Problem with Windows 7 computer performance. How to increase system performance by built-in Windows? Using productivity troubleshooting

It is unlikely that you can doubt that the best windows performance 7 has immediately after its installation. The system disk is a practically newborn, there is nothing superfluous in it, so the system "flies." Yes, windows manufacturers 7 tried to impress their future users, especially those who replace their previous system On Windows 7. At first everything goes perfectly. Seed starts, shows a decent speed than the user pleases, but then she begins to upset it with his "Tugodum."

Unfortunately, the developers of Windows 7, probably working on supere-speed PCs, have little thought about the multiple settings that are responsible for the speed of the system, based on the fact that the main mass of users will be a housewife with their laptops and tablets. And not every more educated user, especially if he has problems with English, is available that information on setting the system parameters to increase its speed, which is posted on the Microsoft website. The article attempts to tell users how to optimize Windows 7 is possible, to acquaint them with its admission to increase the speed of work operating system and computer as a whole. A complete list of functions and seven sections that allow setting and optimization are quite large. Let us dwell on the main ones.

Accelerating Windows 7 Downloads

It is unlikely that the user will like if the operating system loads have to wait a few minutes. Although the download of the computer with Windows 7 occurs previous versions OS, many users do not mind to speed it up with some admission.

Using multi-core

To include support multi-core processors During the download, you should enter the word msconfig in the search bar. Then you need to go along the way "Download" tab - "Advanced Parameters" - "Number of processors", Mark it, set a value equal to the number of cores in installed processor, and complete everything by pressing "OK".

Then you need to restart the computer and make sure that the operating speed of the OS is incremented.

Turning off applications from autoload

OS boot speed also depends on the number of applications that are loaded simultaneously with boot windows. The list can be seen on the same MSCONFIG command, but on the "Autoload" tab:

Often, this list includes (unnoticed for the user) applications whose downloads are not required at all, but they increase the download time. To optimize Windows, you should exclude such applications by removing the checkbox and pressing "OK". After that, you should reboot.

Acceleration of PC shutdown

You can also speed up the computer shutdown if you can reduce the value of the time interval valued to complete active programs. If at the same time they will not have time to end independently, then Windows will stop them forcibly. To reduce the power off time, you must edit the registry. Without going into the details of this process, it should be said that in the registry you need to find the WAITTOKIllServiceTimeout parameter and make it a value from 12,000 to 2000.

Accelerate the launch of applications from the Start menu

If the classic view of this menu is not used, then optimize it, that is, to increase the speed of its operation as follows:

Press the PCM on the taskbar or the Start button.
Of context menu Select subparagraph "Properties".
In the properties, open the tab "Start" menu.
On the Click "Configure" tab.
Delete the checkbox from the "Allow recently installed programs" item.

Acceleration graphics

In the case when the PC does not have a fairly powerful graphics adapter (it has a depletion or integrated video adapter), the Aero interface can cause a significant reduction in the system speed. Optimize in this regard the graphic system can be disabled by some AERO functions, but without losing the basic advantages of this mode. What functions Aero can be disabled, and which leave, and how to do it? And this is done like this:

In the control panel (PU) we find the "System" section and click on the line "Advanced system parameters".
Open the "additionally" and click on the "Parameters".
Open the visual effects tab.
Remove daws from all the parameters, in addition to the shown in the following figure, and click "OK".

Increase the speed of copying files

A new feature appeared in the seven - the so-called "remote difference compression". It is used when copying and moving files and consists in calculating differences in the source files and receiver. This is done to reduce the volume of rewritten data, but requires additional time to calculate their differences. This feature can be disabled as follows:

Select the "Programs and Components" section in PU.
Click on the line "Enable and disable Windows components".
In the built list of the system components, we remove the checkbox from the "Remote Different Compression" element.

