How to configure the seventh iPhone. Configure iPhone as a new

It should be configured to hold it. By not completing it, the user will not be able to apply the capabilities of the phone. Many are mistaken and think that only Apple service centers employees know how to configure iPhone correctly. But you can save on their services. After reading our instructions, each independently without special skills will make activation and configuration of the device.

Selection and installation of a SIM card

Before you configure the iPhone 7, you must correctly install a SIM card into it. In smartphones, Nano Simka is used, which differs from the usual smaller size. This is due to the fact that inside the device there is little space and the manufacturer's company saves it on different modules. It did not exception and the SIM card slot.

to install nano SIM card In an iPhone, you must click on the hole near the tray with the help of a special going with the edge gadget. You can also apply the usual stationery clip. After pressing the tray moves a bit and it should be completely pulled out. Next, you need to install the card in the front tray to the top, shove the tray back and completely switch into the slot. Then enter the PIN code. If there is no firmware for a specific operator mobile communicationsThe phone will automatically determine the operator. If the device cannot determine the network, you need to go to "Settings" and select the "Operator" item.

The first stages of the setup

The iPhone 7 setting starts with such simple actions:

• inclusion - implies pressing and hold within a few seconds the power button until greeting on the screen appears;
• clamping for 3-5 seconds, and then alternately selection of language, countries or region;
• internet connection - used active Wi-Fi network or mobile Internet.

Next, you need to select Enable or disable geolocation services. Their activation will allow you to track the location of the iPhone 7 (which is especially important when you lose or steal the gadget), apply maps and navigation applications, receive weather forecast, etc. Enable and disable geolocation services can be carried out at any time. You need to go to the settings, select Privacy, and then geolocation services.

The "Geolocation Services" feature can be enabled / disabled completely or for individual phone applications. Disabling will allow to extend the battery operation.

At the next step, you need to configure the Touch ID and set the password. Touch ID is a function that allows you to unlock the phone using a fingerprint. The password protects the gadget from the use of unauthorized people and protect personal data. To change it, you need to select "Password Settings".

Then you need to select the configuration method: "New device", "Recovery from iCloud" or "Recovery with iTunes". In the second and third case, you can restore data and accounts from the services that the person enjoyed on the previous smartphone. On average, the recovery process takes from 30 to 60 minutes.

The next stage involves setting accountallowing you to log in to different services and Apple services. You can enter under the existing registered Apple ID (username), create a new account or skip this stage at all.

If you have an account, you should enter it by writing a login and password, which will not be necessary to specify when entering Apple services. Account allows you to download applications and music in App Store., synchronize multiple gadgets, free to perform video calls between them, carry out communication in chat rooms, etc. To get it you must select "Create Aplle ID for free." Next, you will need to specify the date of birth, the name, surname, click "Next".

It is necessary to consider that the creator of the account must be at least 18 years old, otherwise it will be denied registration.

After entering personal data, you must specify an existing address. email Or free to get it in ICloud. It will be a login of Apple ID. Next, you should come up with a password, choose the control question, write down the answer to it, and also enter the backup e-mail. Next, the system will offer to subscribe to updates and news from Apple or refuse it by moving the slider. At the final stage, the Aplle ID setup should take the Terms of Use. It is impossible to miss this stage, therefore it is necessary to press "accept". On this creating Apple. The ID is completed.

Latest steps settings

After creating an account, you want to configure new iPhone 7 have the ability to connect cloud storage ICLOUD information in which will be maintained backups from devices S. operating system iOS, photos, contacts, applications.

Going to the section "Diagnostics", a person must decide whether it is necessary to system mobile device Daily sent a technical and functional report to the manufacturer. Consent to the shipment means that information about the operation of the hardware and software component, as well as errors and failures in it, will be regularly coming into the office of the gadget creators.

During the phone setting, you can select the data display option on the screen: "Zoom" or "Standard". The first option is intended for people with vision problems.

