How to set up vibration on Android devices. What to do if vibration stopped working on the smartphone

For many, the vibrootch is very irritable, especially when connected during a call, so users have the need to disable it. We will look at how on Android remove the vibration when you call and set text on the keyboard. For visual examples, these operations will be produced on Lenovo and Samsung phones.

Turning off the vibration during incoming calls and touches to the screen

When the phone comes on the phone, the smartphone (depending on installed mode) Reproduces the melody, while it can be filled with a vibration signal when connecting to the subscriber. You can disable it in the settings. Depending on the model and version of Android, this menu item can be located in various places.

Consider how to remove vibration on the Lenovo phone. To do this, perform a couple of simple steps:

In most phones lenovo. C Android 4.2.1 and above the disconnection of the vibration is carried out according to the method described above.

IN phones samsung This is performed in a similar way, but on some android versions These settings are located in other places. If you are the owner of a smartphone from this South Korean brand, and you wish to remove the vibration when connected, use the following instruction:

After completing these simple actions, your smartphone will never be vibrated when connecting to the subscriber or while touching the screen.

Disable vibration in text set mode

Every day, a person prints several thousand text symbols on the keyboard of his smartphone. Some users permanent vibrootklik is greatly annoying. In addition, the regular work of the motor leads to an accelerated battery discharge. To disconnect the vibrootch on the phones from the manufacturer Lenovo, you need:

In most lenovo models With Android Operating System 4.x.x. This instruction allows you to disable key vibration.

For Samsung phones, supporting vibration when you press the keyboard, the instruction is practically identical:

Go to the "Settings" of a mobile phone.
Click "Options" (or "My Device").
In the menu, go to "Language and Enter".
Select "Samsung Keyboard".
In the settings, remove the vibration.

These actions will allow you to remove the vibration plate when typing. On the same page there are other keyboard settings, in particular, you can turn off the keys sounds.

If for some reason you failed to disable the vibro-block of an incoming call, you can try to do this with a third-party program. One of them has the name Customize Vibrance.

The main purpose of this program is to establish a certain "melody" of vibration for each action, for example, termination of the call, or a new SMS message. But in it you can completely disable vibration. For this you need:

In some cases, the source of vibration can be sourid app, for example, "classmates" or "in contact". When receiving a message or any other notification, the phone can automatically vibrate, even despite settings set. To disable it, follows this application Do the following actions.

Users have long been accustomed to the fact that there are a vibration function in mobile devices. This makes it possible to understand the need to answer the call when you are in noisy place or, for example, configure alerts from various applications. Options for using this function quite a lot and everyone should decide how much it is necessary for him and whether it is necessary at all.

Now we are talking about how to manage vibration in smartphones and tablets running the Android operating system. The thing is that there are several important nuances that you really need to know everything without exception to the owners of such gadgets. Do not be lazy to spend a few minutes on reading this article and will surely hand over something new.

How to turn off the vibrootkill when you click on the device buttons?

By default, most tablets and smartphones vibrate each time you press the buttons, as if confirming that the user really performed the action. If you do not like it, you can turn off the vibrootklik, by following the actions below:

Go to the "Settings" of the device.
Select the "Sounds and Notifications" section.
Disconnect the vibrootkolik, shifting the appropriate slider to the left.

Note: here and in the future appearance The menu and the names of the partitions may differ depending on the version of the operating system and specific model Smartphone / Tablet.

How to turn on the vibro-block keys?

It is easy to guess that in this case the all the above procedure should be done, with the exception of one part - the vibration clock setting slider should be moved to the active position.

Is it possible to set up a vibration signal for text messages?

Enable or disable vibration exclusively for SMS messages with standard Android operating systems is not possible. It is best to use special applicationsFor example, Customize Vibrance, which you can learn more about, continuing to read the article. There, for these purposes there are all the necessary options that should be used.

Setting up vibrootrick for games and applications

But if we are talking about the software installed on the smartphone or tablet, then there should be no problems with the vibration setting. Most applications have your own settings menu where you can control sound and vibration. It remains only to find them and change it so that you can comfortably use software.