Enable ReadyBoost Function

Winged developers optimization Windows 7 replenished new feature - READYBOOST. The assignment of this feature is to virtual expansion of the RAM of the computer, due to the connected external USB drives and Flash maps. The OS will be used as cache memory, thereby speeding up the read / write operations and increasing the speed of the entire system. Just required to include it, and for this you need:

Registry optimization

Computer registry files with Windows 7 is a kind of configuration database and settings of the OS itself and installed applications. This database, unfortunately, tends to alpine and fragmented over time. And since the appeal to it is performed very often, it can cause a significant drop in the speed of the computer. Therefore, the registry should be periodically cleaned and defraged.

Defragmentation tools built into Windows are not intended to work with the registry, so its optimization is usually performed using any third-party utility. As an example, you can bring a known to many users. cCleaner program. After it starts, you need to select the "Registry" item. In the window that opens, click the "Problem Search" button and wait for the results of the registry status analysis. If any problems are found, then you need to click the "Fix" button.

Defragmentation of hard drives

Strong fragmentation hard disks It is also able to cause a decrease in the speed of the computer. This is especially true of the system disk, as it is used in the operation of the system almost constantly. For its defragmentation, you can resort to the tool embedded in Windows - the Defrag utility. To start it, it follows:

Click "Start".
Click on "Computer".
In the window that opens, click on the PCM on the system disk and from the context menu to select "Properties".
In the Properties window, open the "Service" tab and click the "Perform Defragmentation" button. A window appears above:

As it can be seen from it, defragmentation can be performed in two modes - on schedule and manually. With manual defragmentation, first should determine its need to start the analysis of the disk. If after it is found that the disk is very fragmented, then it is necessary to launch its defragmentation by pressing the corresponding button.

Turning off uac

The UAC function (account control) is one of the most important means of ensuring system security. It is necessary to carefully weigh all "for" and "against" its disconnection. Nevertheless, many users are turned off, relyingly relying on high-quality anti-virus protection. The UAC function can be turned off fully or lower the level of protection. In any case, administrator rights are required for this. Changing the level of protection is performed in this way.

If you encountered bad performance Wondows 7.The system is quite often hanging, or maybe the program does not respond, and so on, then you can try some of my offers and recommendations that can help you solve these issues.

Selective launch:

Most of the time of the launch service can lead to problems that affect system performance. Clean loading can solve the problem of service that causes the problem. To determine this, we can use system Setup Program to find it.

It goes without saying that the first thing to be done is to always create a system recovery point!

In the Start menu in the Search field, enter MSCONFIG and press ENTER.

In the General tab, uncheck the checkbox - Download Startup elementsand then go to the tab - Service.

Then check the box to "hide all Microsoft services" and click »Disable all." Press the Apply button and restart the computer.

After rebooting the computer, you will see, the question is solved or not. If so, go back to msconfig and first go to the tab - autoload and make the first launch of the item and restart the system. You must do the same procedure until you find which services or elements of the startup cause the collapse of the system. I know it may take some time to find out which of the services does not work, but it is not recommended to constantly launch the system in - selective launch. Because the selective launch does not correct, but eliminates problems to find the guilty, which is the cause of the inconsistency of the system.

Believe me, most of the issues related to productivity can be solved on this step.

Driver Update:

Outdated drivers can lead to a system failure, so this is a good step to save device drivers up to date. you can find accurate model Device drivers and check the version and date of the driver, for this you can use the MSINFO32 file.

In the Start menu search field, enter and press ENTER.

Here's what Msinfo32 looks like, select each not Microsoft device and on the right sidebar you will find the device model, version and date of the driver, etc. As soon as you find the driver name, date and version, go to the manufacturer's website and in the appropriate section, download the driver and install it.

Do not use windows updates or third-party applications for automatic update drivers, because most of the Windows update time or any of the third-party applications will not find the last and top Driverswhich can lead to a system failure even call a blue screen.

Tip: I have seen a lot of cases when the drivers called on the display questions or lag associated with performance, it is better to update or reinstall the appropriate drivers from the manufacturer's website.

Maintenance system:

Service system is an important point When troubleshooting problems associated with the problem of performance.