All these stages are not required, you can refuse them from their passage, but they help to better optimize the custom smartphone and use its capabilities to the maximum.

Useful Advanced Settings

Enabling Siri application

To apply the program you need to connect to the Internet. You need to choose such items alternately: Settings ⇒ Single⇒Siri. Next, rearrange the slider to the "On" position. If necessary, it is possible to choose a language for voice commands.

After that, the application can be turned on by pressing and hold the Home button. An image of a microphone appears on the gadget screen, as well as the text "How can I be useful?" Enough to voice the team or ask a question.

You can set the Siri autorun function. To do this, you need to enable the Raise to Speak option. The application will automatically start when the iPhone is raised to the ear.

Installing an application

You can install any program directly from the phone or connecting to the computer. In the first case, the Internet should work on the iPhone. You need to go to the App Store online store, select the application and download it. After downloading, you can run the program. The second installation method involves connecting a mobile device to a laptop or personal computer with iTunes installed. After the computer will "detect" the phone, you must select the App Store store in iTunes, find the desired app there and download it.

Configure Internet

If the operator cellular communication Provides a service for using the mobile Internet, it does not need anything to customize. You should go to "Settings" and select the necessary network.

To get to Wi-Fi, you need to turn it on through a quick menu or "settings". If a person is in the zone where he previously connected to the network affordable in it, the phone will automatically automatically connect to the Internet. In another case, you should select the network from the list available. If it has a password, then for the connection you must first know it.

It is not necessary to trust the setting of the telephone parameters by the sellers of Apple technology stores. Listed in the article tips allow you to understand how to configure iPhone yourself. With their help, it is possible to install a Nano SIM card, set a language and country, connect to the Internet, select the configuration method, create an Apple ID, etc.

And then happened! Finally decided to buy an iPhone 6S, and it is even lies in his packaging at home on the table. Before you start using it, you need to activate and configure the phone.

The first steps

First you need to insert a SIM card. On the phone extracted from the package, it is necessary to find on the right side surface of the connector and insert the cooked SIM card there. To open this connector, it is worth using a special device called I-paper. If the SIM card is not yet purchased, then this action can be skipped. But still it is better to start work fully, so that after activating an iPhona, it was possible to check if there is no one on the phone ready-made settings On the US operator, and how efficient a radio module is.

After the SIM card is installed, you need to turn on the phone. The iPhone 6S button for this is on the right side surface, in its upper part. The phone will turn on if you click on this button and hold for a few seconds. The fact that he turned on will indicate the welcoming inscription appeared on the screen. Then, according to the instructions you need to choose a country of residence and language.

Aphon activation

Now you can proceed to activate the phone. To do this, it must be connected to a computer or Wi-Fi. It is also permissible to use the 3G / LTE network. If there wireless networkThe connection to it is the most convenient option. If it is not available, then you need to choose "Use Mobile Internet" from cellular operator Installed SIM card.
It would seem that you can use the Wi-Fi network from the tablet or another smartphone, but it will not work with an iPhone.

After that, a request for geolocation will appear on the phone screen. You can enable this feature after activation, and you can immediately upon request. Experts recommend the second option.

Then there are three ways to activate the phone on the screen:

• The first sentence "use how" is suitable for the overwhelming majority of users, especially those who work with an iPhone for the first time. As a result, an exceptional settings will be installed on the smartphone.
• If you contact "Restore from copies icloud."The new phone will be recreated all the settings that were on the previous user's iphone. All folders containing applications will also be restored, and all notes and tabs will be saved in the browser.
• The third option to "restore from iTunes copies" will suit those users whose iPhones did not support iCloud, and the iTunes function was used to save the backup.

Those who choose the first activation option, the device will propose to create an account for entering Apple - Apple ID services. Then you need to go to the phone already under your created data and agree with the "conditions and provisions" with a touch at the end of the text.

