Transponder NTV for 36 degrees. Satellite technologies

To date, NTV Plus is a leader in the field satellite broadcasting. This network has a huge number of channels that show programs with different content. Any viewer will be able to find something interesting to his taste, because NTV packets are considered the best if we are talking about family watching.

In 2017, the company operates on several satellites, as in principle it was in 2016. This allows you to provide a stable, high-quality signal in all regions of the country. Spectators rated the effort to improve the signal and often stop their choice on NTV, preferring cheap, but let's say straight, not too high-quality products, a proven and reliable provider. Telepastes from NTV plus are designed for different audiences, but their cost is always adequate. It remains only to configure the frequencies that the provider works to enjoy high-quality television.

What equipment will need

To view the channels passed in normal mode, and their quality did not suffer, users are recommended to use special equipment. With its help and the frequency on which satellites are working, is being configured much easier, and the picture in the HD format is accepted without problems. Here, by the way, and a small list of what the user must have to configure frequencies and view favorite TV channels:

• Teleantenna (plate);
• Convector LNB and HD Receiver;
• High-quality TV, with a plasma screen. LED panel, LSD panel, in general, any device supporting HD format;
• Quality audio system.

As a rule, this is enough, but sometimes you can use additional equipment. The main thing is that the antenna is strong and was able to withstand various interference, which sometimes affect the signal stability. Here is a small list of interference that can negatively affect the quality shown on the TV image:

• In the first case, much depends on weather conditions. Sometimes heavy snowfall, especially if the snow sticks on a plate, can essentially prevent the reception of the signal. In this case, even the correctly configured frequency does not help;
• High trees that brave the path to the signal from the satellite. Nearby and around the perimeter there should be no trees at least 20 meters. In addition, opposite the antenna should not be buildings that overlap the broadcasting of the satellite. The signal may not only be blocked, but to pass, but with such interference that there will be no sense in the presence of equipment;
• If the user himself was engaged in installing an antenna, which takes the frequency of NTV plus. Of course, no one forbates the buyer to carry out the procedure for installing and configuring equipment. But an inexperienced user can intimidate something, accidentally break, or connect incorrectly. Naturally, after that no one can adjust the frequencies so that the channels start working.

Transponders NTV Plus

The company has a pair of major transponders who work in all regions of the country. For example, in the East, West and South, thanks to a high-quality satellite signal, users can easily receive high-quality television at an affordable price. Only two major transponders operate in Russia.

• Transponder NTV plus;
• Transponder NTV plus HD.

In turn, the instruments under consideration can be divided into several categories that differ depending on the polarization, frequency and speed of the signal. You can distinguish transponders with right and left polarization.

1. Among transponders with left-circular polarization can be allocated:

1. Among transponders with the right circular polarization can be allocated:

• Channels owned by Holding Match, TNT, our football, star, federal NTV, RBC. In addition, there is an information channel NTV plus. They act at a frequency of 11785 R;
• Products NTV Plus, whose broadcast frequency - 11900 R. In particular, companies include such popular information channels as Euronews, and among entertainment, TV 1000 can be distinguished;
• At a frequency of 12245 R, not only satellite television, but also radio stations are broadcast. It is convenient because there is no longer another transponder working with radio stations. Because if the user wants to get a high quality radio signal, then only this frequency should be selected;
• At the frequency of 12437 R, channels are broadcast such as: Live, RTR Planet, Russian Bestseller, Sarafan, Country, Arkhyz 24, Russian Roman;
• Frequency 12322 R regulates the operation of such channels as: auto plus, filmlub, TV India, TV kitchen, la-minor TV, male cinema, our cinema, KVN TV, NTV-Plus Sport.

But as for other criteria, they are the same: modulation DVB-S2, MPEG-4 standard 8PSK, encoding - Viaccess, flow rate 27500 SR, FEC 3/4. Just let's look at what they mean:

• SR is the flow rate, more precisely, the density of the information flow present in the satellite signal;
• FEC (Forvard Error Connection) - Using this designation, you can enable error correction or restore the initial package data;
• Viaccess - helps access the list of paid channels. In order for the system to earn, you need to use the current version 5.0 or 6.0. Others are not suitable, as they cause a lot of failures in the system, and this will adversely affect your impression from viewing your favorite TV programs.