Windows Update Center : It is important to update the operating system on a regular basis, as there are many updates, which will solve the system of improving system security. Feel free to run the update. If you have some errors when updating or, if the update cannot be started with Microsoft, use the tool System Update Readiness Tool.Microsoft has released an instrument SYSTEM UPDATE READINESS TOOL To solve certain conditions, which can lead to installing updates and other softwarewhich does not work properly. You do not need to manually run this tool. This tool automatically connects the computer with the Windows Update Center with the condition that the tool can solve performance problems.

Cleaning Junk Files.: The program cannot look like a big step to solving such issues as system performance, but believe me, there are many situations where this program makes your business. There is a built-in cleaning agent in Windows 7. which will help you delete temporary files, etc., but I would recommend free program which is called . It deletes temporary and unused files from your system - allowing Windows to work faster and freeing the hard disk space. She also clears tracks of your activities on the Internet, such as an online history.

You may or may not use the registry cleaner, this or any other registry cleaner program. It will not bring any benefit for your operating system, may even damage the system. Decision of course you are! Check out one of my articles for more information.

Search for viruses: Most often, malicious Trojan infections can lead to the unstable behavior of your operating system. Perform a complete check of viruses and make sure your computer is clean. There are many free antivirus programs. I would recommend to have a very low imprint of the system and less false positives.

Then download free versions or EmsiSoft Anti-Malware 6.0 and fulfill full scan in safe mode. If you find an infection and cannot delete it, you can use the comment form below to ask a question, and I will try to answer your questions about system System, I I will be more than happy to help you solve your problem.

Checking the integrity of the system: Teams SFC / SCANNOW. (Check system files) checks the integrity of all protected systemic windows files 7 and replaces the wrong and damaged versions on right versions, if possible.

Go to the Start menu and in the Search field, type CMD then right-click on it and click on the Start button on behalf of the administrator.
Then enter the type SFC / SCANNOW.
This article will help you analyze SFC magazines.

Diagnostics of equipment:

The next step, I would recommend running the equipment scan to make sure that there are no hardware failures of the collaborators of the system. First check RAM following articles that explain the process Advanced Memory Diagnostic on Windows 7, C,run the diagnostics of the hard disk, each manufacturer usually has its own diagnostic tools for checking hard drives .

The program monitors the status of hard drives, controls performance and temperature, and also checks the fragmentation of the file system and the registry. In this case, the fragmentation check occurs only at the moment when the computer "is idle" and all system resources are free. Download free program hard checks Disc, you can, on the following link -.

No less interesting and useful program For hard drives - - This program includes various tools for servicing hard drives: tool for repairing the defective sector, speed test, information s.m.a.r.t. , Test the surface of the hard disk, checking the media stability and the test of the kotroller.

Uses s.m.a.r.t. The technology for monitoring the health status of the hard disk, thereby prevents data loss and predicts possible disk failures. The program also includes HDDBadSectorRepair (repair technology and restore bad sectors on a hard disk). Download for free, you can download the following link

The latter, but no less important, version of the legitimate Windows used. Illegal or copy from torrent may seem comfortable, but you are subject to your security and risk data, and it can cause many questions to your operating system.

It is hardly possible to doubt that the most better performance Windows 7 has immediately after its installation. The system disk is a practically newborn, there is nothing superfluous in it, so the system "flies." Yes, Windows 7 manufacturers have tried to impress their future users, especially those who fulfill the replacement of their previous system on Windows 7. At first everything goes perfectly. Seed starts, shows a decent speed than the user pleases, but then she begins to upset it with his "Tugodum."

Unfortunately, the developers of Windows 7, probably working on supere-speed PCs, have little thought about the multiple settings that are responsible for the speed of the system, based on the fact that the main mass of users will be a housewife with their laptops and tablets. And not every more educated user, especially if he has problems with English, is available that information on setting the system parameters to increase its speed, which is posted on the Microsoft website. The article attempts to tell users how to optimize Windows 7 is possible, to introduce them with its admission to increase the speed of the operating system and the computer as a whole.

Accelerating Windows 7 Downloads

It is unlikely that the user will like if the operating system loads have to wait a few minutes. Although the download of the computer from Windows 7 occurs previous versions of the OS, many users do not mind to speed it up with some admission.

