How to install updates in Windows 10. Setting up automatic update using PowerShell

The article describes in detail how to disable Windows 10 update carried out in automatic mode. You do not always know that Microsoft is applied in the next post of updates, but to refuse to download and install updates in the "dozen" without using administrative capabilities or special utilities, it is impossible.

With strangers softwareBy the way, you should be careful, because such utilities can be carried out in the background and other operations, in addition to disconnecting the update center.

Constant downloading of updates and alerts about it, their installation and requirements will restart the computer, errors that are accompanied by any of the steps, as well as the consumption of precious traffic from users with wireless Internet - these are the main reasons to refuse automatic update Windows 10.

Let's start, perhaps, with a method that will be more understandable to novice users due to the lack of need to dig in the system tools, and is suitable for any editorial board of Windows 10.

Note that the next way to disconnect updates (by means of a group policy editing tool) on the home edition of the "dozens" does not work - this is a simplicity of administration tool in the home-version.

The essence of the method is to stop and disconnecting the service responsible for downloading and installing update packages. To do this, we do the following actions.

1. Run the "service" snap.

The easiest way to do this by executing the "Services.msc" command through the command interpreter, which opens with the combination of hot key Win + R.

After that, the window will appear with the name "Service". Its functionality will allow you to disable the automatic start of the service and complete its operation in the current session.

2. Find a service with the name "Center windows updates"(In some editors, the English name" Windows Update "can occur and perform a double click on the element to call its properties.

3. Click "Stop" to complete the service.

4. In the "Startup Type" drop-down list, select the "Disabled" item.

5. Apply new configuration Systems.

Changes come into force without restarting the system. The automatic update of Windows 10 is included in the same way: first set the automatic service start, and then run it.

We use the functionality of the Group Policy Editor

As mentioned, owners home version "Dozens" This section will not help, when using Pro and Enterprise versions of Windows 10, it is recommended that this option is to disconnect the auto update of the system.

Consider how to disable the automatic update of Windows 10 using the administration tool, which is the most reliable method of disconnecting updates.

1. We execute the "gpedit.msc" command.

This is done through the command interpreter, command line Or starting a start line - the result will be similar.

2. Open the "Computer Configuration" section.

3. In the subsection, go to "Administrative Templates", where you open the "Windows components" directory.

4. Go to the Windows Update Directory.

5. Call "Properties" option "Setting an automatic update".

6. Transfer the switch to the position "Disabled".

7. We click "Apply" to record changes in windows registry 10.

8. Close the tool window and check the availability of updates.

If they were discovered in manual mode - this is the norm, new settings can work in a tet-second minute, although automatic check Updates turn off immediately after turning off updates.

The result will be the result if you go to the HKLM \\ Software \\ Policies \\ Microsoft \\ Windows Registry section and create a DWORD key in it with the name "noautoupdate" and the value "1".

Using limit traffic

One of the dozens updates brought the option to its functionality, the activation of which prevents the download of updates when using a wireless or other method of connecting to the network, which is limited. This feature makes it possible to specify that used Wi-Fi Connection It is limit, even if it is not.

Works method on all Windows 10 editions.

1. Go to "Parameters" and open a section that provides access to network settings.

2. Go to the Wi-Fi tab.

3. Deploy "Advanced Settings".

4. Activate the "Set as a limit connection" item in order for the operating system considered a connection with a paid or limited traffic.

Applications to quickly disable automatic update function

Many are familiar with applications to disable spy functions in the "dozen". But such programs exist and to disable the auto-update function of the operating system. Sometimes one application combines both other functions.

One of these utilities is called Win Updates Disabler. To avoid problems, download the application from site2unblock.com and check the downloaded file on the online scanner, for example, on the Virustotal website.

Work with a portable program is simple: We start, mark the first item "Disable Windows Updates" and apply settings. Administrative privileges are required for the functioning of the program.

In Windows 10, as is known, the update tools are not in the "Control Panel", as in the previous versions of the system, and in the "Settings" section (THIS) OS. In addition, in contrast to previous versions, Win 10 also does not have a viewing option and installing selective updates.

Thus, earlier, Windows allowed selectively to set updates of the system itself, individual applications, as well as third-party programs. It was convenient.

At present, time In this mode, you can update only intel driver, as well as Microsoft Silverlight. The rest of the update selectively also can, but in other ways, in particular by hand loading necessary programs or drivers, that in itself stuck.

what updates in Windows 10 can be installed selectively

Obviously, you need to start with clarification, which updates are currently available at the moment. IN Windows 10 This data is no longer displayed, which means you need to search them elsewhere.