What satellites and television packages use to broadcast NTV

For a Russian-speaking user, a complete expanse, since many satellite television operators appeared, which offer not only high-quality, but also accessible content. One of the most popular operators, no doubt, is NTV Plus. The number of channels is caused by a considerable number of satellites. Here is some of them:

• EutelSat 36A / 36B (W4 / W7). This is the first satellite, which began to be used to broadcast NTV channels. It is located at 36 ° E East longitude and discard the signal to the West of Russia and part of Ukraine. It is not surprising that after connecting such a powerful device, the user's audience expanded significantly.
• Through a couple of years, the satellite of Bonum-1 joined the list of satellites, although at the moment he was renamed express-AT1. It is also called NTV plus east, as the broadcast of this satellite is conducted at the Far East, Siberia and other parts of Russia, which are in the eastern region;

Also users will delight the fact that most Russian-speaking channels. But there is an opportunity to adjust television in other languages. Almost all TV channels work in the Viaccess 2.5 encoding, but if you install a satellite antenna, at least 0.6 m, it is necessary to turn on the DRE 5000 receiver, which this signal decodes.
At the moment, NTV Plus offers people various channels that are part of thematic packets. Here are some of them and their cost:

• Basic package - 550 rubles.
• Extended basic package - 750 rubles
• Basic advanced + sport + cinema + night - 1050 rubles.
• Basic + VIP-cinema - 1050 rubles.
• Basic + Cinema + Night + Superport - 1550 rubles.
• Bases. races + night + VIP-movies + superport - 1850 rubles.

As you can see, the prices are quite affordable, and thanks to the satellites every user, even the one who lives in a remote village where with mobile communications Problems can see your favorite movie. NTV plus everywhere will work in the same quality as in Moscow. So lovers of sports, cognitive channels, cinema and children's channels will provide high-quality and pleasant content.

Manual setting of NTV channels plus

In order to manually find a specific channel, you need to know which frequency is used for broadcasting. In order to determine this, you will need a special table where all the most important parameters that need to be entered in the receiver search menu are indicated. Here actually she:

Transponder	Frequency, MHC	Polarization	Encoding	Flood velocity	FeC.
NTV Plus	11862	R.	DRE CRYPT.	27500	3/4
Bollywood HD, CCTV 4, CCTV Rus, CGTN RUS, FOX TV, Mezzo, Paramount Comedy, Pets, Carousel, Hunting and Fishing, Psychology 21
NTV Plus	11900	R.	DRE CRYPT.	27500	3/4
Armenia TV Satellite, Da Vinci Learning, Euronews, Food Network, Ocean TV
NTV Plus	12130	R.	DRE CRYPT.	27500	3/4
1HD, Mezzo Live HD, MGM HD, Nat Geo Wild HD, Russian Travel Guide TV, First HD, Russia 1
NTV Plus	12207	R.	DRE CRYPT.	27500	3/4
Amedia Premium HD, Bollywood HD, Eurosport HD, National Geographic Channel, The History Channel HD, TLC, Travel Channel HD
NTV Plus	12245	R.	DRE CRYPT.	27500	3/4
8 Channel, Azad TV, Bloomberg TV, DFM, EUROSPORT, FRANCE 24
NTV Plus	12265	L.	DRE CRYPT.	27500	3/4
9 TV, Russia Today, Shop 24, Shopping Live, Russia K, saved
NTV Plus	12322	R.	DRE CRYPT.	27500	3/4
365 days TV, Film Schittle, Comedy TV, Who is who, Kitchen TV, Male Cinema, Nostalgia, Nude Art TV, Premiere, Egoist TV
NTV Plus	12341	L.	DRE CRYPT.	27500	3/4
Discovery Science, ZooPark, Children's TV Channel, Cinema TV, Comedy TV, Channel One, STS, TDK, TNV Planet, TNT Comedy
NTV Plus	12399	R.	DRE CRYPT.	27500	3/4
Discovery Channel Russia, HD Life, HD Cinema, Tlum HD
NTV Plus	12437	R.	DRE CRYPT.	27500	3/4
Detektiv.tv, Fashion TV, Fine Living Network, Food Network