Using multi-core

To enable support for multi-core processors, you should enter the word msconfig in the search bar. Then you need to go along the Load Tab - "Advanced Parameters" - "Number of processors", mark it, set a value equal to the number of cores in the installed processor, and complete all by pressing "OK".

Then you need to restart the computer and make sure that the operating speed of the OS is incremented.

Turning off applications from autoload

OS boot speed also depends on the number of applications that are loaded simultaneously with Windows loading. The list can be seen on the same MSCONFIG command, but on the "Autoload" tab:

Acceleration of PC shutdown

You can also speed up the computer shutdown if you can reduce the value of the time interval valued to complete active programs. If at the same time they will not have time to end independently, then Windows will stop them forcibly. To reduce the power off time, you must edit the registry. Without going into the details of this process, it should be said that the registry needs to find the WAITTOKILSERVICETIMEOUT parameter and change its value from 12,000 to 2000.

Accelerate the launch of applications from the Start menu

If the classic view of this menu is not used, then optimize it, that is, to increase the speed of its operation as follows:

Press the PCM on the taskbar or the Start button.
From the context menu, select subparagraph "Properties".
In the properties, open the tab "Start" menu.
On the Click "Configure" tab.
Delete the checkbox from the "Allow recently installed programs" item.

Acceleration graphics

In the control panel (PU) we find the "System" section and click on the line "Advanced system parameters".
Open the "additionally" and click on the "Parameters".
Open the visual effects tab.
Remove daws from all the parameters, in addition to the shown in the following figure, and click "OK".

Increase the speed of copying files

Select the "Programs and Components" section in PU.
Click on the line "Enable and disable Windows components".
In the built list of the system components, we remove the checkbox from the "Remote Different Compression" element.

Enable ReadyBoost Function

The developers conceived by the developers optimization of Windows 7 was replenished with a new function - ReadyBoost. The assignment of this feature is to virtual expansion of the RAM of the computer, due to the connected external USB drives and Flash maps. The OS will be used as cache memory, thereby speeding up the read / write operations and increasing the speed of the entire system. Just required to include it, and for this you need:

Registry optimization

Computer registry files from Windows 7 is a kind of configuration database and settings of the OS itself and installed applications. This database, unfortunately, tends to alpine and fragmented over time. And since the appeal to it is performed very often, it can cause a significant drop in the speed of the computer. Therefore, the registry should be periodically cleaned and defraged.

Defragmentation tools built into Windows are not intended to work with the registry, so its optimization is usually performed using any third-party utility. As an example, the CCleaner program can be brought by many users. After it starts, you need to select the "Registry" item. In the window that opens, click the "Problem Search" button and wait for the results of the registry status analysis. If any problems are found, then you need to click the "Fix" button.

Defragmentation of hard drives

Strong fragmentation of hard disks is also able to cause a decrease in the speed of the computer. This is especially true of the system disk, as it is used in the operation of the system almost constantly. For its defragmentation, you can resort to the tool embedded in Windows - the Defrag utility. To start it, it follows:

Click "Start".
Click on "Computer".
In the window that opens, click on the PCM on the system disk and from the context menu to select "Properties".
In the Properties window, open the "Service" tab and click the "Perform Defragmentation" button. A window appears above:

Turning off uac

The UAC function (account control) is one of the most important means of ensuring system security. It is necessary to carefully weigh all "for" and "against" its disconnection. Nevertheless, many users are turned off, relyingly relying on high-quality anti-virus protection. Function or reduce protection level. In any case, administrator rights are required for this. Changing the level of protection is done in this way:

In the PU, open the section " Accounts users. "
In the resulting window, click on the string with changing the control parameters of accounts.
In the window shown in the following figure, we set the slider into one of the 4 levels of protection levels. In the lower position, the UAC is completely disabled.