We have to wait until the device finishes the activation and settings. At the end, the appropriate inscription will be displayed on the screen, and the smartphone will offer to connect various services and protection of the device from someone else's penetration. Almost all the proposed services are free, and they can be immediately included. Different questions will also be asked from the "Diagnostics" and "Display Increase" section. After that, the phone will be ready for work.

Output

If you judge reviews, simplicity use iPhone. 6s and it specifications Call the owners only positive emotions. However, Apple Store is always happy to make sure its buyers. high quality products From the world of technology. Recently, a residence of positive feedback sounds about another product of "apples" - macBook Pro.. However, about this laptop should be told separately.

Pay employees service Center Apple or sellers for setting up the purchased iPhone are completely optional: all the necessary parameters can be installed independently. Instruction, or damage it in the process of configuration will not work under any circumstances.

Large difference between how to set up an iPhone 4S, 5 or 6 plus, no. Principles of settings remain unchanged for several generations of smartphones, only new features are added.

First inclusion

When you start the smartphone, you will be prompted to enable geolocation services, thanks to which "Maps" and other similar applications can determine the approximate location of iPhone using information from available sources (cellular networks, Wi-Fi connection). Geolocation will detect the device in case of its disappearance, Therefore, it is recommended to activate it. If you have not activated geolocation when you start the phone, you can do it at any time in the settings. The only drawback of this technology is the battery charge consumption. Therefore, if you have problems with charging, it is better to turn off the service.

Be sure to leave the geolocation service "Find iPhone"! Without it, to detect a smartphone in case of its theft or the loss will not work!

The next after geolocation will appear the iPhone Settings window. Considering the question of how to recover an iPhone, we have already talked about this function, so we will briefly go through the main points. There are three settings:

If you have a new device, choose the first item to "configure as a new one." The two remaining options are suitable for restoring settings and content after resetting to factory parameters.

For interaction with the majority apple services You will need a special identifier called Apple ID. If you already have an account, enter its parameters to be saved on a new device. If there is no profile, you will have to create it.

Apple IDs can be created or specified in the settings at any time, so it is set to the first including iPhone You can skip.

After an Apple ID, a license agreement will appear on the screen, without the adoption of the conditions of which you will not be able to complete the iPhone setting. It is not necessary to read it: nothing vital there is not indicated.

Security and diagnostics

Starting with the iPhone 5S, a function of determining the fingerprint owner is added to the smartphone - Touch ID.

The scanner embedded in the "Home" button is used to unlock the device and authorization in the AppStore.

Here you can specify a password for unlocking, which will be requested if the fingerprint for some reason does not work. All these operations can be subsequently subsequently in the smartphone settings.

The last window is a request for sending information about the operation of the device to developers. If you agree to automatically send error reports and failures, then iOS developers will be able to fix them faster. After "diagnostics", a long-awaited starting window will appear in which you need to be tapped on the button "Start work". The standard iOS desktop will appear on the screen - you can begin to deal with all its functions and capabilities.

Transfer contacts from the old phone

Refusing to use the old phone, you are unlikely to want to stay without all the contacts that were kept on it. The problem is that in old iPhone models Micro-SIM is used, and in more modern - Nano-SIM. Naturally, no compatibility is coming: the only output is the connection of SIMI through the adapter.

However, you can not suffer with an adapter and SIM cards, and use one useful google service. True, you will have to first transfer contacts to the phone and save them as a CSV file.

If you have not android smartphone, but the usual mobile phoneYou will have to use the branded utility to export contacts to the computer. For Nokia, this is Nokia PC Suite, for Sony - MyPhoneExplorer, etc.

Obtained using the utility and microsoft programs Outlook File with contacts You need to download to your Google profile:

You can transfer contacts to the iPhone through iTunes or save them directly using the Internet connection.

iTunes.

Connect the iPhone to the computer and run the iTunes application:

After pressing the "Apply" button, synchronization will start, with the result that all your records will appear in the iPhone's phonebook.