But before you do the settings of the channels, where the frequency table described above is used, the user will have to reset the specified settings. To do this, enter the menu, then select the "Settings" section. After that, go to "Installation by default", select "Channels", as well as "Antenna" by selecting in this section "Satellite Setup". The following procedure will follow:

• You need to enter a password that consists of four zeros;
• Remove all ticks, except those that stand on satellites responsible for broadcasting NTV plus in your region, that is, EutelSatw4 or express AT1. To do this procedure, you can take out and back insert the access card;
• Specify the transponder using those data as specified in the frequency table. But here common parameters Settings, if you expect you to search in semi-automatic order: 12130 R and LNB levels (lower \u003d 0; upper \u003d 10750);
• Chose the transponder and made sure proper setting - You can move to more decisive steps. Set the "Search Online" command. Perhaps you have to wait, but as soon as the procedure is over, you will show those channels whose parameters were made and for the work of which you paid to the satellite operator.

In addition, it is important to understand that the list of channels constantly add innovations, therefore the parameters that are listed in the table will change. Users are advised to follow the relevance of information. The table above was updated at the end of May 2017, because the information specified in it at the moment can be safely used.

Note.

1. Based on your location, select the desired diameter satellite antennaDepending on where you live the diameter of the antenna may vary from 0.6 to 0.9 meters. For the Nizhny Novgorod and the region there is enough plates with a radius of 60 cm to watch NTV Plus.

Detailed map of the satellite coating Eutelsat W4-Eutelsat Sesat is here:

2. Set the antenna to the Eutelsat W4-Eutelsat Sesat satellite.

Note:
1. Satellite antenna must necessarily stand in a satellite direction.
Approximate direction on Satellite "Eutelsat W4-Eutelsat Sesat"
In the central region to watch NTV Plus- to the southwest.
2. There should be no obstacles between the antenna and the estimated position of the satellite. Within a radius of 20 meters, it is unwindy to be trees, houses and other objects.
An example of typical obstacle options

3. The plate should be placed only in the open space. If you are planning to watch NTV plus inside the balcony or attic, then install the mirror plates can not be installed.
First you need to decide in what direction you need to send the mirror of the plates. To do this, we will need 3 parameters: the azimuth value for our locality without taking into account magnetic decline, (because on the maps a magnetic decline is taken into account), the value of the angle of place is taken into account, the angle of rotation of the converter.

For Nizhny Novgorod and areas of these values \u200b\u200bwill be:
- Azimuth 190 ° values
- Corner values \u200b\u200bof 26 °
- the angle of rotation of the converter is approximately 5 °, 30 \\

In order not to lose the destination destination, it is worth identifying for yourself a landmark, determine which we offer you two options:

MANUFACTURE

1. We go out and take a compass with you.
2. Become back to the building on the southwest side of the object, where planning the installation.
3. Determine the direction on the compass to the North (i.e., when the compass red arrow indicates 0 ° on the dial).
4. Delay the azimuth values \u200b\u200bfor Nizhny Novgorod and region is approximately 190 °.
5. Spectacularly choose and remember the landmark, for example, a building or tree (the resulting direction and will be the direction to the EutelSat W4-Eutelsat Sesat satellite).

Definition of landmark

1. To determine the exact direction to the satellite, we take a map of the settlement (printed for example, from search engines Internet)
2. We note the object where the antenna is planned.
3. Determine the direction on the map to the north.
4. We put the transport card in such a way that the zero is directed to the north. We celebrate 190 ° on the map - this will be the direction to the Eutelsat W4-Eutelsat Sesat satellite.
5. In the resulting direction on the Eutelsat W4-Eutelsat Sesat satellite, we celebrate a landmark.

Collection of plates for "NTV-Plus" with a diameter of 60 cm

We choose the place on the building for mounting the antenna holder with visibility to the landmark.