Alternatively, you can just download and install additional package troubleshooting tools " Show or hide updates ", Which Microsoft has been offered at some time on the company site in the Support section . The prog checks and shows the available updates for Win 10, installed applications And new versions of drivers for the "iron" used.

As an alternative (and simpler) option to solve the same question you can try windows application Update Minitool ( link ). It is free, it works even without installation and looking for updates no worse than the mentioned Microsoft-Ovsky software instrument.

Updates programs I. fresh versions Drivers Minitool. Groups in separate lists. With "firewood" it is especially convenient, because then you only need to choose the desired from the list, open " »Windows 10 and therefore run the procedure for updating the driver of the corresponding device. Not ababa that, of course, but in general, it makes it easy to save time.

This article shows various methodsWith which you can disable the automatic system update in operating system Windows 10.

Windows Update Center is an important and essential component of the operating windows systems. Windows Update Center regularly checks Microsoft servers for available updates, critical corrections or device drivers. Once the updates become available, the Windows Update Center reports this and offers to download and install them. This is very important because updates increase system safety, performance, reliability and stability.

Previous versions of the operating system allow you to configure the update center. In the settings, you can select how to upload and install updates: automatically or manually, you can also select which updates must be installed, and which are not; You can completely turn off the check for updates. This allows you to make a decision on the feasibility of installing certain updates.

In, Microsoft has left users without any choice: editors Windows 10 Pro. Allows you to postpone the installation of updates only for a while, while users Windows 10 Home. Not even given this opportunity. In other words, a new version The operating system loads and installs updates automatically and without notifications. In principle, there is nothing wrong with that, but in fact it is not at all. Often, updates are the cause of various problems, for example, after installing the next update, the system simply stops loading.

Still, in Windows 10, it is possible to take control of the system update process. Next, the article describes all possible methodsthat will work in all publications of the operating system: Windows 10 Home, Pro, etc.

Configure Windows Update Using the "Advanced Parameters" section (except HOME Editor)

With this method, you can postpone the automatic download of some updates at least for a while, as well as prevent the automatic restart of the computer. Fully disable or block updates with this method you will not be able to.

Open the "Parameters" panel, for this click on the taskbar button. "Start" and select "Parameters"

Also, the "Parameters" panel can be opened by pressing the keyboard key + I

In the opened panel "Parameters" Choose "Update and Security"

In chapter "Windows Update Center" Press "Extra options"

In the additional parameters, select "Notify about reboot planning". With this action, you forbid Windows to automatically restart the computer after downloading and installing updates.

Also turn off the option "When updating Windows, provide updates for other Microsoft products" After throwing the corresponding checkbox.

Now activate the parameter "Postpone updates" By installing the appropriate checkbox. When this option is enabled, new updates will not be downloaded and installed for several days or months, with the exception of updates for the security system.

In the window "Select how and when to receive updates" Set the switch "Update from several places" In a state "Off". This will help in saving Internet traffic, as this feature works on the principle of P2P technology or torrent clients, which is described.

Disabling automatic load drivers

Windows 10 allows you to prevent automatic loading and installation of drivers.

To do this, press the keyboard key + R and in the dialog that opens Perform Enter the command:

Rundll32 newdev.dll, DeviceInTernetSettingUI

Press the key ENTER

In the window that opens "Device installation options" First select "No, provide the choice of choice", and then "Never install drivers from Windows Update". Press the button Save

After that, Windows will always search and install drivers from a computer, and to the update center, the system will only access the system if the appropriate driver is not found on the hard disk.

Hiding or block updates using
SHOW OR HIDE UPDATES Tool

Even before the official release of Windows 10, Microsoft has released a program Show or Hide Updateswhich returns to the system the ability to hide the required driver updates or system updates.

Download tool Show or Hide Updates by

Then click "Hide Updates".

On the next screen, select in the update list you want to hide, and after click "Further". If a hidden updates You later want to return, instead "Hide Updates" Select option "Show Hidden Updates"

Installation wireless network as limit connection

This is one of the ways to prevent Windows 10 to automatically download and install updates. To the system does not load new updates, you just need to configure the Internet connection as a limit connection.

Open the panel "Parameters" and select "Network and Internet"

In chapter "Wi-Fi" Go to "Extra options"

Set the switch "Set as a limit connection" in the Regulation "On".

Now Windows 10 will not automatically download and install new updates until your internet connection is specified as limit.

Setting up updates in the Local Editor
group Policy and in the registry editor

Although Microsoft delete the ability to download updates, but update settings via the local group policy editor and are still working.

In the editorial office Windows 10 Home. absent, however if you have a version Pro.You can enable or notifications about downloading and installing, or automatic download and installation notification, or automatic download and scheduled installation.

