool". Pay attention to the standard Windows tools. Open "My Computer", click the flash drive icon with the right mouse button, then in the window that appears with the context menu, select the "Properties".

You will see five tabs: "General", "Autostask", "Equipment", "Access". In the General tab, try to rename the device in the Automotive Tab. Click the "Restore default" line. Next tab - "Service", perform disk defragmentation, or check the device for errors.

Pay attention to the "Equipment" tab - click the Properties button, diagnose the device, or optimize to improve work.

The "Access" tab allows you to open sharing for your device - useful if there is a local network configured between multiple computers.

Try all actions alternately - the error must eliminate. Keep in mind if the flash drive was damaged - it will have to throw it out.

Consider if the password is installed using special utilities, it is impossible to remove it without knowledge of the password itself. You will not be able to use the flash drive even if you try to format the device.

Video on the topic

Helpful advice

To protect the USB flash drive using a special program, install the desired software on your computer, pay attention to the USB Flash Securiti utility. Connect the disk to the computer and set the password on it. Before encryption, the program deletes all data from the media - save the information in advance. Password installation will take some time, the flash drive will change the name.

Sources:

• We protect the USB password with USB Flash Security

You will need

• - access to the Internet.

Instruction

Select the unlocking means of the flash card of your phone, respectively, the way you installed the password on it. Please note that if it was created by a third-party program, then you can get access to the files on the map may be impossible. If the program has previously been removed from your phone, re-download it, after making sure that you use the same version of the application.

If you installed a password for access to the flash card of the phone using the standard Mobile Device Menu, unlock the removable drive in the same menu of your mobile device. If you do not remember the password, try to choose the most likely combination or contact your city service centers.

If protection is installed on the files of your removable drive, remove it by moving the blocking switch to the Unlock. Please note that such a type of blocking is sometimes possible without your participation, just the next time be careful when working with a memory card.

If you have not been installed any lock on the memory card, but access to it is limited, check it with the program of antiviruses, it is best to perform it using a computer. If you check the files also fail, most likely, you will have to format the memory module. In this case, copying may not be available.

Turn on your computer and download the operating system in safe mode, then connect the removable USB port drive. Through the "Administration" or "My Computer" menu, perform full formatting of the card. Please note that this operation may take about half an hour and even more depending on the tank of the flash card. After that, insert it into your mobile device and re-format from its menu.

Video on the topic

Helpful advice

Do not block access to the memory card by third-party programs.

Set protection to USB Flash can its owner to prevent unauthorized data access. Sometimes the password occurs as an error. If such a problem appeared, it is difficult to remove it without loss of data. Methods for solving this task are different, and they can be used depending on the specific case.

You will need

• - a computer;
• - flash drive.

Instruction

File system failure on a flash drive can occur due to improper completion of the device. So that such a problem does not appear, use the "Safe Extraction" functionality.

Some drives are supplied with special protection. Carefully consider the USB flash drive: you can find a small lever from the side. If you yourself, or someone else inadvertently shifted it, USB protection Flash is activated. When connecting to a computer, a message will occur that data stored on the removable disk is protected from recording. You will not be able to copy files or write new ones. Move this lever in the opposite side, and try connecting the device to the computer again. The flash drive must earn in the usual mode.

If this lever does not find it - try rename USB Flash. Insert the USB flash drive in the USB port. Then click on the "My Computer" icon on the desktop. Click on it right mouse button, then the removable disk icon, select the "Properties" string. You will see several tabs: "Autostask", "General", "Access", "Equipment". USB Flash can be renamed in the General tab.

After changing the name, remove the flash drive from the computer, not forgetting about the safe functionality, and insert again. If the error remains, try restoring the defaults by clicking the corresponding line in the Auto Suppet tab.

Check for errors using disk defragmentation. The data on the carrier will not affect the data. Go to the "Service" menu and click Disk Defragmentation. Tab "Equipment" and "Properties" menu allow you to diagnose a removable disk or optimize it to improve performance.