For installation take with you:
- perforator or drill for drilling holes in the place of attachment of the antenna bracket;
- anchor bolts, screws or through studs to fix the antenna bracket on the wall;
- tape and a sharp knife for cutting the cable;
- spanners (from 10mm to 22mm) or adjustable key;
- pencil or feltaster in order to make labels on the antenna mount

Bracket can be fastened with anchor bolts, screws or through studs to ensure the greatest strength with possible storm and wind loads. The pipe of the pipe on which the antenna is attached, should be strictly vertical.

We collect a satellite antenna, in accordance with the attached scheme, to view the NTV plus

The converter is installed in the holder on the out-of-the-heading antenna to the antenna mirror, securely fix taking into account the desired angle of rotation clockwise for the Nizhny Novgorod an angle is 5 ° 30 \\. For the convenience of adjusting the inclination of the converter, on its housing, as a rule, a scale with zero marker and labels after 5 * are applied.
Wear an antenna to the bracket. Tighten the adjusting nuts so that it is possible to move the antenna in a vertical and horizontal direction with some effort alternately.

Take up the cutting of the cable, remove the outer insulation by 15 mm from the edge. Do not damaging the central core, remove a 10mm dielectric with foil. Becoming the remaining shielding cable foil. Screw the F-connector to the cable until the central core appears.

Connect the cable to the convepor, connect the second end of the cable to the satellite receiver.
Connecting the cable to the receiver is made strictly with a 220 volt receiver off from the network.

ATTENTION!
If an antenna is the highest point on the building, then it can be in a high probability of lightning, so you need to worry about grounding and lightning. Lightning in the antenna can lead to the exit of the entire complex of equipment or injury. When installing antennas on balconies, loggias, walls of buildings already having grounding, additional grounding is not required. If the antenna is installed on the elevations, cottages, cottages and dachas are absent, it is necessary to contact the construction organization for the device of the corresponding lightning.

Connecting to TV and configuration of the receiver

Turn on the TV and set it to the video reception mode from the video input to which the receiver is connected to watch NTV plus.
Turn on the receiver. After turning on the receiver, the receiver initialization process is displayed on the TV screen. If the receiver was not configured earlier, the main menu appears on the screen after the initialization.
Insert the smart card in the receiver slot, according to the direction of the arrow depicted next to the card receiver
Make sure that the EutelSat W4-Eutelsat Sesat satellite is in your receiver satellite list, if not, enter data manually.

Required data for configuration:
If you connect the receiver for the first time, the "Install language" section appears on the TV screen - click "Next". The "Setting up AV output" section will appear; If necessary, change the settings if not: click "Next".

First, remove all the channels:
MENU-INTERFORME- ORGANIZATION Channels - Organization Network- Delete all networks.

Search channels:
Menu - Setup-Search Channels - Antenna Setup (PIN Default 0000)
- Eutelsat W4
- frequency of heterodyne 10750- ok
- Transponder frequency -12322
- Polarization Auto- SR \u003d 27500
- FEC \u003d 3/4
- Sweet search

To date, this satellite network It has a large number of channels of a wide variety of genres that you like. NTV Plus has satellites broadcasting from a variety of places of our planet and at the respective frequencies in 2017.

To watch channels this operator in high quality And with all the amenities, the following equipment is necessary:

1. Teleantenna and HD receiver, together with convector.
2. Plasma panel or LED panel, in another case, the LSD panel supporting HD format.
3. Audio system, providing stereo.

Additional equipment may also be needed, since for complex systems there may be insufficiently listed equipment, but this is most often necessary, since customers usually choose a standard set of equipment.

Signal stability in 2017 will depend on a wide variety of factors, including weather conditions, the presence of high-rise buildings, trees, wires, which leads to a distortion of the signal, or to block it at all, so work on the installation of satellite antenna and other network components, including cable gaskets, trust professionals in this case, or experienced masters this kind Technicians, because a simple person is almost impossible without special training to configure independently all the equipment you need.