Note. Since Microsoft completely replaced the old update center with a new modern application, the group policy settings or registry tweaks come into force immediately. Even after rebooting the computer or execute the command, you will not see any changes in windows window Update. That is, if you open the update settings, you will find that the option is still on. "Automatically (recommended)".

So how to force Windows 10 to apply a group policy or a change in the registry? In fact, very simple. You just need to click on the Windows Update Center.

Once you click this button, the system immediately apply changes, and when you open extra options In Windows Update, you will see that new settings have been successfully applied.

To make changes to the Local Group Policy Editor, press the + R key combination and in the dialog that opens Perform Enter the command:

Press the key ENTER

In the Local Group Policy Editor window, follow the next way:

Computer Configuration → Administrative Templates →
Windows components → Windows update center

On the right side of the window, double-click the policy parameter. "Setting up automatic update"

In the window that opens, click "Included"and in the section "Parameters" Select one of the options proposed:

■ 2 - Notifications of download and installation
■ 3 – automatic download and installation notifications
■ 4 - automatic download and installation on schedule
■ 5 - Allow the local administrator to select Parameters

Press the button OK.

Selecting the last option, you will have the ability to select the parameters in the drop-down list on the Windows Update Settings page.

After selecting the first option, when new updates appear, the system will notify you about them using, and when you click on such a notification, Windows update center window will open with a list of new updates and the ability to download them.

■ If you need to completely disable updates, use the registry editor.

Perform Enter the command:

Press the key ENTER

In the Registry Editor, go to the next section:

HKEY_LOCAL_MACHINE \\ SOFTWARE \\ POLICIES \\ Microsoft \\ Windows

Create a new section in the section and name it. WindowsUpdate..

Create another section (subsection) in WindowsUpdate. And name it AU.In order to result in the following registry branch:

HKEY_LOCAL_MACHINE \\ SOFTWARE \\ POLICIES \\ Microsoft \\ Windows \\ WindowsUpdate \\ AU

Now select section AU. and on the right side of the window create a new parameter DWORD (32 bits) With name Noautoupdate. And give it a value of 1.

Parameter Noautoupdate. with value 1 is similar if in the editor of local group policies to set the automatic update to set the value "Disabled".

Close the registry editor, open Windows Update Center and click "Check availability"To apply changes.

Opening additional windows settings Update, you will see that checking the availability of updates is no longer functions.

To return everything as it was, just delete the parameter Noautoupdate. or set the value 0

Disconnection windows services Update.

Another way that allows 100% blocking download and installing updates in Windows 10.

Press the + R key combination and in the dialog that opens Perform Enter the command:

How to disable Windows Update - this question is specified by users who need to prevent the installation of the system updates to the computer. When default settings, the operating system independently searches for automatic mode, downloads and installs updates released for Windows.

Corporation, with a frequency of about once a month, releases update packages for the Windows operating system. From time to time Microsoft makes unscheduled updates designed to solve emerging problems in the operation of the OS, or closing the detected bars in the Windows security system.

The main part of updates relates to the security of the system. When installing updates, system fixes are applied or some new features are added.

In addition to regular updates, the so-called major updates come out in Windows 10, after the use of which, essentially, a new version of Windows 10 is installed on the computer. Similar major updates come out with periodicity once or twice a year.

Some parts of users disables system updates for various reasons. The main reasons for the failure of Windows updates:

sometimes it happens that after installing updates, the regular windows work and installed programs;
if the user has a limited connection on the Internet, download updates affects the size of the traffic consumed;
lack of free space on computer disk;
after applying the update, the user fears to lose the activation of the operating system;

How to disable automatic update? You can solve the problem using the system of the system, or with a third-party software. In this article, we will look at 5 ways to disable updates to Windows 10 by means of the operating system.

Just disable Windows Update (Windows Update) to dozen, as in Windows 7 or in Windows 8 will not work. Maximum, what can be done in this way: to suspend updates for up to 35 days.

How to disable Windows 10 automatic update (1 method)

Windows 10 means are detected automatically, download and install updates to a computer.

On Win 10, you can disable updates in the way that the Windows Update Service Center will be disabled. This method works in all windows versions 10, it provides Windows Update Forever.

Enter the Administration from the control panel, or with the easier method: in the "Search in Windows" field, enter the expression: "Administration" (without quotes), and then open the Administration window.

In the "Administration" window, click two times the right mouse button on the "Service" label.

In the "Services" window that opens, in the "Services (Local) section, find the Windows Update Service.

In the "Properties: Windows Update Center ( Local computer) "In the General tab, change the" Startup Type "setting to the" disabled "value.