Why does the vibration may not work?

Many users at a certain point are faced with the situation when their gadget suddenly ceases to vibrate when calling, notifications and so on. If all the settings are exhibited correctly, then you should think about what could be the cause of the problem.

Below are the main causes of vibration failure:

It works incorrectly. Sometimes operating system Android is typically exposed to a variety of failures. The reason may be in recently installed firmwareAfter all, when the usual user is engaged in this, the consequences are unpredictable.
Third-party applications come into the conflict with the OS. This is especially true if the vibration ceased to work after some kind of game or program was installed.
A lot of dust accumulated inside the housing. Yes, yes, do not be surprised when dust is stuck under the body, the vibration mechanism can be immobilized. Consequently, to the age of the pore, until the full cleaning is made, the vibration will not work again.
Mechanical impact on the device. It is not difficult to guess that if you step on a gadget or, for example, drop it on the asphalt, the consequences can be unpredictable. Actually, one of the damage is the loss of vibration.

Elimination of problems with vibration

Planning to solve the problem with vibration on a smartphone or tablet? Then do the following:

Check the settings. Believe me, it is better to spend on it for a couple of seconds than then find that the problem was precisely in this.
Restart the device. As in the case of any other problems, the reboot sometimes gives the desired result and after it the gadget begins to function normally.
Make sure the power saving mode is not turned on. Most smartphones and tablets turn off vibration if the battery is almost discharged or a special mode is set.
Update the firmware. Here the main thing is to remember that you should only use original firmwareapproved by the manufacturer.
Contact B. service center. Disassemble the device yourself - this is not the most the best decision. It is better to find a suitable service center and entrust work to its specialists.

How to strengthen vibration?

It also happens that with vibration on the device everything is in perfect order, but its power leaves much to be desired. So, weak vibrational signal is almost impossible to feel if the smartphone is in the pocket of warm sweaters or jackets.

You can enhance vibration using standard settings Smartphone. Most often, the option is in the "Extended Settings" section, where it can be controlled.

In the settings of your device, there is no vibration management or you remain unhappy with the result? Then the time is to talk about the use of third-party applications.

Here are the two most popular programs that everyone can download all right now from Play Market:

Customize Vibrance

This utility offers users unique features. For example, you can adjust the vibration so that it chops the melody from the film "Mission Impossible" or from the legendary game "Mario". There is also the ability to create your own rhythms by adding them to an existing one.

Among additional features It should be noted wide spectrum The moments in which the vibrational should be triggered. So, he can manifest himself when the subscriber took the phone or if the gadget connected to the Wi-Fi network.

Vibration Notifier

This program is somewhat less opportunities, but it does not get worse. On the contrary, all the settings are in front of the sight, and it will be able to deal with them even the most experienced user.

Separately, I want to say about the free app and its stunning stability. So you will see any bugs here does not arise from the word at all.

How to turn off / disable vibration with incoming calls?

Go to the "Settings" section.
Select there the "Sounds and Notifications" menu item.
Click on the icon in the form of a gear.
Find the "vibration" string (with incoming calls), after which you move the settings slider into an active or inactive position.

Output

Summing up, I would like to note that vibration is one of the most useful features modern smartphones and tablets. Unlike many other developments that appeared many years ago, the vibration did not lose their relevance and is still a mandatory element of any mobile gadget.

It remains only to learn how to control this feature and set it up for yourself. Try to deal with this issue today, because when it comes to work with mobile devices, the convenience of this very work depends exclusively from you.

Indispensable function modern phones - Vibrating signal, and every person who has a mobile, faces need to take advantage of it. When vibration does not work on the phone, it brings inconvenience. Some users feature fundamentally needed, for example, when there are small children in the house. There are cases when the vibrator ceases to function, and then triggers again, and it happens periodically.

Nowadays, this problem is not catastrophic and can be solved by the user himself, but will deliver a lot of trouble. The main thing, with such a problem situation, is to figure out why it happened so. The reasons for such behavior of the equipment are somewhat and tell about them in detail in this article.

