Where in the settings to find the iPhone. Disable the "Find iPhone" function in iOS11 in ICloud settings

Our instruction on disconnecting the "Find iPhone" function is suitable for devices:

Apple iPhone 7 (iPhone 7);

Apple iPhone 6 (iPhone 6);

Apple iPhone 5 (iPhone 5);

Apple iPhone 8 (iPhone 8);

Apple iPhone X (iPhone X).

In case you have not found your device in the specified list, you can focus on the version of the phone software. All stages of disconnection of the search for iPhone are applicable to the IOS of the following versions:

Each user or reader can ask your questions in the comments to this article. We will try to answer them as quickly as possible.

What does Find My iPhone mean?

The Find My iPhone application allows you to calculate the coordinates of iPhones, iPadov on any version of iOS or poppies in any places. Whatever it was, the action of such software is not always a necessity. It is, for example, selling a favorite device. Having received an apple gadget, his new owner will be able to dispose of your personal information. It is impossible to allow this. You will need deactivation of the described application. After the procedure of this kind for the safety of personal data, you can be calm.

Important! If you want to turn off the Find My iPhone before selling the gadget, it is best to destroy all the content by deleting an account from the device. You will be sure that your privacy does not threaten anything and all apple records reports and contacts will remain exclusively in cloud service ICloud or on your secondary devices.

How and where to disable \\ phone settings?

You can deactivate the application directly on the device. If the electronic friend is still with you, perform the following manipulations:

From now on, the location of your apple pet determine through the described software will not be possible. To activate the service, repeat all the steps presented in the reverse order.

How to disable the function Find the iPhone through a computer or via a browser remotely?

Make it even easier than "dig" in the phone settings.

Attention! Finally make sure that you really want to destroy all the data on the gadget. If they are erased, then the paths are no longer there.

The system will display a warning notification: in the upper right corner of the pop-up window, click on the cross. Do not confuse it with a cross to close modal window. "This device will appear again when connected to the Internet." We agree and delete by clicking on the device's deletion button.

How to Clean Gadget With Find My iPhone

Find My iPhone can be disabled remotely, but this is not the limit. You can completely erase software, as well as other data:

Run Find My iPhone.

We enter your account on icloud.

Click on the name of the device with which work should be carried out.

Below we find the inscription "Actions" (Actions), click on it.

In the lower right corner of the screen, the inscription "Erase" (Erase) will appear.

All contents, as well as settings, will be deleted, including the device and account from the memory of the smartphone.

A couple of simple actions - and your gadget returned to the factory parameters. The ideal option for those who simply lost the favorite device.

Details Benks. Created: April 27, 2018 Updated: April 27, 2018

Service "Find iPhone" in IOS 7 provides enhanced security and
Complicates theft of devices. It should be noted that the service "Find iPhone" in OS
iOS 7 affects the service process. It is extremely important to explore the detailed
information and answers to frequently asked questions about maintenance,
relating to the "Find iPhone" service in IOS 7, before starting to
Maintenance of devices with iOS 7.
1. Disconnect the "Find iPhone" function on devices with iOS 7 before
repair if the repair is associated with the entire device replacement, motherboard Separately or if you need to flash the device in the Rammon process.

A. Before making a device with IOS 7, require repair from client shutdown
"Find iPhone" services. With the failure of this requirement, the repair will be
It is impossible to implement.

B. The client can disable the "Find iPhone" service in several ways. Everyone
From these methods requires an Apple ID ID and Password Owner
Devices.

