How to find and enable the camera on a laptop. How to set up a camera on a laptop

All modern laptops are equipped with a built-in camera and do not need any additional actions for its activation and use. On the computer, the manufacturer must already be presetting the entire set of drivers required for the operation of various laptop functions, including webcams. The camera should be turned on automatically when it is started using its software. Usually it happens if the camera is physically proper. Therefore, buying a new one and the more used laptop to check the performance of its webcam.

How to check the camera on a laptop

1. Try to find through the Start menu on the laptop a program designed to work with the camera. You need to search for names containing the word Webcam or Camera. Specific title It is difficult to lead, as it will be different depending on the manufacturer of the laptop. For example, Sony is Vaio Camera Capture Utility, ASUS - Virtual Camera. If the program is found, start it and check the camera operation. If you do not succeed, then go to the next step.
   
2. Open the "Scanners and Cameras" section of the control panel. Make a double click on the camera image and if it is properly you will see your own image on the laptop screen. The built-in camera is not always displayed in the specified section of the control panel. Therefore, we will consider several more ways to check the camera on a laptop.
   
3. The easiest and most affordable way to check the camera's performance in the presence of a speed connection to the Internet is the use of site sites for video chats. Here are a few of the similar services. If there is no desire to use a dubious service, install on the Skype computer, or use Gmail video chat, which will also allow you to check the camera on the laptop.
   
4. Download one of the programs to work with the webcam. Selecting this class of this class is very large: Webcammax, Cyberlink Youcam, Avacam and many others. It is very convenient to use the so-called portable versions of programs that do not need to be installed. In this case, you can run it on the laptop you are interested in, without installing the program itself. This greatly simplifies the verification process.
   

Thus, a few minutes spent on the performance of the camera's performance can save you from unpleasant feelings that occur when malfunctions are detected, and save you hours and even days, having saved from the need to visit service centers.

More and more PC users on the Internet communicate through not only correspondence and voice communication, but also video calls. But to be able to have such communication, first of all you need to connect the camcorder to the computer. This equipment can also be used to organize streaming, training lessons, tracking the territory and for other purposes. Let's figure it out how to turn on the camera on a stationary PC or a laptop with Windows 7.

Before making the inclusion of the camera on a PC with Windows 7, naturally, you need to connect this equipment to it if it is not built into the housing. Separate article is dedicated to the physical connection, so you will not focus on this procedure. We will consider in detail the procedure inside operating system To activate the camcorder.

Method 1: "Device Manager"

In most cases, when connecting to a computer, a webcam should be turned on automatically, but sometimes it is required to use "Device Manager".

1. Click "Start" And move B. "Control Panel".



2. Open "System and safety".



3. Further in the section "System" Lay item "Device Manager" and click on it.



4. Go to section "Image processing devices" or "Sound, video and gaming devices» (Depends on the type of camera).



5. In the list of devices that opens, find the name of the camcorder you want to connect, and click on its name right mouse button. Presence of paragraph. "Enter" In the displayed menu, it means that the camera is disabled. In this case, you need to click on it.



6. In the dialog box that appears, you need to click "Yes"to restart the computer. But before this, take care to close all active windows and programs in order not to lose the incomplete data.



7. After restarting the PC, the camcorder will be included in the system and is ready for use by intended purpose.

If you do not find in "Device Manager" The name of the camcorder, and this sometimes happens, it will be necessary to additionally update the device configuration.

In addition, it should be noted that for the correct operation of the camera and its proper display in "Device Manager" Requires current drivers. Therefore, it is necessary to install those drivers that were supplied together with video equipment, as well as periodically produce their update.

Method 2: Turning on the camera on a laptop

Modern laptops, as a rule, have an integrated chamber, and therefore the order of its inclusion differs from a similar procedure on a stationary PC. Often, this action is done by pressing a specific key combination or a button on the housing, depending on the laptop model.

The first thing you need is to make sure your webcam included and installed required drivers. In the case of a laptop, we will talk about integrated, with a computer - about connected via an external USB port.

Open Dispatcher Right-click on the icon Computer – Propertiesthen.

Pay attention to the section Processing devices Images.

As you can see, in this case, an integrated webcam disabled. For inclusion You need to click right-click on the camera icon and select item " Cycling».

If you have installed Windows 10. - Next, which will be needed to perform - Check if the camera is enabled in privacy Settings.

Start / Parameters / Confidentiality

Section Camera - Just move slider to the rightIf before that there was a camera disabled.