Disable unused services

It is no secret that the system has services that are rarely used, or not used at all. It is clear that such services can be disconnected without harm to the operation of Windows 7. Moreover, their disconnection will give the release of RAM, a rarely access to the swap, that is, the acceleration of the computer. This tool requires marginal caution and accuracy, so before run it, you should progress by creating a recovery point. This will help perform rollback to the previous state in case possible problems As a result of their disconnection. You should not perform this operation in group mode, it is better to make step-by-step, every time convinced in the normal functioning of the operating system.

Completely safely exposed to such services as:

REMOTE REGISTRY (remote registry).
Support IP Service (IP Support Service).
SERVICE ENTRY TABLET PC (Tablet PC Input Service).

Turning off other services, you need to have complete confidence in which result it will lead.

To disable any service, go to the "Administration" section of the control panel and select the "Service" category appeared on the right side. As a result, a list of all system services will appear. You need to find the desired service in this list and click on it twice. A window opens with the parameters of this service, for example:

If the service is running, then you first need to stop using the corresponding button. Then in the "Type of Start" parameter, set "disabled" and click "Apply" and "OK".

Conclusion

Of course, it was not held here full list Acceptance of the optimization and configuration of the computer with Windows 7. In conclusion, we present the table of the best third-party programs for windows optimization 7. They all have a different functionality, which is also specified in the table.

Windows 7 is the most popular operating system from Microsoft Corporation. Many users love her for an understandable interface, functionality and stability. However, over time, the system begins to give mistakes one by one another, its speed is reduced, so it is so important to know the reasons for these phenomena and methods that allow you to improve the performance of your computer.

How to set up windows 7 for maximum performance

Operational windows system 7 Sooner or later begins to suffer from the weight of the software that is established during the usual use. New loading software can significantly reduce the speed of the computer. It is recommended to delete all programs that you do not plan to use.

Anti-virus scanners and disc cleaners, as a rule, start automatically when the computer is turned on and operate in background mode. Many users do not even know that they are running. And the programs at this time lead to the slow start of the PC and, if not closed after the computer is turned on, reducing its performance.

Setting the registry to optimize the performance of your system

There are several ways to clean the registry to improve computer performance. Consider each of them.

Through speed parameters

Through folder parameters

Through the properties of services

What makes the command "msconfig"

The "msconfig" command is a standard utility created to manage automatically start-up programs and boot Windows. This program allows the user to configure the launch of the PC and remove unnecessary programs from the startup. With it, you can also detect the virus if the computer has been infected.

Video: How to speed up Windows 7 using the "MSCONFIG" utility

Setting up Windows 7 to maximum performance with third-party programs

On the Internet there are many utilities to automatically clean the computer from temporary files and optimize its performance. Consider a few of them.

CCleaner

CCleaner is a widely used utility for cleaning temporary files, cache or personal data. The program has a wide functionality: from minor settings to complete removal Information from disks.

The CCleaner interface is simple and convenient. It is enough to go to the application and click the "Analysis" button to start looking for temporary files that clog the system and which can be deleted.

Also using CCleaner can be cleaned with cache.

When you open one or another website in the browser, all text and graphic information From this site is loaded from the server and saved in the cache. Your computer remembers this information in order to download the site in the future much faster.

Frequent cache cleaning will make it possible to free the place, but will reduce the speed of your web browser, as the sites that you often go will again be downloaded from the servers.

ADVANCED SYSTEMCARE FREE.

ADVANCED SYSTEMCARE FREE is a popular program for cleaning and optimizing PCs. It allows you to optimize startup elements and clean your computer from unnecessary files and registry entries with one click.

IN latest version Programs have improved cleaning from temporary files. In addition, the developers have been added to clean the installed driver packages, which allows you to free on the disk. Advanced SystemCare using the built-in resource manager shows the processes with high resource consumption of RAM, CPU and disk, and then helps to complete them.

New Faceid functions ("face identification") and Surfing Protection & ADS-removal ("Surf protection") provide PC protection at a higher level. Faceid automatically detects intruders who secretly turn to your PC. Surfing Protection & Ads-Removal provides you with a new, safe and free content for online surfing.