In the "Status" setting, click on the "Stop" button to stop the service window updates 10.

After that, Windows 10 updates will stop coming to the computer.

To enable the automatic update function, in the Properties window: Windows Update Center (Local Computer) »Select a preferred start type:" Automatically (deferred launch) "," automatically ", or" manually ".

How to disable Windows 10 updates using the Local Group Policy Editor (2 methods)

Now let's see how to disable Windows Updates 10 in the Local Group Policy Editor.

note that this method Not suitable for Windows 10 Home (Windows 10 Home) and Windows 10 Single Language (Windows 10 Home For One Language). This feature is present in senior versions of the operating system: Windows 10 Pro (Windows 10 Professional) and Windows 10 Enterprise (Windows 10 Corporate).

First you need to log in to the Local Group Policy Editor. In the "Search in Windows" field, enter the expression "gpedit.msc" (without quotes), and then run the editor.

A different way to the local group policy editor can be logged in the following way: press the "WIN" + "R" key, enter the "GPedit.msc" expression in the "Open" field, and then click on the "OK" button.

In the Local Group Policy Editor window, follow the path: "Computer Configuration" \u003d\u003e "Administrative Templates" \u003d\u003e "Windows components" \u003d\u003e "Windows Update Center".

In the Windows Update section, find the "Automatic Update Setup" item, click on it right mouse button, and in context menu Select "Change".

In the Automatic Update Setup window, activate the "Disabled" setting, and then click on the "OK" button.

After that, the operating system will not search for, upload and install automatic updates Windows 10.

Disable Windows 10 update in the registry editor (3 methods)

The third way to disable Windows 10 updates is made to the registry editor. This method works in all versions of Windows 10.

In the "Search in Windows" window, enter the "regedit" expression (without quotes), and then execute the command.

In the Registry Editor window, go along the way:

HKEY_LOCAL_MACHINE \\ SOFTWARE \\ POLICIES \\ Microsoft \\ WindowsWindowsUpdate \\ AU

In the registry editor window, right-click on free place. In the context menu, select First "Create", and then "DWORD Parameter (32 bits)". Give the name to the parameter: "Noautoupdate" (without quotes).

Click on the "NoAutoupdate" parameter with the right mouse button, select "Change ..." in the context menu.

Enter the "1" (without quotation) parameter in the "value" field, click on the "OK" button.

To turn on the update in Windows 10, you need to change the parameter value to "0" (without quotes), or simply remove the NoAutoupdate parameter from the registry.

Enabling the limit connection in Windows 10 (4 method)

This method allows you to configure a limit connection in the Windows operating system, in case access to the network is carried out via Wi-Fi.

Perform the following sequential steps:

Enter the system parameters.
From the "Parameters" window, go to "Network and the Internet".
Enter the "Wi-Fi" setting, click on the "Management of Well-known Networks" link.
Choose your own wi-Fi network, Click on the "Properties" button.
In the "Set as a limit connection" parameter, move the slider to the "Included" position.

After that, the Windows 10 operating system will limit the search and receiving updates. In this method, some updates will be installed in the operating system. Large updates such as OS version updates will be disabled.

Disable access to the Windows Update Center (5 method)

In the new versions of Windows 10, after the user is turned off, after a while the service of the update center on the computer is enabled. Therefore, we need to block Windows update access to Microsoft update servers.

First disable Windows Update Service (see 1 method).

Complete along the way:

HKEY_LOCAL_MACHINE \\ SYSTEM.

Right-click. Select "Create \u003d\u003e" Section ". Give the name "Internet Communication Management" section (here and further without quotes).
Click on the "Internet Communication Management" section, create in the new section called "Internet Communication".
Log in to the "Internet Communication" section, click on the right places right-click.
In the context menu, select "Create" \u003d\u003e "DWORD parameter (32 bits)".
Give the name to the "disablewindowsupdateAccess" parameter.
Click two times the left mouse button by the "DisableWindowsUpdateAccess" parameter. In the "Changing the DWORD parameter (32 bits)" window, in the "Value" field, select "1".

In the Registry Editor, follow these steps:

Enter the section:

HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows \\ Currentversion \\ Policies \\ Explorer

Create a "DWORD parameter (32 bits)", assign the name "NowindowsUpdate" with the value "1".

Create a new parameter in the registry editor window:

Complete along the way:

HKEY_LOCAL_MACHINE \\ SOFTWARE \\ POLICIES \\ Microsoft \\ Windows \\ WindowsUpdate

Create "DWORD parameter (32 bits)", assign the name "disablewindowsupdateAccess" name with the value "1".