Methods of disconnection

1) Disable the "Find iPhone" service
Select Settings\u003e ICLOUD and disable the "Find Iphone" item.
2) Exit iCloud
Select Settings\u003e iCloud and click Delete Account.
3) Delete content and configuration from the device
Select Settings\u003e Basic\u003e Reset\u003e Erase Content and Settings.
4) Remove the device from account Website icloud.com

• Ask the client to enter the website www.icloud.com/find using your
  Apple ID identifier.
• If the device is not online, click Delete from the account.
• If the device is online, click Erase. Upon completion of the erase process
  Click Delete from an account.
• C. If the erase of the device is already executed:
  If the client argues that the content and settings have already been removed from the device before
  making a service device need to make sure that the service "Find
  iPhone "is disabled and the device is not marked by the owner as lost. Perform
  The following steps.
  Turn on the device and move the lock runner to start the process.
  Settings.
• Choose language.
• Select a country.
• Select Network and click Next.
• When the device performs an activation attempted, one of
  The following:
• A request to enter an Apple ID and password of the current
  owner.

This means that the device is still associated with the account of this
User. Ask a client to enter your Apple ID and password identifier,
To delete a device from an account. If the entered data is correct,
Continue in normal order. If the data is incorrect, do not take
The service device is most likely after repair it turns out that repairing the device did not make sense

b) A pop-up warning will appear that the device was lost.
This means, the owner lost the device and remotely erased everything from it
data. Ask a client to enter your Apple ID and password identifier,

2. Questions and Answers

A. How to be if the battery is discharged in the device?
Connect the device to the power source. When the battery will be sufficient
Charge, the device will turn on automatically. Before receiving the device on
MAINTENANCE Perform a standard procedure for disabling the "Find iPhone" service.

• B. What to do if the device does not turn on even after connecting to
  charger?
  If the device is connected to the power source does not solve the problem, delete
  Device from client account via website icloud.com:
  Ask the client to enter the website www.icloud.com/find using your
  Apple ID identifier.
• Select a device you want to delete from an account.
  If the device is not online, press, remove from the account. If the device B.
  Networks, click Erase.
  Upon completion of the erase process, click Remove from the account.

C. How to be if the client does not remember the Apple ID Password?
Direct the client to the site "My Apple ID" (appleid.apple.com/en) to reset the password.

D. What should I do if the client has forgotten an Apple ID identifier?
Username Apple ID is the address emailif a person also does not remember him, you need to call apple support.

E. What if the employee forgot to ask the client to disable the service "Find
iPhone "before making a service device?
If the device is still connected with the client account, maintenance
The devices will not be possible. Contact the client and ask him to remove
The device is remotely from its account, running the program "Find iPhone"
on another iOS device or opening the web site icloud.com/find on computer MAC. or
PC.

• Our blog in telegrams:
• Twitter:

Suppose your mobile iPhone device for any reason failed. You decided to give the phone an employee who is engaged in the repair of such devices, but a problem arises, since he simply does not want to take such a communicator for repairs. Motivation in most cases is that in almost every gadget, a special function "Find iPhone" is enabled. If you decide to pass the device in service center, then you must definitely be deactivated. Today we decided to disassemble a very interesting question - on how to disable the function "Find" Iphon ".

Necessity

This possibility is actually very useful in the case when you do not have access to a mobile device, it may be after losing or even theft. Using the function, you can block the device, send completely any text messages, turn on the sounds and emit any data. If your phone was stolen, then you can put "Castle" on it, so the attacker can no longer be able to independently activate, even if the firmware is changed. Be sure to remember that you can block the phone only if you know Apple ID and password. If this is not the case, there may be problems in your activation of the device.

Turnover

On the one hand, it is safe to say that the "Find iPhone" function is very useful and relevant. But if you consider another edge, then it is easy to understand that this is fraught with the user itself. After all, if the device failed or was blocked, then you must know how to disable the "Find" iPhone "function" through a computer.

Features iTunes.

If you have previously had to contact the service center for repairing your mobile iPhone devices, then you know that the employee is sure to disable the search function. This is required not only for personal safety, but also so that after restoring the system system, it is not blocked in automatic mode, and if it happens, then the device cannot be restored. After you find out the answer to the question of how to disable the "Find" iPhone "function," and make it, remember that your gadget cannot be found. Let's look at what you can not do until the "Find iPhone" function is disabled. First, you will not be able to restore the device in iTunes if necessary, and even if you try to execute it, in any case the program will give you a warning. Secondly, you will not be able to delete all the settings and mobile data data (in fact, this action is also sometimes required). In any case, if necessary, you can always enable the feature back.