If we are talking about drivers, then usually for the built-in camera, they are installed along with the installation of the system, if it is not so, it will be necessary download them from the official site and set.

Using a webcam on a computer

With the help of a cord, usually coming in the kit, connect The device to the free USB port of the computer.

The system can pick up the device automatically (By installing the driver from your base) in this case, in the lower right corner you will see a notification of a successful installation.

Or you will see a notification in the center of the screen on readiness to use.

Otherwise, it will be necessary install Drivers Cameras. They must also enter the kit (on a CD), if there are no - download From the official site and install. Installation, in both cases there should be no questions - everything is extremely simple.

For example, for modern Logitech webcams, software wizard Installation as follows.

User agree With the license agreement, selects a place to install the drivers. Then waiting for the successful completion of the installation process may ask reboot Your computer. After rebooting, all changes will take effect.

If you could not find the drivers on the model in the network - you can search by ID (identification number) of the device, often it gives a positive result.

To find out it, you need to go to dispatcher - right-click on an uncertain device icon - Properties.

On the tab Intelligence In the drop-down list, select ID equipment.

Below in the Value field will see PID, try in search. Try to find Required drivers.

As in the case of a built-in laptop, the dispatcher also follows check Is the device enabled. With disabled - cycling.

If something went wrong and the device is not detected by the computer, first check out The state of the wire, during operation it can be worn out and give a poor quality connection. Check out His on others uSB devices. If the connection still will not be able to change the wire.

If everything is in order with the wire and current drivers are installed, and the camera is not active, check in the dispatcher, is it worth it next to the webcam icon exclamation point - If so, then you should try restart Device and reinstall drivers.

Webcam settings

If there is a sound, but no pictures, it will help settings Applications using the chamber.

Often with the installation of drivers installed A special program in which you can configure the device options. You can find it in the button Start – Programs Or with a shortcut on the desktop.

Adjust some parameters You can with help standard application Chamber integrated into recent versions Windows.

To start it, simply enter in search word " Camera».

In the upper right angle of the working window of the application will find the button with settingsBy clicking which it will be possible to adjust them. Unfortunately, there are not so many options as I would like. For more options uses third-party software.

Most popular out third-party applications To work with the webcam is Skype. Here in the main choose video settings. Then go B. settings webcams.

There is an opportunity to increase contrast, shade, saturation, brightness, clarity, strengthening.

There are many more special programs To work with the camera with a wide functional. For example, Webcam Plus Lite, WebcamXP (free), Webcammax (paid for professionals).

We will recommend a small free program with a simple LiveWeBCAM interface. With it, you can take pictures, shooting and of course, configure to your requirements.

For transition B. options Press the button Settings programs. Next, select Image.

Then settings Cameras.

Here you can change a variety of camera options, adjusting it to yourself.

Question from the user

Good day.

Tell me how to make a webcam work. It seems that the driver has already downloaded, 10 times reinstalled it - and it still does not work (shows only the black screen). What else could be the case?

Good day!

Yes, today's Internet, no one is no longer surprised by streaming video, webcams, etc. In general, in general, problems with webcams are not so much, and doing a simple number of steps, you can eliminate the cause of its inoperativeness (if, of course, it is not related to the hardware component - after all, your webcam could just break it).

Why a webcam may not work

1) The camera is simply not active ...

By default, the webcam in the laptop is always enabled and power is supplied to it (it is simply not active in real time - because the camera is not always needed to you, but only during the conversation on the Internet, or when writing a video).

And so that she began to remove the image, it is enough just to run some application that uses it.

For example, in Windows 10, such a program "Camera". It is in the "Start" menu.

If you have Windows 7/8, some problem may occur - because They do not integrate the basic program to work with the webcam. In this case, you can take advantage Skype. or Media Player. Classic. (which is present in each set of codecs).

Addition! About where to download Normal Media Player Classic -

I'll show you on the example of Media Player Classic, as in it to open a picture from a webcam (relevant for all versions of Windows).

After installing the program, go to its settings: "View / Settings" . In the "Capture" section, specify your camera in the graph "video", in the audio - microphone, and in the country - "Russia" (should turn out, approximately, like me on the screen below).

If everything is in order with the camera - the image should appear in the player window.

2) not installed drivers

If the picture from the webcam is not transmitted, it is very often the cause of this drivers (more precisely, their absence). To see if the driver is installed in the system, open device Manager (Click the Win + Pause combination and on the menu on the left you will see a link to its launch).