Close the registry editor window, restart the computer. When checking the availability, the Windows update center will show the error "0x8024002e".

To enable access to Windows Update Servers, delete previously created parameters from the registry.

Turn off automatic update on the command prompt

To stop, and then disable the automatic update service, use the command prompt:

Run the command prompt on behalf of the administrator.
Complete the following commands:

Net Stop Wuauserv SC Config Wuauserv Start \u003d Disabled

To start and enable automatic update service, run the following commands:

NET START WUAUSERV SC CONFIG WUAUSERV START \u003d AUTO

Disable checking for updates in Windows 10

If nothing helped, disable the availability of updates in Windows 10. If automatic check does not work, it means that updates will not download to the computer.

To disable updates check, follow these steps:

Run the command prompt on behalf of the administrator. In the command line interpreter window, enter the command, and then press the Enter key:

TAKEOWN / F C: \\ Windows \\ System32 \\ usoclient.exe / a

Go along the path: C: \\ Windows \\ System32, locate the file "usoclient.exe".
Click the "USOCLIENT.EXE" file with the right mouse button, select "Properties" in the context menu.
In the "Properties: USOClient" window, open the Safety tab.
Under the "Group or Users" section, click the Edit button.
In the "Permissions for the Usoclient group" window, you alternately remove all permissions for each group or user. Do not forget to click on the "OK" button.

After that, restart the computer.

To restore the permissions of the file "USOCLIENT.EXE", start the command prompt on the name of the administrator, and then execute the command:

ICAcls C: \\ Windows \\ System32 \\ USOCLIENT.EXE "/ RESET

Restart the computer.

If you need, you can manually check and install updates from the Windows Update Center.

Conclusions Articles

If necessary, the user can disable the automatic update of Windows 10 forever using the operating system tools: by turning off the Windows Update Center, in the Local Group Policy Editor, or in the Registry Editor.

Many of those who updated their PCs, laptops and tablets to the most recent version of the Windows 10 operating system were disappointed with the absence of full control of the user from the user to install updates.

This time, Microsoft, hike, decided that the usual user should not think about it, and now we do not have the opportunity to choose separate updates for installation, as well as hide those that are not needed, as it was in previous versions Windows. Fortunately, from this situation there is a way out. And not even one.

Today I want to present you several ways to disable automatic update in Windows 10:

Method No. 1 Task Internet Connection as limited

This method is suitable for those who use a wireless WiFi connection to connect to the Internet.

If you inform the operating system that the connection you use is limited (with limited traffic or payment for traffic), then Windows 10 download updates through it will not be.

To set a WiFi connection as a limit, go to system parameters ("Start" -\u003e "Parameters" or Notification Panel -\u003e All Options Tile), section "Network" -\u003e Wi-Fi.

Click on your connection, and then go down below and select "Advanced Parameters"

In the window that opens, move the switch slider into the included status in the "Set as a limit connection" item.

Method No. 2. Stop Service Windows Update Center

In the search bar, type the text Services.msc and press ENTER. This will lead to the launch of the "Service" program

In the service list, find the "Windows Update Center" and click on it. In the window that opens, select Start Type: "Disabled" and click on the "OK" button.

Now Windows update center will be disabled.

Method number 3. Turn on Windows 10 Update Setup Mode using Local Group Policy Editor

This method is not available to users of Windows 10 home and you can use it in Windows 10 Pro and above.

In the editor, go to "Computer Configuration" -\u003e Administrative Templates -\u003e All Options -\u003e Windows Components -\u003e Windows Update Center -\u003e

Click on this parameter, in the window that opens, set the mark next to "Enabled", then in the Automatic Update Setup menu, select "5 - Allow the local administrator to select Parameters," and then click on the "OK" button.

After that, go to Settings -\u003e Update and Security -\u003e Windows Update Center, and select the method of installing updates with the possibility of choosing them.

Method number 4. Turn off the installation of Windows 10 updates using the Local Group Policy Editor

In Windows 10 Pro and above, do the following:

In the search bar, type the text of the gpedit.msc and press ENTER. This will launch the "Local Group Policy Editor" program.

In the editor, go to "Computer Configuration" -\u003e Administrative Templates -\u003e All Options -\u003e Windows Components -\u003e Windows Update Center -\u003e Setting the automatic update.

Click on this parameter, in the window that opens, set the mark on the "Disabled" mark and click on the "OK" button

Method number 5. Temporarily disable system updates and drivers using Microsoft's branded utility

Knowing that system updates and device drivers sometimes lead to serious problems in our PC, laptops and tablets, Microsoft has released special utilityWith which you can temporarily disable system updates and drivers in Windows 10.