So let's start solving the question of how to disable the function "Find" iPhone "" through "Aytyuns". Go to the program and find the disconnection of the necessary feature. Be sure to remember that the function should be deactivated from another device or from one, but in any case there must be an active connection to the Internet. Let's now consider where to find the opportunity of interest to us, and decide the question of how to disable the function "Find" Iphone ". On the mobile device You should visit the settings and go to icloud. Next, there you can find the function "Find iPhone", and only you want to disable the switch.

Without password

Starting with the seventh version, the means of combating theft of phones appeared in iOS. Special service tracks the location of the device and allows you to remotely block it if the iPhone is lost or stolen. In the daily use of the phone, the Find My iPhone function ("Find iPhone") is recommended to always include. But sometimes it is required to temporarily deactivate. In what cases it is necessary and how to disable the search is described below.

When you need to disable the Find My iPhone service

If you have suffered a phone to repair or decide to sell it and buy a new one - and in the other case, you need to turn off the device's protective mechanisms that are part operating system. The manufacturer company implemented the configuration function for the stolen or lost phone can tell the owner to its location, and having received the blocking command - reset the settings and minimize the available functions. In the blocked state, only calls to the number 911 or the number specified by the owner of the device during registration are possible from the phone.

The main protection tool is the "Find iPhone" service function. When the phone with the working search mode goes to the new owner, it will work normally before the first attempt to reset or update. The Find My iPhone service will require to enter an Apple owner ID, and if this code is not entered or is incorrect - blocks the device. Therefore, before selling a device or a visit to the repairmen to make manipulations with software, SERVICE "FIND IPHONE" Be sure to turn off.

The FIND My iPhone function enabled will not allow the following actions with the device:

The problem may also occur when buying an iPhNE in the secondary market or on one of the foreign auctions. After receiving the parcel and turning on the machine, you will find the requirement to enter the password from recording the icloud, which the seller has not turned off for some reason. If the iCloud is active "Find IPHNE" mode, then when trying to flash or reset to factory settings, the phone will become inoperable.

This case is the most difficult, since without access to the Apple ID, the use of a smartphone is impossible. Depending on the iOS version and the phone settings, will not be available or only phone calls, or even all the functions of the device. Therefore, when buying, be sure to make sure that ICLOUD is untied from the account and the "Find iPhone" mode is disabled.

Turn is not good and even criminal offense. And in case of finding someone else's gadget best idea - Say the owner and return the device to him. The service "Find iPhone" will help in this by providing you with the contact number of the owner.

Ways to disable the service "Find IPHNE"

There are several ways to disable the function both using a computer and directly from the iPhone or iPad device. For any of them, you will need to connect to the Internet, as well as the username and password from the Apple ID to which the device is attached.

Please note: access to the network should be both a device from which is shutdown and the device that is replicated from the service. The geolocation service should also be included on the iPhone turned on.

Disabling by means of the iPhNE or iPad itself

This method suggests that the device is working, it has access to the interface of the operating system and the Internet, and you also know the authorization parameters of the account.

Disable by deleting an ICloud account

This method is best suitable for the device to be given to repair or sell - at the output you will get a clean device without user bindings and data. You will only remove the multimedia files from the phone (music, photo and video) and call history.

Video: Reset iPhone settings by removing the iCloud account

Refusal to "Find IPHNE" with the application of the same name

If the device is inoperative or there is no physical access to it, you can deactivate the search function from another Apple apparatus. Widget "Find IPHNE" available, starting with iOS 7.0.