Internet connection

If you have the ability to connect to Wi-Fi, then transfer contacts will be able to use the computer and iTunes:

Synchronization of records phonebook Start after starting the "Contacts" application on the iPhone.

Often after shopping iOS devices The user does not know what to do with him next, in connection with which the newcomer arises the question: "How to configure the iPhone and start using it"?

According to advanced "yablovodov", the initial setting is an extremely important step, on which the quality and ease of use of the device continues.

The article will describe in detail how to properly set up a new, freshly acquired iPhone.

You will have the opportunity to enjoy all the advantages of "apple" technology and not to pay store managers for the initial settings of your device.

General settings

So, you got an iPhone from the box and press the power button.

If you set up a new "apple" device, then this setting is not mandatory, and you can skip this step by clicking "Next".

If you decide not to skip this step and are in the Wi-Fi network zone, select the desired and enter the password, then click "Next".

In the next window you will be prompted to select: Enable or disable geolocation services.

Important! The work of geolocation services is responsibleGPS module. When it is activated, the iPhone will track your location, use cards, receive an actual weather forecast, be able to change the time zone with your movement and much more. But, moduleGPS strongly spends battery iOS-device.

In principle, configuring new iPhone You can disable geolocation services that can always be connected as they need.

Click "Disable" and confirm your solution by clicking the "Yes" button.

After you have decided on geolocation, you will have a setup screen for your "apple" gadget.

Since we consider a new, "box" iPhone, you need to "tap" on the "Configure as a new iPhone" line.

Creating an APLLE ID account

You switched to the most important process - the settings of the Aplle ID.

With this account, you will later enter the Aplle services, buy applications, music, synchronize multiple devices, make free video calls between them, communicate in chat rooms, etc.

This step is not considered mandatory and you can skip it when you set up a new iOS-device, but experienced "Yablovodes" recommend creating this identifier immediately.

Choose "Create Aplle ID Free"

Important! It should be noted that if the owner of the "apple gadget" at the time of creating an account was not 18 years old, the system will refuse to registerAPLLE.ID.

After the data is entered, the system will ask which mailbox to use. You can enter an existing electronic address, Or get it for free in ICloud.

In this article, consider registration in the Aplle ID with the existing address.

Use current mailbox

• enter your email address available to you;

E-mail address

• come up with a password and confirm it;

Important! The password should consist of at least 8 characters, contain lowercase and uppercase letters and at least one digit. After this procedure, you need to confirm the password and "tap" on the "Next" button.

• Control questions

In order to new user IOS-device had the ability to restore the Aplle ID In the event of its loss, the system offers answers to three questions, which, you can independently choose from the proposed list.

Tip! We answer questions and write answers. You can add your login to the answer list (email address to @ icon) and password. This data should not be forgotten and transmit to anyone!

To restore identification data, you may need a backup mailbox. In the next window, the system will propose to enter its address.

This is not necessarily and you can act at your discretion.

• Updates

In the next window, you can disable updates (default updates included). If you want to receive different spam from Aplle, then leave everything as it is.

Otherwise, move the switch to OFF. And click "Next".

• License agreement

Agreeing with the rules and license AgreementYou are approaching the final stage of the creation of the Aplle ID.

It is impossible to skip it, so "tapa" on the button "I accept", especially since there is no alternative.

After a few seconds, a new official iOS product with personal APLLE ID appears.

Connecting cloud information storage

After creating an account, your iPhone has already become part of the Apple Empire.

With the APLLE ID, you have the ability to configure the cloudy ICLOUD storage, which will store backups of your iOS devices, contacts, photos and applications.

This is an optional setup item and you can refuse it.

But without icloud, the iPhone loses the good part of its functional, so experienced "yablovodes" recommend "tap" on the "Use ICloud" string.

Touch ID, Creating a password and diagnostics

If you are a happy owner of the iPhone-5S, then in the next window you will be asked to configure Touch ID to use your fingerprint instead of the unlock password and as an identifier of your personality when authorizing shopping, etc.