The main transponders are two, they have the name of NTV plus and NTV plus HD. These devices are divided into transponders with right and left polarization, as well as depend on the frequency and flow rate, since they are also important parameters for steadily stable operation of the device and ensure the desired frequencies NTV plus 2017.

Transponders with left-circular polarization

Among transponders for satellite channels of the NTV network, it is worth highlighting the following, which have a frequency in MHz and polarization by type of left circular:

1. NTV plus with a frequency of 12265 L. It is on it that there is a standard channel package, which includes the channel Russia 1, 5 channel, peace, Friday, Ren channel, Russia 24. Most of these channels are included in the first multiplex with MPEG-2 DVB modulation format -S and QPSK standard.
2. NTV plus frequency 12341 L. Here are collected channels such as the first. STS, NTV world, home, Channels belonging to TNT. There are the same parameters as 12265 L: Viacces encoding, flow rate with a value of 27500 SR, FEC is 3/4.

Deciphering values:

• SR - flow rate, which shows the density of the information flow in the satellite signal;
• FEC (Forvard Error Connection) - allows you to correct errors using the probe, based on this method, initial payment information can be restored;
• Viaccess - allows access to the system of paid TV channels, is currently relevant version 5.0 and 6.0, since the other versions are either hacked or under threat of this event.

Transponders with right circular polarization.

The remaining transponders have right circular polarization, among them the following should be highlighted:

1. NTV plus the frequency of 11785 R is standing out that here the channels holding a match!, Federal NTVs and Star, TNT, RBC, Yu, our football, as well as the information channel of this satellite operator. Although it is not the most extensive on the list of channels, but the channels are collected here, including from the first and second multiplexes.
2. NTV plus the frequency of 11900 R. The composition has several information channels, such as Euronews, the provincial channel, the TV 1000 and Viasat division. This transponder in 2017 is suitable for those who want to learn news with different points Vision and those who want to see a favorite movie.
3. NTV plus frequency 12245 R. In this case, in addition to television, it also includes radio stations, including such as Echo of Moscow, maximum, autoradio, Russian radio, Chanson, Vanya radio station, Komsomolskaya Pravda. This option Suitable for those who want not only to watch, but also listen. It should also be noted that radio stations are located only on this transponder for satellite television.
4. NTV plus frequency12437 R. This option provides channels such as sundress, live, country, RTR Planet, Arkhyz 24, Russian Roman, Russian Bestseller.
5. NTV plus frequency12322 R. This option has the following set of channels: auto plus, filmlub, TV India, TV kitchen, la-minor TV, male movies, a lot of TV, canal our cinema, KVN TV, NTV-Plus Sport, Nostalgia channel.

All devices listed above have the same data on the following criteria: modulationDVB.- S.2, StandardMPEG-4 8 PSK., type encodingViaccess., flow rate of 27500Sr., FeC. It is 3/4.

An important factor is that the Viaccess encoding has version version 4.0, Viaccess version 5.0, Viaccess version 6.0, differing from each other with improved signal encoding compared to previous versions.

NTV transponders plus 2017 for HD channels

For those who wish to watch high quality television, there are special devices, so it is:

1. NTV plus HD format 11823 R. This kit includes the following channels: our Soccer HD, MTV Live HD, Nickelodeon HD, Match! Football 1/2/3 HD.
2. NTV plus HD format 11930 R. This includes TV 1000 Comedy HD, Viasat Sport East HD, Fox Russia HD, Viasat Sport HD, Viasat Nature / History HD.
3. NTV plus HD format Frequency 12207 R. In its composition, Channels such as AMEDIA Premium HD, History Russia HD, Eurosport 1 HD, TLC RUSSIA HD.
4. NTV Plus HD format Frequency 12399 R. This includes the HD filmmaker, Discovery Channel Russia HD, KHL TV HD.

It should be noted that all of the above objects have a frequency of 11,800 to 12400 MHz, since the frequency data allow you to maintain a steady signal in high quality, without interrupting and does not degrade the coverage area. Polarization for these objects is the right circular, because thanks to it there is a uniform and high-grade high definition signal, as well as the signal does not block the channels from the first and second multiplex.