1. Run the application "Find IPHNE" from the device's desktop.
2. Enter the authorization settings of the APPLE ID. Do not mistake: you need the same entry to which the disabled device is tied.
3. Wait until the program updates the status of all devices tied to your account. It will take some time depending on the settings of the geolocation service and communication channel speed.
4. Select the device from the list on which you want to disable the "Find iPhNE" function, slide the string to the left and press the Red "Delete" button.
5. Deactivation of the search function will be available only for those devices that are turned off or do not have access to the Internet. If the device works and connected to the network, then the "Delete" button will be inactive in the program.

Confirm deletion. The phone will leave the list of conjugate devices, it will be possible to restore it, flash and delete user data, pre-translated into dFU mode or recovery. Be careful: with other ways to restore, activation lock may turn on (Activation Lock)!

In normal working mode in order to restore the device from backup, as well as to erase content from its memory, you will need to disable "Find iPhone" on the iPhone itself, otherwise itunes will not execute a request. And if the remote device before recovering or updating the firmware is again connected to the network, it will again appear in the "All Devices" menu and the activation lock turns on. After removing the device from ICloud, do not connect it to the Internet.

Disabling from the online browser laptop, tablet or stationary PC

To access all the functions of the ICLOUD service, it is not necessary to be the owner of the iPhone. or iPad. Site iCLUD.com is available from any browser, except the oldest. That is, almost any laptop, a stationary PC and even an old pocket computer can disable the protective mechanisms for the iPhone service. To do this, open the CLOD website or go to a direct link.

As soon as you entered the password to Apple ID and click the "Finish" button, it will not work back back.

Video: ICLOUD website - your iPhone management item

All described methods will work only if you know the data for logging in APPLE ID.Otherwise, even the structure of the iTunes device will not pass activation.

Lifehak №1: Disable search without password account Apple ID

In iOS 7.0, hackers found loopholes in protection, which allows you to disable the search service without entering an Apple ID password. This vulnerability was quickly detected and closed, so you can only use it on iOS version 7.0, not higher. It is impossible to roll back to version 7.0, so the method is suitable for a very small amount of devices whose hosts ignored the installation of the proposed updates.

Need to make the following manipulations:

1. Log in to "Settings", from there Go to ICLOUD.
2. Enter any text to the password request and click Finish.
3. In response to an incorrect password, click OK, and then "Cancel" to return to the ICLOUD screen.
4. Open account settings again.
5. Erase all data in the "Description" field and click Finish.

Lifehak №2: Resetting the icloud parameters using letters to technical support

Unfortunately, it may turn out that you have a phone on your hands, for which there is no Apple ID data. For example, you bought it from hand or on an online auction. If you are deigning english language And you have minimal skills to work with graphic editors, try contacting Apple technical support, for which provide the following materials:

1. Letter-address describing the essence of the problem: Forgotten or lost access to mailboxto which the device is assigned and password Apple. ID has not been preserved. Be sure to specify the contact number of the phone in the text. It is also desirable to confirm the accuracy of what you communicate, otherwise the likelihood of getting a failure.
2. Photo device on background original packaging (boxes).
3. Checks and warranty card confirming your property rights. It is very important that the store letters a guarantee and issued checks was an authorized Apple's sales point.
4. If there are no such documents - the scans are easy to find on the Internet and with the help of a graphic editor to give them a reliable appearance.

Send documents to email address technical support Apple, budgeties and wait for a response. It should be borne in mind that in technical support are well aware of the scans of documents on the network, and graphic editors. Therefore, the percentage of positive answers to such applications is low - more than half of the cases comes to failure. But if there are no other options, this way you can use - do not throw away the same phone, which, in principle, Wuppies and is operational.

What to do if the service does not turn off

Problems with deactivation of the search service may be caused by the following reasons:

1. The device does not have access to the Internet. Make sure that the device is turned on WІ-FI or ZG.
2. Apple's password pair, which you enter, and the account, to which the iPhone is tied, do not coincide. Enter the correct login and password of the ICLOUD service.
3. the iPhone is connected to Іtunes, as a result of the "Find iPhone" setting automatically turn on.
4. On the gadget that you are trying to untie, the geolocation service is turned off, which is why the system cannot determine its location, and therefore, and disable the "Find IPHNE" service.
5. The iPhone was produced by hacking the operating system - Jailbreak.