To begin with, consider specific cases of problems with this feature:

Does not work at all when "Inclusive" mode in the call settings.
Periodically disappears.
It turns off when the battery has a low charge percentage (often related to automatic inclusion Energy saving mode. With its manual disconnection, the operation of the function will resume, however, the battery will "sit down" faster).
No vibration signals when starting / disable mobile applicationsAnd also when the charger is connected.

Note that each of the cases has its cause. To understand, because of what happens so easy.

The reasons

There are two main groups of factors that determine the operation of the vibrating alert:

The problem is in mechanics, that is, a motor who is responsible for the vibrational signal is damaged. To this refer:

The accumulation of garbage, dust in the case. This spoils the connection between the motor responsible for vibration and the internal fee.
The influence on the "filling" of the gadget moisture, which causes damage to the contacts.
Strokes or drops of the gadget. This leads to a violation of the housing integrity, can shift or damage the mechanism responsible for this mode Work.
Defective details of the smartphone. The frequent problem of cheap gadgets from the Middle Kingdom.

The phone functionality is broken. This includes:

Software works in the product, which is shuffling the work of vibrating signal.
Software generates errors.
Glitch in the work of a specific program.

Ways to correct breakdown

Before checking the motor's motor, you need to make sure that the settings are "not shot down", and the vibration is turned on. To do this, in the Settings menu, check the "Vibration" item - it can be simply disabled. It is also recommended to see separately how calls, SMS, Vibro-response are adjusted. The root of the problem may be there.

If everything is settled, do full reset settings. It is important to remember that before performing this action, you should transfer files, documents, as well as important information For a separate drive. As a rule, is a forced measure and entail a complete loss of your data.

other methods

In the event that no of the proposed options did not bring the desired results, consider the following tips:

Replacing the entire module or mobile repair. Such a breakdown is one of the typical faults. this type Technique. Any master can solve it simply disagreeing the case and correcting the motor. This procedure may have at home, having required tool. If you do not understand what is inside your smartphone - you can choose a simpler option: attribute a gadget to check by a specialist. DIY repair At home, let a simple way, but the risk is mistaken or aggravated by the situation - great.
Update firmware. Such a procedure is extremely undesirable to conduct without a proper level of training. If you do not want to turn your smartphone into a useless brick, we advise you to contact the specialists.

Conclusion

When handling the phone, be careful and attentive. It is important to monitor the cleanliness of the case, always avoid moisture from entering the equipment, clean the accumulations of dust. Do not allow mechanical damage - This displays a mechanism that creates vibration, and may also cause a program failure.

Before making any actions, find the cause of dysfunction of vibration signal. Check if you can eliminate it on your own if you doubt - consult professional help.

Video

If you have a need to remove the effect of vibration, accompanying incoming calls and messages on the iPhone, then it is very easy to implement. To do this, make only a few simple actions.

In contact with

The so-called vibrator turns out to be convenient not for all users. For example, if the communicator lies on a solid surface, then when the effect of vibration is triggered, it makes loud, acting on the nerves of sounds. Engineers apple companies Provided in their gadgets the possibility of turning off the vibration.

How to disable the vibration effect with incoming calls, notifications and iPhone messages

1 . First of all go in Settings devices;

2 . Then choose the menu item " Sounds»;

3 . In chapter " Vibration"There will be a tumbler (" During the bell"And" In silent mode"), That should be translated into the" oFF».

4 . Immediately after this, the vibration will be disconnected. At the same time, it does not matter, in what mode the smartphone is on this moment - in the usual or silent.

How to turn off the vibration in the iPhone alarm clock

Agree that the sound of the vibration on the alarm clock is sometimes very close, especially with a smooth relaxing melody. On how to disable vibration on the iPhone alarm clock, we have devoted a whole separate article.

How to remove (turn off) vibration on the iPhone at a certain time

Why, with an incoming call on the iPhone, the sound is not heard, but only vibration?

The answer is simple: on the case smartphone iPhone. There is a switch that translates the device into a silent mode. It is with it that you can turn on and off the voice acting of incoming calls, messages and notifications. The snapshot below the silent mode is enabled.