In recent years, NTV Plus is trying to cover all new territories, one of the latter became the Far East, in 2017 this territory will have satellites for a full-fledged signal, since so far there are long-time work and study of the signal prevalence in the Far East.

Thanks to the previously listed data, you can easily navigate when settings of the channels in 2017. Satellite exposure zone depending on the territory hesitates from forty sixDBW. Up to fifty twoDBW.. The main satellite for this company in 2017 is satellite Eurotelesat. 36 A. andEurotelesat. 36 B.where there are frequencies in the region of 12,000 megahertz, the main view of the polarization is the right circular, as a last resort, the left circular.

Our campaign is engaged in installing NTV satellite television plus in Moscow and the Moscow region. We are the official authorized NTV dealer Plus. Channels NTV Plus Today it comes more than 250 channels In digital quality, and more than 30 channels in high definition HDTV. These include sports, film, informative, children's, educational, musical and other channels. Subscription fee in NTV Plus For the package "Economical" (69 channels) total 25 rubles per month. (for one receiver).

Order

Make an order by phone or on the site.

Coordination

We determine the technical possibility of installation, equipment composition and convenient installation time

Installation

We bring and install a set of equipment. Installation period 1-2 days from the date of application

PAYMENT

After the installation is completed, you accept and pay for equipment and work.

NTV plus with receivers on 1 TV

The equipment package plus includes:

• Satellite Receiver NTV-Plus 1 HD VA, Antenna Diameter 0.6 m
• Subscriber contract
• Standard mounting

With installation (Standard installation) - 9000 rubles.

You can place an order for the purchase and installation of a set of satellite television "NTV Plus" on our website or by phone. Checkout.

NTV Plus C. Access Module

The equipment kit NTV plus includes:

• Access Module, Antenna Diameter 0.6 m
• Subscriber contract
• Standard mounting

This set is only suitable for TVs having:

1. Built-in satellite receiver DVB-S2
   
2. Slot under the Ci standard module (Common Interface)

The cost of the NTV package plus With installation (Standard installation) - 8500 rubles. Configure NTV satellite antenna plus in Moscow and region

Setting up the NTV satellite antenna plus is carried out according to the following parameters:

• Azimuta
• The corner of the place

Antenna is configured to the device

Instruction

Install the satellite antenna in a place where it will not cover its objects. These include high trees with an empty crown and nearby buildings. Since NTV + or Eutelsat W4 satellite is located strictly in the south, everything in the sun. At 13.00 Moscow time it is just in this direction. In addition, the location angle or an antenna angle should be needed. For example, in the southern part of Russia, it will be directed up at about 45 degrees, in Moscow will stand almost vertically, in St. Petersburg - to watch "to the ground." This is due to the curvature of the offset mirror.

Install the converter with a circular polarization to the satellite antenna, better than the plug down so that the moisture does not fall. Connect the coax cable from the converter to, and from it to. Turn on the tuner. Find the receiver channel on the TV. Use the buttons on the tuner's console to configure the NTV + menu by parameters 11900 R 27500. When 0% of the signal quality and 0% of power will be installed in the channel window, start turning the left-to-right antenna. After passing the sector, lift or lower the plate on one degree and scan the horizon again. If there is no NTV + satellite in the tuner settings, set the EUTELSAT W4 satellite in the menu (10750 frequency), turn on the power supply of the converter, input the Diseqc, turn off and try again to find the channels on the NTV + transponder.

Secure the antenna after the sustainable signal appears. It will be seen by changing the percentage values \u200b\u200bof the strength and signal power in the channel window. In the same way, adjust the satellite antenna on the FTA (open) NTV channel on the ABS 1 75E satellite. It is located on the transponder 12640V22000. This requires a linear KU-band converter, these technical data are written on its body. The ABS 1 75E satellite is located on the left side of the Eutelsat W4 satellite.

Sources:

• nTV satellite settings

How could people manage to do without a plate? There is now a TV in every home, and a person boasts a wide selection of channels. Let even all 64 channels can not be viewed at one time, but the main thing is that he has this very plate. Connect the plate at home can every avid TV viewer.