Privacy SWEEP Tools ("Spyware Removal") and Real-Time Protector ("Repair Vulnerability") Advanced Systemcare 10 helps you remove more threats and correct more confidential problems.

Power Setup

The selected power type affects the performance of your computer. When you use a high-performance power plan, you increase energy consumption by computer, but at the same time let it work at full power. However, the performance of the computer will still depend on the work that it will perform.

Three types of power supply are isolated:

balanced is a power plan that is selected by default and is designed for a balance between saving battery and computer performance. The mode automatically increases the speed of your processor or reduces it if your computer needs it in this;
high performance is a power plan designed to maximize system performance and speed. The mode does not reduce the speed of your processor and then when the computer is not used. When using a laptop with a battery power, you can use a high performance plan;
energy saving is a mode that saves electricity by reducing the speed of the processor and the brightness of the screen and allows you to maximize the operation time of your computer.

The decrease in the screen brightness increases the duration of your battery. To squeeze out of your laptop more time autonomous workYou can simply reduce the screen brightness manually.

To activate high performance mode:

How to find out the performance of your computer

Video: How to find out the computer performance estimate

There are many ways to improve the performance of your computer. You can use as standard windows utilitiesand special programs for cleaning and optimizing the system. They perform their work in minutes, but their use allows you to significantly speed up the system. The main thing is to use proven methods and download programs from reliable sources.

Risk lovers can try to dispersed the central processor. This method is not suitable for many, because not every CPU can accelerate. But if successful, buying a new "stone" can be postponed for another year. Read our. The essence of this operation is to increase the voltage on the central processor, and thereby an increase in its clock frequency. The operation itself is quite risky and far from all processors, in some cases you can simply deal with the CPU, or significantly reduce its service life.

To approximately determine the weak points of the system, use the built-in computer performance evaluation feature, which we have already talked above. Determine the "weak link" can be estimated that are displayed after testing performance. Where the lowest estimate, in the direction and it is necessary to increase the power of the PC. For example, if there is a lowest assessment near the data exchange rate on the disk, then it is worth thinking about buying a more smart hard disk.

Cleaning indoors, repair of faulty cooling system elements

Various malfunctions in the cooling system are also able to significantly slow down the operation of the entire system. If the cooler breaks on the central processor, then this is a drive to its overheating and a reduction in clock frequency.

Overheating is generally a dangerous thing and may occur even with a serviceable cooling system. Take, remove the lid from your system unit, look at how much dust there. It does not just cover all the surfaces, but also tightly clogs into all radiators and settles on the blades of coolers. Dust acts as a heat insulator, which leads to overheating. Very carefully clean system unit And you will be able to increase the speed of the computer, as well as extend the life of its components and get rid of the main seatingman of various allergens and bacteria - dust.

Clean the hard drive from all unnecessary, we perform defragmentation

Those who first hear the term "defragmentation" should understand that this is the very first thing to do to increase system performance. Defragmentation allows you to collect various fragments of programs that are in different parts of the hard disk, in one pile. Due to this, the reading device of the hard drive does not need to perform a lot of unnecessary disks by disks, because everything is in one place. Thus, the performance increases.

In addition, it is necessary to get rid of unnecessary information and all sorts of software, which accumulates on the disk with the time of work. This is especially important when there is practically no in the operating system section free space. If there are less than 2 GB, the system loses its performance. So do not overload the disk and try so that it was a percentage of thirty free space, if it is certainly possible.

Reinstall Operating system

This step almost always helps to increase the speed of the computer. In some cases, productivity may increase three times. It's just that the essence of the operating system, over time, accumulate in it various errors, it is clogged with unnecessary services that even fulfill major changes in the system itself. This and much more leads to a deterioration in the speed of the computer, many operations are now required much more time.

If you carefully monitor the cleanliness of the system and do not install anything there, you can use the same Windows for years. But most often, the computer constantly moves on the computer: drivers are installed and deleted, drivers are updated, large volumes of varying information are loaded - in such conditions, the system is gradually starting to "shy". Best of all, for prevention, somewhere in a year format the disk and from a clean sheet to install a new operating system.