Android users get feedback About the performed actions through the vibration block of the keyboard. What if this feature interferes? The answer is simple: remove! Any owner of a smartphone or tablet can control vibration on its device: Configure it for calls, messages, various notifications or completely disable.

How to turn off the vibrootklik at the system buttons of a smartphone or tablet with android OS

If you do not like that the device vibrates each time you press the key, or you just want to save the battery charge, you can disable the response. This is done like this:

How to install the vibrootch system keys

If you, on the contrary, like how the device is responded with vibration when typing, it is necessary to do the steps described above, with the exception of the last stage. When you go to the settings of sound notifications, you will need to move the slider to the active position.

Turn on Android vibrootrick for system buttons

How to manage a vibration clock: video

For what reasons vibration on the device with android can aby

There are a number of reasons why vibration does not work. Most often it happens when charging the gadget. If you define exactly, in what situations the vibrootklik gives failure, it will be easier to eliminate the problem.

Vibration does not work if:

the function is disabled in the notification settings;
third-party programs conflict with the system;
under the device, dust and dirt have accumulated, which do not allow the gadget to launch vibration;
the device was mechanically exposed (for example, fell on asphalt);
software is incorrectly functioning due to the factory marriage or unsuccessful firmware.

To eliminate the problem independently, do the following:

Make sure that the vibration slider settings are in an active position.
Restart the device and check if the response works.
Update the firmware. If the problem was to software, then she will eliminate.
Make sure that the gadget is fully charged and is not in power saving mode, because in this case the device saves energy and can disable vibration for this.
If nothing helped and the problem persists, contact professionals for diagnosis and repair.

How to Strengthen Vibration on Phone and Tablet with Android

If there is a vibration adjustment menu in the keyboard settings, you can enhance the response yourself. Just go to "Settings" and move the slider:

Strengthening the vibration color on the keyboard used in Android through the "Advanced Settings"

If the gadget does not provide extended settings, it is recommended to use special programs of Google Play.For example, Customize Vibrance.

Customize Vibrance - application for creating and setting up vibration styles

With this utility you can adjust the vibration intensity, set a certain rhythm, for example, the imperial march. You will even be able to configure the gadget so that the response is triggered with certain actions, for example, if the subscriber took the tube or a wireless connection appeared.

Adjust the response through the Customize Vibrance:

You can create a response in two ways: "to dismiss" the rhythm finger across the screen or enter some kind of phrase that the program considers and converts into ripples.

Vibration Notifier - Vibration Management Program

Another simple and stable utility capable of helping to set up a vibration signal on the smartphone. It can be downloaded to Google Play. You choose the action when the vibration will be performed, and the rhythm.

Program Interface VIBRATION NOTFIER Pretty ascetic

How to turn off / enable vibration when calling

Is it possible to change or increase the vibration signal for SMS notifications

Disable or enable a response only for text messaging internal android It is impossible. To do this, use third-party services, such as Customize Vibrance. Choosing an "on the incoming SMS" item, you can easily configure vibration for SMS - you will be offered several styles at once.

How to set up program response

You can manage application notifications directly in their settings. How to do this, consider on the example of Viber.

How to remove the response while touching the keyboard

To disable vibration when you press the keys, do the following:

Android engineering menu: how to find out if vibration works

Android smartphones and tablets have a special engineering menu in which you can check the help of the vibromotor. The user is also open to the user - you just need to dial a certain code in the embedded application for calls.

Combinations needed to enter the engineering menu - Table

To check, select the "Vibrator" section.

Using the engineering menu, be careful, otherwise you can harm the phone. If you want to change any parameters, it is better to save their initial values \u200b\u200bso that then you can "roll back" to them.

In the engineering menu you need to choose Vibrator

How to use Android Engineering: Video

Vibrootklik on smartphones and android tablets Pretty flexible is configured under the needs of users by standard tools. If your own gadget capabilities are not enough, it is recommended to download one of the programs from Google Play - Customize Vibrance or Vibration Notifier.