In the Device Manager, view the tabs. "Cameras" and "Other devices" .

If the driver is installed, then in the "Camera tab" - the model of your device should be displayed if there are no drivers - then in "other devices" will see a note with a yellow exclamation mark on some "Integrated Webcam" (See the visual screenshot below).

Device Manager - Check, Is there a driver on a webcam

You can try to use the driver to update windows feature: Right-click on the "Camera" and in the menu that appears, select.

3) it is turned off in the device manager or in the Windows Control Panel

It is also worth noting that in addition to the lack of driver, the camera can simply be disabled in the device manager. Pay attention to the icon: Does it have arrows on it?

If you have Windows 10, open the Start menu and go to the Settings section.

In chapter "Confidentiality" Open tab "Camera" And allow applications to use the equipment.

By the way, note that at the bottom of the window you can specify the applications each individually, which can be used to use the chamber and which is not.

4) Check the special. Laptop control centers, antivirus.

And there is another moment that can affect the webcam ...

In some laptops there are control centers (running to drivers). They allow you to adjust the power supply of the laptop, adjust its monitor (brightness, contrast, etc.), adjust the keyboard in detail, the touchpad.

Often there are privacy (security) in such centers in which a limit may be limited to using a microphone and camera. I recommend checking this moment.

By the way, some antiviruses can also block the transmission of the image from the camera, fearing that the attacker's application will be able to gain control over it (and therefore will receive confidential information and about you). Try to turn off the antivirus for a while.

PS.

Alternative not obvious reasons

1) Check out isn't the camera not prisoner Or some sticker. Some users of the laptop I have noticed such a "trick" - people fear that hackers (or tracking software) will be able to take pictures of their personal life and just in case they stick to the chamber. Naturally, in this case, besides the black screen, the camera will not show anything ...

2) Is the webcam not busy Another application? Just if you start at the same time two applications that "want" to use the camera - then it may not be shown in one of them. Try to restart the PC (after reviewing and turning off everything too much), and use only the only software to view the video from the camera.

3) Meanwhile, how you run the program to display the video from a webcam, and how you see a picture on the computer screen - it can pass 10-15 seconds. ! Those. There is a certain pause. Just many users, running the program and see no image after 2-3 seconds. - They believe that it does not work and seek the "cause" of the problem (which is not!).

4) if all of the above did not help, maybe your camera is just broken (Hardware Cause). I would recommend you to buy an inexpensive external webcam (connected to USB port.) In some Chinese store (for example). If you catch a campaign (+ use Cashbek) - you can spend the sowful trifles ...

Supplements on the topic are welcome ...

While this is all.

One of the most sought-after elements is a webcam. It makes it possible to carry out video calls through Skype or other web applications. One of the questions that may arise after the acquisition of a laptop - how to include a webcam on it?

Where is a webcam in a laptop and how to enable it?

First of all, you should find out if the camera is built in this model laptop? If not, then it is possible to connect it as a separate device via a USB connector. However, the camera will be in inactive condition. Therefore, many users wonder: where to turn on the camera on a laptop?

Most laptops have a set of special utility programs, including the presence of a program to work with the camera. Its started using the Start menu, as well as the combinations of fast keys. At the same time, for laptops on which Windows 7 and Windows 8 are installed, a similar sequence of actions are provided to turn on the device.

Instructions for switching on a webcam on a laptop

To enable a webcam, such actions should be made:

1. Check if the camera works. To do this, launch a program that is responsible for managing its work. Alternative option There will be a test of the test, which is done using the menu pressed in the client program window. If the image does not appear, and the menu items are not available, the camera is connected as a device.
2. To manage the work of the webcam, simultaneously press the Fn key and other keys. By making such a manipulation, you will see a picture with a camera containing an ON inscription on the desktop. This will indicate the readiness of the camera to further use.
3. Similar result can be achieved using the means of operating windows systems. To do this, click the Start button, go to the "Control Panel" section and find the Administration tab. Next, using a double click on this tab, you call a window with the "Computer" icon. Then the console window opens. On the window that appears on the left, you need to click "Equipment Manager" and launch a webcam.
4. The screen will have to display a list with a list of laptop devices. You will need to go to the string with the name "Image Processing Device" and open an attached list that is located under the plus icon. You will be visible the name of the webcam. It is necessary to press on it twice and select from the "Enable" menu from the menu. Then you need to confirm the inclusion process, for which we press OK. If you do not find the webcam icon, reinstalling the driver or configure the webcam.