We optimize the work of the OS.

We recently did, because it is properly configured and optimized - the main key to the performance of the computer! Setting up the system, quickly and without unnecessary problems, can be made using special utilities. For example, Aerotweak copes with these tasks.

The PCMEDIC program showed well. The main chip of this utility is the full automation of all operations. You only need to select suitable options and run the setup process.

The program consists only of one main window. Here we choose our operating system, type central processor (for example, Intel or AMD), then you need to select one of two ways to optimize - Heal (System Cleaning), or HEAL & Boost (except for cleaning also acceleration). After select All Options Press the button "Go" - the program will perform all the necessary changes.

There is another program that boasts truly powerful functionality - Ausloqics Boostspeed, unfortunately, paid. It consists of several utilities that allow you to perform the optimization of the system in almost all directions. Using this application you can deal with defragmentation, clean file System, Clear the registry, increase the speed of the Internet and many more. The program has a built-in adviser who helps determine the priority directions in the system optimization. Although I recommend not to trust the advice and watch blindly, whether these all actions are really needed.

In order to clean the system from any rubble, there are many special applications for the cleaning. For example, a good helper can be CCleaner. It is able to clean the disc from unnecessary, temporary falamas and perform the registry cleaner. By removing unnecessary files, you can increase the amount of free disk space. But when cleaning the registry, it is not observed a special increase in productivity. But if any important parameter is randomly removed, the system will start issuing errors and it can lead to serious failures.

ATTENTION! Before performing all these actions, it is strongly recommended to create a recovery point!

Always see files that remove utilities for cleaning the system. There are cases of irrevocable removal of the necessary and even important files that are falsely taken for unnecessary, or temporary files.

Windows 7 users can slightly improve the speed of the computer using the graphical interface simplification. What to do this Open the control panel and go to the System section Open the "Advanced" item and select "Parameters". Here we remove the part of the unnecessary flags, or install the switch to the position to ensure the best speed.

Customize BIOS.

The BIOS stores the parameters of the computer responsible for the equipment, the OS load, time and other key items. To get into bIOS Parameters, in the process of turning on the PC, before loading the operating system itself, press the DEL, F2 key or other (it depends on the manufacturer motherboard, Typically, the key name is displayed on the screen). Most often, the BIOS settings do not cause any reducing performance and do not even climb there. But in rare cases, with incorrect critical parameters, your computer can start braking.

If you doubt the correctness of the settings, but you do not know what you need to specify, you can use the option automatic setting The optimal parameters "Load Optimal Settings" (the function name can be different, depending on the manufacturer). After that, save all the settings and restart the computer.

Turn off all unnecessary, control the autoload

Nowadays, almost every program tries to register yourself in autoload. And it is not too fun for your system. Gradually, programs in the autoload are accumulated and all must be started, each time the system starts. Because of this, the computer is turned on very long and turns off. Additionally, after autoloading, all these applications remain in working condition, devouring resources. You just take a look at how much problems in the taskbar (near the clock) of unnecessary icons, do you use them? Therefore, it is best to delete unnecessary applications, or at least turn off the startup for them.

To see all applications that start with Windows, and turn off the extra, simultaneously clamp the two Win + R keys and write msconfig in the next window, then press ENTER. A system configuration window appears, now go to the startup section. Here will be a list of applications in autoload. Just shoot the checkboxes from all that do not use. In which case, the program can always be returned to the startup, setting the desired tick. The main thing is to have an idea what kind of programs and what their appointment is.

In the most extreme cases, you can turn off the antivirus, and the system will unload a bit. Due to this, productivity will increase. But this should not be done when you are on the Internet, or establish new programs, because there is a risk of infecting viruses.

We perform updating drivers

This step can give the desired effect if outdated drivers are installed or those installed together with the system. Most of all can affect the driver for the motherboard, although others do well affect the speed of work.

It is safe to manually perform driver update. But the most lazy can take advantage special utilitieswho are able to determine required drivers, Find them on the Internet and install. For example, you can use DROVER CHECKER.