You will need

• Set of tools, plate, cable, DVB card, receiver.

Instruction

Connect the disk converter to the DVB card using the cable, and first install the connectors on it.

Pay attention to the receiver when you will rotate the antenna to search for a signal.

Now that the signal becomes more and more clear, select the final location of the antenna and secure it with bolts and nuts.

note

Try to consolidate the plate stronger, so that when the winds or strong frosts do not happen to the displacement.

Helpful advice

You can configure a plate using data shown not by the receiver, but a DVB-card tuner program.

Sources:

• Detailed description Action for connecting a plate.

Satellite television I. satellite Internet Not in our time something exotic. Any place where there is a satellite coverage area, you can watch television channels in digital quality. In addition, if you have a computer and a DVB card, then configuring the Internet provider, you can always connect to the network by asynchronous or double-sided channel. However, the main thing is to properly configure the satellite antenna to receive the signal. There are several options to do this, one of them - on the compass.

Instruction

Install the satellite antenna in a place where high-altitude buildings or high trees do not close it, otherwise the TV picture will "crumble" or at all will not be able to catch a signal from the satellite transponder. The bracket and the pillar on which it will be fixed must be fixed strictly horizontally or vertically, respectively.

Determine the geographic coordinates of your place. To do this on the site www.maps.google.com. In the search bar, enter your city, coordinates (Eastern Longitude, V.D., and North Latina, S.Sh.). A red marker will appear on the map, click on it with the right mouse button and select the "What is it here?". Coordinates will appear in the "Search" string. For example, Donetsk (Ukraine) has geographic coordinates: 48.028968 V.D., 37.802582 S.Sh.

Use the site www.dishpointer.com.where you also enter the name of the city or its coordinates. In the drop-down menu, select the satellite on which you decide to configure the antenna. After that, on satellite map Select your location in the city and click on it. The green beam will indicate the direction of rotation of the antenna, and at the bottom of the cards will be shown in degrees: elevation (plane mirror angle), Azimuth (True) (azimuth on the compass), LNB Skew (turn of the converter). For example: Donetsk (Ukraine) - setting up to the ABS 1 75E, elevation satellite: 24.3 degrees., Azimuth: 134.4 degrees., LNB Skew: -28.5 ° ("minus" means a turn to the right counterclockwise relatively perpendicular to the vector of vector).

Take the compass and turn the satellite plate according to this data. Install the mirror vertically. Release slightly fastening and start scanning the sector, moving the antenna to the right and left. When the signal appears, achieve it maximum value And fix it. Set the power of the signal to the converter and secure it. If the signal is not detected, lower or lift an antenna to one degree after each passage.

Sources:

• how to set up a satellite plate on the compass

Satellite television is an opportunity to watch hundreds of channels in many languages. To access the global digital television broadcast, you need to purchase the necessary equipment and configure it correctly.

Instruction

You will need an antenna that receives a signal from a satellite, a receiver, antenna mounting, converters, switch and cable. Learn in what satellites area is your home. This will help you website www.lyngsat.com. There you can also get accurate information about which channels depend on each of the satellites.

Place the antenna on the south side of the house and make sure that nothing lights up. Decide with its direction. The most elementary way - look at the neighbors antennas. If you have nothing to compare with, the direction can be determined by azimuth using special Program Satellite Antenna Alignment. Having learned the direction, securely install the antenna for the mount.

Connect the receiver and TV and proceed to setup. It is better to make it so that the receiver is near the antenna then you can immediately see the results of your work. Connect the converter to the receiver and display the signal level indicator from the satellite to the TV screen. Then we slightly loosen the mount on the antenna and start gently rotate the antenna to the left and right, follow the signal level. After determining the best position of the antenna, finally secure it. Be very neat, since the displacement of the antenna is just a couple of millimeters can lead to the fact that the search will have to begin again.

Configure the position of the converters. Usually the central converter takes the signal of the closest satellite, and the side - the rest. After completing the setting, attach the Diseqc switch and pave the cable.