All considered methods of deactivation of the search service require the knowledge of the authorization parameters of the APPLE ІD. Those few "holes" - vulnerabilities in the system, which allowed to bypass the search function without unlocking iCloud, apple company Closed already in version 7.1 of the IIS operating system.

When registering APPLE Іd, use reliable mail service, install a complex password and be sure to save it in you only place.

Deactivating the search service and making with the phone everything is scheduled (repair, firmware, recovery), be sure to turn on the service again, since it turns off the vulnerability of your mobile device.

On all tablets and phones from Apple, there is a "Find iPhone" function, which allows you to determine the location of the stolen or lost device using satellite geolocation at any time. If you synchronize the device with iCloud servers via Apple ID, then get access to it. But in some cases this feature is worth disconnecting. You can do this in several ways, including through a home computer.

When you need to disable the "Find iPhone" function

Perhaps the function has been activated by chance, or access to your apple account The ID is not only with you, and you do not want this person to determine your location. Also, it is worth remembering that people consisting in the "Family Access" group may view the location of each other if you do not prohibit it in the settings.

If you try to recover or update the firmware of the device via iTunes when you enabled "Find iPhone", you will see a bug that will ask you to turn it off.

Error trying to restore the device

When you try to erase the settings and content of the device, you will also receive a notification asking for deactivation of the "Find iPhone" function.

Reset settings and content device is impossible

How to deactivate the function

There are several ways to help you turn off the "Find iPhone" function. Which one to choose, depends on how the device you are going to do it.

IOS for iPhone or Apad

The following methods are suitable for those who will perform all the steps from the iPhone, iPad or iPod Touch.

Through the settings of icloud.

Through the full shutdown icloud

Through the application

The minus of this method is that the device on which you disabled the function, when you first connect to the Internet, it activates it again. That is, to finally deactivate the function, you need to do it through the settings of ICloud.

Through a computer based on Windows, Mac OS or through Android

For all these platforms, there is a single way to disable the "Find iPhone" function - through the official ICLOUD website. The only thing you need is an online browser.

1. Follow the link: https://www.icloud.com/#find and log in.

   

2. Expand the "All Devices" menu.

   

   Click the "All Devices" button.

3. Select the phone or tablet on which you are going to turn off the function.

   

   Select device

4. Detailed information about the device will open, click the "Erase iPhone, iPad" button.

   

   Press the "Erase" button

5. Confirm the action by clicking the "Erase" button.

   

   Confirm the action

6. Push the password from your Apple ID account.

   

   We enter a password

7. If you want, enter the number, it will be sent to the device on which the function is disabled.

   

   We enter the number

8. You can add a text message to the entered number.

   

   Enter a message

9. Ready, confirmation sent to the device. Finding iPhone Function will be disabled as soon as your phone or tablet connects to the Internet.

   

   Function disabled

Is it possible to disable the "Find iPhone" function without an Apple ID password?

The answer is no, since this is a violation of simple security rules to which Apple will not go. If you could turn off this function without a password, then it would simply mean. The attackers would crawl devices and turned off this function, and finding the device would be completely impossible. In one of the versions of the iOS firmware was a hole with which it was possible to disable the "Find iPhone" function without a password, but it was quickly corrected in the next update.

What if it is impossible to disable the "Find iPhone" function?

The problem may occur if you disable the function not through the settings of the device itself, but from another phone or computer. An error occurs if the device is connected to the Internet during the disconnection process, or simply enabled. Output one - Disable the device from wi-Fi network or mobile Internet, And if the first did not help, completely disable the device so that it flows into the offline mode.

Turn off the device

Remember that to disconnect the "Find iPhone" function is only as a last resort, since you can never predict: you have to look for a device or not. If you have disabled it to perform the operation to recover, update or reset the device, then as soon as you finish the process, activate the function again.