Attach your finger to scan to the scanner located under the screen in the "Home" button.

After the process is completed, proceed to creating a password. This stage is also not mandatory for iOS devices and can be configured at any time.

The last stages in the iPhone setting is an agreement to send data to the diagnostics of your IOS device to APLLE.

Agree or not - this is fully your choice. To start using the device, click in the next window "Start using iPhone".

This basic settings are completed.

iPhone 5 has become a real disappointment for many admirers from Apple. And there is nothing amazing iPhone 4 in this, asked a high, almost unattainable, bar for subsequent mobile devices model Row. That is why, today I would like to do small review phone iPhone. 4, without looking back at the past time! So let's rearrange that in the yard October 2011, it was then that I became the happy owner of this miracle of technology!

Here it is a miracle! Already in hand, and from the magical "apple" world separates only one action - inclusion smartphone iPhone. 4S! It is concerned that even the experienced users of the "apple" before the first inclusion of the new gadget tremble hands ... Ending with lyrics, go to practice.

Before inclusion, we insert into the SIM card to the apparatus, immediately I will immediately drink the experienced iPhone users and reassure newbies, the iPhone 4S does not require a micro-sim, a common sim card is also suitable, so crazy handles, mesing card, are canceled!

They put the map, and finally, press the desired button and we wait until the screen will appear on the screen, if it did not appear - the charge of the battery zero, recharge!

1. New iOS. 5 On iPhone 4S allows you to customize your smartphone without using the Hi iTunes computer, all operations can be done directly on the phone. The first step-choice of the language of the interface, as well as the country of location. Of course, you can choose even Zimbabwe, but it is better to introduce real data, since many programs are subsequently "cling" to the selected region. So, chose!

2. Next, the smartphone honestly ask how to allow or prohibit the definition of your location. You can be sure that this information is not needed by some secret special services and others like him, but the smartphone himself. By resolving the location of the location, you can use Yandex Maps, Google Maps, etc.

3. In the third step of the iPhone, to propose to configure the connections to Wi-Fi and connect to the network. In principle, this step can be performed at any time in the future, but for further configuration, the activation of the smartphone you will have to use the Internet connection. Therefore, we skip the step only if you are going to use a 3G or GPRS connection for settings.

4. In the next step, the smartphone will suggest you wait and enjoy the reasonable work of the device. B by this moment it will register on the network mobile operator., All the necessary settings will receive for the joys of communication and sending messages. It takes the whole process no more than a few minutes.

5. Now the phone will prompt you to restore the settings from the backup (this is if the iPhone you do not have the first). You can do it with using icloud. or clinner when iTunes help. If the iPhone you have the first, select the "Configure New Apparatus" field, or its analogue in your language.

At this stage, the phone is already ready for use and all further steps can be done and then. And at this very beautiful moment, finally, enjoy the feeling that in your hands you are not just a phone, namely, it is iphone 4s. But for the completeness of sensations, we advise you to suffer two more points (there are only two, seriously, there are two).

6. Smartphone will again ask to connect to wi-Fi network, or any other. Next, you need to log in with your personal Apple ID (this is if you are an avid user of "apple", if you are new to the "apple" world, create your Apple ID is completely free.

7. And finally, we accept the Agreement on "Rights and Responsibilities" (we advise you to read the conditions you accept, but as they say, ignorance of laws does not exempt from responsibility). It remains to choose, turn on, or not voice assistant Siri (at the beta test, it is only available in English, German and French, so if the polyglot skills do not bliss-turn off feel free). It remains to decide, send, or no diagnostic reports in Apple.

EVERYTHING! Click the cherished button "Start using the iPhone 4S" and plunge into an amazing "apple" world.

If some of the items of the setup caused bewilderment - boldly put in the comment! We will definitely help, tell me, we will advise.