Set the channels on the TV. You can run automatic mode, then hundreds of satellite channels from around the world will be at your disposal, and you can, with help manual setting, Choose only a few you need that you really are going to watch. On this installation satellite equipment Finished. Happy viewing.

Video on the topic

Satellite plate opens a number of opportunities. Set it yourself relatively simple. The main thing is to stock the right tools and patience.

Instruction

Decide with the place where you want to put a satellite plate. Here arises a number of difficulties. First, on the path of contact of the antenna with a satellite there should be no big obstacles: a tree, a high building, a massive metal structure, etc. All these objects may significantly worsen the reception of the signal, which will further complicate the setting of many channels.

Take the perforator. Without it, do not do if you want to install a satellite antenna in concrete overlap, wall, roof, balcony railing, etc .. Make holes enough diameter so that you can spin the medium-sized bolts, since the weight of the whole design requires massive mounts.

After the holes in accordance with the markup on the antenna mounting surface are ready, take the anchor bolts. They will achieve sufficient hardness of fastening the design of this weight. Screw them. Secure the antenna tripod on the anchor bolts.

In accordance with the assembly scheme, collect the remaining part of the design to establish a satellite plate. Provide a rigid fastening and the possibility of turning the plates itself to control the angle of inclination to achieve maximum definition of the signal.

Drill another hole. This time through. Through it, you will spend the cable from the satellite antenna to the receiving. When the cable is connected, select the Channel Search feature on the receiver. Set up maximum amount Channels for your region.

Find the position of the antenna in which the clarity of the signal will be maximum. Secure the plate in this position. Tightly tighten the fastening bolts so that the antenna does not have the ability to rotate under the influence of a strong wind or under its own severity.

If you need to reformat some video, the converter is just irreplaceable. Improve the quality, reduce the size, fit the player's capabilities. All this is a relatively easy to use program.

Instruction

Download the video converter from the Internet. The most popular are versions from Nero and Genius. They are quite easy to operate and possess very wide spectrum opportunities. Run the application installation program. Agree with the requirements license Agreement.

Select a directory. If you do not need advanced features, select "Standard Equipment". This means that some components of the program are not installed, since they do not have a special need. Wait until the installation is completed. Restart yours personal Computer.

Find the program icon on the desktop. If it was not installed there automatically, go to the directory you chose as the installation site. Click on the label twice to run, and then configure the converter. With this program, you can not only change the format, but also view the video.

On the toolbar, go to the View tab. Add an "Active Monitor" to the work field. It will be placed in the right upper corner Program window. During video conversion, you can now view it.

Install the format that you will most often use. At the bottom of the program window, find two lines. In one, the address of the folder is where the converted video will be saved to another - the format to which conversion will occur. Expand the list of available formats. It is ordered and clearly grouped.

Select the desired format, click on it with the left mouse button. After that you will see how it is a row, as used. As you need, you can always change it. Load multiple files to the video converter. It can be done through the folder open or just drag files In the program window. Run conversion. If the change in the current video format is not possible, select another, which also satisfy your requirements.

Video on the topic

The tuner is a special device that can decode the incoming signal and transmit it to the TV in its mindable. Mostly now distributed satellite receiverswhich are part of the equipment complex for satellite TV.

You will need

• - television;
• - satellite receiver.

Instruction

To ban comments, you will need to install RC Link Redirector plugin, which is usually used to transform external references in the internal path of redirect (redirects), or remove from source code Website satellite form to add links. If you still decided to allow the commenting of satellite articles, then for additional security, install on the site of spam plugins, such as Akismet or DCAPTCHA.

To configure the Satellite Sitelit on the WordPress engine, you can set the following additional plugins: - Simple Tags is used to create, edit and managing tags, by which you can also increase the number of page pages; - Rustolat converts incomprehensible characters that appear in the URLs to the records, Latin letters; - Dagon Design Sitemap Generator is used to create a site map; - Google XML Sitemaps creates an XML card site; - All in One SEO Pack optimizes satellite; - WordPress Database Backup is required for back-up databases and send them to mail.